KVT-819DVD - Car DVD player KENWOOD - Free user manual and instructions

USER MANUAL KVT-819DVD KENWOOD

KVT-819DVD KVT-839DVD INSTRUCTION MANUAL Kenwood Corporation VIDEO/AUDIO" FF HD Radio: nc REA DIGITAL me to read through this instruction manual ity with installation and operation procedures performance from your new DVD-receiver. For your records serial number, elp you obtain the best ju call upon y KVT-819DVD/KVT-83DVD Serial num US Residence Only Register Online Register your Kenwood product at www.Kenwoodusa.com © B64-3713-00/00 (KV/RV)

Satellite Radio Control {North American sales area only) 51 Functions When Displaying the Easy Control Panel si Functions While Displaying the Control Screen 51 Channel Search 52 Channel Memory 53 Direct Channel Search 53

This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. 01_B64-3713-00_Englishindd 4 Y : Continues to the next line. < @:Ends here. Short Press < Press the button, denoted by di. Continue to the next page The instruction continues to the next page. €... Make sure to flip the page for the rest of the instruction.

KVT-819DVD/KVT-839DVD

Display The above operation example th the mark differs from the actual operation.

Remote controller operation Some functions can only be used from a remote controller. In this case, the operation using the remote controller is described, showing a @ÿ mark. The characters below indicate a remote controller mode switch setting. Change in the screen e..3 With each operation, the screen changes in the order shown here. Selecting a screen item Select and choose an item on the screen. Select the item by touching the button on the screen. Press 1 second or more Press the button, denoted by d'J65, for 1 second or more (2-3 secondk) Indicates to press and hold down the button until operation starts or the screen changes. The left example indicates to press the button for 1 second. Press it approximately for the seconds shown in the clock. 01_B64-3713-00 Englishindd 5 Other marks

Important precautions are described to prevent injuries etc. Special instructions, supplementary explanations, limitations, and reference pages are described.

General precautions and reference pages are shown on the item. The initial value of each setup is shown English @ 5

Ë 25 Safety precautions 7 AwWaRNING To prevent injury or fire, take the following precautions: + To prevent à short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. + Do not watch or fix your eyes on the unit display when you are driving for any extended period. + Mounting and wiring this product requires skills and experience. For safety sake, leave the mounting and wiring work to professionals ACAUTION To prevent damage to the machine, take the following precautions: + Make sure to ground the unit to a negative 12V DC power supply. + Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing + Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. + To prevent deterioration, do not touch the terminals ofthe unit or faceplate with your fingers. + Do not subject the faceplate to excessive shock, as it is a piece of precision equipment + When replacing a fuse, only use à new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. + Do not apply excessive force to the open faceplate or place objects on it. Doing so will cause damage or breakdown + Do not use your own screws. Use only the screws provided. you use the wrong screws, you could damage the unit

6 © KVT-819DVD/KVT-839DVD

01_B64-3713-00 Englishindd 6 Do Not Load 3-in. CDs in the CD slot If you try to load à 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N' Switch to the “N' position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected.

+ You can damage both your unit and the CD changer if you connect them incorrecthy. Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such à situation, remove the disc and wait for the condensation to evaporate. Ifthe unit still does not operate normally after a while, consult your Kenwood dealer.

+ IFyou experience problems during installation, consult your Kenwood dealer. + When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area + We recommend the use of <Security Code Setup> (page 83) to prevent theft. + The characters conforming to ISO 8859-1 character set can be displayed + The RDS or RBDS feature won't work where the service is not supported by any broadcasting station. + The illustrations ofthe display and the panel appearing in this manual are exemples used to explain more clearly how the controls are used Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable. How to reset your unit + IFthe unit ails to operate properly press the Reset button, The unit returns to factory settings when the Reset button is pressed + Remove the USB device before pressing the Reset button. Pressing the Reset button with the USB device installed can damage the data contained in. the USB device. For how to remove the USB device, refer to <Playing a USB device> (page 15). - Press the reset button ifthe disc auto changer fails to operate correctly. Normal operation should be restored!

Reset button Cleaning the Unit IFthe faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth IFthe faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth

+ Apphing spray cleaner directly to the unit may affect its mechanical parts. Wiping the aceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. 01_B64-3713-00_Englishindd 7 TV tuner that can be connected to this unit + KTC-V500N + KTC-V300N Navigation units that can be connected to this unit + KNA-G510 + KNA-DV4100 + KNA-DV3100 + KNA-DV2100 About iPod that can be connected to this unit You can control an iPod from this unit by connecting an iPod (commercial product) with Dock connector using an optional accessory iPod connection cable {KCA-P300V) The following iPods can be controlled from this unit Controllable iPod iPod nano Software version iPod nano software 1.2 iPod nano second generation | iPod nano software 1.1.1 iPod with video iPod software 1.2 You must update your iPod software if its version is less than the above. The iPod software version is displayed in the "Version" field by pressing the iPod MENU button and then selecting "Set' "Information" The latest iPod software updater can be downloaded from the Apple Computer web site. The character set supported by this unit is ISO08859-

Characters that cannot be displayed correctly appear See By connecting your iPod to this unit with an optional accessory iPod connection cable (KCA-iP300V), you can supply power to your iPod as well as charge it while playing music. However, the power of this unit must be on. English @ 7

Notes Handling CDs + Do not touch the recording surface of the CD) + Do not stick tape etc. on the CD, or use a CD with tape stuck on it. + Do not use disc type accessories. + Clean from the center of the disc and move outward. + When removing CDs from this unit, pull them out horizontally. + Ifthe CD center hole or outside rim has burrs, use the CD only after removing the burrs with à ballpoint pen etc. CDs that cannot be used + CDs that are not round cannot be used. + CDs with coloring on the recording surface or CDs that are dirty cannot be used 2 This unit can onby play the CDS with gr (EE UE This unit may not correctly play discs which do not have the mark. + You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD- R/CD-RW recorder instruction manual.)

8 © KVT-819DVD/KVT-839DVD

01_B64-3713-00 Englishindd 8 List of playable discs Disc Standard Support Remark types DD DVD Video o DVD Audio Q DDR o

HOT © MPEG/Divk Playback Muiti-border/Muisession/ TT {Playback depends on authoïing conditions) Compatible with 8-cm (3 DVD+RW © inh)diss DID-RDL Dub le © DVD-R DL (Double layer — © On Video format DID-RAM x Q) Must CD ONCE EE] discs supported. CHON © MPAMMAAACIPEGT © Dix playback © Mursessin supported Packet write not supported. DD o Wideo CD (WCDI o Super video CD x Photo CD x G-ETRA À On muse CD session an be played Lo] À Sound quality ofnomat COmusic co] x Des Dualdisc x Super audio CD A OnyCDleeranbe played O:Playbackis possible. A : Playback is partiy possible: X: Playback is impossible. + DivX file must have the extension ‘dir, “div”, or "avi". + When buying DRM enabled contents, check the Registration Code in the <DivX Setup> (page 74) Registration Code changes each time a file with the displayed Registration Code is played to protect against copying.

01_B64-3713-00 Englishindd 9 Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map DVD disc marks Symbol Description Indicats region number The discs with this mark can be played with any DVD player. Indicats the number ofaudio languages recorded. Up to 8 languages can be recorded in a movie. You can selecta favarte language. (O)) Indicats the number of subtited languages record Up ta 32 languages can be recorded. @e. Ia DD disc has scenes shot from multiple angles, you [9 FT ansclecta favorite angl. Indicates the type of screen fr te image. Te Left mark indiats tata wide image picture (169) s displayed ana standard TV set scren (43) with black band at both the top and bottom ofthe screen letter box). Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing In this case, the following marks will appear on the screen. For more information, refer to the disc manual Prohibition Mark

Discs with limited period of use Do not leave discs with a limited period of use in this unit. If you load an already expired disc, you may not be able to remove it from this unit English

Notes About Audio files + Playable Audio file AAC-LC (m4a), MP3 (mp3), WMA (wma) + Hfmusic of normal CD and other playback systems are recorded in the same disc, only the playback system recorded at the first setout is played Playable AAC file "méa" file encoded by AAC-LC format. ‘Transfer bit rate: 16 - 320 kbps Sampling frequency: 16 - 48 kHz Playable MP3 file MPEG 1/2 Audio Layer 3 file Transfer bit rate: 8 — 320 kbps Sampling frequency: 8 - 48 kHz Playable WMA file ‘The file in accordance with Windows Media Audio {Except for the file for Windows Media Player 9 or after which applies the new functions) ‘Transfer bit rate: 48 — 192 kbps Sampling frequency: 32, 44.1, 48 kHz Playable disc media

CD-R/RW/ROM, DVD4R/RW

Playable disc file format 1$0 9660 Level 1/2, Joliet, Romeo, Long file name: {CD-R/RW/DVD+R/RW) File/Folder name: 128 characters MP3 1D3 Tag version 1.x 30 characters Limitation of structure for the file and the folder (CD-R/RW/DVD+R/RW/USB device) Maximum number of directory levels: 8 Maximum number of folders: 254 Maximum number of files per folder: 255 Maximum number of files per playlist: 7000 (USB device) Playable USB device USB mass storage class, iPod with KCA-iP300V Playable USB device file system FAT16, FAT32 About the Connection of the USB device Ifan extension cable is needed for USB device connection, usage of the CA-U1EX (option) is recommended. Normal playback is not guaranteed when à cable other than the USB compatible cable is used Connecting a cable whose total length is longer than 5 m can result in abnormal playback.

10 @ KVT-819DVD/KVT-839DVD

01_B64-3713-00_Englishindd 10 The maximum number of characters for display Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. + Playing order of the Audio file In the exemple of folder/fle tree shown below, the files are played in the order from (D to ©. co (I) G Folder. do Audio file 5 d® The Audio file plays in the order which is written by CD writing software. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. Audio files are played in the order the files are written, You can specify the order of playback by numbering files in a folder and writing them by folder. (USB device) + In this manual, the word "USB device” is used for flash memories and digital audio players which work as mass- storage-class devices. “Pod” in this manual refers to iPod connected with KCA: iP300V (Optianal accessory). iPod connected with KCA iP300V can be controlled from this unit. iPods that can be connected to KCA-iP300V are iPod nano and iPod with video. If you connect an iPod with commercially available USB cable, iis treated as a mass storage class device. For the supported formats and types of USB device, refer to www.kenwood.com/usb/. Atrach the correct extension for the Audio file (AAC: "M4, MP3:"MP3! WMA: WMA) + Do not attach the extensions to files other than the Audio file. Fthe extension is attached, the file, which is not the Audio fil, will play and outputs à loud noise, causing damage to the speaker. The files with copy protection cannot be played The unit may not be compatible with upgrade of compression format standard and additional specifications. CD-RW discs which are quick formatted by the writing software cannot be used. + When recording to the maximum CD-R/RW media capacity at once, the writing software is set to "Disc at once” File/Folder name is the number of the characters including the extensions.

+ This unit can display the following versions of MP3 ID3 tag version 1.0/ 1.1/ 22 (USB device}/ 23 (USB device) + AAC ID3 Tag cannot be displayed + Contact the sales agent as to whether your USB device conforms to the USB mass storage class specs. + Using an unsupported USB device can result in abnormal playback or display of the audio file. Even if you use the USB device conforming to the above specs, audio files cannot be played normally depending on the type or condition of the USB device. + Do not leave the USB device in the vehicle for a long time. It can deform or damage due to direct sunlight, high temperature, etc. About Video files Acceptable video files Format: MPEG1, MPEG, DivX Picture size: MPEGI: 320 x 240, 352 x 240 MPEG2: 640 x 480, 704 x 480 DivX: 352 x 240, 352 x 288, 720 x 450, 720 x 576 Audio format: MPEG1/2: MPEG Audio Layer 2 DivX: MP3, Dolby Digital Audio sampling frequencies: 32/ 44.1/ 48 kHz Audio bit rate: 32-384 kbps (Only constant bit rates) Extensions Video files must have one of the following extensions: mpg, mpeg, mpe, miv, m2v Disc formats, file and folder names and playing order are the same as those for audio files. Refer to <About Audio files> (page 10) 01_B64-3713-00_Englishindd 11 About Picture files Acceptable picture files Format: JPEG Baseline format: Up to a maximum of 8192(W) x 7680(H) pixels + Progressive format: Up to a maximum of 1600(W) x 1200(H) pixels Enlarges and reduces images up to the size shown above to fit to the screen The picture files with information attached (such as Exif) may not be displayed or operated (e.g: rotation display) proper. Extensions Picture files must have one of the following extensions: jpg. jpeg, jpe Acceptable discs, dise formats, file and folder names and playing order are the same as those for audio files. Refer to <About Audio files> (page 10) About USB device - Install the USB device in the place where it will not prevent you from driving your vehicle properly. + You cannot connect à USB device via à USB hub. + Take backups of the audio files used with this unit The flles can be erased depending on the operating conditions of the USB device We shall have no compensation for any damage rising out of erasure of the stored data. + No USB device comes with this unit. You need to purchase à commercially available USB device. Use of "DualDisi When playing a "DualDisc” on this unit, the surface of the disc that is not played may be scratched while the disc is inserted or ejected. Since the music CD surface does not conform to the CD standard, playback may be impossible. {A "DualDisc" is a dise with one surface containing DVD standard signals and the other surface containing music CD signals.) English @ 11

KENWOOD When the monitor is closed 9° ?® Open/Close the monitor Press to open or close the monitor panel

+ Do not touch the moving components when you are opening or closing the monitor. Ifyou touch the moving components, you may be hurt or the equipment may be damaged + Do not try to open or close the monitor by hand + You can automatically open or close the monitor when you turn on or of the ignition key (page 81). - Ifthe monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement s canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also canceled by the safety function. fit has occurred, remove the obstacle and press the [OPEN/CLOSE] button again.

Turns power ON/OFF Adjusts the volume Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. Attenuates the volume Press it again to cancel muting. r6O Playing a disc When you load a disc into disc loading slot ©, the disc starts playing. If a menu appears, when playing a video disc, select the desired item. + See <List of playable discs> (page 8) for a list of supported discs and formats. Remove a disc Press [Æ] (Eject) button @. Q D Play/ Pause Select a chapter/scene/track/frequency Press [&-11] button once to pause. Move control knob ® to the right or left. Press again to resume playing. Selects a music or chapter, track, or frequency. r8O@ Stop/ play Press [it] button @ to stop playing. Select a band/folder Move control knob ® up to change to the radio bands to FM1/2/3 or next folder/disc. Move control knob ® downwards to change the radio band to AM or previous folder/disc. Press [11] button @ to resume playing from the previous interrupted position.

Fast scan forward/backward Press [>] button and hold it for fast scanning forward through the track. Press [44] button and hold it for fast scanning backward through the track. Next page > English @ 13

Switches the video source The video source switches in the following order each time you press the button.

You can also turn off the video display by pressing the button longer than 1 second. When ou press the button again, the previous video display comes back on. + The Rear view camera video is displayed when the vehicles gear is in "Reverse" + Setthe "NAVIGATION" of the <AV Interface Setup> (page 76) to "RGB°/'AV-IN" to display the Navigation video.

Playing a USB device When connecting a USB device, playback starts automatically.

+ Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device. + lÉthe USB source is selected when a USB device is not connected, "No Device" is displayed + When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback wil start from the last stapped point unless the contents in the USB device is changed + Make sure that the USB device is connected firmly.

Switches the audio source The audio source is switched in the following order each time you press the button.

Receives FM/AM broadcast. (page 34)

VIDEO EemalDee Pier) Plays back the disc inserted in an external player, such as a CD changer (optional accessory) (page 24) CHI [NAME Outputs a sound signal input to the external AUX terminal (optional accessory).

San Although nothing is played back, the clock etc are displayed + You cannot switch to a source that is not connected or inserted + You can also play audio files, video files, and picture files with the Built-in Disc Player. Refer to <List of playable discs> (page 8) for the type and format of these media. + Itis necessary to set "NAVIGATION Source” of <AV Interface Setup> (page 76) ta “On” to add Navigation as an audio source that can be selected with the [SRC] button. English @ 15 01_B64-3713-00_Englishindd 15 07.2.14 3:17:33 PM

Switches the function screen The function control screen switches in the following order each time you press the button.

The following buttons are always displayed on the source control screen. [1] Displays the Source Select screen. (page 57) Returns to the Source Control screen. Displays the Audio Control Menu screen. (page 88) Displays the SETUP Menu screen. (page 70) Adjusts the Volume [6] Clock display + Touch IPEX displayed at bottom right of various screens to return to the original screen.

Switching Sub Display Press the [DISP] button to select the screen mode. Shows the status of selected source. Switches AV OUT source Switches the source that is output at the AV OUTPUT terminal when it is pressed more than 1 second.

Press the button to switche the screen mode. (page 81) The DVD Disc Menu screen appears when you press the button more than 1 second. (page 21) hes Screen Mode + DVD Disc Menu is not available when the top menu of the DVD is shown. 01_B64-3713-00_Englishindd 17

Theft Deterrent Protection panel The protection panel of the unit can be detached and taken with you, helping to deter theft. Removing the Protection panel Press the Release button @. Drawing the protection panel to left side pull it to forward and remove it. + Close the monitor fist, then remove or attach the protection panel + After you have removed the protection panel, you cannot operate the receiver + After you have removed the protection panel, you can flash the burglar alarm lamp (page 83). Reattaching the Protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Push the protection panel in until it clicks. The protection panel is locked in place, allowing you to use the unit. Two hooks English

+ For the basic method of how ta watch DVD/VCD, refer ta <Basic Operations> (page 12). + Set the remote controller mode switch to "DVD' mode before starting operation, refer to <Remote Controller mode switch> (page 92) (page 92) g the Playback Screen Basic functions are available even when the playback screen is displayed. Display the playback screen.

VCD playback screen Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. 7 0:00:05 ‘AV-OUT:AV-IN KETRA 5] Scene/Track Number Display F6] Play time Display FA Forward Scene/Track Search Area Selects the next scene (when PBC is On) or track (when PBC is Off) F8] Backward Scene/Track Search Area Selects the previous scene (when PBC is On) or track (when PBC is Off). ES Zoom Control Button Area Displays the Zoom Control buttons (page 23) 20] Information Display Button Area + The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated. [1 Switches the source Stops playing, When pressed twice, the disc is played from its beginning when you play it in the next time. Fast Forwards or Fast Backwards [4] Chapter Search (during DVD play) Searches for a chapter. Track Search (during DVD Audio play) Searches for a track. Scene/Track Search (during VCD play) Selects a scene (when PEC is On) or a track {when PBC is Off) Plays or pauses. Displays the Screen Control screen. Refer to <$creen Control> (page 61) Displays the external device control screen. Refer to <External Device Power Supply Control> (page 58) + The Easy Control Panel is hidden when you touch à central part ofthe monitor. English @ 19 01_B64-3713-00 Englishindd 19 Se

—6— Watching DVD/VCD & DVD Audio Listening Functions While Di Screen playing the Control Switches to control screen to use various playback functions. DVD VIDEO ritte Chap 70:00:08 AV-OUT:AV- DVDUDEO Title 1 Chap 1 T 0:00:05 “LMode:Fuil_'av-OUT:AV-IN1

20 @ KVT-819DVD/KVT-839DVD

01_B64-3713-00_Englishindd 20 Se When playing DVD Audio [M Ejects the disc from the built-in disc player. [21 Fast Forwards or Fast Backwards [3] Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next time. [41 Selects a chapter, a scene or a track When the play is paused, touch this button to start single-frame stepping. [5] Plays or pauses. [6] Slow Forwards or Backwards. (during DVD play) [71 Switches the button display. [8] Switches the Repeat Play operations in the following sequence. DVD: Title Repeat, Chapter Repeat, Repeat Off DVD Audio: Group Repeat, Track Repeat, Repeat Off VCD: ‘Track Repeat, Repeat Off (Available when the PEC is off) [8] Switches the play time display in the following sequence. DVD: Chapter, title, remaining titles DVD Audio: Track, Group, remaining Group vcD Track, disc, remaining discs (Effective only when the PBC function is off) Î0] Title Number Display (during DVD play) Group Number Display (during DVD Audio play)

F4] Volume Label Display When ii is appeared, the text display is scrolled by pressing it. ES Function Indicator Hé) Appears when a disc is inserted. FA Turns the PBC function of VCD On or Of. {only when VCD Ver 2,0 is in use) BvAS 8] Displays the external device control screen. See <External Device Power Supply Control> (page 58). 01_B64-3713-00_Englishindd 21 DVD Disc Menu Selects an option from the DVD Disc Menu. EX Display the Disc Menu Control screen 7 0:00:05 ‘AV-OUT:AV- [1 Calls the Menu Returns to the Disc Menu screen. [3] Selects à menu option. [4] Enters your menu selection. Returns to the previous menu screen. Displays the Top Menu. Highlight Control. Clears the Disc Menu Control Highlight Control You can select à chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. Next page » English @ 21

16) Scrolls the screen in the direction you

touch. F2 Returns to the Disc Menu Control screen. [8 Clears the Disc Menu Control. [8] Calis the Menu Control Switches the picture angle. {during program playback only) Fi] Switches the subtitle language. {during program playback only) [2] Switches the voice language. (during program playback only) Displays the Zoom Control screen. Clears the Disc Menu Control

VCD Zoom Control Displays an enlarged VCD screen. EX Display the Zoom Control screen [1] Changes the zoom ratio at 2 levels (2 times or off) each time you touch E2] Scrolls the screen in the direction you touch. E1 Clear the Zoom Control button. 01_B64-3713-00 Englishindd 23 Direct Search You can search for a DVD/VCD chapter, scene or track by entering its number. EX Select the Direct Search mode Speo Nu ) The following items can be searched directly each time it is pressed. DVD: Title, Chapter, Time, Direct number DVD Audio: Group, Track, Direct number VCD (when PBC is On): Scene, Direct number VCD (when PBC is Off): Track However, the direct search may not be supported for some discs. EX Enter a number or time When playing back a VCD, enter a PEC scene number (f PBC is On) or a track number (if PBC is OFF). + To clear our incorrect entry, press @ (CLEAR) EX Search séeé

+ The operation ends automatically if you do not operate within 10 seconds + The time search function cannot be searched correctiy at the time set up depending on particular disc. English @ 23

Music Disc &, io File Listening You can recall various control screens during CD/Audio file/Disc Changer playback.

+ Forthe basic method of how ta play a mu + Refer to <List of playable di isc/audio file, refer to <Basic Operations> (page 12) s> (page 8) for playable dis +_Refer to <About Audio flle> (page 10) for playable files [8] Displays the Screen Control screen. (page 61 for the <Screen Control>) . [8] Displays the external device control Displays a floating control panel in the screen. screen See <Extemal Device Power Supply Control> (page 58). + The Easy Control Panel is hidden when you touch a central part of the monitor Func! Control Panel " Ne [1 Switches the source. Stops playing. Fast Forwards or Fast Backwards. (only when à CD is played back on the built-in disc playen Selects à music. When you continue to touch button: Fast Fonwards or Fast Backwards, Disabled when a CD (built-in disc playen) are being played Plays or pauses. [6] Selects a folder. (only when an Audio file is played back on the built-in disc player) Selects a disc. (only when a disc is played back on the disc changer)

Starts or stops Scan Play (that plays the beginning of each music one after the other) Repeats to play (the present track). Starts or stops Random Play (to play music in random order) Switches the number of lines displayed in the Information Display. Switches the play time display between Track, Disc, and Disc Remaining Time. Track (Music) Number Display Play Mode Display Play Time Display Function Indicator Appears when a disc is inserted DB VAR Switches to control screen to use various playback Ê functions. all, Sets a name to the disc being played. See <Set Disc Name> (page 28) Displays the external device control screen. See <External Device Power Supply Control> (page 58) [1] Music information display Selects the Disc Name (See <Set Disc Name», page 28), Disc Text or Track Text. When Î is appeared, the text display is scrolled by pressing it. L2] Ejects the disc from the built-in disc player. [1 Fast Forwards or Fast Backwards [4] Stops playing the built-in disc player. When pressed twice, the disc is played from its beginning when you play it in the next time. El Selects a track [6] Plays or pauses. [7] Switches the button display. Next page > English @ 25 01_B64-3713-00_Englishindd 25 Se 07.2.14 3:17:48 PM

01_B64-3713-00_Englishindd 26 Music isc & Audio File Listening During Audio file playback Bd Music information display Selects Folder Name, File Name, Title, Artist Name, or Album Name When & is appeared, the text display is scrolled by pressing it. Ejects a disc. Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played) Stops playing. When pressed twice, the disc is played back from its beginning in the next time. Selects à file. Plays or pauses. Selects à folder. Switches the button display. Starts or stops Scan Play (that plays the beginning of each music or data one after the other) Repeats to play (the preset files or data) Go] Starts or stops Random Play (to play files of the present folder in random order) Switches the number of lines displayed in the Information Display. Folder and File Number Display Play Mode Display Play Time Display Function Indicator Appears when a disc is inserted BvAS Repeats to play the music or data of the present folder.

KVT-819DVD/KVT-839DVD

B& You can search for folders and Audio files through a hierarchy. See <Folder Select Function of Audio File)> (page 28) ES Displays music information (such as Tag and content property) of Audio file being played. H0 Displays the external device control screen. See <External Device Power Supply Control> (page 58).

During playback on disc changer Hi] Music information display Selects the Disc Name (see <Set Disc Name», page 28) or Track Text mode for text display. When 1 is appeared, the text display is scrolled by pressing it. EH Selects a track Starts Fast Forward or Fast Backward when itis held down H3] Selects a disc. (Function of Disc Changer) H4 Plays or pauses. H5 Switches the button display. H6] Starts or stops Scan Play (that plays the beginning of each music one after the other) HA Repeats to play (the present music). H8 Starts or stops Random Play (to play music in random order) 9 Switches the number of lines displayed in the Information Display. f0 Disc Number Display (Function of Disc Changer) Hi] Track Number Display 12 Play Time Display F3 Function Indicator BA Appears when a disc is inserted. BvAS F3 Repeats to play a disc (the present disc). Function of Disc Changer) I] Starts or stops Magazine Random Play (to play songs ofthe disc changer in random order). (Function of Disc Changer) 01_B64-3713-00_Englishindd 27 Sets a name to the disc being played (page 28) Displays a list of discs in the Disc changer and allows you to select the disc to listen See <Disc Select> (page 29) Displays the external device control screen. See <External Device Power Supply Control> (page 58) + The functions that can be used and the information that can be displayed will differ depending on the models being connected + The information shown wil be different depending on the Disc Changer being used + The buttons and information displayed depend on the Audio file being played and CD and Disc changer functions. English

I 01_B64-3713-00 Englishindd 28 Folder Select (Function of Audio File) Searches folders and Audio files stored in media and devices according to hierarchy. EX Start Folder Select [D Scrolls the list. [21 Lists folders and Audio files Folder opens when touched, and the Audio file is played [31 Moves to the top hierarchy level. [4] Moves up a hierarchy level [5] Returns to the original screen.

I 01_B64-3713-00_Englishindd 29 Displays a list of discs in the Disc changer and allows you to select the disc to listen. EX start Direct Select [1] Lists the discs. Plays when touched. E21 Switches the list name to Disc name or Disc Text. E] Returns to the original screen. Direct Search Searches for a disc or a track when its number is entered. During play on the built-in disc player EX Select the Direct Search mode The following items can be searched directly each time it is pressed. CD: Track number, Total play time Audio file: Folde: EX Enter a track number © @ où EX search When searching for a track: Lea]

Music Disc & Audio File Listening During play of an external disc player or disc changer EX Enter a disc or track number + The operation ends automatically if you do not operate within 10 secondés.

ré File Watching picture file (JPEG file). Function During Playback Screen Basic functions are available even when the playback screen is displayed. Display the playback screen. [1] Folder/File Number Display L2] Play Time Display E1 Forward File Search Area Selects the next file. [4] Backward File Search Area Selects the previous file. 5] JPEG: Picture Control Button Area (page 33) DivX: Sub=Off, Audio 1/1 MPEG: Not effective [6] Information Display Button Area I 01_B64-3713-00_Englishindd 31 You can recall various control screens during playback of video file (MPEG 1, MPEG 2 and DivX file) and Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen.

ne; [1 Switches the source Stops playing. F1 Selects a folder. [41 Selects a file. [5] Plays or pause. + The Easy Control Panel is hidden when you touch à central part ofthe monitor. English @ 31

Video File/Picture File Watching Functions While Displaying the Control [8] Starts or stops Scan Play (that plays the Screen beginning of each song or data one after Switches to control screen to use various playback the other. [0] Repeats to play (the preset files or data). functions. [1 Starts or stops Random Play (to play files of the present folder in random order) F2 Switches the number of lines displayed in the Information Display. Î3 Folder and File Number Display

4) Play Mode Display

15 Play Time Display P 0:00:0 H6| Function Indicator ns F7] Appears when a disc is inserted ByvAR Î18) Repeats to play the file of the present folder. BvAn

[3] You can search for folders and files through a hierarchy. See <Folder Select> (page 33) Ed Displays information of file being played 1 Displays the external device control screen. See <External Device Power Supply Control> (page 58). [1] Video/Picture information display Selects Folder Name, File Name, Title, Artist Name, or Album Name When is appeared, the text display is scrolled by pressing it. Ejects a disc. Fast Forwards or Fast Backwardks. (Disabled when a JPEG is being played) Stops playing. When pressed twice, the disc is played back from its beginning in the next time. Selects a file. [6] Plays or pauses. Selects a folder. Switches the button display.

Adjusting the video display. Searches folders and Video files/Pictures stored in media and devices according to hierarchy. EX Start Picture Control EX Start Folder Select [] Reverses the picture horizontal. E2] Rotates counter ockwise. El Rotates clockwise. [4] Ends Picture Control. [1 Scrolls the list Lists folders and Video filles/Picture files. Folder opens when touched, and the Video file/Picture file is played [3] Moves to the top hierarchy level [4] Moves up a hierarchy level. [5] Returns to the original screen. English @ 33 01_B64-3713-00_Englishindd 33 Se 07.2.14 3:17:59 PM

basic method of receiver button operations, refer to <Basic Operations> (page 12). + Set the remote controller mode switch to "AUD" mode before starting operation, refer to <Remote Controller mode switch> (page 92). Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays a floating control panel in the screen. Switches to control screen to use various functions.

[6] Switches the button display. Seek Mode [7] Turns the CRSC function On or Off. (Only when receiving the FM broadcast) [8] Selects the Auto Memory mode. {Refer to page 36 for the <Auto Memory>) [1 Switches the Seek mode. {Refer to page 35 for the <Seek Mode>) fo] Switches the number of lines displayed in the Information Display. BvA> Sets a station selection. The mode is switched in following order each time you touch the button. Display Setting En] When ME to ME buttons appear, you "AUTOT" Tunes in a station with good reception can recall the stations on memory. automatically For memory of broadcasting stations "AUTOZ Tunes in Stations in memory one af anothez. refer to <Auto Memory> (page 36) or CHANT Sith to the next frequency manual <Manual Memory> (page 36) BvAB F2) Sets a name to the station. See <Set Station Name> (page 38). [3] Searches station by program type. See <Search for Program Type> (page 39) HA] Lists and selects memorized station, See <Preset Select> (page 37). 5] Displays Radio Text screen. See <Radio text> (page 37). H6] Displays the external device control screen. See <External Device Power Supply Control> (page 58). English @ 35 01_B64-3713-00_Englishindd 35 Se 07.2.14 3:18:02 PM

Radio Listening Stores stations with good reception in memory automatically. EX Select a band you wish to store in memory Touch IEEE or CCE Auto Memory terminates when 6 stations are stored or when all stations are tuned in. + The operation ends automatically if you do not operate within 10 seconds.

36 @ KVT-819DVD/KVT-839DVD

01_B64-3713-00_Englishindd 36 Manual Memory Stores the current receiving station in memory. EX Select a station you wish to store in memory Continue to touch until the memory number appears.

© pres tr # seconds Lists and selects memorized station. EX start Preset Select En] Scrolls the list tune in. name or Program Service Name. [4] Returns to the original screen. 01_B64-3713-00_Englishindd 37 [2] Memorized stations are displayed. Touch to GB] Switches the list display name to Station Se 07.2.14 3:18:04 PM You can display the radio text. (Only when receiving the FM broadcast). EX Select a station EA nisplay the radio text Radio Text Plus Station Name: Select the Program Service Name, Title & Artist name, Station Name, Category 1/2, or Radio Text for text display. When ii is appeared, the text display is scrolled by pressing it Scrolls the Radio text plus display. Returns to the original screen. English @ 37

I 01_B64-3713-00_Englishindd 38 Radio Listening Assigns a name to a station. EX Tune in to the station to name FA Start Name set EX Enter the name See <Character Entry> (page 60) for information on how to enter a name. EX End Name set + You can enter characters only after you have applied the parking brake:

KVT-819DVD/KVT-839DVD

Direct Search Tunes in a station when its frequency is entered. EX Select a band EX select the Direct Search mode

HE Ÿ When you enter frequency, signal reception starts. Example: When you receive FM 92.1 MHz

Example: When you receive AM 810 kHz

+ The operation ends automatically if you do not operate within 10 seconds

Traffic Information Search for Program Tyl When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. EX set the Traffice information mode When the traffic bulletin starts… The Traffic Information screen appears automatically. Traffic Information screen necessary to have Traffic Information function set to On in order to have the Traffic Information screen appear automatically. + During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to trafic information its automatically the remembered volume 01_B64-3713-00 Englishindd 39 A program is tuned when you set its program type. (Only when receiving the FM broadcast) EX Enter Program Type mode 981 mhz

Program Type is displayed. Touch to select a Program Type: Scrolls the Program Type list. Search for the program type. It is displayed when the Program type is selected [4] Continue to touch more than 2 seconds, the currently receiving station is registered to have the selected program type. [5] Returns to the original screen. Searches station of the selected Program ype INTUNER PTY Select

01_B64-3713-00_Englishindd 40 ‘You can control and listen to songs in your iPod by connecting iPod with video or iPod nano to this unit with KCA-P300V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Only one iPod can be connected to this unit. Connecting an iPod Connect an iPod to this unit. [1 Forward video/audio search area Select the next video/audio. Backward video/audio search area Select the previous video/audio. Information display button area The information is display for 5 seconds. Remove all accessories such as headphone before connecting an iPod. You may not be able to control the iPod if you connect it with accessaries attached When you connect an iPod ta this unit, playback from the song you were playing on the iPod itself (Resume Function) + Ifthe played song is not a video content, "Na iPod Video Signal” is displayed on the video screen While connecting an iPo MOOD" appears on the iPod and'the iPod's control is disabled.

playing the Control Switches to control screen to use various playback functions. P 0:00:00 [1] Music Wideo Information Display Selects the Title, Artist Name, Album Name or iPod Name When ii is appeared, the text display is scrolled by pressing it. [2] Fast Forward or Fast Backward El Select Music/Video. [4] Plays or pause. [5] Switches the button display. 01_B64-3713-00_Englishindd 41 Se 07.214 3:18:11 PM [6] Starts or stops Scan Play (that plays the beginning of each music or video one after the other) Repeats to play (the preset files or data) Starts or stops Random play.* [1 Total number of music in the iPod and the music number display Play Mode Display Play Time Display BvAz Starts or stops Album Random Play (plays randomly from current album)* BvAS Display the list of music category. See <iPod List> (page 42) \ Display the list of video category. See <iPod List> (page 42) Displays the previous music/video list. See <iPod List> (page 42) Displeys information screen of music/video being played. Displays the external device control screen. See <External Device Power Supply Control> (page 58) +_* Disable when videa is being played. English @ 41

iPod Control Lists and searches music/video contained in the iPod. EX nisplay the iPod List [1] Switches list page. Categories and music are listed. Touch a category name to move its lower level. music title is displayed, the music is played by touching it IFRS is touched, all the music in its category is played. Returns to previous category. Moves to the top category. Displays the currently playing category.

*° You can control and listen to songs in your USB device by simply connecting it to the USB connector of this unit.

+ For the connection of a USB device, refer to <Basic Operations> (page 12) Functions when Displaying the Easy Functions while displaying the Control Control Panel Screen Displays a floating control panel in the screen. Switches to control screen to use various playback functions. ee)

20002000 P 6:00:0 \ [1] Switches the source. j E2] Selects a folder. {Only in Folder Select Mode) El Selects a file. [4] Plays or pause. [5] Display the Screen Control screen. (see <Screen Control> (page 61)) [6] Displays the external device control screen. See <External Device Power Supply Control> (page 58). + The Easy Control Panel display is hidden when you touch a central area of the monitor. Music information display Selects Folder Name, File Name, Title , Artist Name, or Album Name. When ii is appeared, the text display is scrolled by pressing it Removes the USB device. When "No Device” is shown, the USB device can be removed safely. If you wish to play it again while the USB device is connected, press it again. Next page » English @ 43 01_B64-3713-00_Englishindd 43 Se 07.214 3:18:13PM

USB Device Control Selects a folder. {Only in Folder Select Mode)* Selects a file. Plays or pauses. Switches the button display. Starts or stops Scan Play (that plays the beginning of each music one after the other) Repeats to play (the present music). [8] Starts or stops Random Play (to play music in random order). (Only in Folder Select Mode)* Switches the number of lines displayed in the Information Display. Track (Music) Number Display Play Mode Display Play Time Display Repeats to play the music or data ofthe present folder. (Only in Folder Select mode) DB vAS Displays the folder list. Refer to <Folder Select> (page 45) Displays the list of category. Refer to <USB List> (page 44) Displays information screen of music being played Displays the external device control screen. See <External Device Power Supply Control> (page 58) + * Disable during play list mode.

44 @ KVT-819DVD/KVT-839DVD

01_B64-3713-00_Englishindd 44 Lists and searches music contained in the USB device. EX Display the Category List [2 Returns to the origintal screen: EX select music [2] Switches to the lower level of the category. 5] Lists all the music in the selected category. [4] Moves to the upper level of the category. [5] Moves to the top category. [6] Displays the currently playing category. {Only in Category Mode) [71 Returns to the original screen.

Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. EX Start Folder Select P 00:00:05) P_ 00:00:05 En] Scrolls the list E2] Lists folders and Audio files Folder opens when touched, and the Audio file is played. E] Moves to the top hierarchy level. E] Moves up a hierarchy level 5] Displays the currently playing file [6] Returns to the original screen. 01_B64-3713-00_Englishindd 45 Se English @ 45

accessory TV Tuner connected.) Functions During TV Screen Basic functions are available even when the TV screen is displayed. Display the TV screen [1] TV Band Number Display Memory Number Display Channel Number Display Channel Up Area Increase the channel Use the <Seek mode> (page 47) to change the channel tuning sequence. Channel Down Area Decrease the channel Use the <Seek mode> (page 47) to change the channel tuning sequence. [6] Band Switch Area Switches to TV1 or T2. Information Display Button Area + ForTV picture selection and receiver button operations, see <Basic operations> (page 12} + The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated.

46 ® KVT-819DVD/KVT-839DVD

01_B64-3713-00_Englishindd 46 *? Various control screens appear in the TV Source mode. (You can only operate TV with the optional Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. Av-ouT:Av.

[M Switches the source. [21 Switches the TV band (to TV1 or TV2). [81 Select a channel Use the <Seek Mode> (page 47) to change the channel tuning sequence [1 Switches the Seek mode. (page 47 for the <Seek Mode>) [5] Displays the Screen Control screen. (page 61 for the <Screen Contral>) [6] Displays the external device control screen. See <External Device Power Supply Control> (page 58). + The Easy Control Panel display is hidden when you touch a central area of the monit

Indicates current Seek mode. Memory Number Display Channel Number Displa Switches to control screen to use various playback E Y BvAB functions. When to can recall channels on memory. For memory of broadcasting stations, see <Auto Memory> (page 48) or <Manual Memory> (page 48) BvyvAR buttons appear, you Sets a name to the tuned station. (page 49) Lists and selects memorized station. See <Preset Select> (page 48) Displays the external device control screen. See <External Device Power Supply Control> (page 58) Seek Mode Sets a station selection. The mode is switched in following order each time you touch the button. | Display Setting [1] Channel information display "AUTO" Tunes in a station with good reception E21 Switches to TV1 or TV2 automatcalh F1 Select a channel Use the <Seek Mode> (page 47) to change Fe the channel tuning sequence [4] Switches the button display. [5] Selects the Auto Memory mode. Refer to <Auto Memory> (page 48). [6] Switches the Seek mode. Refer to <Seek Mode> (page 47). Tunes in stations in memory one after another. Sitches to the next frequency manual English @ 47 01_B64-3713-00_Englishindd 47 Se

TV Watching Stores stations with good reception in memory automatically. EX Select a band you wish to store in memory Auto Memory terminates when 6 stations are stored or when all stations are tuned in. + The operation ends automatically if you do not operate within 10 seconds.

48 © KVT-819DVD/KVT-839DVD

Stores the current receiving channel in memory. EX Select a station you wish to store in memory Continue to touch until the memory number appears.

EX selects a station [1] Memorized stations are displayed. Touch to tune in Assigns a name to a station. EX Select a station you wish to name FA Start Name set EX Enter the name See <Character Entry> (page 60) for information on how to enter a name. EX End Name set + You can enter characters onfy after you have applied the parking brake 01_B64-3713-00_Englishindd 49 Direct Search Tunes in a station when its channel number is entered. EX Select a band

When you enter a channel number, signal reception starts. Example: When you receive Channel 06 + Direct Search ends automatically if you do not operate within 10 seconds. English

Control Panel Displays a floating control panel in the screen. AvouT:Av-

Switches the source. Displays the external device control screen. See <External Device Power Supply VIDEO Control> (page 58) Displays the Screen Control screen. (page 61 for the <Screen Control>) Switches to Videol [6] Switches to Video2. + The Easy Control Panel display is hidden when you touch a central area of the monitor. vie [D Switches to Videot [21 Switches to Video2. [31 Displays the external device control screen. See <External Device Power Supply Control> (page 58)

Satellite Radio‘Control (North American sales area only) #° Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only) Functions When Displaying the Easy Functions While Displaying the Control Control Panel Screen Displays a floating control panel in the screen. Switches to control screen to use various functions. Mode: Furl avour

[1] Switches the source. E21 Switches the band [1 Tunes in a station [4] Switches the Seek mode. SEEK 1: Tunes channels one after the other. SEEK 2: Selects channels in memory one after the other. [5] Displays the Screen Control screen {page 61 for the <Screen Control>) [6] Displays the external device control screen. See <External Device Power Supply Bar D Control> (page 58)

+ For system button operations, see <Basic operations> (page 12). + The Easy Control Panel display is hidden when you touch Displays information concerning music à central area of the monitor. being played Changes the display from Song Title, Artist Name, Composer Name, Channel Name, to Category Name Tunes in à station. Switches the band. [4] Switches the button display. [5] Starts or stops Channel Scan (that tunes channels one after the other) Next page » English @ 51 01_B64-3713-00_Englishindd 51 Se 07.2.14 3:19:28 PM

—6— Satellite Radio Control (North American sales area only) [61 Switches the Seek mode. £EK 1: Tunes channels one after the other. K 2: Selects channels in memory one after the other. Switches the number of lines displayed in the Information Display. Indicates current Seek mode BvAS [8] When ME to ME buttons appear, you can recall the channel on memory. For memory of channel stations, see <Channel Memory> (page 53) BvAS You can tune in by entering the desired channel number. See <Direct Channel Search> (page 53) You can tune in by specifying the desired category. See <Channel Search> (page 52) Displays the program information screen. Displays the external device control screen. See <External Device Power Supply Control> (page 58)

[] Selects a category. Displays the channel screen [21 Scrolls the category. [31 Returns to the original screen. EX Select a channel [4] Selects a channel Tunes in the selected channel [5] Scrolls the channel [6] Returns to the original screen.

© pres to # seconds I 01_B64-3713-00_Englishindd 53 Channel Memory Direct Channel Se: Stores the current receiving channel in memory. EX select a channel you wish to store in memory Continue to touch until the memory number appears Tuning in by entering the desired channel number. EX start Direct Channel Search Dani] Len en Lio Een Displays the Direct Search screen. EX Enter the channel number SAT 10Key Direct n Cave Enters the channel number. Returns to the original screen EX Tune in the channel SAT 10Key Direct n Cave English

Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner connected only) Control Panel Displays a floating control panel in the screen. [1 Switches the source. Tunes in à station. Switches the Seek mode. (See page 55 for the <Seek Mode>) Displays the Screen Control screen. {page 61 for the <Screen Control>) [6] Displays the external device control Control> (page 58) a central area of the monitor.

54 @ KVT-819DVD/KVT-839DVD

01_B64-3713-00 Englishindd 54 Switches the band (HD FM1/2/3, HD AM) screen. See <External Device Power Supply + The Easy Control Panel display is hidden when you touch Functions While Displaying the Control Screen Switches to control screen to use various functions.

Joe: Fur HD RADIO [2 Displays information concerning music being played. Switches between Station Name and Song Title display modes. [21 Switches to the HD FM1/2/3 band F1 Switches to the HD AM band [4] Tunes in a station Use the <Seek Mode> (page 55) to change the frequency switching, [2 Switches the button display.

[S] Selects the channel on memory. BvAS Hd The Receive mode switches in the following order. Auto: Automatically switches between the Digital and Analog Receive modes depending on the broadcasting type. (programs are broadcasted in both modes, the digital program s received. Also), if a program is received in the Ball Game mode (the non-displayed broadcast program), the analog program is automatically received. Digital: Receives the digital program only. Analog: Receives the analog program only. fi] Displays the tuned in music information F2] Displays the external device control screen. Refer to <External Device Power Supply Control> (page 58). utton is not displayed when there is no text information. 01_B64-3713-00_Englishindd 55 S 7 [6] Selects the Auto Memory mode. Seek Mode Refer to <Auto Memory> (page 56) [1 Switches the Seek mode. Refer to <$eek Mode> (page 55) [8] Switches the number of lines displayed in the Information Display. BvAS Sets a station selection. [HD RADIO HO FM 981 MHz The mode is switched in following order each time you touch the button. Display Setting "ALTON" Tunes in à station with good reception automatically "AUTO?" Tunes in stations in memory one after another. MNT" Sites to the next frequency manual English

HD Radio Control © press to # seconds Stores stations with good reception in memory automatically. EX Select a band you wish to store in memory

& LH au Auto Memory terminates when 6 stations are stored or when all stations are tuned in.

56 © KVT-819DVD/KVT-839DVD

Manual Memory Stores the current receiving station in memory. EX Select a station you wish to store in memory Continue to touch until the memory number appears. 01_B64-3713-00_Englishindd 56 Se 07.2.14 3:19:35 PM

splaying the Control Screen EX bisplay control screen Press several times until the Control Screen appears. EX bisplay source select screen [nl Switches to the selected source E2] Scrolls the source display. BB] Displays the external device control screen. See <E ernal Device Power Supply Control> (page 58). [4] Switches the skin. (3 types) [5] Displays the Hands-Free Control screen. See <Hands Free Unit Control> (page 62). + The displayed source depends on the type of device connected. In addition, you cannot press the button of currently unavailable source. English @ 57 01_B64-3713-00_Englishindd 57 S 7

Controlling the external device power supply. External Device Power Supply Control Controlling the external device power supply. EX Displays the EXT SW Control screen LEXT SW] appears when the control screen of each source or Easy control panel is displayed. EX controls the external device power supply [1] You can turn on or off the external device power supply. Returns to the original screen. + You must connect a commercially available relay unit in order to use this function Connect the external device to be contralled to that relay unit + Refer to <EXT SW Setup> (page 87) for information on setting the power on or off specification

58 © KVT-819DVD/KVT-839DVD

fume upon Reception of Phone call Muting Audio Volu Phone Call upon Reception of When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ('CALL') screen appears, and system is paused. Phone Call ("CALL') screen

1f you want to continue to listen to the audio source during phone call...

The system resumes audio play during the phone call When the call ends... Hang up the phone. The system resumes playing automatically. + To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessary. Refer to <INSTALLATION MANUAL> English @ 59 01_B64-3713-00 Englishindd 59 Se 07.2.14 3:19:38 PM

01_B64-3713-00_Englishindd 60 How Use the Character Entry Screen When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen [1 Shifts the cursor. Enters à space. If you erase a character, locate the cursor on it and touch this button: Enters characters. Scrolls up or down the character button display. its the Character Entry mode and returns to the previous screen. + You can enter characters only after you have applied the parking brake:

Screen Control Setting the monitor screen. EX Display Easy control panel

[1] Brightness Control Disabled if Auto Dimmer is On. E2] Tint Control Displayed for an NTSC system image on TV, Video, iPod or Rear View Camera F1 Color Control Displayed on the TV, Video, iPod or Rear View Camera screen only. [4] Contrast Control [5] Black Level Adjustment [6] Auto Dimmer Setup When tumed "On! the display is dimmed automatically when the ambient becomes dark. (1 Returns to the previous screen. 01_B64-3713-00_Englishindd 61 + The Screen Control screen is displayed only when you have applied the parking brake. + The picture quality can be set for each source. + You can set image quality of screens such as menu from <Monitor Setup> (page 81) ofthe <Setup Menu English

01_B64-3713-00_Englishindd 62 + You need to register your cell-phone to your Bluetooth Hands Free Box beforehand. Make sure to read the instruction manual ofthe Bluetooth Hands Free Box as well Control Screen Function Displaying the control screen and using various functions. EX Display the control screen Press several times until the Control Screen appears. EX nisplay the source select screen 0:00:05 [1] Displays the status of connection with the cel-phone. White: _ The cell-phone is connected. Orange: The cell-phone is not connected, or it is outside the service range. EX Display the Hands-Free Control screen

fs) fe) IG] Displays the Search for Phone Book screen: (See <Calling by Phone Book>, page 64) Displays the Out Going Calls screen (See <Redialing>, page 66) Displays the Incoming Calls screen: (See <Redialing>, page 66) Switches between the private and hands- free modes (only when à call in progress) Displays the Hands-Free Set Up screen. lat (See <Setting up the Hands-Free Phone», page 67) Enter three phone numbers for quick dialing {See <Quick Dialing>, page 64) Enters a phone number. {See <When Dialing>, page 63) Displays the signal strength The more the number of bar segments, the stronger the signal Displays the present Auto Answering status. When Auto Answering is on: When Auto Answering is off: ge Displays the battery drain of the cell- phone.* The more the number of bar segments, the higher the battery level. Starts the call Ends the call Clears the phone number being entered! Clears the entered phone number. Returns to the previous screen. Displays the calling and called phone numbers. If you have registered a phone number in the Phone Book, the destination person name is displayed

+ While your car is moving, some functions are disabled for safetys sake. The buttons associated with the disabled functions become ineffective if pressed + When the Hands-Free Control screen appears, the name ofthe connected cell-phone is displayed for 5 seconds. + * Since the number of steps of the control unit is different from that of the cell-phone, the statuses displayed on the control unit may discord from those displayed on the cel-phone. No status is displayed if information about it cannot be obtained + Setting the cell-phone in the private mode can disable the hands-free function When Called When you receive a call, you can use the hands- free phone. EX Respond to a call Hands Free When a call arrives, the Hands-Free Control screen appears automatically. EX End the call Hands Free 01_B64-3713-00 Englishindd 63 The previous screen reappears. When Dialing Make a call by entering a phone number. EX Enter a phone number Hands Free Hands Free You can start talking when the destination responds. + To clear your incorrect entry, touch ME EX End the call Hands Free The previous screen reappears. + You can input max 32 digits. English @ 63

I 01_B64-3713-00_Englishindd 64 Hands Free Unit Control Quick Dialing You can register up to 3 phone numbers for quick dialing. To register a phone number: EX Display a phone number you wish to register See the <Calling by Phone Book> (page 64), <Redialing> (page 66) and <When Dialing> (page 63). EX Register the phone number Continue to touch more than 2 seconds. To call a phone number from memory: EX Recall the phone number + Onbythe phone numbers can be registered for Quick Dialing. Therefore, the destination subscriber name and others are not displayed during dialing

KVT-819DVD/KVT-839DVD

Calling by Phone Book You can call a person using his/her phone number that you have registered in the Phone Book. EX Display the Phone Book screen The Initial Input screen appears.

Initial Input screen [M Scrolls the character array display. [2] Displays the Phone Book beginning with the name whose first character you have touched E] Returns to the Hands-Free Control screen: FA select the initial character of a person name in memory The Phone Book List screen appears.

© pres to # seconds Phone Book List screen Kenwood Dons | E41 Scrolls the list [6] Cancels the operations. ET Returns to the Hands-Free Control screen. EX Select a destination you wish to call Phone Book List EE Konwood EX Confirm the destination Phone Book List Konwood The Hands-Free Control screen appears again. The selected destination data is displayed E make a call Hands Free cu CN CE _

You can start talking when the destination responds. 01_B64-3713-00_Englishindd 65 I End the call Hands Free The previous screen reappears [5] Enters the destination name. To use the Phone Book, it must have been downloaded from the cell-phone. For more details, see the instruction: manual of your bluetooth Hands Free Box and your cell ers can be displayed for each name in the Phone Book nitials including no corresponding name will not be displayed During search, a non-accent character such as “u' is searched for instead of an accent character such as “ü* English @ 65

Hands Free Unit Control

g EX Confirm the destination You can redial, one of the last 10 phone numbers that you have called or received. EX Display the Search for Outgoing Calls or Incoming Calls screen The Hands-Free Control screen appears again. The selected destination data is displayed EX make a call mu : Outgoing Calls ncoming Calls The Outgoing Calls or Incoming Call list screen appears. Outgoing Calls or Incoming Calls screen va Gwro dt You can start talking when the destination responds EX End the call [1 Scrolls the list. Enters the destination name. Switches the Redial List between 5 numbers display and single number display. Enters the destination data and returns to the Hands-Free Control screen. Returns to the Hands-Free Control screen. The previous screen reappears. - The Out Going Call list screen or Incoming Cals list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell phone memory. EX select a destination you wish to call va Guro Gt

Setting up the Hands-Free Phone Selecting a Hands-Free Phone The Hands-Free system can be set as follows. Hands Free SETUP Au Res ax | IS) roi Dm B6p [1] Sets an automatic response time after call termination. ((2 "8") "Off": | This function can not use. "0-99": Sets to calling ring time (second) E] Sets a ringing tone output position. ront R') Outputs the tone from the front left-hand side speaker Outputs the tone from the front right-hand side speaker. "Front All: Outputs the tone from the both front speakers. 5] Sets the beep of the incoming call ("On") "On": Beep is heard "Off: Beep is canceled [4] Displays the Phone Select screen. [5] Displays the Phone Delete screen. [6] Returns to the Hands-Free Control screen. - Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone, wichever is shorter, takes effect + Select the speaker which is further from the microphone in order to prevent howling or echoes. "Front R 01_B64-3713-00_Englishindd 67 You can choose the Hands-Free phone from the list. EX Display the Hands-Free Set Up screen Front Selects the cel-phone to be used as à hands-free phone. Returns to the Hands-Free Set Up screen. EX select a Hands-Free phone you wish to use

Hands Free Unit Control Deleting the Hands-Free Phone You can cancel a registration of Hands-Free phone. EX Display the Hands-Free Set Up screen Hands Free SETUP Au Response [1] Selects the cell-phone to be deleted from the list. Returns to the Hands-Free Set Up screen. EX select a Hands-Free phone you wish to delete

01_B64-3713-00_Englishindd 68 + The Phone Book, outgoing call list, and incoming call list are deleted together with the deleted Hands-Free phone.

02_B64-3713-00_Englishindd 70 Displays the Setup Menu to set various functions. EX Display the control screen Press several times until the control screen appears. EX bisplay the setup Menu [1] The selected setup screen appears. Scrolls the setup menu:

KVT-819DVD/KVT-839DVD

You can setup a speaker network, etc. EX Display the Audio SETUP screen Touch [Audio SETUP] in the SETUP Menu (page 70). + [Audio SETUP] cannot be selected when no source is selected FA setup each item [2 Selects the speaker to set the crossover. See <Crossover Network Setup> (page 71) [21 Sets the availability of subwoofers. [31 Selects the type of front speakers. Standard” Setup for general diameter speakers Setup for small diameter speakers Setup for middle diameter speakers Wide" Setup for large diameter speakers [41 Switches to the crossover setup screen. See <Crossover Network Setup> (page 71). [5] Returns to the original screen. Narrow" Middle":

Crossover Network Setup DVD Setup You can set a crossover frequency of speakers. EX Select the speaker to set the crossover [1] Sets the High Pass Filter of the front speaker. [2] Sets the High Pass Filter of the rear speaker. E1 Sets the Low Pass Filter of the sub woofer. [4] Switches to the crossover setup screen. [5] Returns to the original screen. EX pisplay the Crossover setup screen

[6] Sets the cross over frequency. [1] Sets the sub woofer phase. (Only when "Subwoofer" is set to "On' in Audio Setup and "LPF SUB FREQ' is set to other than Through") [8] Returns to the original screen. 02_B64-3713-00_Englishindd 71 You can set up the DVD play. EX Display the DVD SETUP screen Touch [DVD SETUP] in the SETUP Menu (page 70). EX setup each item DVD SETUP Menu Language

Ati Langage _Dinamie Range

[ Selects a disc menu language* (See <Language Setup>, page 72) Selects a subtitle language.* (See <Language Setup>, page 72) [1 Selects an audio language* (See <Language Setup>, page 72) [4] Sets the dynamic range. (4 Wide)* The dynamic range is reduced by changing from ‘Wide’ to "Normal" and from “Normal” to ‘Dialog" "Dialog” makes the total sound volume becomes larger as compared with “Wide” and "Normal’ allowing you to listen to the movie's dialog more clearly. This is effective only when you are using a Dolby Digital software [5] Returns to the original screen. + * Disabled when a DVD is being played. BvyAE Next page » English @ 71

02_B64-3713-00_Englishindd 72 DVD SETUP ParenarLs De] [6] Sets an angle mark display. (4% On) Selects the screen display mode (4 16:9) 169" Displays wide pictures. 43 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen) 43 PS": Displays wide pictures in the Pan & Scan format (showing pictures cut atthe right and left ends) Displays the Parental Lock screen. (2) Off) (See <Parental Level Setup>, page 73) [8] Keep "Auto" to use* Disabled when a DVD is being played. DBvAE“ DVD SETUP Pleure Dispiay Tim Lo} < Mie ms] Selects a picture display time* (4 Middle) The Display of a JPEG picture is changed! Short’ “Middle” “Long Disabled when a DVD is being played. D vAE

KVT-819DVD/KVT-839DVD

Î Switches Group Continuous On or Off. I-Off" is selected, the group playback is stopped or menu screen is appeared at the end of the group playback. "On" is selected, the group playback is continued. F2 Switches the Video Mode of a DVD Audio disc On or Off (14 Off) If"On' is selected, a DVD Audio disc is played as a DVD Video disc. IF"Off" is selected, a DVD Audio disc is not played as a DVD Video disc. Language Setup Selects a language you use for the speech and menus. EX select the language item to set Refer to <DVD Setup> (page 71) and select [Menu Language], (Subtitle Language] or [Audio Language] DVD SETUP Menu Languag

EX pisplay the Language SETUP screen AudiolLanguage Set [1] Enters a language code. L2] Cancels the language setup and returns to the DVD SETUP 1screen: E] Sets the original audio language. {lt appears during Audio Language setup) [4] Sets the language and returns to the DVD SETUP 1 screen {lt appears after you have entered a language code) [] Clears the language code. EX Enter a language code See <DVD Language codes> (page 101) and select the desired language: EX set the language you use 02_B64-3713-00_Englishindd 73 Parental Level Setup Sets a parental level. EX pisplay the Parental Level code number screen DVD SETUP Angie Mark Refer to <DVD Setup> (page 71) and touch [Parental Level] Enters a code number. Cancels the current setup and returns to the DVD SETUP 2 screen. Indicates the present parental lock level [4] Determines the code number and displays the Parental Level setup screen. [1 Ciears the code number. EX Enter the code number + The number you enter fist is set as your code number + You can clear the code number by pressing the Reset button. Next page » English @ 73

SETUP menu Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). EX Display the DivX SETUP screen Touch [DivX SETUP] in the SETUP Menu (page 70). DivX(R) SETUP [2 Displays the registration code. EX Select a parental level and complete the [21 Returns to the original screen. setup + When downloading a DivX VOD file controlled by DRM, register the code appeared on the screen such as the one above. Otherwise the file may not be able to play with this unit Remaining number of viewing is displayed when playing a DivX VOD file with the viewing restriction. When the remaining number of viewing reached 0, a waming message appears and the file cannot be played Selects a parental level. Complete the parental level setup and returns to DVD SETUP 2 screen. a disc has higher parental lock level, you need to enter € code number + The parental lock level varies depending on a loaded disc. + Ia disc has no parental lock, anybody can play it back even when you have set the parental lock.

iPod Setup Performs setup when using iPod. EX Display the iPod SETUP screen Touch [iPod SETUP] in the SETUP Menu (page 70) EX setup each item iPod/SETUP aus Book Speed [1] Sets the Audiobook playback speed E2] Sets Wide Screen on or off. E] Returns to the original screen. “Wide Screen" cannot be set while the iPod is connected. Software Information Checks the software version of this unit. EX nisplay the Software Information screen Touch [Software Information] in the SETUP Menu (page 70) Software Information [1] Displays the software version: E2] Returns to the original screen. 02_B64-3713-00_Englishindd 75 System Setup You can set up the system parameters. EX Display the System SETUP screen Touch [System SETUP] in the SETUP Menu (page 70). EX setup each item urns the key touch tone On or Off. ([Æ) On) Allows scrolling of text display on the Source Control screen. ({Æ Auto) ‘Auto": Scrolls the screen automatically Manual’: Allows you to scroll the screen manual}. Selects à remote control signal. ((Æ On) When turned "Off" the remote control of TV reception is rejected. [4] Sets a music CD playback. ([Z 1) "1": Automatically recognizes and plays back an Audio file disc, a DVD or a music CD. "2": Forcibly plays back a disc as a music CD. Select "2" if you wish to play a music CD having a special format or if you cannot play a disc in the “1 position. Return to the original screen. You cannot play an Audio fileVCD disc in the "2" position. Also, you may not play some music CDS in the 2" position. + Your setup is disabled when the disc is being played. Next page > English

[6] Select an illumination color of receiver buttons. (Æ Red) Green": Green Red”: Red Select an illumination color of the Sub Display. (2 Blue) Blue”: À blue color display. Key Sync": The same color as the this unit buttn illumination color. Return to the original screen AV Interface Setup You can set audio and visual (AV) interface parameters. EX Display the AV Interface screen Touch [AV Interface] in the SETUP Menu (page 70). EX setup each item [1] Sets a name to be displayed when you select a system that is connected via the AV INPUTI port. ([Æ VIDEO) + Iyou have set the navigation system connection to "AV-IN' the display is fixed to "NAVI" Sets an image display of the system that is connected via the AV INPUT2 port. (3 Off)

KVT-819DVD/KVT-839DVD

Off": When the image source is switched, an image entered via the AV INPUT2 port is displayed On”: When an image signal is entered via the AV INPUT2 port, this image is displayed [3] Sets a name to be displayed when you select an image of the system that is connected via the AV INPUT2 port. (@ VDEO2) [41 Selects à navigation system connection (2 RGB) RGB”: Allows the Kenwood's Navigation System to connect via its interface cable ‘AV-IN': Allows a third-party navigation system to connect via the AV INPUTI port Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched) [5] Return to the original screen. [6] Selects an AV source to be output at the AV OUTPUT port. (2 AV-IN1) [1 Sets a method to switch to the rear view camera video display. ((Æ Off) On”: Switches to the rear view camera video display when engaging the shift knob of car to "Reverse" Off": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse" and then pressing the [VSEL] switch several times,

EE] You can ip the left and right ofthe rear view camera video display. Set to ‘Reverse and the the rear view wi be displayed left and right in mirror image on the screen. (of) E] Selects speakers used for voice guidance of the navigation system. ((4 F-Left) "F-Left: Uses the front left side speaker for voice guidance. "F-Right':_ Uses the front right side speaker for voice guidance. "Front All: Uses both front speakers for voice guidance. fo] Adjusts the volume for voice guidance of the navigation system. ((Æ 21) [M] Mutes the volume during voice guidance of the navigation system. ([4 On) When tumed ‘On! the volume level drops for voice guidance F2) Sets a selecting method of audio source from the Navigation system: "On": Allows you to select the audio source input from the Navigation system interface by pressing [SRC] or selecting it on Source Select screen "Off: The audio source cannot be selected using [SRC] or on Source Select screen. 02_B64-3713-00_Englishindd 77 Se 07.2.14 3:22:00 PM User Interface You can set up user interface parameters. EX pisplay the User Interface screen Touch [User Interface] in the SETUP Menu (page 70). EX setup each item [1] Selects the background to display. "Change": Displays images entered into this unit. Refer to <Background Select> (page 80) Enables entering or deleting of background images into of from this unit. Press MES to enter the USB suspend an! mode, and then remove the USB device. "Memory": Enables entering of background images. Refer to <Entering Background> (page 79). "Delete”: … Enables deleting of background image entered into this unit. Refer to <Background Delete> (page 79). [3] Sets whether to display the target when touching the panel. [4] Returns to the original screen. D v À Ki Next page » English @ 77

switching screens. (Æ On)

Entering Background Background Delete Loads images for background. EX Connect the device which has the image to load EX pisplay the User Interface screen El Returns to Media Select screen E] Returns to the previous folder. F1 Scrolls the list EX Load the image Rotation Angle Select/Memory [4] Rotates the image. El Returns to the Picture Select screen: + Refer to <About Picture flles> (page 11) for readable image specifications + Up to 3 images can be loaded. + This operation is not possible when USB is selected as the source. 02_B64-3713-00_Englishindd 79 Deletes the background image. EX Display Delete Image Select screen Returns to the original screen EX Delete the image Background Delete EX confirm Background Delete! Returns to the Pictrue Select screen English

SETUP menu Background Select Touch panel Adjustment Selects a image for background. EX Select Background Select screen Background Change |

[1] Returns to the initial background. Returns to the original screen EX set the image as the background Background Change" |

80 @ KVT-819DVD/KVT-839DVD

02_B64-3713-00_Englishindd 80 You can adjust the touch panel operations. EX Display the Touch panel Adjustment screen Touch [Touch] in the SETUP Menu (page 70) EX starts Touch panel setup Touch Touch Panel AGust [2 Returns to the original screen. EX Adjusts the Touch panel Touch Panel Adjust Follow the instruction on the screen and touch the center of f£! [2] Cancels the adjustment and returns to the Touch Panel Adjust screen. [1 Resets to the initial status.

You can adjust the clock time. EX Display the Clock Setup screen Touch [Clock] in the SETUP Menu (page 70) EX setup the Clock [1] Clock time display E2] Adjusts hours. G] Adjusts minutes. [4] Sets "00° minute Setup examples: 3:00 — 3:29 mp 3:00 3:30 — 3:59 = 4:00 E] Sets the clock time in synchronization with the time data sent from the RDS station. (A 0) When tumed‘On! the synchronized mode starts and the clock cannot be adjusted manual. [6] Returns to the original screen. EX Adjust the clock time 02_B64-3713-00_Englishindd 81 You can adjust the position, picture quality and the screen mode of the monitor. EX Displaying the Monitor SETUP screen Touch [Monitor SETUP] in the SETUP Menu (page 70). EX setup each item Brightness Control Disabled if Auto Dimmer is On Contrast Control Black Level Adjustment [4] Auto Dimmer Setup When tured "On' the display is dimmed automatically when the ambient becomes dark [5] Returns to the original screen. + In this Screen Control screen, you can perform setups for the menu screen, Setups for videos such as DVD can be performed on the <Screen Control> (page 61). DB vA« Next page > English

[6] Monitor Angle Adjustment Forward/Backward Monitor Position Adjustment Monitor Open/Close Setup When tumed "On, the monitor is opened or closed automatically when you turn on or off the ignition key. [8] Monitor Action Setup When set to "Quick’ the monitor is opened quickly. Returns to the original screen. D vAE Selects a screen mode of the iPod Video playback screen. You can select any ofthe following screen mode. Full, ‘Just’, "Zoom", "Normal Selects a screen mode of the DVD playback screen You can select any ofthe following screen mode. Full, ‘Just’, "Zoom", "Normal Selects a screen mode of the VIDEO playback screen. You can select any ofthe following screen mode. Full, ‘Just’, "Zoom", "Normal

82 @ KVT-819DVD/KVT-839DVD

02_B64-3713-00_Englishindd 82 F4 Selects a screen mode of the VIDEO2 playback screen You can select any of the following screen mode Full’, ‘Just’, "Zoom', "Normal" HS) Returns to the original screen: Monitor SETUP E œAM

F6 Selects a screen mode of the rear view camera (R-CAM) screen You can select any of the following screen mode Full’, ‘Just’, "Zoom', "Normal" FA Selects a screen mode of the TV screen. You can select any of the following screen mode. Full’, ‘Just’, "Zoom', "Normal" Î8) Returns to the original screen. + When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically The screen mode of these displays cannot be changed. + The picture quality can be set for each source

Full picture mode (Full) Zoom picture mode (Zoom) O O o [e) Justify picture mode (Just) O: 9 02_B64-3713-00_Englishindd 83 Security Code Setup You can set a security code to protect your receiver system against theft. + When the Security Code function is a cannot be changed and the function cannot be released. Note, the Security Code can be set as the 4 digit number of your choice. EX pisplay the Security Code Setup screen Touch [Security] in the SETUP Menu (page 70). ated, the code [1] Displays the Security code input screen. urns the DS function on or off. Itumed ‘On’, the burglar alarm lamp fiashes when the protection panel is removed. (2 On) [3] Returns to the original screen. EX Start Security Code setup + you have already completed the code registration, MGM à displayed Next page > English @ 83

02_B64-3713-00_Englishindd 84 SETUP menu EX Enter a security Code Security Code Set Input four-digit number. EX Register your security code EX Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation. + you enter a different security code, the screen returns to Step 3 (for the first code entry] I Register the security code again Security Code Set Now, your security code is registered If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code.

KVT-819DVD/KVT-839DVD

If you have pressed the Reset button or if you have disconnected the Receiver from battery... EX Enter the correct security code You must enter the same security code as that you have entered in Step 3 EX Enter the security code Now, you can use your Receiver.

Deactivating Security Code SAT ESN Watch Setup To deactivate the Security Code function. EX Display the Security Code Setup screen Touch [Security] in the SETUP Menu (page 70) FA Start to cancel a registration of the Security Code Input by four-digit number. EX Register your security code Nowr your security code is cleared! 02_B64-3713-00_Englishindd 85 You can display the SAT ID. (with the optional accessory Satellite radio connected only) EX Display ESN Watch SETUP screen Touch [SAT ESN Watch] in the SETUP Menu (page 70). EA verify ESN Displays the Electronic Serial Number. Returns to the original screen. AMP Ci [l Sets the power amp connected via the LX bus. {with the optional accessory LX Power Amp connected only) EX Displaying the Amp Control screen UP Menu Touch [Amp Control] in the Si (page 70). EX setting up Amp Control Setup option and value display Select a setup option: Selects a set value. [4] Enters the set value. [5] Returns to the original screen. Next page » English @ 85

02_B64-3713-00_Englishindd 86 SETUP menu + Forthe model name of amp you can contral from the system, see the amps catalog + Forthe options and values you can change and for the amp operation when changed, see the amps instruction manual Setup Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. EX Display the SETUP Memory screen Touch [SETUP Memory] in the SETUP Menu (page 70). SETUP Memory pri] Wouié you like to momorize or recall 1he “Audio & AV SETUP-

[1] Locks the Audio Set Up and AV Interface settings. When is selected, you cannot set the Audio Setup and AV Interface settings. Memorizes or recalls the settings. To cancel the function, touch MB To cancel memorization, touch ME The Setup Menu screen appears again. Returns to the original screen.

ETUP SETUP Memory Please select the desired function from the choco [41 Recalls the memorized settings. [5] Memorizes the current Audio Set Up and AV Interface settings. [6] Clears the currently memorized settings. [71 Returns to Set Up Memory screen EX Memorize or recall the settings When memorizing the Audio Set Up and AV Interface settings: SETUP Memory Please select the desired function

If settings have already been memorized, à confirmation message appears, Touch ME To cancel memorization, touch

Setting up power specification of the external device for which the power is controlled from this unit. EX Display the EXT SW SETUP screen Touch [Ext SW SETUP] in the SETUP Menu (page 70) EX perform EXT SW Setup Setting EXT SW Control 1 (EXT SW1) Mons uput Pat [1] Sets the name ofthe external device. See <Character Entry> (page 60) for information on how to enter the name. Sets the power signal output mode: (3 EXT SW: Pulse, EXT SW2: Level) Pulse: Generates a single power signal pulse.

Level: Continues output of high power signal

Sets to turn output on/off each time the button on the EXT SW Control screen is pressed! [3] Sets the Pulse signal output time. Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set. [4] Returns to the original screen. DB vAE Setting EXT SW Control 2 (EXT SW2) The setup method is the same as "EXT SW"! English

Control Menu Displays the Audio Control menu to set the sound effect function of this unit. EX Display the control screen Press several times until the control screen appears. EX nisplay the Audio Control menu [1 Switches to the selected Audio Control screen

88 © KVT-819DVD/KVT-839DVD

Audio Control You can adjust the front/rear and right/left audio balance. EX Display Audio Control Audio Control Menu Ze Convroi Touch [Audio Control] in the Audio Control Menu (page 88) EF Display the Audio Control screen jAudiolControl ël Esiance [2 Adjusts the right and left volume balance. [21 Adjusts the front and rear volume balance. [1 Turns the Loudness control function On or of. Itumed "On" high and low tones are automatically enhanced during low volume. [1 Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG or MP3/WMA), input channels (front or rear channels) are displayed [5] Returns to the original screen. 02_B64-3713-00_Englishindd 88 Se 07.214 3:23:12PM

amplifier (optional accessory) [7] Sets the center frequency of bass boost you have set for "AMP Bass”. If you set the center frequency to ‘Low’, it will be dropped approximately 20% to 30% [8] Adjusts the subwoofer volume. [8] Adjusts the volume of the present source based on the difference level of original volume. F0] Returns to the original screen. + Ifyou have increased the volume fist, then reduced the volume using the "Vol. Of + the sound generated if you suddenly switch to another source may be extremely loud. You may not set some models of power amp boost to #18" See the catalog or instruction manual of power amplifier 02_B64-3713-00_Englishindd 89 Equalizer C rol You can set up the equalizer. EX nisplay Equalizer Control Touch [Equalizer] in the Audio Control Menu (page 88). EX nisplay the Equalizer screen [1] Selects an equalizer curve type. You can select any ofthe following equalizer curves. - "Natural" ='Rock' ="Pops" 2'Easy" = "Top40" «az Selects items to be adjusted for tone curve setup. Iturned Off’ only Level can be setup for tone curves. [3] Displays the Tone curve setup screen. (page 90) [4] Returns to the original screen. English @ 89

02_B64-3713-00_Englishindd 90 Audio Control You can set a Tone curve. EX Display the Tone screen See <Equalizer Control> (page 89) EX set the Tone Bis, Bu we] [1] Bass adjustment items are displayed. Middle adjustment items are displayed Treble adjustment items are displayed Bass DC Extend settings (Only when Bass is selected) Iturned On" it extends the bass center frequency to the low register by approximately 20%. Tone curve becomes flat. [6] Sets the Center frequency. Sets the level Sets the Q factor. (Only Bass and Middle can be set) [8] Returns to the original screen.

KVT-819DVD/KVT-839DVD

You can set the front and rear audio source. EX Display Zone Control Audio Control Menu Touch [Zone Control] in the Audio Control Menu (page 88) area[__nermar [1 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. [21 Switches the front and rear audio sources. {This button appears when the Zone function is On) Use "Reverse” to change over the front and rear audio sources [31 Sets the front and rear audio source separately. {This button appears when the Zone function is On)

+ When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. However, if you have set the ‘Area’ to "Reverse" the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source. [4] Adjusts the volume of the rear channel {This button appears when the Zone function is On) [5] Returns to the original screen. There are following limitations when zone function is set to"On" There is no output from the subwoofer. <Audio Setup> (page 70] and <Equalizer Control> {page 89) are not available English @ 91 02_B64-3713-00_Englishindd 91 07.2.14 3:23:16PM

Rémote Controller This unit can be operated using the Remote Controller supplied with the unit.

+ Putthe Remote Controller in a place where it will not move during braking or other operations. À dangerous situation could sul ifthe Remote Controller falls down and gets wedged under the pedals while driving + Do not place the battery near an open flame or heat source. This may cause the battery to explode: + Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak Aid I spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician. + Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consuit a physician n Remote Controller mode switch Battery installa Use two "AAA'/"R03"-size batteries. The functions operated from the remote Slide the cover while pressing downwards to controller differ depending on the position of the remove it as illustrated. mode switch. Insert the batteries with the ® and © poles aligned proper, following the illustration inside the case. AUD mode vitch to this mode when controlling a selected source or à NS ) Gosmar) CD changer etc. DVD mode auv. Switch to this mode when playing DVDs ar CDs etc. with the player integrated in this unit Navi hen controlling TV. RETURN NAVI mode Gance) | This is switched when controlling Navigation unit. + Ifthe Remote Controller operates only over shorter + The position of distances or does not operate at all, it is possible that indicated in the title of each mode, eg, "(AUD mode)" the batteries are depleted. In such instances, replace the + When controlling a player that is not integrated in the both batteries with new ones. unit, select AUD” mode. e remote control mode switch is

I 02_B64-3713-00_Englishindd 93 Common operations (AUD mode) Source switching Switches to the source to be played Volume control Adjusts the volume Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume. ææstÙ Lord Dual Zone Switches the Dual Zone function ON and OFF.

Ssed) Rear volume control Adjusts volume at rear when the Dual Zone function is ON. € em VSEL Switch video Switches the video each time it is pressed. OPEN Opens or closes the monitor each time you press the key. << à Cursor key Moves the cursor when displaying menu. ENTER Enters options. 66e

Hands-free communication Enters the dialing method selection mode. When a call comes in, it answers the call. Switches the function screen

Remote Controller DVD/DVD Audio/VCD/CD/Audio files (DVD mode) Folder search Selects the folder to be played. Track search and file search Selects the track or file to be played Play/Pause Pauses the track. Press again to resume playing. Stop Memorizes the last point where the disc stopped. When pressed again, the last point is deleted PSS Ta) = Direct search eeeu Sem?

Pressing this button switches the features that can be searched directly. DVD Title number Chapter number Play time Item number* Cancel

• You may not be able to use this function with some discs or scenes.

KVT-819DVD/KVT-839DVD

DVD Audio Group number Track number tem number* Cancel Yu may not be able to use this function with some discs or scenes.

Track number Play time Cancel Audio files older number ile numbe Cancel VCD 1.X, VCD 2.X (PBC OFF) Track number Cancel VCD 2.X (PBC ON) Scene number Number Cancel Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press @ LENTERI key. Numeric keypad Specify the number to search in direct search Press D) € to fast forward/backward Switches the fast fonward/backward speed each time you press this key. Press @æ) @ to slow forward/backward Switches the slow playback speed each time you press this key.

mn À @ DVD Menu Displays the DVD menu Turns the playback control on or off while playing VCD Subtitle Switches the subtitle language. Zoom Switches the zoom ratio each time you press this key. = y w Picture Angle Switches the picture angle each time you press this key. SS0®

Switch Voice Language Switches the voice language each time you press this key. TV (TV mode) Switching Band/Video Switches between the station of the TV band to receive and video input. Channel Selection Selects the TV channel to be received. Direct tuning eeeu 2 EM? SITE Press this key first, and then specify the station to receive with the numeric keypad. Example: In case of Channel 6 (2-digit) ep € Numeric keypad + The number of the memorized station is selected. (® - @) Press the direct tuning key first, then specify the channel of the station to receive. English

Remote Controller Radio (AUD mode) NAVI (NAVI mode) Station selection Switches to broadcast stations received by the unit. «es @ w CR)

De 0 Direct tuning Afrer pressing this key, use the keypad to specify the broadcast station you wish to receive. Example: 92.1 MHz (FM) eD 6» €) Example: 810kHz (AM)

Numeric keypad To use preset tuning, press the number of a programmed broadcast station. (@D Press the direct tuning key first, then specify the frequency of the station to receive.

KVT-819DVD/KVT-839DVD

Joystick Scrolls the map, or moves the cursor. 2cbs ENTER Performs the selected function.

ROUTEM Displays Route Option menu. VIEW 270 æ MAP DIR Switches between the heading up navigation and north up navigation map displays. Hands-free communication Enters the dialing method selection mode. When à call comes in, it answers the call I 02_B64-3713-00_Englishindd 97 English @ 97

Some functions of this unit may be disabled by some settings made on this unit. El : Cannot set up the subwoofer. + Cannot set up subwoofer phase. + No output from the subwoofer. + Cannot set up the low pass filter. + Cannot set up the high pass filter. > Subwoofer is not set to On # <Audio Setup>(page 70) > The Dual zone function is enabled! ss <Zone Control> (page 90) EX Cannot set up the subwoofer phase. > Subwoofer is not set to On # <Audio Setup>(page 70) > Low pass filter is set to Through. & <Crossover Network Setup> (page 71) El : Cannot select the output destination of the subsource in the Dual zone. + Cannot adjust the volume of the rear speakers. D The Dual zone function is disabled # <Zone Control> (page 90) EX Cannot play audio files. D "CD Read” of <System Setup> (page 75) is set to "2" EX Cannot Folder select. > The Scan play or Random play function is enabled EX Cannot perform Repeat play. > The PBC function is enabled El: The Traffic Information setting is ineffective. + The Synchronize Clock setting is ineffective. + Cannot select the tuner as a Dual zone source. > HD Radio is in use. El : Cannot set up the equalizer. + Cannot set up the crossover network. > The Dual zone function is enabled & <Zone Control> (page 90)

98 @ KVT-819DVD/KVT-839DVD

02_B64-3713-00_Englishindd 98 What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General H The Touch Sensor Tone doesn't sound. 4° The preout jack is being used #æ_ The Touch Sensor Tone can't be output from the preout jack. Tuner source K Radio reception is poor. # The car antenna is not extended. «Pull the antenna out al the way. #_ The antenna control wire is not connected. «Connect the wire correctly, refering to the section on <INSTALLATION MANUAL>. Disc source H The specified disc does not play, but another one plays instead. Y_ The specified CD is quite dirty. “Clean the CD. #7 The disc is loaded in a different slot from that specified & Ejectthe disc magazine and check the number for the specified disc. W The disc is severely scratched. «_ Try another disc instead Audi H The sound skips when an Audio file is being played. The media is scratched or dirty. «Clean the media, referring to the CD cleaning ofthe section on <Handling CDs> (page 8) The recording condition is bad! “Record the media again or use another media. ile source

HD Radio source H No sound can be heard, or the volume is low. “The preset broadcast station is not transmitting in the mode that was set with <HD Radio Control> (page 54) «Please set the receive mode setting to "Auto". Vin digital AM broadcasting, receive mode switches between stereo and monaural too often. Receiving condition is bad or unstable. Stereo is chosen when receiving condition is good, and it switches to monaural when the condition becomes bad. #_ HD Radio tuner is connected to KCA-S220A or other units. Connect the HD Radio tuner directly to this unit English @ 99 02_B64-3713-00_Englishindd 99 S 7 07.2.14 3:23:32 PM

When the unit fails to operate correctiy, the cause of the failure appears on the display. Protect : Protective circuit has been activated because à speaker cord has shorted or it has come in contact with the car chassis. = Wire or insulate the speaker cord as appropriate and then push the Reset button. Hot Error: When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit. At such times this message will appear. = Use the unit again after reducing the temperature inside the vehicle. Hold Error: Activation of the protective circuit when the temperature inside the disc changer is higher than 60 degrees Celsius stops the disc changer from operating At such times this message will appear. = Use when the temperature at the site where the disc changer has been fitted has dropped Mecha Error : The disc player is malfunctioning, = Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected Error : An unplayable disc is inserted Read Error : + Disc is quite dirt. = Clean the disc, referring to the section on <Handling CDs> (page 8). + Disc is upside down = Load the disc with the labeled side up. Region code Error : The disc you wanted to play has a region code that cannot be played with this unit. Parental level Error: The disc you wanted to play has a higher level than the parental level you set.

100 @ KVT-819DVD/KVT-839DVD

02_B64-3713-00_Englishindd 100 Error 07-67: The unit is not operating correctly due to some reason or other. = Push the units Reset button. If the "Error 07-67" message does not disappear, see your nearest Kenwood dealer. No Device (USB device}/Disconnected (iPod): The USB device/Pod is selected as a source although no USB device/Pod is connected. = Change the source to any source other than USB/iPod. Connect an USB device/Pod, and change the source to USB/Pod again. No Music: The connected USB device contains no playable audio file. Media was played that doesn't have data recorded that the unit can play. USB Device Errorll: The connected USB device is rated a current capacity higher than the allowable limit = Check the USB device. Some trouble may have occurred to the connected USB device. = Change the source to any source other than USB. Remove the USB device. Authorization Error: Connection to the iPod has failed = Remove the iPod and then reconnect it. The unit does not support the iPod = Refer to <About iPod that can be connected to this unit> (page 7). Update your iPod: The iPod's software is an older version which the unit can not support = Confirm that the software for the iPod is the latest version. Refer to <About iPod that can be connected to this unit> (page 7) EXT SW: Error: Connection to the external device has failed. = Remove the external device and then reconnect it. = Tum off the power or ACC and turn it back on You can connect only one iPod: More than one iPod are connected to this unit = Disconnect all the iPods, and then reconnect only one.

Picture size 697 inches (diagonal) wide

Display system Transparent TN LCD panel Drive system TFT active matrix system Number of pixels 336,960 (480HX234VXRGB) Effective pixels 9999 % Pixel arrangement RGB striped arrangement Back lighting Cold Cathode Fluorescent Tube D/A Converter 24 bit Decoder Linear PCM/ Dolby Digital/ dts/ MLP/ MP3/ WMA/AAC Wow & Flutter Below Measurable Limit Frequency Response Sampling frequency; 192 kHz : 20 - 88,000 Hz Sampling frequency; 1764 kHz : 20 - 80,000 Hz Sampling frequency; 96 kHz : 20 - 44, Sampling frequency; 88.2 kHz : 20 - 40,000 Hz Sampling frequency; 48 kHz : 20 - 22, Sampling frequency; 44.1 kHz : 20 - 20,000 Hz Total Harmonic Distortion

section Maximum Power (Front&Rear) 50 W x 4 Full Bandwidth Power (Front&Rear) {4Q,14AV,T%THD) 2Wx4 Preout level (V) sv/10kQ Preout impedance Speaker impedance 4-80 Tone action Bass: 100 Hz + 8 dB Middle: 1 kHz + 8 dB Treble: 10 kHz + 8 dB Maximum Power Supply Current 500 mA Operating voltage 144V (11 - 16V allowable) Current Consumption 15A Installation Size (W x H x D) Main Unit: 182 x 53 x 161mm 73/16 x 2-1/16 x 6-3/8 inch Hideaway unit: 228 x 40 x176 mm 9x 1-9/16 x 6-15/16 inch Operational Temperature Range -10 °C -+60 °C Storage Temperature Range -20*C-+85 °C Weight Main unit: 2.2 kg (4.9 lbs) Hideaway unit: 1.1 kg (24 lbs) Specifica ns sub tive pixels for the liquid cryst ncorrectiy. is given as 99. or more, 00 x of pixels may not light or may light 02_B64-3713-00_Englishindd 103 English @ 103

Use of controls or adjustments or performance of procedures ather than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, ar inside the product relating to laser product safety. Kenwood Corporation 29673, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

1040. 10, CHAPTER 1, SUBCHAPTER Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment ifan unauthorized change or modification is made. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, ii is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference ta radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures: -Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver. + Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. + Consult the dealer or an experienced radio/TV technician for help. About DivX DivX is a popular media technology created by DivX, Inc. DivX media Files contain highly compressed video with high visual quality that maintains a relatively small fil size. DivX files can also include advanced media features like menus, subtiles, and alternate audio tracks. Many DivX media files are available for download online, and you can create your own using your personal content and easy-to-use tools from DivX.com. About DivX Certified DivX Certified products are officially tested by the creators of DivX and guaranteed to play al versions of DivX video, including DivX 6. Certified products qualify for one of several DivX Profiles that designate the type of video the product supports, from compact portable video to high-definition video. [ The "AAC" loga is trademark of DolbyLaboratories. | [ Apple, the Apple logo, and iPod are trademarks of Apple Inc, registered in the US. and other countries. | [ DivX DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. | [ DVP is a trademark of DVD Format/Lago Licensing Corporation registered in the US, Japan and other countries, | This product incorporates copyright protection technology that is protected by US. patents and other intellectual property rights. Use of this copyright protection technology must be autharized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited! Manufactured under license from Dolby Laboratories. Dolby" and the double-D symbol are trademarks of Dolby Laboratories. DTS" and "DTS 2.0 + Digital Out’ are trademarks of Digital Theater Systems, Inc. 02_B64-3713-00_Englishindd 104 07.2.14 3:23:34 PM