HB 981 - Blender HYUNDAI - Free user manual and instructions
Find the device manual for free HB 981 HYUNDAI in PDF.
| Product Type | Stick Blender with Chopper and Whisk Attachments |
| Brand | Hyundai |
| Model | HB 981 |
| Power Input | 380 W |
| Speed Control | Button I (low speed), Button II (turbo), Variable speed regulator (HB983 model only) |
| Blender Stick Material | Plastic |
| Measuring Bowl Capacity | 600 ml |
| Chopper Bowl Capacity | 0.8 L (max process 0.4 L) |
| Dimensions (L x W x H) | 8 x 38 x 6.5 cm |
| Net Weight | 0.64 kg |
| Gross Weight | 1.16 kg |
| Power Cord Length | 1.45 m |
| Acoustic Noise Level | 80 dB(A) re 1 pW |
| Maximum Continuous Operation | 60 seconds, then cool down 1-5 minutes |
| Dishwasher Safe Parts | Measuring bowl, chopper bowl, lid, whisk, blade gear box adapter (except motor unit and stick shaft) |
| Non-immersion Parts | Motor unit, blender stick shaft, whisk gear box adapter, blade gear box adapter |
| Safety Features | Safety switch (release to stop), overheat protection, anti-slip base |
| Accessories Included | Blender stick, measuring bowl with lid, chopper bowl with blade and gear box adapter, whisk with gear box adapter |
| Hanging Loop | Yes |
Frequently Asked Questions - HB 981 HYUNDAI
User questions about HB 981 HYUNDAI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Blender in PDF format for free! Find your manual HB 981 - HYUNDAI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HB 981 by HYUNDAI.
USER MANUAL HB 981 HYUNDAI
natural_image
Product photo of a Hyundai brand blender with hand mixer and clear cup (no text or symbols visible)NÁVOD K POUŽITÍ / NÁVOD NA POUŽITIE INSTRUKCJA OBSŁUGI / INSTRUCTION MANUAL HASZNÁLATI ÚTMUTATÓ / BEDIENUNGSANLEITUNG
Ponorný mixér / Ponorný mixér Mikser zanurzeniowy / Stick blender Botmixer / Stabmixer
NÁVOD K OBSLUZE
Doporučení
flowchart
graph TD
A["Cutting with warning symbol"] --> B["Assembly part"]
B --> C["Assembly part with plastic cap"]
C --> D["Assembly part with plastic lid"]
D --> E["Assembly part with plastic bulb"]
E --> F["Product packaging"]
Doporučení
POZOR
natural_image
Illustration of a pipe with water flowing from a faucet, showing steam and exhaust (no text or symbols)ODSTRAŇOVÁNÍ PORUCH
Přístroj nefunguje
natural_image
Symbol of a trash bin with crossed lines and a blank rectangular base (no text or labels)Odporúčanie
flowchart
graph TD
A["Cut into part"] --> B["Pre-cutting"]
B --> C["Assembly step 1"]
C --> D["Pre-cutting component 1"]
D --> E["Assembly step 2"]
E --> F["Pre-cutting component 2"]
F --> G["Assembly step 3"]
G --> H["Final product"]
Odporúčanie
POZOR
natural_image
Illustration of a pipe with water flowing from a faucet, showing fluid and explosion (no text or symbols)ODSTRAŇOVANIE PORÚCH
Prístroj nefunguje
ZALECANE POSTĘPOWANIE PODCZAS OPRACOWANIA SUROWCÓW
flowchart
graph TD
A["Pinning Pin"] --> B["Downward Arrow"]
B --> C["Downward Arrow"]
C --> D["Downward Arrow"]
D --> E["Downward Arrow"]
E --> F["Downward Arrow"]
Zalecenia
UWAGA
natural_image
Illustration of a faucet with water flowing from a pipe (no text or symbols)Usuwanie usterek
PRAWODAWSTWO I EKOLOGIA
OSTRZEŻENIE: ABY UNIKNAĆ NIEBEZPIECZEŃSTWA POŻARU LUB PORAŻENIA PRĄDEM ELEKTRYCZNYM, NIE WOLNO WYSTAWIAĆ SPRZĘTU NA DZIAŁANIE DESZCZU BĄDŹ WILGOCI. URZĄDZENIE ODBIORCZE ZAWSZE WYŁĄCZYĆ Z GNIAZDKA, KIEDY NIE JEST UŻYWANE LUB PRZED NAPRAWĄ. W URZĄDZENIU NIE MA ŻADNYCH CZĘŚCI, KTÓRE BY MÓGŁ ODBIORCASAMODZIELNIE NAPRAWIAĆ. NAPRAWĘ SPRZĘTU NALEŻY ZLECIĆ ODPOWIEDNIO PRZYGOTOWANEMU SERWISU AUTORYZACYJNEMU. URZĄDZENIE ZNAJDUJE SIĘ POD NIEBEZPIECZNYM NAPIĘCIEM.
natural_image
Symbol of a trash bin with crossed lines and a solid rectangle below (no text or labels)Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including the warranty, the receipt and, if possible, the box with the internal packing.
GENERAL SAFETY INSTRUCTIONS
- Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
- Check whether the data on the type label correspond with the voltage in your socket. The power cord plug has to be connected to the properly connected and grounded socket according.
- This appliance must not be used by children. Keep the device and its supply cord out of reach of children. The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers. Children must not play with the appliance.
- Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
- If the power cord of the appliance is corrupted, it has to be replaced by the producer, its service technician or a similarly qualified person so as to prevent dangerous situations.
- Be careful when handling the accessories (immersion blender), the knife is very sharp!
- Be careful when pouring hot liquid into the food processing device or the mixer because it may spurt out of the appliance because of sudden boil.
- In case you are going to process hot liquid (mixing a hot soup with vegetables etc.), be careful because it may spurt out of the container because of sudden boil.
- When handling the sickle – shaped knife, be very careful, especially when removing it from the chopping container, when emptying the container and while cleaning. The knife is very sharp!
- Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged or if it fell to water. In this case take the appliance to a special service to check its safety and proper function.
• Always unplug the appliance from power supply if you leave it unattended and before assembly, disassembly or cleaning.
- When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
- After finishing work and before cleaning, always switch off the appliance and disconnect it from power supply by taking the power cord connector out of the electric socket.
• This appliance is not intended for outdoor use.
- Do not place any objects on the appliance.
- Before preparation, remove possible packages from food (e.g. paper, a PE bag, etc.).
- It is not allowed to modify the surface of the appliance in any way (e.g. using a selfadhesive wallpaper, foils, etc.).
- Do not insert or take out the plug to or from a socket with wet hands and do not pull the power cord!
- Do not use the appliance without the anti –slip base!
- Never immerse the drive unit into water or wash it in running water!
- The product is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
- The appliance must not be used in damp or wet environment and in any environment with the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and other flammable or volatile materials are stored).
- Use the appliance in the working position only at places with no risk of turning over and in sufficient distance from heat sources (e. g. heater, stove, grill, etc.), and wet surfaces (e. g. sinks, wash basins, etc.)
- Caution: Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
- Short-time operating. Use the appliance for no longer than 1 minute, and don't operate hard food for no longer than 10 seconds. Before you remove the appliance or the drive unit from the container, let the rotating parts stop completely.
- Check if the switch is in the off position before each connecting of the appliance to the el. outlet and always unplug the appliance from the el. outlet after finishing work.
- Use the appliance designed for this type only. Using another appliance can represent a risk for the operator.
- Make sure that your hair, clothes and accessories do not get into dangerous vicinity to the rotating parts!
- Make sure the whisks do not hit the walls of the utensils during operation or do not get stuck in the thick matter or frozen ingredients.
- Proper mounting of the bowl lid will release safety locks and you can connect the appliance.
- Do not insert the appliance into any body holes.
- Do not switch on the appliance without ingredients in it!
- Do not remove the appliance if the drive unit is in operation!
- Make sure that the power supply cable does not get between the rotating parts of the accessories.
- Before you remove the appliance or the drive unit from the container, let the rotating parts stop completely.
- Before emptying the chopping container, first remove the sickle – shaped knife.
• Always unplug the appliance from power supply if you leave it unattended.
- Do not process food at temperature exceeding about 60 °C.
- Never insert e.g. fingers, fork, knife, spatula, spoon into rotating parts of the appliance and the accessories.
- If the processed food starts to stick to the appliance (e.g. on knives, the beater, the container or the lid), switch off the appliance and clean the accessories carefully (e.g. using a spatula).
- Check the condition of the power cord of the appliance regularly.
- The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water or bent over sharp edges. Never put it on hot surfaces or do not let it hang over the edge of a table or work tables. Hitting, stumbling or pulling the power cord e.g. by children can result in tilting over or drawing the appliance down and serious injury!
- Do not wind the power cord around the appliance; this will extend its life.
- If you need to use the extension cord, it has to be uncorrupted and it has to comply with the valid standards.
- Never use the appliance for any other purpose than for that described in these instructions for use!
- WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.
- All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
- The producer does not undertake any responsibility for damage caused by improper use of the appliance and the accessories (e.g. food deterioration, injury by knife edge, fire, etc.) and its guarantee does not cover the appliance in the case of failure to comply with the safety warning above.
DESCRIPTION OF THE CONTROLS
P1 Motor unit
P2 Switch I - speed 1
P3 Switch II Turbo
P4 Speed regulator (only HB983 model)
P5 Blender stick
P6 Measuring bowl
P7 Container lid
P8 Blade gear box adapter
P9 Blade
P10 Chopper bowl
P11 Whisk
P12 Whisk gear box adapter
Accessories P6, P7, P8, P9, P10, P11, P12 only for type HB983.
INSTRUCTION FOR USE
Remove all the packing material and take out the drive unit and the accessories. Remove all possible adhesion foils, stick-on labels or paper from the appliance. Before the first use, wash the parts that will be in contact with food in hot water with a detergent, rinse them thoroughly with clean water and wipe till dry, or let them dry.
Safety switch (P2, P3)
Button I – low speed Button II – maximum speed
By pushing and holding the button you will start the appliance and by releasing the button you will switch off the appliance.
Speed regulator (P4), (only for type HYUHB 983)
By turning the regulator you can continuously change the speed of the motor revolutions.
ACCESSORY INSTALLATION
Slide adapter to drive unit, then fix it by turning it. Remove the adapter in the opposite direction.
HOW TO USE THE HAND BLENDER
The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing and milkshakes.
1) The steps to install the blender stick are described in "Accessory Installation".
2) Introduce the hand blender in the measuring bowl. Then press the control switch level I or the switch level II (turbo). The maximum time of processing is 60 sec. Then wait for 1 – 5 minutes, which is necessary for the drive unit to cool down.
3) You can use the hand blender in the measuring bowl and just as well in any other vessel. When blending directly in the saucepan while cooking take hand blender from overheating.
4) Turn the blender stick off the motor unit after use.
Recommendation
- It is recommended to cut tough ingredients into small pieces. Do not process very hard materials (e.g. ice cubes, etc.). The knife would be blunt soon.
– Hard ingredients (e.g. legumes, soya beans, etc.) should be soaked in water before processing. - The longer you process the food with the mixer, the smoother the result will be.
- In the case of liquids that create foam (e.g. milk), never fill in the container P6 up to the gauge mark „MAX“ to prevent overflowing.
- If you are not satisfied with the result, switch off the appliance, mix the ingredients with spatula, take some part of the ingredients or add a little liquid.
PROCESSING GUIDE
| Food Maximum amount Approximate time [seconds] | |
| Children's food, soups, sauces 100 – 600 ml 60 | |
| Shakes and cocktails 100 – 600 ml 60 | |
| Food and vegetables 100 – 500 ml 30 | |
| Dough 100 – 600 ml 60 |
HOW TO USE YOUR CHOPPER
The knife is intended for chopping, mixing, blending all kinds of tough food (e.g. fruit, vegetables, nuts, almonds, meat without bones, tendons and skin) or for preparing purée. Do not use the knife for processing any dough!
1) Caution: the blade is very sharp! Always hold it by the upper plastic part.
2) Place the blade P9 on the centre pin of the chopper bowl P10. Always place the chopper bowl on the anti-slip base.
3) Place the food in the chopper bowl.
4) Place the blade gear box adapter P8 on the chopper bowl.
5) Turn the motor unit on the chopping bowl lid until it locks.
6) Press switch 1 or 2 to operate the chopper. During processing, hold the motor unit with one hand and the chopper bowl/jug the other. The maximum time of processing is 60 sec. Then wait for 1 – 5 minutes, which is necessary for the drive unit to cool down.
7) After use, turn the motor unit off the blade gear box adapter.
8) Then remove the gear box adapter from the chopper bowl.
9) Carefully take out the blade.
10) Remove the processed food from the chopper bowl.
flowchart
graph TD
A["Warning Sign"] --> B["Assembly Box"]
B --> C["Downward Arrow"]
C --> D["Downward Arrow"]
D --> E["Assembly Box with Cover"]
E --> F["Downward Arrow"]
F --> G["Assembly Box with Cover"]
G --> H["Downward Arrow"]
Recommendation
- Before processing, cut bigger pieces of food into cubes of about 3 × 3 × 3 cm.
- Never crush very hard ingredients with the sickle-shaped knife, such as coffee beans, nutmeg, ice cubes, and grains etc.! The knife would be blunt soon.
– Hard ingredients (e.g. legumes, soya beans, etc.) should be soaked in water before processing. - The longer you process the food, the smoother the result will be.
– During processing, hold the motor unit with on hand and the chopper bowl the other. - If you chop hard cheese or chocolate, work for a short time. It is because the ingredients are heated excessively by chopping, they become softer and they can become lumpy.
PROCESSING GUIDE
| Food Maximum amount | Approximate time [seconds] | |
| Meat 300 g 10 -15 | ||
| Herbs 80 g 15 | ||
| Nuts 250 g 15 | ||
| CHEese 250 g 15 | ||
| Bread 1 slice | 15 | |
| Hardboiled eggs | 6 pieces 5 | |
| Onions | 300 g 10 |
HOW TO USE YOUR WHISK
Use the whisk only for whipping cream, beating egg whites and mixing sponges and ready-mix desserts.
1) set the whisk P12 into the whisk gear box adapter P11.
2) The steps to install the wish are described in "Accessory Installation".
3) Place the whisk in the measuring bowl and then press the switch 1 or 2 to operate it. The maximum time of processing is 60 sec. Then wait for 1 – 5 minutes, which is necessary for the drive unit to cool down.
4) Turn the whisk gear box adapter off the motor unit after use. Then pull the whisk out of the whisk gear box adapter.
CAUTION
- Always operate your hand blender in the upright position.
— Never operate the appliance in an empty vessel or outdoors.
- Do not press with your appliance on the material hardly.
Recommendation
- When beating egg whites, use eggs at room temperature. If beating is not optimal, make sure that the beater is not greasy, or add a little lemon juice or salt.
- Before beating egg whites (minimum 2 eggs) make sure that the adapter and the container are dry and without oil residues. Egg whites should have the room temperature.
- Cool cream and whipping cream to at least 6 °C.
PROCESSING GUIDE
| Food Maximum amount | Approximate time [seconds] | |
| Cream 500 g 70 - 90 | ||
| Egg white 4 pieces 120 |
CLEANING AND MAINTENANCE
• Always unplug the appliance from the power supply before cleaning it.
- Remove the accessories before washing them in soap water. Do not clean with any abrasive scouring pad or steel wool, as this will be damage the finish.
- Do not immerse the motor unit and parts P5, P8, P12 in water or any other liquid. Do not place them in the dishwasher.
- Cleaning the motor unit, parts P5, P8, P12 only with a damp cloth only. The end piece with the shaft of the mixer must not be immersed during cleaning!
- All other parts can be cleaned in the dish washer. However, after processing very salty food, you should rise the blades right away. Be very careful when cleaning mixing adapter and sickle-shaped knife. Make sure that the cutting edges of the accessories are not in contact with hard objects that make them blunt and thus they reduce their effectiveness.
- When processing food with colour, the plastic parts of the appliance may become discoloured. But this does not affect the function of the appliance and it is not a reason for a claim. This colouring usually disappears in some time.
- Never dry plastic moldings over a heat source (e. g. heater, stove, radiator).
• Take care that the binding surfaces and the sealing elements are functional.
- Store the appliance after cleaning at a dry, dustfree and safe place, out of reach of children and incapacitated people.
natural_image
Illustration of a pipe with water flowing from a faucet, showing fluid and explosion (no text or symbols)TROUBLESHOOTING
The device is not working
- Check that the mains connection cable is firmly plugged in.
- Check the positions of the switches.
- Check the positions of the accessories.
TECHNICAL SPECIFICATIONS
• Strong engine with input 380 W
• Variable speed control
- Button I (regulated), II (high) speed
- Easy to use
- Easy maintenance
- Hanging loop
• Acoustic noise level of 80 dB(A) re 1 pW
• Power cord length 1.45 m
- Plastic stick blender
• Whipping attachment - Small 0.8 l chop attachment (maximum amount to process - 0.4 l)
- 600 ml working plastic container with lid
- Size: 8 x 38 x 6.5 cm
• Weight: 0.64 / 1.16 kg - Input in off mode is 0.00 W
The manufacturer reserves the right to change the technical specifications and accessories for the respective models. The pictures are only illustrative, the supplied accessory and appliance may differ.
LEGISLATIVE & ECOLOGY
WARNING: Do not use this product near water, in wet areas to avoid fire or injury of electric current. Always turn off the product when you don't use it or before a revision. There aren't any parts in this appliance which are reparable by consumer. Always appeal to a qualified authorized service. The product is under a dangerous tension.
Old electrical appliances, used batteries and accumulators disposal
natural_image
Symbol of a trash bin crossed with no text or labels, accompanied by a black rectangular block below (no readable text or symbols)This symbol on the product or on its packaging indicates that this product (or battery/accumulator) shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE INSTRUCTIONS MANUAL:
HOUSEHOLD USE ONLY
DO NOT IMMERSE IN WATER OR OTHER LIQUIDS
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIESAND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAYPENS. THIS BAG IS NOT A TOY.
material designed for contact with food
NOTICE
KEZELÉSI ÚTMUTATÓ
Tanácsok
flowchart
graph TD
A["Start"] --> B["Step 1: Disinflation Warning"]
B --> C["Step 2: Downward Arrow to Top Cover"]
C --> D["Step 3: Downward Arrow to Top Cover"]
D --> E["Step 4: Upward Arrow to Top Cover"]
E --> F["Step 5: Right-Wing Hand"]
Tanácsok
FIGYELEM
natural_image
Illustration of a faucet releasing water from a pipe with a valve, showing fluid flow (no text or symbols)HIBAELHÁRÍTÁS
Empfehlung
ACHTUNG
natural_image
Illustration of a faucet with water flowing from a pipe (no text or symbols)natural_image
Symbol of a trash bin with crossed lines and a blank rectangular base (no text or labels)Licensed by HYUNDAI Corporation Holdings, Korea