MW-1105 ST - Juicer Maxwell - Free user manual and instructions
Find the device manual for free MW-1105 ST Maxwell in PDF.
| Product Type | Juicer |
| Brand | Maxwell |
| Model | MW-1105 ST |
| Power Supply | 220-240 V~ 50/60Hz |
| Max Power Consumption | 600 W |
| Continuous Operation Time | Max 2 minutes, then at least 3 minutes break |
| Speed Settings | Low (I) for soft fruits/vegetables, High (II) for hard fruits/vegetables |
| Safety Features | Locking arm, lid interlock; operation only with lid fixed |
| Main Materials | Plastic housing, stainless steel grating filter (sharp) |
| Removable Parts | Pusher, lid, grating filter, juice collector, pulp container, juice cup |
| Cleaning | Hand wash removable parts with mild detergent; motor unit wipe with damp cloth; not dishwasher safe |
| Included Accessories | Motor unit, pusher, lid, grating filter, juice collector, pulp container, juice cup |
| Not Suitable For | Bananas, papaya, avocado, figs, apricots, mango, currants; extra hard/fibrous: coconut, rhubarb, quince |
| Operating Life | 3 years |
| Warranty | Provided by dealer; bill of sale required for claims |
| Intended Use | Household use only |
Frequently Asked Questions - MW-1105 ST Maxwell
User questions about MW-1105 ST Maxwell
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Juicer in PDF format for free! Find your manual MW-1105 ST - Maxwell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MW-1105 ST by Maxwell.
USER MANUAL MW-1105 ST Maxwell

рис. 1
СОКОВЫЖИМАЛКА
Описание
- Pusher
- Feeding chute
- Lid
- Grating filter
- Juice collector
- Juice draining spout
- Locking arm
- Motor unit
- Operation mode switch (I-0-II)
- Pulp container
- Juice cup
SAFETY MEASURES
Read this instruction manual carefully before using juice extractor and keep it for the whole operation period. Use the unit for the intended purposes only as specified in this manual.
Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.
During the operation and when the unit is plugged in, do not remove the juice extractor lid; follow this rule to avoid injuries.
- The maximal allowable continuous operation time is not more than 2 minutes with at least 3 minute break.
- Before using the unit for the first time, make sure that voltage in your mains corresponds to the operating voltage of the unit.
- Place juice extractor on a dry, flat and steady surface only.
- Before using the unit for the first time wash all removable parts that will contact processed foods thoroughly.
- Be cautious when holding grating filter in your hands, as disc grating surface is very sharp.
- Check the grating filter before every unit usage. If you find any mechanical damage, stop using the unit and immediately replace the grating filter.
- Use only the removable parts supplied with the unit.
- Do not use the unit outdoors.
-
Do not place the unit and power cord near hot surfaces, heat sources or sharp edges of furniture
-
Before using the unit make sure that all parts are set properly.
- You can use juice extractor only if the lid is fixed with the locking arm.
- Never push products into the feeding chute with your fingers or other objects during operation. Use only the pusher for this purpose.
- Do not bring your face close to the open feeding chute while the unit is operating, fruit/vegetable pieces can fly out and cause harm to user.
- Never use the juice extractor without installed pulp container.
- The unit is not intended for chopping or mixing of products.
- Do not disassemble the juice extractor, if it is plugged in.
- Do not touch the power plug with wet hands.
- Open the locking arm only after the unit is switched off and the grating filter has stopped.
- If moisture or juice drops appeared on juice extractor housing, switch it off, unplug it and wipe the housing with dry cloth.
• After operation switch the unit off and pull the power plug out of the mains socket. - For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.
Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
- Keep the unit out of reach of children.
- Do not allow children to use the unit as a toy.
- This unit is not intended for usage by children or disabled persons unless they are given all the necessary and understandable instructions by a person who is responsible for their safety on safety measures and information about danger that can be caused by improper usage of the unit.
- Do not immerse the motor unit in water or any other liquids; do not wash it under water jet. Clean the motor unit with a slightly damp cloth, and then wipe it dry.
- Do not use the unit when the power cord, power plug or any other removable parts are damaged. Do not try to repair the unit by yourself, in case of damages apply to the authorized service center.
ENGLISH
The unit is intended for household use only, its commercial usage is prohibited.
BEFORE THE FIRST USE
After unit transportation or storage at low temperature it is necessary to keep it for at least two hours at room temperature before switching on.
– Unpack the juice extractor.
Disassemble and clean the juice extractor before usage:
- Remove the pusher (1) from feeding chute (2) on the juice extractor lid (3).
- Lower the locking arm (7) and release the lid (3).
- Remove the lid (3).
- It will be easier to remove the grating filter (4) if you remove it with the juice collector (5), holding the juice collector (5) and pulling it upwards.
- Wash thoroughly and dry all the removable parts that will contact food.
Note:
- Be cautious when holding grating filter (4) in your hands, as disc grating surface is very sharp.
MAKING JUICE
Before the first use make sure that the operating voltage of the unit corresponds to voltage of your mains.
Fruit and vegetables should be fresh.
Before juice extracting wash fruit/vegetables and cut them into pieces easily fitting into the feeding chute (2), having removed inedible parts from vegetables or fruit, such as stems, hard peel or stones, for example, cherry or peach.
- Place the motor unit (8) on a dry, flat and steady surface.
- Before assembling the juice extractor make sure that the operation modes switch is set to the position «0», and the plug is not inserted into the socket.
- Attach the juice collector (5) to the motor unit (8).
- Install the grating filter (4) inside the juice collector (5).
Attention!
Do not use juice extractor if you found mechanical damages of grating filter (4).
- Install the lid (3) on the juice collector (5) and fix it by placing the locking arm (7) in vertical position.
- Install pulp container (10) to its place.
- Set the cup (11) under the juice draining spout (6).
- Lower the juice draining spout (6) by pressing it (fig. 1).
- Insert the power plug into the socket.
- Switch the juice extractor on by setting the switch (9) to the position «I» (low speed) or to position «II» (high speed).
Note:
Low speed «I» is intended for extracting of juice from soft vegetables/fruits – such as tomatoes, ripe pears, strawberry, oranges, plums, grapes, pumpkin, onion, cucumbers and etc.
High speed «II» is intended for extracting of juice from hard vegetables/fruits – such as artichoke, carrots, apples, paprika, beet, potatoes, pineapples, vegetable marrows, celery, spinach, dill, leek etc.
Attention! To avoid the grating filter (4) stopping and motor rotor jamming during the processing of viscous or quite hard food it is recommended to use the high speed operation mode «II» of the juice extractor.
- The unit will be switched on only if all the removable parts are installed properly, and the lid (3) is fixed with the locking arm (7).
- Feed the food into the feeding chute (2) located on the lid (3) only when grating filter (4) is rotating.
- Put the preliminary cut vegetables or fruits gradually into the feeding chute (2) located on the lid (3) and push them slightly with the pusher (1). Do not press on the pusher (1) too hard as it can lead to decrease of juice amount and even to grating filter (4) rotation stopping. The slower is the fruit and vegetables processing, the higher is the juice extraction rate.
- Do not put your fingers or any other objects into the feeding chute (2) located on the lid (3).
- During the operation check the grating filter (4) periodically for obstruction of mesh with pulp, if necessary wash the grating filter (4); before removing the grating filter switch the juice extractor off and unplug it.
- Control the pulp container (10) filling, if the container is filled up, switch juice extractor off, unplug it and remove the pulp from the container (10).
Attention!
The maximal allowable continuous operation time is not more than 2 minutes with subsequent break of at least 3 minutes.
- After juice extractor operation, switch it off by setting the switch (9) to the position «0», and unplug it.
- To prevent juice dripping set the juice draining spout (6) in horizontal position (fig. 1), to do this slightly lift the juice cup (11).
CLEANING AND CARE
After the end of operation or before cleaning always switch the unit off and unplug it.
Disassemble and clean juice extractor after every usage.
- Remove the pusher (1) from the feeding chute (2) located on the lid (3).
- Lower the locking arm (7) and release the lid (3).
- Remove the lid (3).
- For easy removal of the grating filter (4) remove the grating filter with the juice collector (5) holding the juice collector (5) and pulling it upwards.
- It is recommended to wash all removable parts in warm water with neutral detergent right after unit operation.
- It is more convenient to wash grating filter (4) openings from the outside using a small brush.
- Be careful when washing grating filter (4): disc grating surface is very sharp.
- Do not wash the grating filter (4) and other removable parts in a dishwashing machine.
- Clean the motor unit (8) with a slightly damp cloth, and then wipe it dry. Do not immerse the motor unit (8) into water or any other liquids; do not wash it under water jet.
- Do not use coarse sponges, abrasives or solvents to clean the juice extractor.
- Some products, for example, carrots or beets, can dye juice extractor removable parts; you can use dry cloth soaked in vegetable oil for removing stains, after cleaning the parts wash them with warm water and a neutral detergent, then dry.
TIPS
- Use only fresh fruits and vegetables, as they contain more juice.
- For juice extracting you can use different vegetables (carrots, cucumbers, beets, celery stems, spinach, tomatoes) or fruits (apples, grapes, pineapples).
- It is recommended to wash berries right before juicing, as they lose freshness quickly.
- It is not necessary to remove the thin peel from fruits or vegetables, remove the thick peel only, for example from pineapples or beet.
- When making juice from apples it is not necessary to remove apple cores.
- When extracting apple juice remember that its richness depends on the apple sort.
- Choose the apple sort, from which you can make juice according to your taste.
- Drink juice right after you made it. The juice loses its taste and nutrition value during long air storage.
- Apple juice gets dark quickly, but adding a few drops of lemon juice slows down the process of juice darkening.
- If you keep juice in the refrigerator, pour it into a clean covered bowl to prevent it from absorbing smell of other foods stored in the refrigerator. It is not recommended to store juice in a metal container, as juice can acquire the corresponding flavor.
- Juice extractor is not intended for processing fruits with high content of starch or pectin, such as bananas, papaya, avocado, figs, apricots, mango, red and black currants. Use other kitchen appliances to process these kinds of fruit.
- Juice extractor is not intended for processing of extra hard of extra fibrous fruits or vegetables, such as coconuts, rhubarb or quince.
Storage
- Perform the requirements of the "CLEANING AND CARE" section before taking the unit away for storage.
- Keep the unit away from children in a dry cool place.
Delivery set
Motor unit - 1 pc.
Pusher - 1 pc.
ENGLISH
Lid - 1 pc.
Grating filter - 1 pc.
Juice collector - 1 pc.
Pulp container - 1 pc.
Juice cup - 1 pc.
Technical specifications
Power supply: 220-240 V \~ 50/60Hz
Maximal power consumption: 600 W
The manufacturer preserves the right to change the specifications of the unit without a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Law Voltage Regulation (73/23 EEC)
ENTSAFTER
Beschreibung
A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxx means that the item was manufactured in June (the sixth month) 2006.