SLU0036 - Headphones Quer - Free user manual and instructions
Find the device manual for free SLU0036 Quer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Over-Ear Headphones |
| Brand | Quer |
| Model | SLU0036 |
| Dimensions (approx.) | 7.5 x 6.5 x 3.5 inches (190 x 165 x 90 mm) |
| Weight | Approx. 0.55 lbs (250 g) |
| Battery Capacity | Rechargeable Li-ion, 400 mAh |
| Charging Time | Approx. 2 hours |
| Playback Time | Up to 20 hours (varies by volume) |
| Connectivity | Bluetooth 5.0, 3.5mm AUX |
| Driver Size | 40 mm |
| Frequency Response | 20 Hz – 20 kHz |
| Impedance | 32 Ω |
| Control | On-ear buttons for volume, playback, calls |
| Microphone | Built-in, for hands-free calls |
| Accessories Included | USB charging cable, AUX cable, user manual |
| Care and Cleaning | Wipe with a soft, dry cloth. Do not use liquids. |
| Safety | Do not disassemble. Keep away from water and heat. |
| Spare Parts & Repairability | Cushions and cable replaceable. Contact support for parts. |
| General Information | Designed for music, calls, and daily use. |
Frequently Asked Questions - SLU0036 Quer
How do I pair the Quer SLU0036 headphones with my phone?
Turn on the headphones by holding the power button until the LED blinks. Enable Bluetooth on your phone and select 'Quer SLU0036' from the list. If prompted, enter 0000 or confirm pairing.
How do I charge the headphones?
Connect the included USB cable to the charging port on the headphones and a USB power source. A red LED indicates charging; it turns off when fully charged. Avoid overcharging.
What is the battery life?
The Quer SLU0036 offers up to 20 hours of playback time on a full charge, depending on volume and usage.
Can I use the headphones while charging?
Yes, you can use the headphones in wired mode via the AUX cable while charging. Bluetooth playback may be limited during charging.
How do I clean the headphones?
Wipe the exterior with a soft, dry cloth. For ear cushions, gently spot clean with a slightly damp cloth and air dry thoroughly. Do not submerge in water.
My headphones are not connecting via Bluetooth. What should I do?
Ensure the headphones are in pairing mode (LED blinking). Turn off Bluetooth on your phone, then turn it on again and search for devices. If needed, reset headphones by holding the power button for 10 seconds.
Are replacement ear cushions available?
Yes, replacement ear cushions can be purchased from authorized sellers or through Quer support. They are user-replaceable.
Can I use the headphones with a TV or computer?
Yes, via Bluetooth or the included 3.5mm AUX cable. For best audio quality, use the AUX connection when latency matters.
What do the LED lights mean?
Solid red: charging. Red off: fully charged. Flashing blue: pairing mode. Slow blue flash: connected and in use. Low battery: red flash.
The sound is distorted or low. How can I improve it?
Check the volume level on both the headphones and connected device. Ensure a stable Bluetooth connection (within 33 ft / 10 m). Reset the headphones if issues persist.
User questions about SLU0036 Quer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual SLU0036 - Quer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SLU0036 by Quer.