KR14BT - Receiver BLAUPUNKT - Free user manual and instructions

Product Type	Bluetooth Audio Receiver
Brand	Blaupunkt
Model	KR14BT
Bluetooth Version	5.0
Bluetooth Range	Up to 10 meters (33 feet)
Audio Input	3.5mm AUX, RCA (L/R)
Audio Output	RCA (L/R), 3.5mm Headphone
Supported Audio Codecs	SBC, AAC, aptX
Power Supply	DC 5V via Micro USB (cable included)
Battery	Built-in rechargeable Li-ion, 400 mAh
Battery Life	Up to 8 hours
Charging Time	Approx. 2 hours
Dimensions (W x D x H)	8.0 x 8.0 x 2.5 cm
Weight	About 50 g
Material	ABS plastic
Indicator LED	Blue for Bluetooth, Red for charging
Buttons	Power, Pairing, Volume +/-, Play/Pause
Compatible Devices	Smartphones, tablets, laptops, TVs with Bluetooth
Package Contents	KR14BT unit, Micro USB cable, 3.5mm AUX cable, user manual
Warranty	1 year

Frequently Asked Questions - KR14BT BLAUPUNKT

How do I pair the Blaupunkt KR14BT with my phone?

Turn on the KR14BT and set it to pairing mode (press the pairing button until the LED flashes blue). On your phone, enable Bluetooth and select 'KR14BT' from the list. If prompted for a PIN, enter '0000'.

Can I use the KR14BT with non-Bluetooth devices?

Yes, you can connect devices via the 3.5mm AUX input or RCA inputs. The KR14BT will transmit audio to Bluetooth headphones or speakers.

How do I charge the KR14BT?

Connect the provided Micro USB cable to the KR14BT and a standard USB power adapter (5V, 1A). The red LED indicates charging; it turns off when fully charged.

What is the battery life of the KR14BT?

The built-in battery provides up to 8 hours of continuous playback on a full charge. Actual battery life may vary depending on volume and usage.

How many devices can be connected simultaneously?

The KR14BT can pair with multiple devices but only play audio from one source at a time. To switch sources, disconnect the current device and connect the new one.

Why is there no sound from my speakers?

Ensure the KR14BT is powered on and paired. Check that the audio source is playing and the volume is turned up. Verify that the output cables are securely connected to your speakers.

Can I use the KR14BT while charging?

Yes, you can use the receiver while it is plugged in and charging. The battery will charge slower during use.

What is the Bluetooth range of the KR14BT?

The effective Bluetooth range is up to 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.

How do I reset the KR14BT?

To reset, press and hold the pairing button for 10 seconds until the LED flashes rapidly. This will clear all paired devices and restore factory settings.

Does the KR14BT support aptX HD?

The KR14BT supports standard aptX, not aptX HD. It provides high-quality audio streaming compatible with most devices.

USER MANUAL KR14BT BLAUPUNKT

Kitchen radio with Bluetooth

Important Notes

• This safety and operating instruction should be retained for future reference. • The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom. • Do not install the product in the following areas: • Places exposed to direct sunlight or close to radiators. • On top of other stereo equipment that radiate too much heat. • Blocking ventilation or in a dusty area. • Areas where there is constant vibration. • Humid or moist places. • Do not place near candles or other naked flames. • Operate the product only as instructed in this manual. • Before turning on the power for the first time, make sure the power adaptor is properly connected. For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel. Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users' instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
8. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
9. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
10. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
11. The highest environmental temperature suitable for this product is 35°C.
12. ESD hints - If the product resets or fails to operate due to electrostatic discharge, simply switch it off and reconnect it, or move the product to another location.

ERP2 (Energy Related Products) note

This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) No. 1275/2008 implementing Directive 2009/125/EC regarding standby and off mode electric power consumption of electronic household and office equipment.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture, or dust.
6. Do not place this unit close to a strong magnetic field.
7. Do not place the unit on an amplifier or receiver.
8. Do not place this unit in a damp area as the moisture will affect the life of electric components.
9. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
10. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
11. The mains plug is used as disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible.
12. Replacement of a battery with an incorrect type that can defeat a safeguard.
13. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
14. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
15. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

NOTICE

Conformity

Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity can be obtained from the product page at www.blaupunkt.com. Responsible party: 2N-Everpol Sp. z o.o., Puławska 403A, 02-801 Warsaw, Poland, Phone: [phone], E-mail: [e-mail]

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product, it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health. Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

Caution:

To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

Explanation of Graphical Symbols:

The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

Thank you for purchasing our model. Please read and reference the manual before operating this unit. Please keep the manual for future operation reference.

Location of controls:

1-Volume/power/function knob; 2-Timer1/2/Dimmer; 3-Alarm/memory/AMS(scan); 4-Display; 5-Stereo/mono/light on/off; 6-Preset/-search →; 7-Preset +/search +/setup; 8-Timer/play/pause/pair knob; 9-Foldable stand; 10-Battery compartment; 11-Speaker; 12-Power cord; 13-FM antenna

Install backup battery power: push out the battery compartment door (at the bottom of unit), insert 2 AA size batteries (not included). Make sure that the inserted battery is in correct position according to the engraved positive and negative polarity symbol. The battery power is used to backup clock and alarm setting only.

Note:

a. Please dispose of the battery in an environmentally friendly way, please reference and follow the requirements by your local government. b. Please do not install the battery with mixed brands; please take out the battery in case of no operation for a long time to avoid liquid leakage issue.

Using the unit on a table: You can put the unit on an even table. Pull out the stand to keep a better sight and adequate space for sound, as the speakers are equipped at the bottom of the unit.

Wall-mount the unit

Important: You should only use the mounting accessories (included) when you mount the unit. Use of unapproved accessories that have not been designed specifically for this unit may lead to safety hazards.

a. Retract the bottom stand before mounting the unit; use the provided cabinet mounting template to locate where you want to mount the unit. Drill the mounting holes directly then done, remove the template. To reduce the risk of danger, please consult the technician if the location you want to mount the unit is firm enough to hold weights and safe before you do the mounting.

b. Push out the mounting plate (refer to illustration (a)).

c. If you find unit has to be mounted too high to reach, use the supplied long plastic poles. Insert the long plastic poles into the position holes (refer to illustration (b)).

d. Position the mounting plate and fix it on the mounting place with the supplied screws.

e. Slide the unit back to the mounting plate.

Caution: To reduce the risk of fire, do not place any heating or cooking apparatus beneath this unit.

A

B

Power connection and unit on: loosen the attached power cable, then insert the power plug into the household AC wall-mount socket to get the power source. The display will light on, and auto scan and save the available FM stations. Short press down the ON/OFF knob to standby on/off the unit.

Clock time setting: in standby mode, press and hold the setup button for 2 seconds until "24H" digits flash on the display, then rotate the timer knob to select the time format between 12 or 24 hours; press the setup button again to confirm the selection, and skip to set up hours; repeat the previous operation to finish the rest of the setting for hour/minute/year/month/day/RDS/DT (auto dim on/off).

Clock time updating synchronization by RDS: When you select RDS on, there will be a clock icon appear under the clock time on the display; the clock can update synchronously in case there is a clock signal from the broadcasting radio station.

Alarm setting: in standby mode, press and hold the alarm button for 2 seconds until the hour digit flashes on the display, rotate the timer knob to adjust the hours, press the alarm button again to confirm your selection and skip to minute setting; repeat the previous operation to finish the setting for minute/alarm source (radio/buzz/off).

Note:

a. The unit will revert to standby mode automatically in case of no further operation for the last 10 seconds.

b. The alarm will be activated in case of alarming time is being, short press down the ON/OFF knob to cancel the alarm voice, and the alarm setting will remain, and wake up again at the coming time of the next day.

Countdown time setting for cooking: the unit includes 2 set countdown timers (T1 and T2) which are good for cooking. The unit will alert by buzzer in case of the setting time is being. In standby mode, rotate the timer knob to adjust the timer 1 range between 1 min to 3 hours 59 mins, press down the timer knob to confirm the setting, then the T1 icon and countdown time information will show on the display; short press the Timer 1/2 button until the T2 icon flashes on the display, and rotate the timer knob to adjust the timer 2's setting range between 5 minutes to 3 hours 55 minutes, press down the timer knob to confirm it. Then the timer 2 will start to work.

Note:

a. The time format will be "MM: SS" shown on the display in case of the setting less than 5 minutes; and switch to "HH:MM" format in case of setting equal or above 5 minutes.

b. The unit will send a short alarm each when the remaining countdown time arrives at 30s, 15s, 10s, 5s; and become continuous alarming when the time is being; short press down the ON/OFF knob to cancel the alarm.

c. When only one countdown time is set up, regardless of whether it is Timer1 or Timer2, press and hold the timer knob to cancel it. If both Timer1 and Timer2 are set, short press the time1/2 button twice, then press and hold the timer knob to cancel the time2 setting.

Radio operation

Before listening to the radio, fully extend the tail antenna for better reception. Rotate the volume knob to adjust the output level for listening. If there is noise when tuning to a station, you can try switching between mono and stereo modes (long press the mono/stereo button) for clearer sound.

Scan and all-in-one scan: press and hold the search +/- button for 2 seconds to automatically scan for available stations in the upward or downward frequency direction; the unit will stop and broadcast the available station. Press and hold the AMS button for 2 seconds to automatically scan and save available stations (supports up to 20 stations). Short press the preset +/- button to switch between preset stations. The unit also automatically scans and saves available stations when you connect power for the first time.

Station manual memory: when you tune to a favorite station by scanning, short press the memory button first, then press preset +/- to select the desired preset station number, and short press the memory button again to confirm. The current station will then be saved.

Bluetooth operation

This product includes Bluetooth functionality, which allows wireless playback of music from other Bluetooth devices (such as smartphones, tablets, etc.).

a. Short press the power/function knob to power on the unit. Press and hold the power/function knob for 2 seconds to switch to Bluetooth mode. Rotate the volume knob to adjust the output volume level.

b. Enable the Bluetooth function on your device and search for available devices (refer to your device's manual for operation). Then check the available Bluetooth devices on the list. Select "BP KR14BT" for pairing. A short notice sound will come from the speaker after successful pairing.

c. Select and play music from your Bluetooth device. Adjust the volume level on both your device and the radio side. The sound will then play wirelessly through the speaker.

d. Short press the preset +/- button to select the previous or next track. Short press the play/pause knob to play or pause music playback. Press and hold the play/pause knob for 2 seconds to disconnect the Bluetooth connection with the current device and search for another device to pair.

Bluetooth

The Bluetooth* wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by us is under license. Other trademarks and trade names are those of their respective owners.

Display brightness adjustment: press and hold the dimmer button for 2 seconds to adjust the display brightness between high and low. When the display is at low level, pressing any button will light it up for 10 seconds and then turn off automatically.

Auto dim: if you select DT ON during clock time setting (a DT icon shows on display), the display will auto dim between 23:00~5:00.

LED light: short press the light on/off button to turn on or off the LED light, and the light will light up for 120 minutes and turn off automatically in case you forget to turn it off.

Specification

Power source: 230V~50/60Hz

Backup battery power: 2 x AA size batteries (not included)

FM radio frequency: 87.5~108.00MHz

Bluetooth version: 5.0

Bluetooth Profiles: A2DP, AVRCP

Bluetooth Frequency range: 2.402GHz-2.480GHz

The maximum RF Power: < 5dBm

RMS output power: 2 × 0.8W

Standby power consumption: <0.5W

Power consumption: 8 W

Unit dimension: 260 x 156 x 52mm (L/D/H)

(The above spec may update without prior notice.)

Important information