TC-WR590 - Cassette player SONY - Free user manual and instructions
Find the device manual for free TC-WR590 SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual Cassette Deck |
| Brand | Sony |
| Model | TC-WR590 |
| Dimensions (W x H x D) | 430 x 135 x 285 mm |
| Weight | 5.5 kg |
| Power Supply | 220-240 V AC, 50/60 Hz |
| Power Consumption | 15 W |
| Cassette Type | Compact cassette (Type I, II, IV) |
| Deck Mechanism | Dual auto-reverse, continuous play |
| Recording | Manual level control with peak meter, Dolby B/C noise reduction |
| Playback Features | Auto Music Scan, blank skip, pitch control |
| Frequency Response | 30 Hz – 18 kHz (Type II/IV) |
| Signal-to-Noise Ratio | > 70 dB (Dolby C) |
| Wow and Flutter | 0.08% WRMS |
| Inputs/Outputs | Line input (RCA), line output (RCA), headphone jack (3.5mm) |
| Headphone Output | 16 mW per channel at 32 ohms |
| Maintenance | Regular cleaning of heads, pinch rollers, and capstans with isopropyl alcohol |
| Safety | Avoid moisture; use only in dry environments; disconnect when not in use |
| Reparability | Replaceable belts, pinch rollers, and heads; service manual available |
| Spare Parts | BELT WR590, pinch roller assembly, magnetic heads |
Frequently Asked Questions - TC-WR590 SONY
How do I clean the tape heads?
Use a cotton swab moistened with isopropyl alcohol and gently wipe the play/record heads, pinch roller, and capstan. Let it dry before use.
Can I record on chromium dioxide (Type II) tapes?
Yes, the TC-WR590 supports Type II (CrO2) and Type IV (metal) tapes. Use the tape selector switch or auto-detect feature.
How do I set the recording level?
Use the REC LEVEL knobs for each channel while observing the peak meter. Adjust so peaks reach around 0 dB but rarely exceed. Enable Dolby NR to reduce noise.
What does 'Auto Music Scan' do?
It automatically advances to the next track by detecting silent gaps between songs (set to 4-8 seconds). Press the AMS button during playback.
How do I connect the deck to my amplifier?
Connect LINE OUT to an unused line input on your amplifier using RCA cables. For recording, connect your amplifier's tape output to LINE IN.
Why does the deck not play or move?
Check if the cassette is inserted correctly. If the deck does not respond, the drive belt may have slipped or broken. Replace it.
Can I use Type IV (metal) tapes?
Yes, the deck is compatible with Type IV. Ensure the tape selector is set correctly or it auto-detects (depending on cassette notches).
How do I adjust azimuth for best sound?
Azimuth adjustment is not user-accessible on the TC-WR590. If playback is distorted, the heads may need professional alignment or replacement.
What is Dolby B and C?
Dolby B reduces tape hiss by about 10 dB, and Dolby C by about 20 dB. Select the same mode used during recording for playback.
How do I replace the drive belt?
Remove the top cover, locate the belt connecting the motor and flywheel. Note routing, then remove old belt, install new Sony BELT WR590, reassemble.
User questions about TC-WR590 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cassette player in PDF format for free! Find your manual TC-WR590 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC-WR590 by SONY.