TC-WE805S - Cassette player SONY - Free user manual and instructions
Find the device manual for free TC-WE805S SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual Cassette Deck |
| Model | TC-WE805S |
| Brand | Sony |
| Dimensions (W x H x D) | 430 x 135 x 300 mm |
| Weight | 5.0 kg |
| Power Supply | AC 120V/240V, 50/60 Hz |
| Power Consumption | 30 W |
| Number of Tape Decks | 2 (Deck A & Deck B) |
| Auto Reverse | Yes, on both decks |
| Dolby Noise Reduction | Dolby B & C |
| High Speed Dubbing | Yes (2x speed) |
| Continuous Play | Yes |
| Frequency Response | 30 Hz - 18 kHz (metal tape) |
| Signal-to-Noise Ratio | 70 dB (with Dolby C) |
| Wow and Flutter | 0.05% WRMS |
| Inputs | Line In (RCA), Mic (optional) |
| Outputs | Line Out (RCA), Headphone (6.3mm) |
| Maintenance | Clean heads and capstans with alcohol swab after every 10 hours of use |
| Safety Precautions | Do not expose to moisture; disconnect when not in use; use grounded outlet |
| Repairability | Replaceable belts, pinch rollers, and heads; service manual available |
Frequently Asked Questions - TC-WE805S SONY
How do I clean the tape heads on my Sony TC-WE805S?
Open the cassette door, press Play to expose the heads, and gently wipe the heads, capstan, and pinch roller with a cotton swab moistened with isopropyl alcohol. Let dry before using.
What type of tapes are compatible with the TC-WE805S?
The TC-WE805S plays and records on standard Type I (Normal), Type II (High Bias/Chrome), and Type IV (Metal) cassettes. Auto tape type selection is supported.
How do I use the high speed dubbing feature?
Insert the source tape in Deck A and a blank tape in Deck B. Press High Speed Dubbing (HIGH DUB) and then Play on Deck A and Record on Deck B simultaneously. Copying is at twice normal speed.
Why does my tape sound muffled or distorted?
Muffled sound often indicates dirty heads. Clean the heads as described. Distortion may be due to overly loud recording level or worn tape. Adjust the recording level with the REC LEVEL knob.
Can I connect external speakers directly to the TC-WE805S?
No, the TC-WE805S has line-level outputs (RCA) and a headphone jack. Connect to an amplifier or receiver with speakers, or use headphones.
The tape is not moving or the deck won't play. What's wrong?
Check that the power cord is plugged in and the mains switch is on. If the tape is stuck, the drive belt may be broken or slipping. Replace belts if necessary. Also ensure the pause is not pressed.
How do I set the timer recording?
This model does not have a built-in timer. Use an external timer plugged between the AC outlet and the deck. Set the timer to turn on the deck at the desired time, and press Record and Pause together beforehand.
What is the purpose of the Dolby NR switch?
Dolby NR reduces high-frequency tape hiss during playback. Use Dolby B for most tapes, and Dolby C for more noise reduction. Always use the same Dolby mode that was used when recording.
How can I adjust the azimuth alignment?
Azimuth alignment ensures proper head-to-tape contact. Use a phase test tape and adjust the screw on the head block while monitoring the output. For most users, factory alignment is sufficient; adjust only if you have experience.
Where can I find a service manual or replacement parts?
Search for Sony TC-WE805S service manual online. Replacement belts, pinch rollers, and heads are available from electronics parts suppliers or repair shops. Use Sony part numbers for best compatibility.
User questions about TC-WE805S SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cassette player in PDF format for free! Find your manual TC-WE805S - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC-WE805S by SONY.