VAPORETTO ECO CARE - Steam cleaner POLTI - Free user manual and instructions

USER MANUAL VAPORETTO ECO CARE POLTI

Read these instructions carefully before using the appliance.

Dear Customer,

Congratulations and thank you for purchasing this POLTI product, contributing to the conservation of our most precious natural resource: the Environment. VAPORETTO solves all cleaning and hygiene problems without the use of detergents - all that's needed is just normal tap water which our system transforms into steam at a constant powerful pressure, allowing you to clean more thoroughly and in an ecological way.

Our Technical Development team have added a range of sophisticated improvements to make cleaning tasks both safer and more effective:

• The new handle is smaller, lighter, easier to handle and more comfortable to use because you can start producing steam with just one finger, by lightly pressing a button.

Safety is guaranteed by the strict tests all Polti products and accessories are subjected to. The STEAM COMFORT handle has passed the strict Splash Proof Test certifying its resistance to splashes of water.

• The patented Safety Cap - a unique Polti patent, prevents opening whilst any residual pressure remains in the system.
• Steam pressure is controlled by a pressure switch and the steam flow can be regulated while operating.

Polti's products are submitted to very strict testing. Vaporetto passed also the Splash Proof Test, since it has been designed to be splash proof.

VAPORETTO is built according to the IEC regulations, and is equipped with a safety valve, a safety thermostat and an additional protective thermostat which prevents operation of the machine when it is empty and which maintains VAPORETTO in an absolutely safe condition at all times. The accessories and all the components are manufactured with highest quality materials which are resistant to the high temperatures attained during the operation of this machine.

GENERATOR

A) Patented Safety Cap
B) Generator on/off switch
C) Accessories on/off switch
D) Central connector block with splashproof cover
E) Lock-in aperture for central connector
F) Power supply cable
G) Carrying handle
H) Pivoting wheels

I) Steam regulation control

ACCESSORIES

1) Flexible hose
2) Steam gun

2A) Safety switch

3) Steam request lever
4) Connector assembly
5) Press down connector button
6) Locking tab
7) Extension tubes
8) Large brush
9) Cloth retaining clips
10) Replaceable bristles plate
11) Accessories locking button
12) Small brush
13) Cotton cloths
14) Filler funnel

15) Spare washers for accessory connections
16) 120^ nozzle
17) Small round brush for 120^ nozzle
18) Window squeezegee tool
19) Small blade for window tool
20) Large blade for window tool

ACCESSORIES SOLD SEPARATELY

21) High pressure lance
22) Triangular brush
23) Wallpaper stripper tool
Q) Professional Iron
R) Steam request button
S) Temperature regulation dial
T) Iron res mat
U) Continuous steam jet button
V) "Iron heating" indicator light

TECHNICAL DATA

Voltage: 120 V~

Frequency: 60 Hz

Max power: 1500 W

CE This unit conforms with EC-directives 2004/108/CE (EMC) and 2006/95/CE (low voltage).

Polti S.p.A. reserves the right to change equipment or accessory specification without prior notice.

IMPORTANT SAFEGUARDS

GROUNDING INSTRUCTION

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person it you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug illustrated in sketch A in figure A. A temporarily adaptor that looks like the adaptor illustrated in sketches B and C may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available.

The temporary adaptor should be used only until a properly grounded outlet (scketch A) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by metal screw.

Note: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.

• WARNING - To reduce the risk off fire, electric shock, or injury:
• Not for Space heating Purposes
• To provide continued protection against risk of fire of electric shock, connect to properly grounded outlet
• For Household Use Only
  To Reduce The Risk Of Electric Shock - Use Indoor Only
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce hair flow.
• Use extra care when cleaning on stairs
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.

SAVE THESE INSTRUCTIONS

• Connect to a properly grounded outlet only. See Grounding instructions"
• To Reduce the Risk of Fire, do not use a flammable or combustible liquid to clean a floor

PRECAUTIONS

KEEP THESE INSTRUCTIONS

• Read these instructions for use carefully before using the appliance, and make sure that anyone using the machine is familiar with these instructions and the warnings.
  DO NOT USE THE STEAM FUNCTION ON DRAYLON, VELVET, LEATHER OR OTHER SENSITIVE FABRICS.
• Any use which does not comply with these instructions will invalidate the warranty.
• The wiring system to which the appliance is connected must always comply with the laws in force.
• Before connecting the appliance, make sure that the mains voltage is the same as the voltage indicated on the data label of the appliance and that the power outlet is connected to earth
• Always turn off the appliance at the on/off switch before unplugging it.
• If the appliance is left unused, always disconnect it from the mains. Never leave the appliance unattended with the cable plugged into the mains.
• Always make sure the appliance is unplugged before performing maintenance work of any kind
• Do not pull the power cable out of the socket, but grasp the plug itself to avoid damage to the socket.
• Do not allow the power cable to be twisted, crushed, stretched, or come into contact with sharp or hot surfaces.
• Do not use the appliance if the power cable or other important parts are damaged.
• Do not use electric extension leads that are not authorized by the manufacturer, as they may cause damage or fire.
• If it is necessary to replace the power supply cable, please refer to the nearest Polti authorised service centre, since the use of a special tool is necessary.
• Never touch the appliance with wet hands or feet with the cable plugged into the mains.
• Do not use the appliance when barefoot.
• Do not use the appliance near a bathtub, shower or container full of water
• Never immerse the appliance, the cable or the plugs in water or another liquid.
• Use of the appliance in places where there is a danger of explosions is prohibited.
• Do not use the product with toxic substances.
• Do not lay the hot appliance on surfaces sensitive to heat.
• Do not leave the appliance exposed to wind or

rain.

• Do not place the appliance near a live element, an electric stove or any other source of heat.
• Do not expose the appliance to extreme temperatures
• Never let children or people who are not familiar with how the appliance works use it.
• Do not press the buttons hard or with a pointed object such as a pen.
  Always rest the appliance on a stable surface.
• In case of accidental fall of the appliance it is necessary to have it checked by an authorized Service Centre as the internal safety features may have been affected.
• In case of breakdown or malfunction switch off the appliance and never attempt to disassemble it, but refer to an authorized Service Centre.
• To avoid prejudicing the safety of the appliance, use only original spare parts and accessories approved by the manufacturer.
• Do not wind the power cable around the appliance, especially when the appliance is still hot.
• During refilling with water, switch off and disconnect the appliance from the mains.
• It is necessary to keep the unit in horizontal position during operation.
• Do not direct the steam jet onto electrical and/or electronic appliances.
• Let the appliance cool down before cleaning it.
• Before storing the appliance make sure that it has completely cooled down.
• This appliance is equipped with safety devices which are to be replaced only by a suitably qualified technician.
• Do not direct the steam jet at people, animals or debris.
• Never place your hands inside the jet of steam.

ATTENTION: Danger of burns!

• When refilling the boiler, keep your face away. Otherwise the still hot boiler walls can spit drops of very hot water or steam spray.
• Do not put any detergent or chemical substance in the boiler. Water by its nature contains magnesium, mineral salts and other deposits which in hard water areas can contribute to limescale build up in the boiler. To avoid these problems, it is necessary to swill out with tapwater and empty the boiler after every 3 or 4 uses. In very hard water areas we recommend the use of our KAL-STOP, a special natural-base decalcifier which inhibits and breaks down limescale, making it easy to remove just by swilling out the tank with a

little tapwater. This is a preventive against scale build-up and protects the metal walls of the steam generator tank. KALSTOP is available from Polti dealers or by mail-order from your Polti Service Centre.

• We recommend you use original Polti products only, as products of other brands may not be suitable for use in Polti products and could cause damage.
• Never use distilled water or scented water.
• Make sure the patented safety cap is fully and correctly screwed on, otherwise you may experience steam escaping from around the cap.
• Check periodically the patented safety cap and MAKE SURE the rubber gasket is in place around the base of the screw thread.

Replace with original spare parts if necessary. DO NOT USE the appliance if the rubber gasket is not in position.

• Do not refill the tank while it is still hot, allow it to cool down for a few minutes before refilling.
• Do not empty the appliance when the water in the boiler is still hot.
• Do not try to unscrew the patented safety cap when the appliance is in use.
• If you iron sitting down, do not put your legs under the ironing board, the steam can cause burns.
• Iron only on heat resistant surfaces and on surfaces that allow the steam to escape, e.g. mesh ironing boards.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, make sure that the surface on which the stand is placed is stable.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  Children should be supervised to ensure that they do not play with the appliance.
• The appliance must not be used if it has fallen, been dropped or when it has visible signs of damage or leaks.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

CORRECT USE OF THE PRODUCT

This appliance is intended for home use as a steam cleaner as described and in accordance with the instructions provided in this manual. Please read these instructions carefully and keep them, as you may find them useful in future.

Polti declines liability for any damage or accident derived from any use of this appliance which is not in conformity with the instructions contained in this booklet.

ATTENTION

Directive 2002/96/EC (Waste Electrical and Electronic Equipment - WEEE): information for users This product complies with EU Directive 2002/96/EC.

The crossed-out wastebasket symbol on the appliance means that at the end of its useful lifespan, the product must be disposed of separately from ordinary household wastes.

The user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan.

Appropriate separate collection to permit recycling, treatment and environmentally compatible disposal helps prevent negative impact on the environment and human health and promotes recycling of the materials making up the product. For more information on available collection facilities, contact your local waste collection service or the shop where you bought this appliance.

IMPORTANT

Before leaving our factory all our products are rigorously tested. For this reason, your VAPORETTO may contain some residual water in the boiler from the testing.

SETUP

Before using VAPORETTO for the first time assemble the pivoting wheels as indicated in the Fig. A.

PREPARATION FOR USE

1. Unscrew the patented safety cap (A) and fill the boiler with about 44 fl oz (1,3 L) of water using the filler funnel (14) making sure that it does not overflow (fig. 1). Normal tapwater can be used. However, as hard water by its nature contains limestone, which may cause a build-up of limestone in the tank, in hard water areas we recommend the use of our natural-base decalci

fier KALSTOP, available from your dealer or by mail order from your Polti service Centre.

1. Carefully screw on the patented safety cap to hand tight (Fig. 2). Make sure the patented safety cap (A) is fully and correctly screwed on, otherwise you may experience steam escaping from around the cap.
2. Connect the power supply cable (F) into an earthed power supply of the correct voltage.

WARNING: Do NOT under any circumstances put or leave the filler funnel in the water filling aperture of the appliance when the appliance is connected to the mains electricity supply. Danger of burns! Always make sure generator on/off switch (B) is switched OFF before connecting the appliance to the mains.

INSTRUCTIONS FOR USE

1a. Press down the generator on/off switch (B) and the accessories on/off switch (C) which will light up.
2a. Open the cover of the central connector block (D) and insert the central connector (4) pressing the connector button (5) and taking care that the locking tab (6) is correctly positioned in the lock-in aperture (E) on the block (Fig. 3).
3a. When the generator on/off switch (B) goes out, the steam cleaner is ready for use
4a. The steam gun (2) is equipped with a safety switch (2A) which prevents the accidental start of the steam jet by children or people who do not know how to operate the appliance.

With the switch (2A) in the "OFF" position, the lever controlling the steam jet is locked (Fig.4b). Should the hose be left unattended for a moment whilst the appliance is connected to the mains, it is recommended to put the safety switch in the "OFF" position. To start working, set the (2A) switch to the "ON" position and press the steam button (Fig.4a).

The first burst of steam may contain some water droplets, due to imperfect thermic stabilisation inside the flexible hose. We would therefore advise that the first jet of steam is played onto an old cloth until a constant pressure of steam is obtained.

Note: The generator on/off switch (B) may go on and off from time to time during use of VAPO- RETTO. This means the machine is maintaining the correct and constant pressure and is quite normal.

STEAM REGULATION FEATURE

VAPORETTOs are equipped with a steam regulation control (I) (Fig. 5). You can increase the steam

flow by turning the control in clockwise direction. Turning it in an anti- clockwise direction reduces the steam flow. Here are some suggestions for the choice of steam flow level:

• Strong steam: for encrusted dirt, stains, grease and for sanitising.
• Normal steam: for carpets, rugs, glass, tiles etc.
• Delicate steam: for vaporising plants and cleaning delicate surfaces.

Please read separate warning about use on draylon, velvet and other delicate fabrics, or on sensitive wood surfaces.

CONNECTION OF ACCESSORIES

All the accessories of VAPORETTO can be connected to the handle or to the extension tubes as per the following instructions (fig. 6):

1b. Move the locking button (11) on the accessory to the "open" position.
2b. Attach the required accessory to the hand gun or to the extension tube.
3b. Move the locking button (11) back to the position 'closed'.
4b. Check that the locking button has engaged and the accessory is fully connected.

PATented SAFETY CAP / "WATER OUT"

The appliance is equipped with a patented safety cap, which prevents opening of the generator tank as long as there is any pressure remaining inside. This is an important and indispensable safety device, and it is necessary to follow the procedure here below when re-filling the generator tank.

When you have used up all the water in the tank, proceed as follows:

1c. Switch off the machine at the generator on/off switch (B)
2c. Press the steam request lever (3) on the steam gun (2) or, if using the professional iron, the steam request button (R) on the professional iron (Q) so as to fully exhaust the steam supply from the tank.
3c. Switch OFF the accessory on/off switch (C).
4c. Disconnect the power supply cable (F) from the mains.
5c. Unscrew anti-clockwise the patented safety cap (A)
6c. Wait for a few minutes to allow the generator tank to cool down.
7c. When cool proceed to carefully refill the tank as described in paragraph 1 of the section "Preparation for Use". If refilling the generator when not completely cooled, pour only very small

quantities of water at each pouring into the tank, so as to avoid spitting from the tank, and cover exposed skin and face whilst filling

USE OF THE PROFESSIONAL IRON (OPTIONAL)

Vaporetto can be quickly transformed into a highly effective ironing system to make ironing quick and easy. Simply connect the product to the iron accessory for Vaporetto.

You may purchase the iron accessory at any Polti service centre or from top home appliance retailers.

1d. Connect the connector assembly at the end of the iron hose (4) to the generator as shown in point 2a of the section "Instructions for Use".

Check the manufacturer's label on the garment, and interpret the symbol on the label as follows:

Steam ironing allowed For dry ironing, set thermostat on ...

Steam ironing allowed For dry ironing, set thermostat on ...

Check the fabric's resistance to steam ironing or dry iron with thermostat set on ·

- do not iron - steam ironing or treatment not al- lowed

STEAM IRONING

2d. For STEAM ironing, turn the dial (S) and set the iron temperature to its maximum travel on the "COTTON-LINEN" steam position.

Most types of fabric, other than delicates can be STEAM ironed at this temperature, please consult the garment manufacturer's instructions on the label.

NB FABRIC INDICATIONS ON DIAL ARE FOR DRY IRONING, NOT STEAM IRONING.

3d. Wait for a few minutes until the "Iron heating" indicator light (V) goes out, to show that the soleplate of the iron has reached the required temperature.

4d. Press the steam request button (R) to enable the steam to come out. The steam flow will stop when the button is released. After each filling, when you first start to use the iron, a few drops of water mixed with the steam may be emitted (due to imperfect heat stabilisation). It is therefore advisable to direct the first jet of steam onto a rag.

5d. The iron can also be used in a vertical position e.g. for removing creases from curtain, clothing etc.
6d. To obtain a continuous jet of steam move the sliding button (U). The steam will continue to come out even when the steam request button (R) is released. To stop the steam flow move the sliding button backwards (U).

NOTE: using the iron, it is advisable to adjust the steam jet at medium output, or to do some testing in order to find the position on (U) which is most suitable to the fabric to be ironed.

DRY IRONING

7d. If you need to DRY iron (ONLY) (NOT steam ironing), press the accessory on/off switch (C) and adjust the temperature of the iron by turning dial (S) to the temperature required for the fabric (as shown on the dial).

ATTENTION: when dry ironing, be careful not to press the steam request button (R), as hot water could come out of the iron onto your garment and board.

IMPORTANT

• Do not leave the iron unattended whilst connected to the mains.
• Iron only on heat resistant surfaces and on surfaces that allow the steam to escape e.g. MESH ironing boards.
• ATTENTION: if you iron sitting down, do not place your legs under the ironing board, the steam can cause burns.

TIPS FOR BETTER UNIT PERFORMANCE

WARNING

• For cleaning leather, wood or delicate fabrics especially dralon, velvet and other pile surfaces, consult the manufacturers instructions. Clean only by using the hand gun at a safe distance together with a soft cloth and always do a test on a non visible part of the item first or on a sample. Allow the test area to dry completely before observing results and effects on surface or colour before proceeding to clean further areas.

• For cleaning wood surfaces (furniture, doors etc.) take great care as a too long application of the steam could alter the waxed appearance, the shine or the colour of the surfaces cleaned. We therefore recommend you to apply the steam on such surfaces only for brief periods or to clean these surfaces using a cloth first held in the steam.

• Please pay particular attention while cleaning brick floors: a too long application of steam could damage wax, brightness or colour of these surfaces.

• For delicate surfaces (e.g. synthetic materials, lacquered surfaces etc.) we recommend to always cover the small brush with at least two cloths to reduce the intensity of the steam, and (on machines with steam variation control) with the steam set at low level. Always test first on a non-visible area, allow to dry thoroughly, and if successful, be sure to use exactly the same tool, technique, steam level and steam jet distance.
• If cleaning glass surfaces in particularly low temperatures preheat the glass using the hand gun from about 20 In (50 cm) distance from the surface to be cleaned.
• For care of your plants vaporise at a minimum distance of 20 In (50 cm).

STEAM GUN (2)

The steam gun can be used directly on all spots requiring a stronger, closer treatment without connecting the brushes. The more resistant the stain, the closer you should hold the gun, the steam pressure and temperature being higher at the source. Always wipe with a dry cloth (or a slightly abrasive sponge if the spot is a difficult one to remove) after using the gun. Steam gun is particularly efficient at:

• breaking down rug and carpet stains before they are treated with the large brush;
• cleaning stainless steel surfaces, panes, mirrors, enamelled surfaces;
• cleaning hard-to-reach corners, such as stairs, window sills, door posts;
• cleaning cooking top knobs, taps bases
• cleaning window shutters, heaters, car interiors;
• spraying plants (from a distance);
• removing odours and creases from clothes.

To reach higher points, the steam gun can be connected to one or both extension tubes.

LARGE BRUSH (8)

To clean floors, put a clean, dry kitchen cloth under the brush and swing back and forth without applying any pressure. Use the other side of the cloth when the first one is impregnated with dirt. Use the brush directly without the cloth on particularly dirty or incrusted areas and in spaces between the tiles: swing the brush sideways to detach the dirt. Highly obstinate stains may require a steam gun treatment before the brush and cloth are used (an old bath towel is an ideal cloth). The same procedures apply to ceilings and vertical surfaces, like wallpaper. The cloth can easily be fastened around the brush

and held in place by the 4 clips (9) on the brush itself. Smooth cotton cloths are suitable for the treatment of glass surfaces: fasten the cloth around the brush then pass it over the window pane (or mirror) to remove the greasy film. Finally, spray the surface with the steam gun and wipe dry with a clean cloth. In cold weather, window panes will require pre-heating with the steam gun (from a distance of 20 In (50 cm)), prior to the actual cleaning with the brush. VAPORETTO is ideal for both syntetic and wool rugs as well as for all types of carpets. Its use ensures total hygiene, revives colours and restores the original brilliance of the pile. Drying occurs practically at once. Fold a cotton cloth over 2 or 3 times (according to the length and resistance of the pile) and fasten it onto the brush. Move the brush rapidly in all directions without applying any pressure. You should avoid lingering in the same place, as this may soak the area. Particularly dirty rugs may need several treatments. Obstinate stains may require the use of the steam gun (from a distance of 2-4 In (5-10 cm)) prior to treatment.

SMALL BRUSH (12)

The small brush is used whenever the big brush is too big or not practical to be used.

The small brush can be connected directly to the steam gun or to the extension tubes. The small brush can be used on:

• furnishing fabrics (after testing on a small hidden area)
• car linings (not pile surfaces), car windows (not in freezing temperatures)
• small window surfaces
• tile and other small surfaces

To clean wood (doorposts, floors etc) do not apply the steam directly but cover the brush (big or small) with a doubled cotton cloth. For furniture cleaning, direct the steam jet onto a dry cotton cloth, and then start the cleaning. The warm moisture on the cloth traps the dust, spots and the static electricity so that the furniture stays clean longer.

120^ STEAM NOZZLE (16)

The 120^ nozzle (which can be connected directly to the gun or together with the extension tubes) allows you to concentrate a powerful jet of steam to otherwise inaccessible locations, such as radiators, door posts, sills and shutters, as well as for sterilising toilet bowls. It's a very useful and indispensable tool.

WINDOW SQUEEGEE TOOL (18,19,20)

Warning: in particularly cold weather, pre-heat the windows by applying steam from a distance of about 20 In (50 cm) from the surface to be cleaned. The window squeegee tool allows you to clean effectively and rapidly all glass surfaces without using detergents. Your glass will remain cleaner longer thanks to the absence of the film normally left behind by chemical cleaning products on which new dust and grease can attach themselves.

Cleaning glass is done in two stages:

• Spray the steam onto the surface to be cleaned to loosen the dirt (not touching with the blade).
• Pull the blade straight down the window surface from top to bottom without applying the steam, to take away the dirt.
  FOR EXTRA ABRASIVE ACTION AND MORE EFFECTIVE REMOVAL OF DIRT, WE RECOMMEND USING THE BRISTLES SUPPLIED WITH THE LARGE WINDOW CLEANING KIT

To clean especially large glass surfaces, attach the window squeegee tool to the extension tubes.

CARE OF YOUR VAPORETTO

• Before attempting any maintenance operation, make sure to always disconnect the appliance from the mains
• Check periodically the condition of the coloured washer connections on the central connector (4). If necessary, replace the washers with the spare washers supplied (15).

Make the same check also on the connection washers of the extension tubes (7) and of the steam gun (2).

• To clean the body of the appliance, simply use a moist cloth.

OPTIONAL ACCESSORIES

Vaporetto can be quickly transformed into a highly effective ironing system to make ironing quick and easy. Simply connect the product to the iron accessory for Vaporetto. You may purchase the iron accessory at any Polti service centre or from top home appliance retailers.

HIGH PRESSURE LANCE (21)

This accessory allows you to reach the most inaccessible places. Ideal for cleaning large radiators or shutters etc.

TRIANGULAR BRUSH (22)

A new accessory whose shape allows access into the most difficult corners.

WALLPAPER STRIPPER TOOL (23)

Specially designed for easy removal of wallpaper without significant wetting.

WARRANTY

If the appliance requires repair, it must be returned with this coupon and a receipt valid for tax purposes attesting to the purchase.

Polti products are guaranteed to the purchaser for 1 year from the date of purchase as shown on a valid receipt issued by the seller. During the warranty period, Polti will repair products with defects present at time of manufacture in workmanship or materials at no charge to the customer for either labour or materials. To have work performed under warranty, customer must send the appliance back to the Polti Service Centre in the country where purchased, and present a valid receipt issued at the time of purchase as evidence of the date of purchase. Warranty does not cover defects due to incorrect use or use other than that described in the instruction booklet and other enclosed literature, which is an integral part of the contract of sale for the product. Warranty does not cover defects resulting from chance (fire, short circuit) or attributable to a third party (tampering with the product). Warranty does not cover parts that are damaged by wear or subject to normal wear (consumables such as filters, brushes, etc.). Warranty does not cover any damage caused by limescale. Polti will accept no responsibility for any injury to people or animals or damage to objects directly or indirectly resulting from failure to follow the instructions provided in the instruction booklet or other enclosed warning literature, in particular the warnings and product maintenance instructions.

USO CORRECTO DEL PRODUCTO

ACCESORIO 120^ (16)