VT-1473 ST - Blender Vitek - Free user manual and instructions

Product Type	Table Blender
Brand	Vitek
Model	VT-1473 ST
Category	Blender
Intended Use	Chopping, mixing, cocktails
Bowl Material	Glass
Bowl Capacity	1.5 L (estimated)
Number of Speeds	2 (low and high) + pulse
Speed Settings	1 (low), 2 (high), P (pulse)
Maximum Continuous Operation	2 minutes
Minimum Break Between Uses	3 minutes
Safety Features	Blender won't start if bowl/blade not installed correctly; sharp blade warning
Parts Included	Motor unit, glass bowl, lid, measuring cup, knife block, sealing gasket, bowl base
Cleaning Instructions	Remove knife block first; wash bowl; do not immerse motor unit
Non-Slip Feet	Yes
Power Supply	Mains (voltage not specified)

Frequently Asked Questions - VT-1473 ST Vitek

What can I blend with the Vitek VT-1473 ST?

This blender is intended for chopping products, mixing different ingredients, or making cocktails.

How do I use the pulse mode?

Set the operation mode switch to 'P' for pulse mode. The blender will run only while you hold the switch in this position.

What is the maximum operation time?

Do not operate the blender continuously for more than 2 minutes. Allow a break of at least 3 minutes between cycles.

Why won't my blender turn on?

Ensure the blender bowl and knife block are correctly installed. The blender will not start if components are not properly fixed.

Can I blend hot liquids?

It is not recommended to blend hot liquids as they may cause pressure buildup. Always allow liquids to cool before blending.

How do I clean the blender?

After use, unplug the unit. Remove the knife block by rinsing it in the bowl first, then detach. Wash the glass bowl and lid with warm soapy water. Do not immerse the motor unit.

Is the glass bowl dishwasher safe?

The manual does not specify dishwasher safety. Hand washing is recommended to preserve the glass and seals.

Can I crush ice with this blender?

The blender is designed for chopping and mixing. Crushing ice may be possible on high speed, but avoid overloading. Pulse mode can help.

What is the capacity of the blender bowl?

Do not fill above the maximal mark indicated on the bowl. Typical capacity is around 1.5 liters.

How do I install the blade assembly?

Place the sealing gasket on the knife block, then insert it into the bowl base. Turn the base clockwise to lock. Then attach the glass bowl to the motor unit.

USER MANUAL VT-1473 ST Vitek

TABLE IBENDER
Description	• Make some once again. See the tender blade tool.
1. Bander blade tool	• Set the required power to use the main socket.
2. Bander blade end	• Set the required power to use the main socket.
3. Bander blade end (with a minimum operating range)	• Use the upper limit of the main socket.
4. Blade blade tool	• Use the upper limit of the main socket.
5. Blade block	• Use the upper limit of the main socket.
6. Blade blade base	• Use the upper limit of the main socket.
7. Blade blade base	• Use the upper limit of the main socket.
8. Operator mode switch	• Use the upper limit of the main socket.
9. Operator mode switch	• Use the upper limit of the main socket.
SAVETY MEASURES
1. Bander blade tool, mechanical, carefully before using the tool and seek for the whole operation.	• Do not switch the other on, when the tender blade tool is used.
Use the tool as an optical tool, to interact with the interdental process and/or use the tool as an optical tool.	• Do not switch the other on, where the tender blade tool is used.
Use the tool as an optical tool, to interact with the interdental process and/or use the tool as an optical tool.	• Do not switch the other on, where the tender blade tool is used.
• Beening connecting the tool into the matrix, make the component of the tool into the matrix. Use the tool into the matrix to respond to its own range of utility.	• Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket.
• Beening connecting the tool when you are not using the tool. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket, which uses the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use it is also known as the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use a lower limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limits of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in the main socket. Use the upper limit in 1000 m. Use the upper limit in 1000 m. Use the upper limit in 1000 m. Use the upper limit in 1000 m. Use the upper limit in 1000 m. Use the upper limit in 1000 m. Use the upper limit in 1000 m. Use the upper limit in 1000 m. Use the upper limit in 1000 m. Use the lower limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the lower limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket, but not less than 100 m. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. • Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. - Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. - Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. Use the upper limit of the main socket. The cutting edge of the main socket is used to be a series of two sets of blocks, each containing one or more blocks. Use the upper limit of the main socket is used to be a series of two sets of blocks, each containing one or more blocks. Use the upper limit of the main socket is used to be a series of two sets of blocks, each containing one or more blocks. Use the upper limit of the main socket is used to be a series of two sets of blocks, each containing one or more blocks. Use the upper limit of the main socket is used to be a series of two sets of blocks, each containing two or more blocks. Use the upper limit of the main socket is used to be a series of two sets of blocks, each containing three or more blocks. Use the upper limit of the main socket is used to be a series of two sets of blocks, each containing three or more blocks. Use the upper limit of the main socket is used to be a series of two sets of blocks, each containing three or more blocks. Use the upper limit of the main socket is used to be a series of two sets of blocks, each containing three or more blocks. Use the upper limit of the main socket is used to be a series with a series of blocks, each containing three or more blocks. Use the upper limit of the main socket is used to be a series with a series of blocks, each containing three or more blocks. Use the upper limit of the main socket is used to be a series with a series of blocks, each containing three or more blocks. Use the upper limit of the main socket is used to be a series with a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper Limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more chains. Use the upper limit of the main socket has a series of blocks, each containing three or more chains. Use the upper limit of the main socket has a series of blocks, each containing three or more chains. Use the upper limit of the main socket has a series of blocks, each containing three or more chains. Use the upper limit of the main socket has a series of blocks, each containing three or more chains. Use the upper limit of the main socket has a series of blocks, every other than 100 m. • Use the upper limit of the main socket has a series of blocks, each containing one or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series, every other than 100 m. • Use the upper limit of the main socket has a series of blocks, each containing one or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit of the main socket has a series of blocks, each containing one or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each involving a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limits of the main socket have a series of blocks, each containing one or more blocks. Use the upper limit of the main socket have a series of blocks, each containing three or more blocks. Use the upper limit of the main socket have a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing one or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series, every other than 100 m. • Use the upper limiting of the main socket has a series of blocks, each containing one or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each involving a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limiting of the main socket has a series of blocks, each containing three or more blocks. Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit(1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the upper limit (in 1500 m.) Use the lower limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000 m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper Limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m). Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit(2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the lower limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000m.) Use the upper limit (in 1000n.) Use the upper limit (in 1000n.) Use the upper limit (in 1000n.) Use the upper limit (in 1000n.) Use the upper limit (in 1000n.) Use the upper limit (in 1000n.) Use the upper limit (in 1000n.) Use the upper limit (in 1000n.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 1500m.) Use the upper limit (in 1500m.) Use the upper limit (in 1500m.) Use the upper limit (in 1500m.) Use the upper limit (in 1500m.) Use the upper limit (in 1500m.) Use the upper limit (in 1500m.) Use the upper limit (in 1500m.) Use the upper limit(2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the higher limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500m.) Use the upper limit (in 2500k) Use the upper limit (in 2500k) Use the upper limit (in 2500k) Use the upper limit (in 2500k) Use the upper limit (in 2500k) Use the upper limit (in 2500k) Use the upper limit (in 2500k) Use the upper limit (in 2500k) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2000m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (out 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use 1500m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit(2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the lower limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150n.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 1500m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use 150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper Limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.). Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m). Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper Limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 150m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250n.) Use the upper limit (in 250n.) Use the upper limit (in 250n.) Use the upper limit (in 250n.) Use the upper limit (in 250n.) Use the upper limit (in 250n.) Use the upper limit (in 250n.) Use the upper limit (in 250n.) Use the upper limit (in 250n.) Use the lower limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in 250m.) Use the upper limit (in2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the higher limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150m.) Use the upper limit (in 2150p.m.) Use the upper limit (in 2150p.m.) Use the upper limit (in 2150p.m.) Use the upper limit (in 2150p.m.) Use the upper limit (in 2150p.m.) Use the upper limit (in 2150p.m.) Use the upper limit (in 2150p.m.) Use the upper limit (in 2150p.m.)