TC-KE500S - Cassette player SONY - Free user manual and instructions
Find the device manual for free TC-KE500S SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cassette deck |
| Brand | Sony |
| Model | TC-KE500S |
| Dimensions (W x H x D) | Approx. 430 x 135 x 285 mm |
| Weight | Approx. 4.5 kg |
| Power supply | AC 220-240V, 50/60 Hz |
| Power consumption | 20 W |
| Playback modes | Auto reverse, continuous play |
| Recording | Stereo, with Dolby NR |
| Noise reduction | Dolby B |
| Heads | 2 (play/record combined, erase) |
| Motor | Direct drive |
| Frequency response | 30-18,000 Hz (metal tape) |
| Signal-to-noise ratio | >70 dB (Dolby B) |
| Output connections | Line out (RCA), headphone jack |
| Input connections | Line in (RCA), microphone (mini) |
| Cleaning | Use a cotton swab with isopropyl alcohol to clean the heads, pinch roller, and capstan periodically. |
| Safety | Do not expose to moisture or extreme temperatures; unplug when not in use. |
| Spare parts and repairability | Belts, pinch rollers, and heads are replaceable. Consult a qualified technician. |
| General information | Designed for high-quality cassette playback and recording. Refer to manual for detailed operation. |
Frequently Asked Questions - TC-KE500S SONY
How to clean the tape heads on Sony TC-KE500S?
Use a cotton swab lightly moistened with isopropyl alcohol. Gently rub the playback/record head, erase head, pinch roller, and capstan. Do not use abrasive materials. Allow to dry completely before use.
Why does my cassette deck not power on?
Check the power cord connection and ensure the outlet is working. Inspect the fuse (if accessible) and replace if blown. If the issue persists, consult a qualified technician.
What type of cassette tape is recommended?
The TC-KE500S supports Type I (Normal), Type II (High Bias, Chrome), and Type IV (Metal) tapes. For best performance, use Type II or IV with Dolby B enabled.
How to enable Dolby noise reduction?
Press the Dolby NR button on the front panel. When playing back a tape recorded with Dolby, set it to the same setting. The indicator light will confirm activation.
What should I do if the tape speed is inconsistent?
Clean the capstan and pinch roller first. If the issue continues, the drive belt may be worn or stretched. Replace the belt or consult a service technician.
Can I connect the deck to a computer?
The TC-KE500S has analog RCA outputs. You can connect it to a computer's audio input via a RCA-to-3.5mm cable. Use audio recording software to digitize tapes.
How to perform auto reverse playback?
Insert the tape and press PLAY. The deck automatically reverses at the end of the side. For continuous playback, ensure the auto reverse function is not disabled.
Why is the sound distorted during playback?
Dirty heads are a common cause. Clean them as described above. Also check the tape condition; old or damaged tapes may cause distortion. Adjust the output level if too high.
How to replace the drive belt?
Unplug the deck, remove the outer casing, and locate the belt. Note the belt routing, then gently remove the old belt and install a new one of the same size. Reassemble and test. Seek professional help if unsure.
What is the purpose of the microphone input?
The microphone input allows you to record directly from a microphone. It is a mono mini-jack. For stereo recording, use the line inputs.
User questions about TC-KE500S SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cassette player in PDF format for free! Find your manual TC-KE500S - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC-KE500S by SONY.