KDC-BT945U - Bluetooth Car Stereo KENWOOD - Free user manual and instructions

USER MANUAL KDC-BT945U KENWOOD

KENWOOD CD-RECEIVER KDC-X994 KDC-BT945U KDC-X794 KDC-MP745U INSTRUCTION MANUAL Kenwood Corporation Before reading this manual, click the button below to check the latest edition and the modified pages. Check the latest e Works with iPhone SD HDradio Q Bluetooth READY READY Take the time to read through this instruction manual. rity with installation and operation procedures will help you obtain the best ne.

Ag. Fami performance from your new CD-recei For your records Record a warranty car whenev ice an the product number Register Online Register your Kenwood product at www.Kenwoodusa.com © IM305_Ref_en_02_K

Contents Before use 4 Bluetooth Audio Operation 23 Connecting a Bluetooth Device Component names and functions 6 basic Operation General operation 7 Operation of hands-free phoning 24 Before Using Connecting a Bluetooth Device Common Operation Receiving à Call Menu List Operation During a Call un . Call Waiting iPod/iPhone Operation 8 Other functions Basic Operation Making a Call Selecting a song by browsing iPod Speed Dialing (Preset Dial) Play Mode Calling a Number in the Phone Book iPod Setting Calling a Number in the Call log Selecting the Search mode Dial a Number Direct Search Make a Voice Dialing Call Related Search Registering to the Preset Dial Number List Alphabet Search Display of Phone Number type (category) Skip Search My Playlist Display Settings 28 ... Basic Operation USB device Operation 14 Display Setting Basic Operation Customization of 5-line Display Mode & 3-line File Search Display Mode & iPod-ike Display Mode Play Mode Customization of Spectrum Analyzer Display Mode USB Setting Illumination Color Selection Skip Search Auriliary Input Display Setting Direct Music Search Clock and Other Functions 34 Music CD/ Audio file Operation 17 Ciockand Date Adjustment Basic Operation Initial Settings Music Search Demonstration mode Setting Play Mode Muting volume upon reception of Phone call Basic Operation of Disc Changer (Optional) Theft Deterrent Faceplate Direct Music Search Le Direct Disc Search Audio Adjustments 38 Audio Control Tuner Operation 20 Basic Operation Tuner Setting Station Preset Memory Auto Memory Entry Preset Tuning Direct Access Tuning PTY (Program Type) Program Type Preset 2 | KDC-x994/ KDC-BT945U/ KDC-X794/ KDC-MP745U Preset Equalizer curve Select Manual Equalizer Control Listening Position Selection Listening Position Fine Adjustments Dual Zone System

DSP Setup 42 Basic Operations of remote control 60 Car Type Selection : Speaker Setting Appendix 62 Car Type Fine Adjustments About Audio ile XOver Setting iPod/iPhone that can be connected to this unit Audio Preset Memory About USB device Audio Preset Recall About“KENWOOD Music Editor” . About the Cell-Phone Favorite Control 46 About the Bluetooth Audio player Favorite Preset Memory About Satellite Radio tuner (Optional) Favorite Preset Recall About HD Radio Reception (Optional) Favorite Preset Memory Delete Menu List Display Indicator items Bluetooth Setup 48 Bluetooth Setting Accessories/ Installation Procedure 69 Registering Bluetooth device . u Registering PIN Code Connecting Wires to Terminals 70 Selecting the Bluetooth device You Wish to . . . Connect Installation/Removing the Unit 71 Deleting a Registered Bluetooth device il u Downloading the Phone Book Troubleshooting Guide 73 Adding a Voice Dialing Command Setting a Voice Command for Category Specifications 76 SMS (Short Message Service) 54 Dounloading the SMS SMS (Short Message Service) Satellite Radio Tuner Control (Optional) 56 Basic Operation Satellite Radio Setting Category and Channel Search Preset Memory Preset Tuning Channel Scan Direct Access Tuning HD Radio" Tuner Control (Optional) 58 Basic Operation Station Preset Memory Auto Memory Entry Preset Tuning HD Radio" Setting Direct Access Tuning iTunes Tagging English | 3

Before use À WARNING To preven: precautions: To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. jury or fire, take the following Do not use this unit before canceling Demonstration mode! This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to <Before Using> (page

How to reset your unit Ithis unit or the connected unit (auto disc changer, etc) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed Reset button Cleaning the U: Ifthe faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth Ifthe faceplate is stained badly, wipe the stain off with à cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth

Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Unit and Faceplate Terminals + To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers. + Ithe terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth.

4 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Lens Fogging When you tum on the car heater in cold weather, dew or condensation may form on the lens in the CD player ofthe unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Notes If you experience problems during installation, consult your Kenwood dealer. When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area Characters that conform to ISO 8859-1 can be displayed. The RDS feature won't work where the service is not supported by any broadcasting station In this document, the description indicator will light means a status is displayed. Refer to <Basic Operation> (page 28) for the details of the status display. The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.

Handling CDs + Do not touch the recording surface of the CD. + Do not stick tape etc. on the CD, or use a CD with tape stuck on it. + Do not use disc type accessories. + Clean from the center of the disc and move outward. + When removing CDs from this unit, pull them out horizontally + Ifthe CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. CDs that cannot be used + CDs that are not round cannot be used. + CDs with coloring on the recording surface or CDs that are dirty cannot be used. 2 This uni can only pla the CDs with gg (EE QE This unit may not correctly play discs which do not have the mark. + You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/ CD-RW recorder instruction manual.) + 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. English | 5

Component names and functions (Release button To drop the faceplate down to open and CD can be inserted or ejected (press the button) (2 JIMENUI] button To select a song or set functions. See <Menu List Operation> (page 7). GD1IDISP] button To change display item (press the button). (4 IVOLI knob To adjust volume (turn the knob) To select menu list item (turn and press the knob). See <Menu List Operation> (page 7) for details KDCX994/KDGBT94SU : Enters Play mode Menu {press the button at least 1 second). KDCX794/KDŒMP74SU : To make a voice dialing call {press the button at least 1 second). CSISEARCH MODE] button To enter Search mode (iPod), move between folders {audio file), etc. For more details, see operations of each source described in page 8 or later. (6 Microphone (KDC-X994/ KDC-BT945U) The microphone for the hands free phone is supplied When your voice cannot be recognized due to the low microphone volume or noïses in the vehicle, adjust the microphone settings by <Bluetooth Setting> (page 48). y Input Terminal Portable audio device can be connected with the mini-plug (3.5 mm 0) + Use the mini-plug cable which is stereo type and does not have any resistance.

General operation Before Using Menu List Operation Exit of the Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. Press the [VOL] knob to quit the demonstration mode when the messages “To cancel Demo press the volume knob'are displayed (approx. 15 seconds). 2 Turn the [VOL] knob to select "YES" and press the [VOL] knob. + Demonstration mode can also be cancelled in"DEMO Mode” of Menu List mode. Refer to <Demonstration mode Setting> (page 35) Common Operation Power and source select Turns the power ON by pressing the [SRC] button. When the power is ON, select a source. + SRC Select mode 1: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. + SRC Select mode 2: Pressing the [SRC] button each time switches between sources. Tuner (TUNER or “HD RADIO") + Bluetooth Audio ('BT AUDIO") (KDC-X994, KDC-BT945U only) + USB (USB") or iPod (‘iPod') => CD (CD') + Auxiliary input (AUX) + Standby ('STANDBY") - Tuner... Keeping pressing the [SRC] button for at least 1 second turns the power OFF. + The SRC Select mode can be set in"SRC Select” of <initial Settings> (page 34). + Auxliary input source is initially set to "OFF" Set"Buil in AUX" described in <initial Settings> (page 34) to"ON" + When an optional accessory is connected, the source name for each device appears. + When connection of the iPod is recognized, the source display changes fromUSB"to "iPod Volume Turning the [VOL] knob adjusts the sound volume. The basic operating procedure for using this function is described below. The individual function items are covered in the operating procedures. Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Function items vary from source to source. For a list ofthe function items. Refer to <Menu List> (page 64) #SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.

Select the setting item Turn the [VOL] knob and press it when the desired item is displayed. Repeat the operation until your desired setup item is selected. Press the [MENU] button to return to the previous item Operation example: Music Artists L Albums Play Mode In this manual, the above selection is indicated as Select “Music” >"Playlists” >"My Best 25”. 4 Make a setting + When the“ right edge of the Turn the [VOL] knob to select a setting value, and then pi the [VOL] knob. + When the“ Press the [-@ setting value. or [#1] button to select a

Exit Menu List mode Press the [MENU] button for at least 1 second to return to the first hierarchy. Press the [MENU] button in the first hierarchy to exit the Menu List mode. + You cannot set the item with the"BÆl icon displayed: English | 7

iPod/iPhone Operation

Basic Operation Playing iPod + Connect an iPod When connected, the source is switched automatically and a song starts playing. + Select iPod source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the “iPod” display. # SRC Select mode 2: Pressing the [SRC] button repeatediy switches source. Song Select Press the [-@-4] or [æ1] button. Fast Forwards or Fast Backwards Hold down the [4] or [»-»1] button. Pause and Play Press the [»-11] button to pause or resume playback. Remove iPod Press the [»-11] button for at least 2 seconds. The unit enters the USB REMOVE mode (‘USB REMOVE"is displayed) and the iPod can be removed safely. Selecting a song by browsing iPod Display Items “Muse Phys” Pays “Artists” Artists bus” Albums Songs Songs Fodeast” [Podcasts Genres” Genres Composers”—_ [Composers 1 Select iPod source

8 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

KCA:POT (optional accessory) is required to connect an iPod 2 Enter Menu List mode Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Music”! 4 Select a song Operation type [Operation Move between items Fiurn the [VOL] knob. Select an item Press the [VOL] knob. High Speed Search Press the [DISP] or LA } / [PLAY MODE] button t scroll up or doun by a page Press the [DISP] or [ & [PLAY MODE] button for test 1 second to continuoushy Scrl up or down at high speed. Press the button again t stop scroling Return to previous rem [Press the [MENU] button. Retum to Top menu Press the [MENU] button fr at least 1 second #1 For example: Searching by Artist name. Turn the [VOL knob and press it when the desired item is displayed Select"Music" > "Artists" > Artist name > Album name > Song title Cancelling Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. + The unit memorizes the position where you have found a song in the Search mode. When you enter the Menu List mode after searching a song, the memorized position is displayed. Press the [MENU] button for at least second to move to the first hierarchy, select a Menu item, and set its parameters. + Characters which cannot be displayed are left blank. If non ofthe characters can be displayed, the browse item name and digits are displayed. Tems Display ems Display Playlists l'PUIST***"_ Podcasts P'POCTA*#" Artists PART" Genres P'GEN***" Albums Composers P'COM***" Songs

Play Mode You can select a Play Mode, such as Random play and Repeat play. 1 Select iPod source 2 Enter Play Mode Menu Press the [VOL] knob for at least 1 second. Press the [PLAY MODE] button. A You can also select from “Play Mode” in Menu List mode. 3 Select the Play Mode Turn the [VOL] knob. Display [overview “iPod by Hand” [Wen setto ON, allows you t operate Pod with the control on the Pod lON'/'OFF" “Folder Random” [Wen setto "ON, plays the music in te folder fandomb. lON/'OFE" “ATRandom” [Wen setto ON, plays al songs in Pod fandomb. lON'/'OFE" He Repeat” en set to "ON, plays the must repeatedy PON'/AOEE" {Factory setting) 4 Make a setting Press the [-@-4] or [æ1] button. 5 Exit Play Mode Menu Press the [MENU] button. Press the [PLAY MODE] button. Remarks + AllRandom + The time required to turn on the all random function may become longer depending on the number of songs: n iPod Turing on the all random function changes the iPod browse item to “Songs” This browse item will not be changed even ifthe all random function is turned off. + Ifthe browse item is changed to search for music while the all random function is on, the all random function is turned off and the songs in the browse item are played at random + iPod by Hand (iPod Control by Hand Mode) Alows you to operate iPod with the control on the iPod + Inthe iPod Control by Hand Mode, iPod cannot be operated using this unit + This mode is not compatible with music information display. The display will show “iPod by Hand Mode” + iPod can be operated when it conforms to the iPod control function. od Setting You can select following iPod Setting items. 1 Select iPod source 2 Enter Menu List mode Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”. 4 Select the setting item Turn the [VOL] knob and press it when the desired item is displayed. Display lverviewr Setings” FSkip Search” |Sets the ratio ofskip performed vth < Skip Search> (page 12) O.506"/"196"/"50"/"1006" FDelete My |Deletes the registered My Playlist. Pise" Refer to <Deleting a Song from te Playist> page 12) for the operation l'One"/'AI" => “Yes” "No" (___: Factory setting) 5 Make a setting + When the“ icon is displayed (at the right edge of the display) Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. + When the“ icon is not displayed Press the [4-4] or [»-»1] button to select a setting value. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. + The setting of"Skip Search'in <iPod Setting> (page 9) and that in <USB Setting> (page 15) are always the same. Changing the setting of one reflects the other. English | 9

iPod/iPhone Operation Selecting the Search mode Direct Search You can select the most suited search method for the desired song from 4 types of the Search mode. Normal playing Display [overview “Direct Search ou can quiciy search the desred song by specifing ts Search item [artist album, etc} and initial, fer to < Direct Search> (page 10) Related Search” (Searches for music ofthe same artist or genre es the one being played Refer to <ReatedSearch> (page 1). My Playlist” [Registers a song to My Playlist and play. “Delete My Playlist |Refer to <My Playlist> (page 12). Register MyP-Ist" Browsing Display [overview “Direct Search ou can quiciy search the desred song by specifing t Search item (artist, album, etc} and initial, fer to < Direct Search> (page 10) FAiphabetSearc”— Nou can select an alphabetc character rom ie listinthe Search item (artist, album, etc} selected non: Refer to <Aphabet Search> (page 11) You can quickly search the desired song by specifying its Search item (artist, album, etc.) and initial. 1 Select iPod source 2 Press the [SEARCH MODE] button. 3 Enter Direct Search mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Direct Search". 4 Select the Search item Turn the [VOL] knob and press it when the desired Search item is selected. Skip Search” he number ofsongs to be skpped is determined by the ratio ofthe total number of songs in te ist ich is selected now. Refer to <Skip Search> (page 12). FRegister MyP-Tst— [Register a song to My Papi Refer to <My Playst> (page 12). Select iPod source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the “iPod' display. 22 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source

Enter Search mode Press the [SEARCH MODE] button. 3 Select the Search mode Turn the [VOL] knob. 4 Start the search mode Press the [VOL] knob. Cancelling Search mode Press the [SEARCH MODE ] button. Display Îtems Display Îtems FLAYLSTS" [Plays PODCASTS" [Podcasts ARTISTS” faists GENRES” (Genres ALBUMS" (Albums COMPOSERS" _ [Composers SONGS" Songs 5 Select the character to be searched for Operation type [Operation Move between items ur the [VOL] knob. Select an rem Press the [VOL Knob Bove to te next con [Pres te a] or Dow] Duton. Up to 3 characters can be entered 6 Determine the selected initial Turn the [VOL] knob and press it when the desired item is displayed. Select “DONE". Start search. When search is completed, the music search mode is selected again at the selected character position. After this step, you need to browse. See step 4 of <Selecting a song by browsing iPod> (page 8) to select à song Cancelling the Direct Search Press the [SEARCH MODE] button. + Characters that can be entered are alphabetical characters (A to 2), numerical characters(O to 9), and" *" + **"indicates characters other than alphabetical and numerical characters. You cannot enter any more characters when entering" * ‘in the fist character position. + Hfthe first character string begins with an article "aan or”the”in the Direct Search mode, it is searched for in defiance of the article.

10 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Related Search Alphabet Search Searches for music ofthe same artist or genre as the one being played. 1 Play the music in iPod 2 Press the [SEARCH MODE] button. 3 Enter Related Search mode Turn the [VOL] knob and press it when the desire item is displayed. Select “Related Search’.

Select the Search item Turn the [VOL] knob and press it when the desired Search item is selected. Display Searches music “Search Anis [Displys the album ofthe same artist. “Search Abu [isplays music in he album in which the one beng played included. Displys the artist ofthe same genre. “Search Genre” You can select a song by alphabet. This function Searches songs whose name contain the specified character(s) in the list of the selected Search item artist, album, etc). 1 Select iPod source 2 Enter browsing mode Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > item. 3 Enter Alphabet Search mode Press the [SEARCH MODE] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Alphabet Search” 4 Search for item Search Composer” [Displys the album induding music created by the same Composer. After this step, you need to browse. See step 4 of <Selecting a song by browsing iPod> (page 8) to select à song. Cancelling the Related Search Press the [SEARCH MODE] button. + Related search cannot be performed while playing the Podcast + When the music being played has no information on browsing items or no music was found, "Not Found'is displayed Operation type [operation Select the character Press the [DISP] or LÀ } / [PLAY MODE] button. Move between tems un the [VOL] knob. Select an tem Press the [VOL] Hnob. Return to previous rem [Press the [MENU] button. After this step, you need to browse. See step 4 of <Selecting a song by browsing iPod> (page 8) to select a song. Cancelling the Alphabet Search Press the [SEARCH MODE] button. + The time of search by alphabet may become long depending on the number of songs or items in iPod + Hfthe fist character string begins with an article "aan, or”the”in the Alphabet Search mode, it is searched for in defiance of the article. English | 11

iPod/iPhone Operation Skip Search My Playlist You can scroll up or down according to the number of the selected Search items so that you can quickly switch the display position. 1 Select iPod source 2 Enter browsing mode Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > item. 3 Press the [SEARCH MODE] button. 4 Enter Skip Search mode Turn the [VOL] knob and press it when the desired item is displayed. Select”Skip Search”. 5 Search for item Operation type Operation Move between items __ [Tumm the [VOL] Knob. Select an tem Press the [VOL] knob. Skip Search Press the [DISPI or RQ I 7 TPLAY MODE] button Keep pressing te button fr 3 seconds or longer skips songs at 10% irespective af he setting Sesthertoofsp— [Pressthelké@lor he» button performed Return to previous tem [Press the [MENU] button. After this step, you need to browse. See step 4 of <Selecting a song by browsing iPod> (page 8) to select à song. Cancelling the Skip Search Press the [SEARCH MODE] button. + Setthe ratio with "Skip Search'in <iPod Setting> (page 9). Allows you to register your favorite songs in the Playlist of this unit. You can register up to 10 songs in the Playlist, Registering Songs in the Playlist 1 Play the song you want to register 2 Press the [SEARCH MODE] button. 3 Register the song Turn the [VOL] knob and press it when the desired item is displayed. Select “Register My Playlist" “#4 Stored (Registration numben)"is displayed + Make a Playlist from the songs stored in one iPod. I you attempt to register a song stored in a different iPod, “No Information’ appears and then "Delete My Playlist" appears. SelectVes’to delete the Playlist when you want to remake it. + The song displayed in the Music Search mode can be registered in the same manner. For how to use the music search function, refer to <Selecting a song by browsing iPod> (page 8) + you attempt to register the eleventh song, "Memory Full appears and you cannot register it accordingly. To register the song, delete an unnecessary song. + Do not register Podcasts. Songs you do not want to register may be registered, or playback may not be carried out correctly. Playing the Song in the Playlist 1 Press the [SEARCH MODE] button. 2 Enter My Playlist mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Recall My Playlist’! 3 Play the song in the Playlist Turn the [VOL] knob and press it when the desired item is displayed. Select the song you want to play. + Tuning ACC OFF or the power OFF cancels the My Playlist mode + The ending of a sang may be cut unless the song has à silence of 1 second or longer at the end + Random play cannot be performed during playback of a song in the Playlist. Deleting a Song from the Playlist 1 Press the [SEARCH MODE] button.

12 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

2 Enter Delete Playlist mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Delete My Playlist”. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select "Delete One” or "Delete All. Selecting‘Delete All moves to step 5 and all songs are deleted 4 Turn the [VOL] knob and press it when the desired item is displayed. Select the song you want to delete. 5 Turn the [VOL] knob and press it when the desired item is displayed. Select “Yes” “Complete'is displayed! + You can also delete all songs from the Playlist by selecting"Delete My Playlist” described in <iPod Setting> (page 9) + fyou connect the different iPod from ane registered to My Playlist, "Delete One” and Delete Al! will not appear and all songs be deleted English | 13

USB device Operation When connecting the USB device, usage of the CA-UTEX (option) is recommended SRC MENU VOL DIsP SEARCH MODE Basic Operation File Search Selecting the file you want to listen to from the Playing USB devil laying 'evice device being played now. + Connect a USB device When connected, the source is switched USB device automatically and a song starts playing. Display Îtems + Select USB source Mask Folder or fe name is. Press the [SRC] button. Turn the [VOL] eus . knob and press it when the desired item is Music Editor media displayed. Display Items Select the “USB" display Music” A SRC Select mode 2: Pressing the [SRC] button Pass repeatedly switches source. Anis Moving to the next folder = LT Press the [SEARCH MODE] button. a Cr Song Select Press the [4-4] or [>>] button. 1 Select USB source Fast Forwards or Fast Backwards 2 Enter Menu List mode Hold down the [+4] or [»-»] button. Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired item is displayed. + No sound is output while pl dio fil ie lo sound is output while playing audio file. Select“Musie” Pause and Play 4 Select a file Press the [»-11] button to pause or resume playback. {Operation type operation . Move berweenems —__[lumthe [VOL 4nob Remove USB device Selecan tem Presse [VOL Enob Press the [»-11] button for at least 2 seconds. High Speed Search Press the DISPL or I IPLAY MODE] The unit enters the USB REMOVE mode ("USB button t co up a doun by a page REMOVE"is displayed), and the USB device can be Presse DSP or { (PLAY MODE] removed safely. ton for at let 1 second t comnuous)y Scrl up or down at high speed. Press the button again t stop scrling Return to previous rem [Press the [MENU] button. Retum to Top menu Press the [MENU] button fr at least 1 second 2: For example: Searching for @. Turn the [VOL] knob and press it when the desired item is displayed Select'Music"> © > À > D®

14 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Cancelling Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. + When you search a song in the File Search mode, the unit memorizes the position ofthe song being played after the search, To set a different Menu item after searching a song, press the [MENU] button for at least 1 second to move to the first hierarchy Play Mode You can select a Play Mode, such as Random play and Repeat play. Select USB source

Enter Play Mode Press the [VOL] knob for at least 1 second. Press the [PLAY MODE] button. #3 You can also select from “Play Mode" in Menu List mode.

Select the Play Mode Turn the [VOL] knob. [Overview Ninen setto* ON, plays the intro ofthe music in he folder successely ON'/"OFF" Nien setto “ON plays the musicin the folder fandomiy ON'/'OFF" Men se to*ON plays the music repeatedh l'ON'/'OFF" Men seto*ON plays the music in he folder repested ON'/"0FF" Folder Random” Fe Repeat” Folder Repeat” (Factory setting) 4 Make a setting Press the [-@-4] or [æ1] button. 5 Exit Play Mode

Press the [PLAY MODE] button. USB Setting You can select following USB Setting items. 1 Select USB source 2 Enter Menu List mode Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”. 4 Select the setting item Turn the [VOL] knob and press it when the desired item is displayed. Display overview Setings” FSkip Search” |Sets the ratio ofskip performed vth < Skip Search> (page 16) l'OS" "196" /"59"/ "100" {__: Factory setting) 5 Make a setting Press the [4-4] or [b-»1] button. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. + The setting of"Skip Search'in <iPod Setting> (page 9) and that in <USB Setting> (page 15) are always the same. Changing the setting of one reflects the other. English | 15

USB device Operation Skip Search You can scroll up or down according to the number ofthe selected Search items so that you can quickly switch the display position. 1 Select USB source 2 Enter File Search mode Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > item. 3 Enter Skip Search mode Press the [SEARCH MODE] button. 4 Search for music Operation type [Operation Move between tems [Turn the [VOL] knob, Select an item Press the [VOL] Knob. Skip Search Pres te [DSP] or Sa 7 IPLAY MODE] baton Keep pressing the button for 3 seconds or longer skps songs at 1096 imespective of ie seting Sets te rar ofskip peromed Press the [He] or [bi] button. Return to previous item [Press the [MENU] button. After this step, see step 4 of <File Search> (page 14) to select a song, Cancelling the Skip Search Press the [SEARCH MODE] button. + This operation is effective only for the files registered in the database created with KENWOOD Music + Setthe ratio with"Skip Search'in <USB Setting> (page 15). itor. Function of remote control Direct Music Search Searching the music by entering the file number. 1 Enter Direct Music Search mode Press the [DIRECT] button on the remote control. 2 Enter the music number Press the number buttons on the remote control. 3 Search the music Press the [4-4] or [b-»1] button. Cancelling Direct Music Search Press the [DIRECT]] button. + Direct Music Search cannot be performed during playing ofMusic Editor” media, Random play, or scan play.

Basic Operation Drop open the faceplate Press the Release button. + Push the faceplate on the left side, and return it to its former position. Disc play + A disc inserted. When inserted, the source is switched automatically and a song is starts playing. When a CD is inserted, the “CD-IN”indicator is ON. + Select CD source Press the [SRC] button.Turn the [VOL] knob and press it when the desired item is displayed. Select the”CD' display. 4 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. Disc ejection Press the [A] button. Moving to the next folder Press the [SEARCH MODE] button. + This operation can be performed only for the Audio file: Song Select Press the [-@-4] or [æ1] button. Fast Forwards or Fast Backwards Hold down the [4-4] or [>] button. + No sound is output while playing audio file Pause and Play Press the [b-11] button to pause or resume playback. Function of Internal CD source Music Search Selecting the music you want to listen to from the disc being played now. Display overview Music” Track list (Music CD) / Folder or file name list Audio file) 1 Select CD source 2 Enter Menu List mode Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Music”! 4 Search for music “Operation type Move berween items Select an tem High Speed Search [Operation ur the [VOL] knob. Press the [VOLT Knob Press the [DISPT or LR I 7TPLAY MODE] button t scroll up or doun by a page Press the [ISP] or [ K / [PLAY MODE] button for test 1 second to continuoushy Scrl up or down at high speed. Press the button again t stop scrling. Press the [MENU] button Press the [MENU] button fr at least 1 second Return to previous em Retum to op menu Cancelling Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. English | 17

Music CD/ Audio file Operation Play Mode You can select a Play Mode, such as Random play and Repeat play. 1 Select CD source 2 Enter Play Mode Press the [VOL] knob for at least 1 second. Press the [PLAY MODE] button. #3 You can also select from “Play Mode" in Menu List mode.

Select the Play Mode Turn the [VOL] knob. Music CD source Display Tverview “Track Scan” Wen set to-ON, lys te intro ofthe music on FDiscRandom” [When setto ON, plays re music onthe disc fandomby ON'/*OFF" Men setto "ON plays the music repeatedh, ad Repeae (Factory setting) rce Display [overview “le Scan [When set to"ON", plays the intro ofthe music on he sc successive ON"/'OFS Men setto*ON plays the music on he disc Folder Random” le Repeat” ON'/'OFF Folder Repeat®—|Whensetto "ON, las te music onthe disc repested ON'/"0FF" {Factory setting) Disc changer source Display [Overview “rack Sean” Minen se to" ON, plys the intro ofthe music on he sc successive Men seto*ON plays the music on he disc fandomby ON'/*OFF" Men setto"ON, plays the music in he disc changer randomhy l'ON'/'OFF" Magazine Random TrakRepeat— [Whensetto ON plays the music repeatedhy lON"/'OF" DiscRepeat" [When setto ON plays themusiconthe disc repestedy ON'/"OEF" CL :Factory setting) 4 Make a setting Press the [4-4] or [b-»1] button. 5 Exit Play Mode

Press the [PLAY MODE] button. Basic Operation of Disc Changer (Optional) Select CD changer source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the*CD CHANGER" display. #SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. Moving to the next disc Press the [SEARCH MODE] button. Song Select Press the [4-4] or [b-»1] button. Fast Forwards or Fast Backwards Hold down the [4-4] or [>] button. Pause and Play Press the [b-11] button to pause or resume playback.

18 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Function of remote control Direct Music Search Searching the music by entering the track number. 1 Enter Direct Music Search mode Press the [DIRECT] button on the remote control. 2 Enter the music number Press the number buttons on the remote control. 3 Search the music Press the [#4] or [>>] button. Cancelling Direct Music Search Press the [DIRECT] button. + Direct Music Search cannot be performed during playing of Random play or scan play. Function of disc changer with remote control Direct Disc Search Searching the disc by entering the disc number. 1 Enter Direct Disc Search mode Press the [DIRECT] button on the remote control. 2 Enter the disc number Press the number buttons on the remote control. 3 Search the disc Press the [FM] or [AMI] button. Cancelling Direct Disc Search Press the [DIRECT] button. + Direct Disc Search cannot be performed during Random play or scan play. + Input*0"to select disc 10. English

Hd« pi Basic Operation Selecting Tuner source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the“Tuner' display. 22 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source Selecting the Receiving Band

desired item is displayed. Select“FM1”,“FM2’ “FM3” or “AM” Selecting the Receiving station Press the [-@-4] or [1] button. A Details of the station selecting in operation are set in the "Seek Mode” of <Tuner Setting> (page 20) Tuner Setting You can select following Tuner Setting items. 1 Select Tuner source 2 Enter Menu List mode Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select Settings”. 4 Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed. Display [verviewr “Setings” Seek Mode” |Selecs the tuning mode ofthe red. Auto’ Automatic search for a station Auto": Search in order fthe stations in the Preset memory Manual”: Normal manual turing control FFarced MONO" |You can reduce the noise when stereo Droadcasts are received as monaural. OFF" (Factory setting) 5 Make a setting Press the [4-4] or [b-»1] button. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. Remarks + Forced MONO Strong electrical fields (such a: cause unstable sound quality 4 a situation, turn it OFF. rom pawrer lines) may vhen it is set to ON. In such + Traffic information (TI) Turns ON or OFF the Traffic Information fui When the function is set to ON,"Tl'indi traffic bulletin starts when the function is ON, “Traffic INFO" is displayed and traffic information is received. Ithe volume is adjusted during reception of traffic information, the adjusted volume is memorized automatically. The memorized volume wi be applied next time the Traffic Information function is turned ON

20 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

Station Preset Memory Preset Tuning Putting a station in the memory. 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory 2 Enter Menu List mode Press the [MENU] button. 3 Enter Preset Memory mode Turn the [VOL] knob and press it when the desired item is displayed. Select “List & Memory". 4 Select the number to put in the memory Turn the [VOL] knob and press it for at least 2 seconds when the desired item is displayed. Select a preset number. Display overview “List & Memory" El Preset number 1 El Preset number 2. F5 Preset number 6 Cancelling the Preset Memory mode Press the [MENU] button for at least 1 second, and then press it again briefly. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the radio band you wish to store in the preset memory 2 Enter Menu List mode Press the [MENU] button. 3 Enter Auto Memory Entry mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “Auto Memory". 4 Open Auto Memory Entry Turn the [VOL] knob and press it when the desired item is displayed. Select “VES". When 6 stations that can be received are put in the memory, auto memory entry closes. Recalling the stations in the memory. 1 Select the radio band 2 Select a desired station in the memory Turn the [VOL] knob and press it when the desired item is displayed. Select "List & Memory” > Preset number. Function of remote control Direct Access Tuning Tuning in a desired radio station by entering the frequency.

Select the radio band Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. “is displayed 3 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency [Press button

810 Hz (AM) 8, [), 0) 4 Tune in to the entered frequency Press the [#4] or [æ>1] button. Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. English

Tuner Operation Function of KDC-X994/KDC-X794 PTY (Program Type) Function of KDC-X994/KDC-X794 Program Type Preset Selecting the Program Type below and searching for a station. Program Type Display ech S Music Program iype [DK Soi Nostage Music” CassicRodk du His SoftRodk Top 40 County Oldies + Speech and Music include the Program type shown below. Speech: Items in the white letters. Music: Items in the black letters. 1 Enter Menu List mode Press the [MENU] button. 2 Select the FM band Turn the [VOL] knob and press it when the desired item is displayed. Select"FM1"“FM2”, or"FM3". 3 Enter Menu List mode Press the [MENU] button. 4 Enter PTY mode Turn the [VOL] knob and press it when the desired item is displayed. Select “PTY Search”. 5 Select the Program Type Turn the [VOL] knob. 6 Search for the selected Program Type station Press the [-@-4] or [æ1] button. 7 Exit PTY mode Press the [MENU] button. + This function cannot be used during a traffic bulletin or AM reception + When the selected Program Type is not found, "No PTY" is displayed. Select another Program Type. + The operation ends automatically if you do not operate within 30 seconds. Putting the Program Type in the Preset button memory and quick recall. Presetting the Program Type 1 Select the Program Type to preset Refer to <PTY (Program Type}> (page 22). 2 Enter Program Type Preset mode Press the [SEARCH MODE] button. 3 Select the number to put in the memory Turn the [VOL] knob and press it for at least 2 seconds when the desired item is displayed. Select preset number. Recalling the preset Program Type 1 Enter PTY mode Refer to <PTY (Program Type}> (page 22). 2 Enter Program Type Preset mode Press the [SEARCH MODE] button. 3 Select a desired Program Type in the memory Turn the [VOL] knob and press it when the desired item is displayed. Select preset number. 22 | KDC-x994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

Connecting a Bluetooth Device Before use the Bluetooth device, you need to connect Bluetooth device to this unit. Pairing (Registering from Bluetooth devices) To make your Bluetooth Audio player usable with this unit, you need to register it (pairing). T Turn on this unit Press the [SRC] button. 2 Start registering this unit by operating the Bluetooth device By operating the Bluetooth device, register the audio player (pairing). Select'KENWOOD BT CD/R- 4P1°/"KCA-BT200" from the list of connected units. 3 Enter a PIN code Input the PIN code (“0000”) in the Bluetooth device. Check that registration is complete on the Bluetooth device. #2PIN code is set to “0000” as the default. You can change this code. Refer to <Registering PIN Code> (page 50) 4 By operating the Bluetooth device, start Bluetooth connection. + Ifpairing does not succeed, try followings. — PIN code is set t0"0000" See <Registering PIN Code> (page 50) Turn offthe power of this unit and turn it back on. And then try the pairing operation again. — If other audio players have been registered, delete them. And then try the pairing operation again. See <Deleting a Registered Bluetooth device> (page 51) + When registering from this unit refer to <Registering Bluetooth device> (page 49). + For details on the Bluetooth Audio player which can be connected, see <About the Bluetooth Audio player> (page 63). Selecting Bluetooth Audio source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the"BT Audio" display. # SRC Select mode 2: Pressing the [SRC] button repeatedly switches source Pause and play Press the [»-11] button. Music Search Press the [-@-] or [1] button. + All or some of the operations above cannot be performed if the Bluetooth audio player is not ready for remote control. Switching to the Bluetooth audio source does not start or stop playback automatically. Perform the operation for starting or stopping playback. Some audio players cannot be controlled remotely or reconnected after Bluetooth disconnection. Operate the main unit of the audio player to connect Bluetooth English | 23

Connecting a Bluetooth Device Before use the Bluetooth device, you need to connect Bluetooth device to this unit, The following 3 steps procedure is necessary. EX Pairing (Registering from Bluetooth devices) To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing) T Turn on this unit Press the [SRC] button. 2 Start registering this unit by operating the Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing). Select KENWOOD BT CD/R-4P1"/"KCA-BT200" from the list of connected units. 3 Enter a PIN code Input the PIN code (“0000”) in the Bluetooth device. Check that registration is complete on the Bluetooth device 4 PIN code is set to "0000" as the default. You can change this code. Refer to <Registering PIN Code> (page 50). 4 By operating the Bluetooth device, start hands- free connection. EXTZA connection you have registered 2 or more cell-phones, you need to select one of them. For more details, see <Selecting the Bluetooth device You Wish to Connect> (page 50). When a cel-phone is connected, the *BT”indicator is light up. EXTEX #ands-free phoning You can do hand-free phoning when the connection is made. + When registering from this unit, refer to <Registering Bluetooth device> (page 49) - For details on the Bluetooth cell-phone with the hands- free function, see <About the Cell-Phone> (page 63) Receiving a Call Answering a Phone Call Press the [VOL] knob. + The following operations disconne: Insert a CD. Connect a USB device. + The name of the calling party is displayed if it has already been registered in the Phone Book. Rejecting an Incoming Call Press the [SRC] button or press the [RQ] / [PLAY MODE] button for at least 1 second. During a Call Disconnecting a Call Press the [SRC] button or press the [RQ] / [PLAY MODE] button for at least 1 second. Switching to the Private Mode Press the [»-11] knob. Switches between Private talk (PRIVATE) and lands-free talk each time this button is pressed. + Depending on the type of your cell-phone, switching to the private talk mode may select the source that was used before commencing the hands-free connection this happens, the source cannot be sw the hands-free talk mode by operatin your cel-phone to return to the hands free talk mode Adjusting the Voice Volume during a Call Turn the [VOL] knob. Call Waiting Answering Another Incoming Call with the Current Call Suspended 1 Press the [VOL] knob. 2 Turn the [VOL] knob and press it when the desired item is displayed. Select “ANSWER".

24 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

Answering another Incoming Call after Terminating the Current Call Press the [SRC] button. Continuing the Current Call 1 Press the [VOL] knob. 2 Turn the [VOL] knob and press it when the desired item is displayed. Select “REJECT". Answering the Waiting Call after Terminating the Current Call Press the [SRC] button. Switching between the Current Call and W. Press the [VOL] knob. Each pressing of this knob switches the calling party. Other Functions Clearing the Disconnection Message

KDC-X994 [KDC-BT945U

Press the [K,.] button. Press the [PLAY MODE] button for at least 1 second. “HF Disconnect" disappears. Making a Call 1 Enter Bluetooth mode Press the [K, ] button. Press the [PLAY MODE] button for at least 1 second. 2 Select a dialing method Turn the [VOL] knob and press it when the desired item is displayed. Display [overview “Preset GI (Caling a number inthe prese. “Phoneboo”— |Seleting he intl to be searchedforthe phone book Fn GI (Galing a numberin the incoming cal. Ou GIP [Glinga numberinthe ourgoing cali. “issed GIP |Caling a number in the missed cal list. Furmber Dial ]Making cl by enteng phone number Operation method of each mode is described below. 3 Exit the dialing method mode Press the [K,.] button. Press the [PLAY MODE] button for at least 1 second. Speed Dialing (Preset Dial) 1 Enter Bluetooth mode Press the [K,.] button. Press the [PLAY MODE] button for at least 1 second. 2 Select the preset dial mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Preset call”. 3 Select the number you want to recall from the memory Turn the [VOL] knob and press it when the desired item is displayed. Select preset number. Phone number is displayed. 4 Exit the preset dial mode Press the [MENU] button. 5 Make a call Press the [VOL] knob. + You need to register the preset dial number. Refer to <Registering to the Preset Dial Number List> (page 27) English | 25

Function of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) Operation of hands-free phoning Calling a Number in the Phone Book 1 Enter Bluetooth mode

Press the [PLAY MODE] button for at least 1 second. 2 Select the Phone Book mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Phonebook". 3 Select the i to be searched for Operation type [Operation Move to the nent character. | Turn the [VOL] Hnob. Move to he next row. Press the [Hé] or pee] button. Determine the selected initial. |Press the [VOL] knob for at least 1 second 4 Select the name Operation type [Operation Move to the next phane un the [VOL knob, number Determine te selected phone |Press the [VOL] kno. number 4 Switching between Display Modes Press the [DISP] button. Pressing this button each time switches between name and telephone number. 5 Make a call Press the [VOL] knob. + During search, a nan-accent character such as"u"is searched for instead of an accent character such as”ü Calling a Number in the Call log 1 Enter Bluetooth mode Press the [K,] button. Press the [PLAY MODE] button for at least 1 second. 2 Select the call log mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Out Call’ (outgoing call), “In Call” {incoming call), or“Missed Call” (missed call). 3 Select a name or phone number Turn the [VOL] knob and press it when the desired item is displayed. / Switching between Display Modes Press the [DISP] button. Pressing this button each time switches between name and telephone number. 4 Make a call Press the [VOL] knob. + The outgoing call list and the incoming call ist, and the missed call list are the lists of calls originated from and received at this unit. They are not the ones stored in the cell phone memory Dial a Number 1 Enter Bluetooth mode Press the [K,.] button. Press the [PLAY MODE] button for at least 1 second. 2 Select the number dial mode Turn the [VOL] knob and press it when the desired item is displayed. Select“Number Dial” 3 Enter a phone number “Operation type Select te numbers Move ta the next digi, Delee the last dit operation lun the [VOL] knob. Press the [B»»1] button. Press the [k@-4] button. + Press the number ([1] - [0]), #([FM]), ([AM)), or +(D-»1]) button on the remote controller. To erase the entered phone number digit by digit: Press the [#4] button on the remote controller. 4 Make a call + Press the [VOL] knob. + Press the [DIRECT] button on the remote controller. + You can input max 32 digits.

26 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Function of KDC-X794/ KDC-MP745U Make a Voice Dialing Call 1 Enter voice recognition mode Press the [VOL] knob for at least 1 second. 2 “PB Name?”is displayed. When a beep is heard, say the name within 2 seconds. 3 "PN Type”is displayed. When à beep is heard, say the category name within 2 seconds. 4 Make a call Press the [VOL] knob. 2 This step is the same as step 4 of the procedure n <Caling à Number in the Phone Book> (page 26). You can make a call or select a category. + Ifyour voice cannot be recognized, a message is displayed. Pressing the [VOL] knob allows you to retry voice input. Refer to <Troubleshooting Guide> (page 74) + Both the name and category require registration of a voice tag. Refer to <Setting a Voice Command for Category> (page 52) + Audio sound is not output during voice recagnition. Registering to the Preset Dial Number List 1 Select the phone number you wish to register Select the phone number with reference to the following - Calling a Number in the Phone Book (page 26) - Calling a Number in the Call log (page 26) 2 Enter Preset Memory mode Press the [VOL] button for at least 2 seconds. 3 Select the Preset number to put in the memory Turn the [VOL] knob and press it for at least 1 second when the desired item is displayed. Select preset number. 4 Determine the Preset number to put in the memory Turn the [VOL] knob and press it when the desired item is displayed. Exit the Preset Memory mode Press the [MENU] button. Display of Phone Number type (category) The category items in the Phone Book are displayed as follows: Information General ONE TES Home EVE] Ofice NONET TT Mobile LS Otner English | 27

Basic Operation Switching display Press the [DISP] button. Mode Display type 5 line display mode Displays 4 to 5 lines often. He display mode Displays 2 to 3 lines often. iPod display [isplys ke iPod, (iPod source on) mode Spectrum anabzer [Displys a ine oftext and te spectrum analyzer. display mode Cock display mode [Displys the clock. + When the S-line display mode is selected, the status (ON/ OFF indicator of each function] can be displayed on the first line, and the icon of the currently selected source and the text information title can be displayed on the left side by the following <Customization of 5-line Display Mode & line Display Mode & iPod-like Display Mode> (page 30) operation. Status display: Sele Sele Side display: Select"Settinc ttings”" >"DISP & ILLUMI > “Display >"Status" s >"DISP & ILLUMI" > “Display Select” >"Side Select” Text scroll Press the [DISP] button for at least 1 second. The displayed text scrolls. Display Setting You can select following Display Setting items. 1 Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. #SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Menu List mode Press the [MENU] button. 3 Enter Display Setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “DISP & ILLUM/". 4 Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed. Display [overviewr Settings” FOIS RUN [Making Display and luminaton settings. FDisply Select” [Selcting and customizing the Display type. FcolorSelec” [Selecting the uminaton Color of the panel Reer to <luminaton Color Selecton> page 32) FDisply Of [this units not operated at least 5 seconds Mode” with OFF" selected, the display tums of. During a setup mode, the display wi not tu ff even 5 seconds laps. l'OFF'/"ON" FDispley— [Reducesthe display Muminaton bigmess. Dimmer” l'Auto” Dims the llumination in conjuncion th te Light switch ofthe vec. Manual” Dis the ilumination constant Manual?" Dis the ilumination daer than Manual. OFF" Does not dim the ilumination Adjusting the display contrast Papi FContrse Sitches the panel display between poste rnegaïve l'POSI"/"POSI2"/"NEGAT"/ *NEGA2" FTEXT Scroll" [Species whether the text is scrolled automatically. l'Auto’ "Manual" P'LLUMI Reduces the key Illumination brightness. Diner is he lumintion in conjuncion with the Light switch of the vehid. l'Manual1”: Dims the illumination constantiy. l'Manual2”: Dims the illumination darker than Manual. J'OFF": Does not dim the illumination.

28 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

FILLDM Efece" [Ses whether the Key lumination bghiness changed in conjunction with the key operation OFF'/"0N" FTLLUME MSC [Sets whether the Key lumination colors

{Factory setting) 5 Make a settin + When the“ on is displayed (at the right edge of the display) Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. + When the ‘| on is not displayed Press the [-@-4] or [#1] button to select a setting value. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. English | 29

• Information of Radio text plus is displayed

Display Settings Customization of Spectrum Analyzer Function of KDC-X994 Display Mode Illumination Color Selection You can customize the display of the Spectrum Selecting the Illumination Color of the panel. analyzer display mode. 1 Enter Menu List mode Select the source Press the [SRC] button. Turn the [VOL] knob and 2 press it when the desired item is displayed. 22 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.

Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed.

Make a setting Press the [-@-4] or [æ1] button. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly.

Press the [MENU] button. Enter Illumination color selection mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “DISP & ILLUMI” > “Color Select”. Select the place where you want to set the Illumination Color Turn the [VOL] knob and press it when the desired item is displayed. Place Display Display and key a Display Display Key Key Select the Illumination Color Turn the [VOL] knob and press it when the desired item is displayed. Select the color from “Variable Scan'/"Colorl" — “Color 10°/*User Creating “User” color You can create your original color during the selection from “Colort" —“Colort0 The color you created can be called when you select User’ . Press the [VOL] knob for at least 1 second. Enter the detail color adjustment mode. Set the color.

- Press the [VOL] knob. xit the detail color adjustment mode. Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly.

Auxiliary Input Display Setting Selecting the display when changing to Auxiliary input source. 1 Select the AUX source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the*AUX' display. A SRC Select mode 2: Pressing the [SRC] button repeatedly switches source 2 Enter Menu List mode Press the [MENU] button. 3 Enter Auxiliary input display setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “AUX Name Set”. 4 Select the Auxiliary input display Turn the [VOL] knob. Select*AUX: "DVD! "PORTABLE" "GAME" "VIDEO! or “v" 5 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. + The Auxliary input display can be set only when the buil-in auxliary input or the auxilary input of optional KCA-5220A is used. On the KCA-5220A, "AUX EXT"is displayed by default + AUX source is initially set to "OFF" Before display setting, set’Buit in AUX" described in <initial Settings> (page 34) toON' English | 33

Clock and Other Functions Release MENU VOL Clock and Date Adjustment You can adjust the clock and date. [Overview Clock & Date” lock Adjust” Sets the lock Pme Synchonied" |Synchroniang the RDS station time KDC-X794 anly) data and this units clock. (KDC-X994/

3. Turn the [VOL] knob to adjust the month.

4. Press the [æ»1] button.

5. Turn the [VOL] knob to adjust the day.

6. Press the [VOL] knob.

Enter Date format mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Date Mode Select’. Select Date format Turn the [VOL] knob and press it when the desired item is displayed. Select from 7 types. Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. 1 Enter Menu List mode Press the [MENU] button. 2 Select RDS's automatic time adjustment {KDC-X994/ KDC-X794 only) Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “Clock & Date” > “Time Synchronize” > “ON or "OFF". When selected'OFF" proceed to step 3 When selected'ON" proceed to step 5 3 Enter Clock adjustment mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “Clock & Date” > “Clock Adjust”. 4 Adjusting Clock

1. Turn the [VOL] knob to set the hours.

2. Press the [»-»1] button.

3. Turn the [VOL] knob to set the minutes.

Enter Date adjustment mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Date Adjust". 6 Adjusting Date

1. Turn the [VOL] knob to adjust the year.

MOF'/'ON" Initial Settings Date Adjusr Sets the date You can select following Initial Setting items. Fate Mode de [ete te dspay mode 1 Select the Standby Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the*STANDBY" display. #1 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. Enter Menu List mode Press the [MENU] button. Enter Initial Setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Initial Settings”. Select the setting item to adjust Turn the [VOL] knob. Display Overview Initial Setngs FSRCSelect” [Sets ie source selection method, Settings 1°/*2" FBeep Setng te operation check sound [beep sound) ONOF: OFF'/ ON" FMenu Language” |You can select te display language forte Menu listitem, 'English"/"Français"/ Español"

But AUX [Whenthis is setto ON, AUX source can be selected. ON”: Allons AUX source ta be selected. Use his setting when the buit-in AUX terminal i connected t the external equipment all the time. OFF" Disable AUX source selection Use this seing ven the buit-in AUX terminal is not used Sets the method for reading CD Settings 1” Automatic cistinguishes between auch fle dis and music CD when plajing disc. Settings 2: Forces playing as must CD. Deletes Favorite Preset Memory. Refer to <Favarte Preset Memory Delete> page 46) Forced CD-DA Favorite Delete” Demonstration mode Setting Turning the demonstration mode ON/OFF. 1 Enter Menu List mode Press the [MENU] button. 2 Enter Demonstration mode setting Turn the [VOL] knob and press it when the desired item is displayed. Select "DEMO Mode". 3 Set the Demonstration mode Turn the [VOL] knob and press it when the desired item is displayed. Select “ON or “OFF”. 4 Exit Menu List mode But AN [Selecing OFF uns of Bu ample. Turning dtebuen amplifier impros the Press the [MENU] button. qualit ft sound om Preut. OFF" Function of KDC-X794/ KDC-MP745U Dr DS DsabeéSysen neuT a teuntE … Muting volume upon reception of Mihen the Bceplate is removed LOFF"/"ON Phone call {Factory setting) 5 Make a setti + When the“ icon is displayed (at the right edge of the display) Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. + When the” icon is not displayed Press the [#4] or [æ-»1] button to select a setting value. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. The audio system automatically mutes when a call comes in. When a call comes in “CALL'is displayed The audio system pauses Listening to the audio during a call Press the [SRC] button. The“CALL'display disappears and the audio system comes back ON. When the call ends Hang up the phone. The*CALL'display disappears and the audio system comes back ON + To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone ssory. Refer to <Connecting Wires to Terminals> (page English | 35

Clock and Other Functions Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button. Drop open the faceplate 2 Drawing the faceplate to left side pull it to forward and remove it. + The faceplate is a precision piece of equipment and can be damaged by shocks or joits. + Keep the faceplate in its faceplate case while detached. + Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing, Reattaching the Faceplate 3 Align the shaft on the unit with the depression on the faceplate. 4 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit

Zone Sets the Dual Zone System. Fione Sale” |- Dual Zone System (page 40) Audio Control You can adjust following Audio Setting items. Display [overview “SubWocferLewel | Vou can setsubwooferlevel 15" — "0 — "#15" DSP Se FBypass” Disables the DSP function Through": Enables ne DSP function. FEqualrer Sesthe sound qualit. L Preset Équalier cure Select (page 39). Manual quañizer Control (page 39). Pass Boost” Sets the Bass Boost level in to steps. MOFF"/"Stepl" "2" THIGHWAESOUNDE | |Compensates the low volume or bas sound being lost y road noiss to make vocal sound ear. L'OFF'/"Stept"/"2/"3" “Supreme” ums ONVOFF the Supreme plus function. an be set while Music CD source, Audio fle Source of USB and iPod source L'ON°/"OFF" “Postion” Compensates te sound emdonmentin accordance with the listening postion Listening Postion Selection (page 40). Listening Postion Fine Adjustments (page “Balance” gust Teri speaker balance. KLeft}"LI5"— "0" —"R1S" (Right) Rad” just rontrear speaker balance. Rear)"R1"5 — "0" —"F15" (Front) “Zone Rear Volume” |Referto <Dual Zone System> (page 40). Sub” ums on/of he subwoofer output L'ON'/'OFF" Detail Setup” Faripe a get dear sound, setthe sound environment Fpealer according to the location and size of physicaly Grp se isa speakers th reference to the EvDier folowings Carpe Selection (page 42. L Speaker Seting (page 42. L Grtpe Fine Adjustments (page 43). Over Seting (page 44). Volume ofget” [Sets each sources volume s a difference from he basic volume. 8" — "20" (AU "-8"—"+8") Fret” Sets the audio reset Audio Preset Memory (page 4). Audio PrsetRecal (page 45). (__:Factory setting) Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than "STANDBY" #SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.

Enter Audio Control mode Press the [VOL] knob. 3 Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed. 4 Make a setting Press the [4-4] or [æ»1] button to select a setting value, and then press the [VOL] knob. 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. Remarks + DSP Set When “DSP Set'is set to"BYPASS; the DSP function is disabled , and the colored items can not be set + HIGHWAY-SOUND Increases the volume of faintest sound being lost by road noises to make the sound more audible. Additional, it accentuates bass sound being lost by road noises to make the bass sound more dynamic. + Supreme+ (Supreme Plus) Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding. The bass and vocal sound that are cut off by encoding are supplemented for the reproduction of natural sound quality. Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range: The bass and vocal sound of Music CD/ iPod is also supplemented + Dual Zone System Main source and sub source (Auxlliary input) output Front channel and Rear channel separately. 38 | KDC-x994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

Preset Equalizer curve Select Manual Equalizer Control You can select following Equalizer curve. You can adjust following Equalizer Control items. Display Equalizer cure KDC-X994/ KDC-X794 “Natura” Natural Band Item Range User BANDT (62.54) ['GAIN Band eur 9-08 Ro FER Bass Efect û Fops BANDZ 0250 1) ['GAN Band eur +008 Easy BAND (TK) [GANT Band +908 Top 40 BAND (EH) [GANT Band +908 az BANDE" (TE KHz)— ['GAN Band ever H=+908 Game (Factory setting) iPod (During Pod source on) KDC-BT945U/ KDC-MP745U

• The Equalizer curve set in the section <Manual Equalizer Band Item FTD Control is recalles {Factory setting) BANDT" (807 1007 ['GAIN Band eve F9 +908 — pe 160/250/ 400 Ha) FO" Qualty 0257057 10 Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select à source other than"STANDEY" 22 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source

Enter Audio Control mode Press the [VOL] knob. 3 Enter Preset Equalizer mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Equalizer” > “Preset Equalizer". 4 Select the Equalizer curve Press the [-@-4] or [1] button. 2 Select the iPod Equalizer curve You can select from 22 Equalizer curve types for iPod when ‘iPod”is selected.

1. Enter iPod Equalizer mode

Press the [VOL] knob.

2. Select the iPod Equalizer curve

Press the [Hd] or [B-B-1] button and press it when the desired item is displayed. 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. + You can select for each source. BANDZ (6307 1K7 1L6k/ 2.5k Hz) L'GAIN" Band level FT Quality +548

BAND (AK 6.3k7 10k/ 16k kHz) L'GAIN" Band level FT Quality (L :Factory setting) 1 Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than "STANDBY" #SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Audio Control mode Press the [VOL] knob. 3 Enter Manual Equalizer Control mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Equalizer” > “Manual Equalizer”. 4 Select the item you want to set [Operation Turn the [VOL] knob, Press the [He] or [pi] button. Press he [VOL] button Operation type Select the tem. Ajust each tem Setthe value 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. Mhen“iPod”is selected in the section <Preset Equalizer curve Select> (page 39), Manual Equalizer Control is disabled. + You can select for each source. English | 39

Audio Adjustments Listening Position Selection The sound environment can be compensated in accordance with the selected position. According to 4 Select the speaker you want to set Turn the [VOL] knob and press it when the desired value is displayed. the listening position, select the position from the Den Een following settings. FRONTAL Front Lef speaker FRONT PR" Front Right speaker Compensation seat REAR"/'L" Rear Left speaker Not compensating, REAR LR [Rear Right speaker Front-Left set SUBVOOFER 7€ [Subnoofer Left Front-Rigt seat SUBWOOFER A [Submoofer Right Front seat Initiale te seing values CL: Factory setting) Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than"STANDBY" 22 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.

Enter Audio Control mode Press the [VOL] knob. 3 Enter Preset position setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Position” > “Preset Position”. 4 Select the seat you want to compensate Press the [-@-4] or [æ1] button. 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. Function of KDC-X994/ KDC-X794 Listening Position Fine Adjustments Making fine adjustment of the value specified at Preset position selection per speaker. Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than"STANDBY" 22 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.

Enter Manual position setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Position” > “DTA.

Set the value Press the [4-4] or [b-»1] button. Adjust between O and 5.58 feet. Press the [VOL] knob for at least 1 second if you want to execute the‘INITIAL' 6 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. Display ‘210ne Rear Volume"* me of Rear channel Detaed Setup” Fine Sets te Dual Zone System. OFF"/"ON" Species the destination ofsub source sound en the Dual Zone function is turned on. l'Rear'/"Front" F'Hone Select" *The Dual Zone System is set to "ON" {__: Factory setting) Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than "STANDBY" #SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Audio Control mode Press the [VOL] knob. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Detailed Setup”. 4 Select the item you want to set Turn the [VOL] knob and press it when the

40 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

desired item is displayed. 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. + Select Main source by [SAC] button + Adjust the volume of Front channel by [VOL] knob. + The Audio Control has no effect on sub source. + There are following limitations when Dual Zone System is enabled. There is no output from the subwoofer. “Fader!"Subwoofer Level" of <Audio Control> (page 38) and DSP function are not available: + The Bluetooth audio source can be set exclusively to the front speaker. Set"2Zone Select" to'Rear! English | 41

Speaker Setting The speaker X'Over is automatically set when the position and size of each speaker are selected from the following items. Speaker [Item Range FRONT SA" [SpeakerSwerront KDC-K994/ KDC-794 OEM: "inch" "Sinch!"6 1/2inch! “63/#inch°"7inch! "46,57" "68, Car Type Selection

KDC-B1945L/ KDC-MP7SU

You can compensate the delay of the sound arrival “Small! Medium', “Large” time by selecting your environment from the TOGO [Speaker Location Front following car types. l'Door” “On Dash’ “Under Dash" y EE TWETER "0" It compensaing DT TE “Conpa Compact car “ul se ar ul se car Staon wagon M6 122inch° "6 3/Ainch“Zinch "4x6", Jimian FT, "GE" 60, 7x0" sv Sport-uiltyvehide KOC-BTSASU/KDCMP7ASUE Finivan Long} [Long Minivn one! "Small!-Mediun Large’ Pa eme ve) LOCATION” [Speaker Location Fear — “Door: "Rear Deck” 1 Select the source "2nd Row’, "3rd Row” (Car Type: Press the [SRC] button. Turn the [VOL] knob and Minivan® "Minivan (Long)") press it when the desired item is displayed. SUBWT PSE Speaker Size Subwoofer Select a source other than “STANDBY" KDC-ASS4/ RDC . 4 SRC Select mode 2: Pressing the [SRC] button ones ind" Binc, ind, d l2inch"15inch Over” repeatediy switches source. C-BI94SU/ KDC-MP745U 2 Enter Audio Control mode one "Small "Large Press the [VOL] knob. 3 Enter Cabin select mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Detailed Setup” > “Car Type". 4 Select the car type Press the [-@-4] or [æ1] button. 5 Set the value Press the [VOL] button. 6 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. + You can compensate the distances in more details by using <Car Type Fine Adjustments> (page 43) function. ( : Factory setting) 1 Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than "STANDBY" #SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Audio Control mode Press the [VOL] knob. 3 Enter Speaker setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Detailed Setup” > “Speaker”. 4 Select the item you want to set [Operation Turn the [VOL] knob, Press the [He] or [pi] button. Press he [VOL] button Operation type Select the tem. Ajust each tem Setthe

42 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. Car Type Fine Adjustments Adjusting fine tuning of the speaker position compensation value specified at <Car Type Selection> (page 42). Item Range Front speaker (0 1444 feet Fear speaker (0 — 144 feet Subnoofer (0 1444 feet {Factory setting) Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than"STANDBY" A SRC Select mode 2: Pressing the [SRC] button repeatedly switches source 2 Enter Audio Control mode Press the [VOL] knob. 3 Enter Car Type Adjustment mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Detailed Setup” > “Car Type Adjust”. 4 Select the item you want to set Operation type Select the tem. Ajust each tem. Setthe value [operation um the [VOL] knob. Press the [He] or [pi] button. Press the [VOL] button. The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior. 1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior. 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance difference in accordance with the farthest speaker. Reference point 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. English | 43

DSP Setup X'Over Setting Fine adjusting the following setting values corresponding to the X'Over values set in the section <Speaker Setting> (page 42). Display tem [Range Font | Front High Pass Filter Through, 30°, 40, 50*, 60, 70, 80, (90, 100, 120, 150, 180, 220, 250* Hz) PSLOPE" [Front High Pass Slope 6, 12, -18, -24 dB/Oct Fear JC [Rearignpasstiter Through, 30°, 40, 50°, 60,70, 80, 0°, 100, 120, 150, 160, 220, 250* Hz) Rear High Pass Slope 6, 12, -18,-24 dB/Oct Subwoofer Low Pass Fiter 30°, 40, 50°, 60, 70, 80, 90°, 100, 20, 150, 160, 220, 250*, Through Hz) PSLOPE" FSubNoofer FC PSLOPE" [Subwoofer Slope 6, 12, -18, -24 dB/Oct PHASE" [Subwoofer Phase Reverse (180°)/ Normal (0°) (_L Factory setting)

• Function of KDC-X994/ KDC-X794 Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than STANDEY #3 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Audio Control mode Press the [VOL] knob. 3 Enter X'Over setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Detailed Setup” > “X'Over". 4 Select the speaker you want to set Turn the [VOL] knob and press it when the desired item is displayed. Select “Front”, “Rear’, or“SubWoofer”. 5 Select the item you want to set Operation type Select te tem. Ajust each em. Setthe value [Operation Turn the [VOL] Knob. Press the [Ha] or [>] button. Press the [VOL] button 6 Repeat steps 3 to 4 to complete the X'Over settings. 7 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. Audio Preset Memory Registering the value setup by Sound Control. 1 Setup Sound Control Refer to the following operations to setup the Sound Control - Car Type Selection (page 42) - Speaker Setting (page 42) - Car Type Fine Adjustments (page 43) - XOver Setting (page 44) - Manual Equalizer Control (page 39) - Listening Position Selection (page 40) - Listening Position Fine Adjustments (page 40) 2 Enter Audio preset memory mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Detailed Setup” > “Preset” > “Memory”. 3 Select the number to put in the memory Turn the [VOL] knob and press it when the desired item is displayed. Select a preset number. 4 Turn the [VOL] knob and press it when the desired item is displayed. Select “VES". “Memory Completed"is displayed! 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. + Register 6 patterns of Audio Preset Memory. + Preset number"1" When you press the Reset, all the sources will be the setting value which is registered + Preset number"1 and "2" The memory cannot be erased by the Reset button. + This function cannot be registered when the iPod Equalier set in <Preset Equalizer curve Select> (page 39)

44 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Audio Preset Recall Recalling the sound setup registered by <Audio Preset Memory> (page 44). 1 Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than"STANDBY" A SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Audio preset recall mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Detailed Setup” > “Preset” > “Recall". 3 Select the number to recall in the memory Turn the [VOL] knob and press it when the desired item is displayed. Select preset number. 4 Turn the [VOL] knob and press it when the desired item is displayed. Select "YES". "Recall Completed"is displayed 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. + The‘User” of <Preset Equalizer curve Select> (page 39) is changed ta the value which was recalled + The Equalizer curve is changed to the value which recalled by the selected source. nas English | 45

Favorite Control MENU VOL

+ Hfthe contents in iPod are changed after the FAVORITE registration, the list registered in this unit becomes different from that in iPod. In this case, perform the FAVORITE registration again. Favorite Preset Recall FAV Favorite Preset Memory Registering the operation procedure to select your favorite broadcast station or iPod Playlists/ Artists, etc. 1 Display a favorite item Source Registerable items TUNER/SIRIUS/XM/HD [Frequency or channel iPod [Search item such as Playlists/ Artists/ Albums, etc. Menu ist Setüng [Menu ist Serting tem Audio control Audio control tem Telephone number retreval Hands-ree phone displayed when the operation procedure can be registered iPod setting The desired list in the first hierarchy can be registered Tst erarchy 2nd hierarchy À 3rd hierarchy iPod LEarmsrs 2 Enter Favorite Preset Memory mode Press the [FAV] button for at least 1 second. 3 Select the number to put in the memory Turn the [VOL] knob. 4 Put the Favorite Preset in the memory Press the [VOL] knob. Cancelling the Favorite Preset Memory mode Press the [FAV] button. + Registering the operation procedure to an existing preset number overwrites the existing procedure + Register 6 of Favorite Preset Memory: The memory cannot be erased by the Reset button Retrieving an item registered to Favorite. 1 Enter Favorite Preset Recall mode Press the [FAV] button. 2 Select the number to recall in the Favorite memory Turn the [VOL] knob and press it when the desired item is displayed. Select preset number. Cancelling the Favorite Preset Recall mode Press the [FAV] button. + When iPod is selected for the source, the list selection screen for Playlists/ Artists/ Albums, et. is displayed Sangs will not be automatically played Favorite Preset Memory Delete Deleting an item registered to Favorite. Select the Standby Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the*STANDBY" display. #SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Menu List mode Press the [MENU] button. 3 Enter Favorite Preset Memory Delete mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Initial Settings” > “Favorite Delete". 4 Enter Favorite Preset Memory Delete mode Press the [VOL] knob. 5 Select the number you want to delete Turn the [VOL] knob and press it when the desired item is displayed. Select preset number. “Delete?"‘is displayed. Select"ALL'if you want to delete all 6 Turn the [VOL] knob and press it when the desired item is displayed.

46 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Select "YES". “Completed"is displayed! Exit Favorite Preset Memory Delete mode English | 47

Bluetooth Setting You can select following Bluetooth Setting items. Enter Bluetooth mode Press the [K,] button. Press the [PLAY MODE] button for at least 1 second. A You can also select from “Settings" in Menu List mode. 2 Turn the [VOL] knob and press it when the desired item is displayed. Select “BT Settings”. 3 Select the Menu item Turn the [VOL] knob and press it when the desired item is displayed. PPIN Code Edit” [Specfy the PIN code required when registeing his uit using tre Bluetooth device. Referto <Registering PIN Code> (page 50). FAnsuer ll automatically afrertapse ofthe preset time interval for automatic answer. OFF" /"Os" "85" "99s" Fuetooth HF} |Vou can specf output speakers for hands free Audio Noïce communication and Bluetooth audio sound FRONT" speakers. ALL: Output vice rom the front andrear speakers. Nou can output a beep from the speaker en à call comes. ON": Beep is heard OFF": Beep is cancel PBTIW Update” | Display the version ofthe fmviare of this unit Pic Gain" |Adjustthe sens ofthe microphone for à elephone call. Adjust the voice of call. Setting fo +'icreases the vaice volume. DES Reduce te naiss genereted by surounding environment without changing the microphone Nolume. Adjustthe voice fcller when itis nat clear. Setting to" "increases the noise reduction

Display [overview *BTSettings” Phone Selection [Select cll-phone or Bluetooth audio player Audio Selection” [connection Refer to <Selecting the Bluetooth device You Mish to Connect> (page 50) SUS Download" [Dounload a short message Refer to <Downloading the SMS> (page 54) SUSInbor [Display te received short message. Refer to <SAS (Short Message Service) > page 54) Voice eg" Register voice for voice recognition and voice to select ihe Phone number category in Phone book. Adding a Voice Diaing Command (page 52) Setig a Voice Command for Category (page 52) Detaled Setup” [Move to detailed tem. Device Regis” |Register a Bluetooth device (parng). SPCLDNC——Referto <Registeng Bluetooth deice> Select” page 49) Device Dale” |Cancel registration fe Bluetooth device. Refer to <Deleting a Registered Bluetooth device> (page 51). (__:Factory setting)

• Function of KDC-X994/ KDC-BT94SU 4 Make a setting + When the“ icon is displayed (at the ight edge of the display) Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. + When the“ icon is not displayed Press the [4-4] or [»»1] button to select a setting value. 5 Exit BT Settings mode Press the [RQ] button. Press the [PLAY MODE] button for at least 1 second. Remarks + “Auto Answer” (Setting the Time Interval for Automatic Answer) This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. "OFF": Does not answer the phone call automatically *0": Automatically answers the phone cal at once.

48 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

“1899”: Automatically answers the phone call after lapse of 1 - 99 seconds. + Hfthe time set in the cell-phone is shorter than that set in the unit, the former will be used. + This function does not work for call waiting, + Bluetooth HF/Audio” (Setting up the Voice Output Speakers) Select the speaker which is further from the microphone in order to prevent howling or echoes. + BT F/W Update” (Displaying the Firmware Version) Display the version of the firmware of this unit For how to update the firmware, access our web site. http/wwwkenwood.com/cs/ce/bt/ Registering Bluetooth device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from this unit 1 Enter Bluetooth mode Press the [K.] button. Press the [PLAY MODE] button for at least 1 second. 4 You can also select from “Settings” in Menu List mode 2 Enter Bluetooth device registration mode Turn the [VOL] knob and press it when the desired item is displayed. Select "BT Settings” > “Detailed Setup” > “Device Regist!! Search for the Bluetooth device. When search is completed,‘Finished"is displayed 3 Select a Bluetooth device Turn the [VOL] knob and press it when the desired item is displayed. 4 “Paring”is displayed (except KCA-BT200) IFPairing Success'is displayed, proceed to step 7. IF'PIN Code NG'is displayed, proceed to steps 5 t06. 5 Input the PIN code Operation type Operation Select the numbers un the [VOL Knob. Move to the next digi…— |Press te Dep] button. Delete the astdig. Press te [RQ uton. 6 Transmit the PIN code Press the [VOL] knob for at least 1 second. IF‘Pairing Success'is displayed, registration is completed #1f the error message appears even though the PIN code is correct, try <Registering Special Bluetooth device> 7 Return to the device list Press the [MENU] button. 8 Exit BT Settings mode Press the [K,] button. Press the [PLAY MODE] button for at least 1 second. + This unit allows up to eight digits to be input for a PIN code. Fa PIN code cannot be input from this unit, it can be input from the Bluetooth device: + Hfthere are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. Registering Special Bluetooth device Allawe registration of a special device that cannot be registered normally (pairing)

1. Select Special device registration mode

Turn the [VOL] knob and press it when the desired item is displayed. Select'BT Settings” >‘Detailed Setup” >"SPCL DVC Select

2. Enter Special device registration mode

Press the [VOL] knob for at least 1 second A list is displayed.

3. Select a device name

Turn the [VOL] knob and push the center when the desired device name is displayed. F“Completed"is displayed, registration is completed

4. Go through the procedure step 3 of

<Registering from this unit> and complete the registration (pairing). Cancelling Special device registration mode Press the [MENU] button for at least 1 second. + Ifthe device name is not in the list, select"Other Phones” English | 49

Function of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) Bluetooth Setup Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 Enter Bluetooth mode Press the [K,] button. Press the [PLAY MODE] button for at least 1 second. A You can also select from “Settings" in Menu List mode. 2 Enter PIN code edit mode Turn the [VOL] knob and press it when the desired item is displayed. Select "BT Settings” > “Detailed Setup” > “PIN Code Edit” The current setting of PIN code is displayed 3 Input the PIN code Operation type Operation Select the numbers. Tum the [VOL] knob. Move to he nent gi. [Press the D] button. Delete the last digi. Press the {4 button. 4 Register a PIN code Press the [VOL] knob for at least 1 second. IF°Completed"is displayed, registration is completed 5 Exit BT Settings mode COST COISEZEU Press the [K,,] button.

KDC-X794 [KDC-MP745U

Press the [PLAY MODE] button for at least 1 second. s specified + APIN code can be specified with up to eight chi Selecting the Bluetooth device You Wish to Connect When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use. 1 Enter Bluetooth mode Press the [K,.] button. Press the [PLAY MODE] button for at least 1 second. #1 You can also select from “Settings” in Menu List mode.

Select Bluetooth device selection mode Turn the [VOL] knob and press it when the desired item is displayed. Cell-phone Select “BT Settings” > “Phone Selection”. Audio player Select “BT Settings” > “Audio Selection”.

Enter Bluetooth device selection mode Press the [VOL] knob for at least 1 second. “(name)'is displayed 4 Select the Bluetooth device Turn the [VOL] knob.

Set up the Bluetooth device Press the [4-4] or [»->1] button. “k(name)"or“-{name)"is displayed “#": The selected Bluetooth device is busy. The selected Bluetooth device is on standby. blank): The Bluetooth device is deselected. 6 Exit BT Settings mode Press the [K.] button. Press the [PLAY MODE] button for at least 1 second. - Ia Bluetooth device is already selected, deselect it, and then select a different one. + you cannot select a device using the audio player, connect the device with the audio player.

50 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Deleting a Registered Bluetooth device You can delete a registered Bluetooth device. 1 Enter Bluetooth mode Press the [K,.] button. Press the [PLAY MODE] button for at least 1 second. A You can also select from “Settings" in Menu List mode. 2 Enter Bluetooth device deletion mode Turn the [VOL] knob and press it when the desired item is displayed. Select "BT Settings” > “Detailed Setup” > “Device Delete". “(name)” is displayed 3 Select the Bluetooth device Turn the [VOL] knob. 4 Delete the selected Bluetooth device Press the [VOL] knob. 5 Turn the [VOL] knob and press it when the desired item is displayed. Select "VES". “Delete"is displayed. 6 Exit BT Settings mode Press the [K,] button. Press the [PLAY MODE] button for at least 1 second. hen a registered cell-phone is deleted, its Phone Book, log, SMS, and voice tag are also deleted Downloading the Phone Book Download the phone book data from the cell- phone to this unit so that you can use the Phone Book of this unit. To download automatically fthe cell-phone supports à phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection. + Setting on the cell-phone may be required + Ifno phone book data is found in the unit even after the compet display, your cell-phone may not support automatic download of phone book data, In this case, try downloading manual To download from the cell-phone manually 1 By operating the cell-phone, end the hands-free connection. 2 By operating the cell-phone, send the phone book data to this unit By operating the cell-phone, download the phone book data to this unit. + During downloading “Downloading'is displayed. + After completion of downloading “Completed”is displayed. 3 By operating the cell-phone, start the hands- free connection. To clear the downloading completion message Press any button. + Up to 1000 phone numbers can be registered for each registered cell-phone. + Up to 32 digits can be registered for each phone number along with up to 50° characters representing a name. € 50: Number of alphabetic alphabetical characters. Fewer characters can be input depending on the type of characters) + To cancel downloading of the phone book data, operate the cell-phone English | 51

Function of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) Bluetooth Setup Function of KDC-X794/KDC-MP745U Adding a Voice Dialing Command Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. 1 Enter Bluetooth mode Press the [PLAY MODE] button for at least 1 second. 4 You can also select from “Settings" in Menu List mode

Enter Phone book name edit mode Turn the [VOL] knob and press it when the desire item is displayed. Select “BT Settings” > “Voice Tag” > “PB Name Edit”

Search for the name to register Select the name to register with reference to 4 in <Calling a Number in the Phone Book> (page 26). Ifa voice tag has already been registered for a name, ‘is displayed before the name.

Select a mode Turn the [VOL] knob. Display Operation PB Name Regist Register a vice tag FPE Name Check” Pay a voice tag FPE Name Delee"® Delete a voice tag Retum Retum to step 2. Displayed ani when a name for which a voice tag has been registered is selected Select “PB Name Regist” (Regist) 5 Register a voice tag (first) "Enter Voice 1”is displayed. When a beep is heard, say a voice tag within 2 seconds. 6 Confirm the voice tag (second) "Enter Voice 2'is displayed. When a beep is heard, say the same voice tag as that you said in step 6 within 2 seconds. "Completed"is displayed. 7 End registration Press the [VOL] knob. Return to step 2. You can register another voice tag continuously. + Ifyour voice cannot be recognized, à message is displayed. Pressing the [VOL] knob allows you to retry voice input. (page 52) Select “PB Name Check” (Play) 5 Press the [VOL] knob. Play the registered voice and return to step 2. Select “PB Name Delete” (Delete) 5 Delete a voice tag Press the [VOL] knob. 6 Turn the [VOL] knob to select “YES’, and then press the [VOL] knob. Exit BT Settings mode Press the [PLAY MODE] button for at least 1 second. + Audio sound is not output during voice tag registration. Function of KDC-X794/KDC-MP745U Setting a Voice Command for Category Add a voice tag to the phone number category {type) for voice calling. Enter Bluetooth mode Press the [PLAY MODE] button for at least 1 second. A: You can also select from “Settings' in Menu List mode

Enter Phone Number type edit mode Turn the [VOL] knob and press it when the desired item is displayed. Select "BT Settings” > “Voice Tag” > “PN Type Edit"

Select the category (type) you wish to set Turn the [VOL] knob and press it when the desired item is displayed. Select “General”, Home’, “Office”, ‘Mobile’, or “Other” 4 Select a mode Turn the [VOL] knob. Display [Operation PA pe Regis” Register a vice tag PA pe Check" Pay voice tag PA pe Delee” Delte a voice tag Retum Return to step 2. + Displayed only when a name for which a voice tag has been registered is selected. 5 Register the category (type) by performing steps 5 to 7 in <Adding a Voice Dialing Command> (page 52).

52 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

6 Exit BT Settings mode Press the [PLAY MODE] button for at least 1 second. + Set the voice tag for all the 5 categories. the voice tag is not registered for all the categories, the Phone book may not be recalled by voice command. English | 53

Function of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) SMS (Short Message Service) Downloading the SMS SMS (Short Message Service) Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. 1 Enter Bluetooth mode Press the [K,] button. Press the [PLAY MODE] button for at least 1 second. 2 You can also select from Settings" in Menu List mode 2 Enter SMS download mode Turn the [VOL] knob and press it when the desired item is displayed. Select "BT Settings” > “SMS Download". 3 Start downloading Press the [VOL] knob. “Downloading'is displayed. When the downloading finishes,"Completed"is displayed. 4 Exit BT Settings mode Press the [K.] button. Press the [PLAY MODE] button for at least 1 second. + The cell-phone must be able to transmit the SMS using Bluetooth. Setting on the cell-phone may be required the cel-phone does not support SMS function, the download item in Function Control mode is not displayed + When the SMS is downloaded from the cell-phone, the unopened messages in the cell-phone are opened + The already-read and unread short messages can be respectively downloaded up ta 75 The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. . vent car accidents, the driver should not read the while driving. When a new message arrives “SMS Received"is displayed The display disappears with any operations. Displaying the SMS 1 Enter Bluetooth mode Press the [A] button. Press the [PLAY MODE] button for at least 1 second. #1 You can also select from “Settings” in Menu List mode.

Enter SMS Inbox mode Turn the [VOL] knob and press it when the desired item is displayed. Select “BT Settings” > “SMS Inbox". A message list appears.

Select a message Turn the [VOL] knob. Each pressing of the [DISP] button switches between telephone number or name and message reception date 4 Display the text Press the [VOL] knob. Turning the [VOL] knob scrolls the message Pressing the [VOL] knob again returns to the message list screen. 5 Exit SMS Inbox mode Press the [MENU] button. 6 Exit BT Settings mode Press the [K, ] button. Press the [PLAY MODE] button for at least 1 second. + The unopened message is displayed at the beginning ofthe list. Other messages are displayed in the order of reception The SMS that has arrived when the cell-phone is not

54 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

linked with Bluetooth cannot be displayed. Download the SMS. + The short message cannot be displayed during downloading the SMS. English | 55

Hd« pi Basic Operation Selecting Satellite Radio source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the*SAT:"SIRIUS’ or"XM' display. 22 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. + You need to register to the service provider to receive the service by Satellite Radio. Consu provider if"CALL .… TO SUBSCRIBE" appears. The radio may take a little time to start receiving after you select the Satellite Radio source. + Ifthe signal reception fall, Acquiring Signal”/*No Signal appears. e sen Selecting the channel Press the [-@-4] or [æ1] button. Selecting the Preset Band

desired item is displayed. Select “SR1,“SR2’, “SR3” or “SR4". (SIRIUS/ SAT) Select *XM1° “XM2’ ‘XM3” or “XM4" (XM) Satellite Radio Setting You can select following Satellite Radio Setting items. 1 Select Satellite Radio source 2 Enter Menu List mode Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”. 4 Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed. Display Selectable setting/item Setings” FSeek Mode" [Select the tuning mode ofthe radio Normal manual seeking control. reset" Search in order fthe channels in he Preset memory PEN Displys the Electronic Sera Number ofsatlite radio. L'ESN=" (Factory setting) 5 Make a setting Press the [4-4] or [b-»1] button. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. Category and Channel Search Selecting the channel and category you want to receive. 1 Select Satellite Radio source 2 Enter Menu List mode Press the [MENU] button. 3 Enter Category and Channel Search mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Channel Search". 4 Select the Category Turn the [VOL] knob to select Category, and then press the [VOL] knob. 5 Select the Channel Turn the [VOL] knob to select Channel, and then press the [VOL] knob. Cancelling Category and Channel Search mode

56 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

Press the [MENU] button for at least 1 second, and then press it again briefly. + You cannot Channel search until the category formation is acquired Preset Memory Putting the channel in the memory. Select the channel you wish to store in the preset memory

Enter Preset Memory mode Turn the [VOL] knob and press it when the desired item is displayed. Select “List & Memory”.

Select the number to put in the memory Turn the [VOL] knob and press [VOL] knob for at least 2 seconds when the desired item is displayed. Select preset number. Cancelling the Preset Memory mode Press the [MENU] button for at least 1 second, and then press it again briefly. + Onlythe channel number is stored. Category information not stored. Preset Tuning Recalling the channels in the memory. 1 Select Satellite Radio source 2 Enter Menu List mode Press the [MENU] button. 3 Select a desired station in the memory Turn the [VOL] knob and press it when the desired item is displayed. Select “List & Memory” > Preset number. Channel Scan Every receivable Channel is checked for 10 seconds. 1 Select Satellite Radio source 2 Enter Menu List mode Press the [MENU] button. 3 Enter Channel Scan Turn the [VOL] knob and press it when the desired item is displayed. Select “Channel Scan”. 4 Start Channel Scan Turn the [VOL] knob and press it when the desired item is displayed. Select “YES". 5 Release it when the channel you want to listen to is received Press the [VOL] knob. Function of remote control Direct Access Tuning Entering the channel and tuning. 1 Select Satellite Radio source 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. “is displayed 3 Enter the channel Press the number buttons. 4 Tune in to the entered channel Press the [#4] or [wi] button. Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. + you make no button operation for 10 secands, the Dire ss Tuning mode is automatically canceled. + you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, “Acquiring Signal”/ “No Signal” appears. English | 57

Basic Operation Selecting HD Radio source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the ‘HD RADIO" display. 4 SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. Selecting the Receiving Band

Press the [MENU] button.

desired item is displayed. Select “FM1” “FM2' “FM3"or“AM". Selecting the Receiving station Press the [+4] or [#1] button. During reception of stereo stations the “ST” indicator is light up. 4 Details of the station selecting in operation are set in the "Seek Mode” of <HD Radio" Setting> (page 58). Station Preset Memory Putting a station in the memory. 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory 2 Enter Menu List mode Press the [MENU] button. 3 Enter Preset Memory mode Turn the [VOL] knob and press it when the desired item is displayed. Select “List & Memory". 4 Select the number to put in the memory Turn the [VOL] knob and press [VOL] knob for at least 2 seconds when the desired item is displayed. Select preset number. Cancelling the Preset Memory mode Press the [MENU] button for at least 1 second, and then press it again briefly. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the radio band you wish to store in the preset memory 2 Enter Menu List mode Press the [MENU] button. 3 Enter Auto Memory Entry mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “Auto Memory". 4 Open Auto Memory Entry Turn the [VOL] knob and press it when the desired item is displayed. Select “VES". When 6 stations that can be received are put in the memory, auto memory entry closes. Preset Tuning Recalling the stations in the memory. band 1 Select the radi 2 Enter Menu List mode Press the [MENU] button. 3 Select a desired station in the memory Turn the [VOL] knob and press it when the desired item is displayed. Select “List & Memory” > Preset number. HD Radio" Setting You can select following HD Radio Setting items. 1 Select the HD Radio source 2 Enter Menu List mode Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”. 4 Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed.

58 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Display overview Desired frequency Press button Settings" 92.1 MHz (FM) 9], (21, 1] Seek Mode” [Selects the tuning mode of the radio. 810 kHz (AM) [ERA] lAutol”. Automatic search or à station PAuto2”: Search in order ofthe stations in the Preset memory. Manual”: Normal manual tuning control Memories 6 stations with good reception automatical. Refer to <Auto Memory Enty> (page 58) Sets the receive mode ofthe HD Radio reciver Auto”: Automaticly tunes to analog broadcast vien there is no digital broadcast Digital”: Digital broadcast ni Analog”: Analog broadeasts only. Displys the tag memory usage of HD Radio receive. Up to 50 tags cn be registered 0 is uit. lo'/"s0" uns ON OFF the tag memory function oFHD Radio recever. l'OFF'/"ON" uro Memory” Receive Mode” TAG Memory” Tagging' {Factory setting) 5 Make a setting Press the [-@-4] or [æ1] button. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. Function of remote control Direct Access Tuning Tuning in a desired radio station by entering the frequency. 1 Select the radio band 2 Enter Direct Access Tuning mode Press the [DIRECT] button. is displayed. 3 Select Tuning item Press the [DIRECT] button. Pressing the [DIRECT] button each time switches the following tuning items as follows. Tems Display Frequency Channel Cnceling Diet Access Tuning = 4 Enter the frequency or Channel Press the number buttons. Example of frequency input 5 Tune in to the entered frequency Press the [4-4] or [b-»1] button. Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. iTunes Tagging Using an iTunes Tagging enabled HD Radio receiver you can tag your music. When you hear a song you enjoy on your local HD Radio station, you only have to press the [SEARCH MODE] button. The songs information will then be saved on this unit. The saved songs will then show up in a playlist called “Tagged"in iTunes the every next time you sync your iPod to your computer. So then you just need to click and then easily buy and download the song you were tagging directly from the Apple iTunes Music Store. 1 Enter iTunes tagging mode Press the [SEARCH MODE] button. will be indicated on the display when song information can be registered. + Turn”ON"the-TAGGING of <HD Radio” Setting> (page

58) when using this function.

+ Up to 50 TAGs (songs information] can be registered to this unit. When iPod is connected, the TAG information registered to this unit is transferred to the connected iPod. + The memory usage can be checked by selecting TAG MEMORY of <HD Radio” Setting> (page 58). English | 59

Basic Operations of remote control @—— virEcT Neon 7235 General control + Volume control: [VOL] + Source select: [SRC] + Volume reduce: [ATT] When the button is pressed again, the volume returns to the previous level. + Return to previous item: [4] + Exit from mode: [EXIT] + Selection of item: [AJ/[w] + Determination: [ENT] + Enter Audio Control mode: [AUD] In Tuner/HD Radio source + Band select: [FM]/[AM] + Station select: [-@-4]/[-»1] + Recall preset stations: [1]— [6] In USB/Music CD/Audio file source + Music select: [-@-4]/[p-21] + Movement between folders/files during Search mode: [A]/[v] + Return to previous folder: [#5] In iPod source + Enter Menu List mode: [AJ/[V] + Movement between items during Music search mode: [AJ/[v] + Return to previous item: [4] + Music select: [-@-4]/[p-21] In Satellite Radio tuner source + Preset band select: [FM] + Channel select: [-4-4]/[>->>1] + Recall preset channels: [1] — [6]

60 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Hands-free phone control Preparing the remote control unit Making a call + Enter Bluetooth mode: [KR] + Select a dialing method: [AJ/[V] -> [ENT] + Number dial input: Input a digit: [0] - 19] Input "+": [mm] Input ‘#": [FM] Input *": [AM] Clear the entered phone number: [4] + Make a call: [DIRECT] Receiving a call + Answer the call: [RQ] + Switch between the private talk mode and the hands-free talk mode: [ENT] Call waiting + Answer Another Incoming Call with the Current Call Suspended: [K] + Answer another Incoming Call after Terminating the Current Call: [SRC] + Continue the Current Call: [1] During a call + End the call: [SRC] Pull the battery sheet out from the remote control unit to the direction of the arrow. Changing the battery of the remote control unit Keep on slide (= CR2025 (side) Use a commercially available button battery (CR2025) Insert the battery with the + and - poles aligned properly following the illustration inside the case. ZX CAUTION + Do not set the remote control in hot places such as on the dashboard + Lithium battery. Danger of explosion ifthe battery is incorrectiy replaced Replace only with the same or equivalent type. The battery pack or batteries shall not be exposed to excessive heat such sunshine, fire or the like. + Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. I swallowed contact physician immediately. English | 61

Appendix About Audio file Playable Audio file AAC-LC (m4a), MP3 (mp3), WMA (wma) Playable disc media

Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Playable USB device USB mass storage class Playable USB device file system FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device + Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from (D to (0 cp) CDFoider Jo ‘Audio file PC) An online manual about audio files is put on the site, wwwkenwood.com/cs/ce/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well + In this manual, the word”USB device"is used for flash memories and digital audio players which have USB terminal. iPod/iPhone that can be connected to this uni Made for iPod nano (1st generation) _ «Pod nano (2nd generation)

• iPod nano (3rd generation) « iPod nano (Ath generation) + iPod nano (5th generation) _- iPod with video + iPod classic + iPod touch (1st generation) + iPod touch (2nd generation) Works with iPhone “iPhone 3G «iPhone 3GS iPhone iPhone 3G iPhone 3GS 4GB 468 16GB 468 1668 1668 3268 + Update iPod/iPhone software to the latest version + Type of control available varies depending on the type of connected iPod. See www.kenwood.com/cs/ce/ipod/ for further details + The word'iPod" appearing in this manual indicates the iPod or the iPhone connected with the iPod connection cable* (optional accessorÿ)
• Not supported model KCA-iP500. Refer to the web site for connectable iPod and iPod connection cable. http/wwwkenwood.com/cs/ce/ipod/ + IFyou start playback after connecting the iPod, the music that has been played by the iPod is played first. In this case, *RESUMING"is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. + You cannot operate iPod if'KENWOOD" or */" displayed on iPod About USB device + When the USB device is connected to this unit, it can be charged up provided that this unit is powered - Install the USB device in the place where it wi not prevent you from driving your vehicle proper. + You cannot connect a USB device via a USB hub and Multi Card Reader. + Take backups of the audio files used with this unit The files can be erased depending on the operating conditions of the USB device We shall have no compensation for any damage arising out of erasure of the stored data. + No USB device comes with this unit. You need to purchase à commercially available USB device.

62 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

+ When connecting the USB device, usage of the CA-UIEX (option) is recommended. Normal playback is not guaranteed when a cable other than the USB compatible cable is used Connecting a cable whose total length is longer than 5 m can result in abnormal playback About “KENWOOD Music Editor” + This unit supports the PC application*kKENWOOD Music Editor Lite verl.0"or later. + When you use the audio file with database information added by the "KENWOOD Music Editor Lite verl.0' you can search a file by title, album or artist name using the <File Search> (page 14). In the Instruction manual, the term “Music Editor media"is used to mean the device that contains audio files with database information added with KENWOOD Music Editor. + "KENWOOD Music Editor Lite ver1.0"is available from the following web site: www.kenwood.com/cs/ce/ For further information on KENWOOD Music Editor Lite ver1.0° refer to the site above or the application help. About the Cell-Phone This unit conforms to the following Bluetooth specifications:

You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well For the cell-phones verified for compatibility, access the following URL http//wwwkenwood.com/cs/ce/bt/ + The units supporting the Bluetooth function have been certiied for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG. However, it may be impossible for such units to communicate with your cell-phone depending on its type + HFP is a profile used to make a hands-free call + OPP is a profile used to transfer data such as a phone book between units. About the Bluetooth Audio player This unit conforms to the following Bluetooth specifications:

Bluetooth Standard Ve, 1.2 A2DP (Advanced Audio Distribution Profile] AAYRCP (Audio/Video Remate Control Prafle) + A2DP is a profile designed to transfer the music from an audio player. + AVRCP is à profile designed to control playback and selection of music by an audio player. About Satellite Radio tuner (Optional) This unit supports Satellite Radio tuners which are released by SIRIUS and XML Refer to the instruction manual of Satellite radio tuner. About HD Radio Reception (Optional) When you connect an HD Radio tuner, Tuner features ofthe unit are disabled and changed to HD Radio tuner features. With the HD Radio tuner, you can use the similar functions of Tuner features. English | 63

RDS Setngs” “DEMO Mode Function items appearing during standby Display Settings” Clock & Date” DSP &LLUM Fini Setings” SRCSeecr Bee MENU Language Buitin À Forced CD-DA Function items appearing when the iPod source is selected Display Page “Muse” Pays Frists Albums” FSongs FPodessts” FGenres FComposes”

“Pay Mode” FPod by Hand” Folder Random” FAT Random FFle Repeae “Settngs Ep Seat FDelete y Playlist” Clock & Date” FDISP & LUN FRDS Setings Function items appearing when the USB source is selected Display “Music” “Pay Mode” He Scan” Folder Random” FFle Repeat FFolder Repeae “Settngs PSkip Seardr FCIodk & Date” FDISP &ILLUMT FRDS Setings

64 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

Function items appearing when the Music CD/ Function items appearing when the Hands-Free Audio file source is selected source is selected Display Page Display Page "Muse E FT Setings” = Play Mode” E Phone Selection ET] File Scan” Fhucio Selection” Teck San FSNS Dovnload # Folder Random” PSN inbo # Disc Rando Force a 5 Magazine Random FDeraled Setup = Fe Repea Device Regis” r] Folder Repet FSPCL DVC Selecr” Track Repe FDevice Delee” Hi Disc Repeat” FIN Code Ed El FSetings” = Fu Answer” # Cod & Date” = FBluetooïn HF7AudIo" DSP &ILUMI" = Fa Beep” RDS Serngs” = FBTENN pate” Fi Gain Function items appearing when the Tuner CUP source is selected Echo Gr Display FCock & Date” = “ist & Memory” PDISP 8 LLUMM _ FRDS Setings = Function items appearing when the Bluetooth LUE Audio source is selected FIV Sera 2 Display Page FSetings” = “Settings _ Seat Mode” Fhudio Selection” E) uro Memory Feed Setup = Tr Device Regst # Fred ON FSPCLDNC Sec Cod BDae = FDevice Date ül DSP & LU = FIN Code E) FETE Update” E Function items appearing when an AUX source EU TS = Is selected FDISP 8 LLUNT = Display Page PROS Setting” = “Setings" _ AUX Name Set 5 Cod B Dar = DSP &LLUN = RDS Setings” = English | 65

Appendix Function items appearing when the Satellite Display Indicator items Radio tuner source is selected Sue PH tee Display Page General FAT fhdicres hat the anenutors acte ist Memory” 57,5 FAP dires that the Favote can be registre 5 Pod/USBCDAN [dcr that a disc insert OO SCAN fidicares that te Sean fanaton SON. Changer SCAN fIndicates that the Fe Scan function 5 ON. SRETANE FRONT [indices that the Disc Random function is ON Channel Seat 5 FRONT [indices hat the race Random function 1 ON Channel Scrr 5] Indices hate Foder Random function ON ati = Indices hate Magazine Random fun 8 ON RE F FALRONE ia hate AI Random into EF LPLRDUE [indices hat the Plays Random function is ON. = FONS-ADN [dites hat he DS Random fnction 8 ON Cock Date = FONSREP [indicate hat the DNS Hepeatfnction 8 ON DS? &ILLUN = nicates arte Disc Repea function & ON RDS Settings _ Indicres that the Fa Repet funcion is ON, ion i i io Indices hate Foder Repeat functions ON Function items appearing when the HD Radio Indices hate Fe Repea union 1 ON. tuner source is selected Indicates that the Plays Repeat function is ON Display Page Indicates that the Repeat function is ON ist & Memory” 58,58 Identies the MP3 le MT” 3 dents the WMA fe. FN denies he AACIC NE LE Indices hate My Pay mode sleted non. LU Tuner Indices the RDS 1 being recened ET = Indices hat stereo broadcast Dengrecevet So El Indices the rception state off information. (On: T1 io Nemo 3 being received Blnking: Li not beng received} Re Mode ni FD ado [HD [nds a anag radcsts bg eee Tacemor DD [indices hat igal roadeast & Dngrecewel TT MS [dites whether ne reception channel main Sub agging On: The channel is main, linking The channel is sub} Radio ID Wa TC niaes that Mu channels being receed Clock & Date” = pi ndicres that stereo broadcast being recened DISP &ILLUMI" s [TAG |Indicates that Tagging is enabled. Fands- l'OMait [Indices al-watng Free PAIE [idees a cel-phone calin progress PT indiates hat the Blueooë function canDe sed UT noces harbaney eve of ce phone. Fu Ce AE ie desd EXT néicrestharthe bar les ofcl-phone cmotbe obtained MFanl indices hat signa svengthof cel phone. Maximum Fall Tes a Minimum DUT [indies the ou of coverage one 3e |iees hatthe signal suengu ofce-phone mat be obtained.

Appendix ACAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN

Location : Top Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC NOTE This equipment has been tested and found to comply with the limits for à Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, ifit is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: + Reorient or relocate the receiving antenna. + Increase the separation between the equipment and receive. + Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. + Consult the dealer or an experienced radio/TV technician for help. + Contains Transmitter Module

+ Contains Transmitter Module

IC (Industry Canada) Notice Operation is subject to the following two conditions (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation ofthe device. The term“iC:" before the certification/registration number only signifies that the Industry Canada technical specification were met. This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See www:dtsc.ca.gov/hazardouswaste/perchlorate HD Radio” Technology Manufactured Under License From iBiquity Digital Corp. US. and Foreign Patents. HD Radio" and the HD Radio Ready logos are proprietary trademarks of iBiquity Digital Corp. The’AAC" logo is a trademark of Dolby Laboratories. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. iTunes is a trademark of Apple Inc. iPod is a trademark of Apple Inc, registered in the US. and other countries. iPhone is a trademark of Apple Inc. “Made for iPod” means that an electronic accessory has been designed to connect specificall to iPod and has been certified by the developer to meet Apple performance standards “Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

68 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

Accessories “Accessary of KDC-X994/ KDC-BT94SU Installation Procedure À To prevent a short circuit, remove the key from the ignition and disconnect the © battery. 2 Make the proper input and output wire connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wiring harness wires in the following order: ground, battery, ignition. 5 Connect the wiring harness connector to the unit. 6 Install the unit in your car. 7 Reconnect the © battery. 8 Press the reset button À WARNING I you connect the ignition wire (red) and the battery wire ellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires ta the power source running through the fuse box.

Mounting and wiing this product requires skills and experience. For safetys sake, leave the mounting and wiring work to professionals Make sure ta ground the unit to a negative 12V DC power supply. Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing Do not use your own screws. Use only the screws provided. I you use the wrang screws, you could damage the unit + Ifthe power is not turned ON (‘PROTECT" is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated, Therefare, the speaker wire should be Accessories/ Installation Procedure checked. I your cars ignition does not have an ACC position, connect the ignition wires to a power source that can be tumed on and off with the ignition key. you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die. Ithe console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening, Ifthe fuse blowss, fist make sure the wires arentt touching to cause a short circuit, then replace the old fuse with one with the same rating Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminal. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the © wires or ground them to any metal part in the car. When only to speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rean. For example, if you connect the ® connector of the left speaker to a front output terminal, do not connect the © connector to a rear output terminal. After the unit is installed, check whether the brake lamps, blinkers, wäpers, etc. on the car are working properl. Mount the unit so that the mounting angle is 30° or less. Reception may drop if there are metal objects near the Bluetooth antenna Bluetooth antenna unit About CD players/disc changers connected to this unit Ithe CD player/ disc changer has the “O-N'switch, set it to the"N" position. The functions you can use and the information that can be displayed may differ depending on the models being connected For Good Reception To assure good reception, note the following + Communicate with the cell-phone within the line- ofssight distance of 10 m (30 f0). The communication range becomes shorter depending on the surounding environment. The communication range also becomes shorter when there is an obstacle between this unit and the cell-phone. The above maximum communication range (10 m) is not always assured. A broadcast station or walkie-talkie located nearby can interfere with communication due to too strong signal English | 69

Connecting Wires to Terminals Rear output Do not remove the cap °e Tous devce 2 scrsou co noetre 1Q 0: Fonouput USB connector (1m) USB cable The connector ! O@ sub Woofer output will cause the unit to malfunction ifit gets in Microphone tauch with any metallic input (KDC-X994 / part af the vehicle. KDC-BT94SUonIy)

Microphone (äccessory®) FM/AM antenna input F:00 : ol aux input (Stereo) Use the mini-plug which is stereo type and does not have any resistance. Antenna Cord Fuse (10A) — [ MWiring harness : (Accessary@) To Kenwood disc changer/ External optional accessory LR 0 connect these leads, refr to the relevant instruction manuals. White White/Black To front left speaker Gray/Bak To front right speaker Green/Black To rear left speaker Purple Purple/Black To rear right speaker DEEE DE If no connections are made, do not let the wire come out from the tab.

Power control wire (Blue/White) When using the optional power amplifier, connect to its power control terminal. Depending on what antenna you are using, connect either ta the control terminal of the motor antenna, or to the power terminal for the booster amplifier ofthe film-type or short pole type antenna Connect ta the terminal that is grounded when either the telephone rings or during conversation. (KDC-X794/KDC-MP745U only) 1° connect the Kenwood navigation system, consul your navigation manual To car light control switch To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. @ cg |oniion key switch lgnition wire (Red) ACC Car fuse box (Main fuse) Battery wire (Yellow) wire (Black) © (To car chassis)

70 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

Installation/Removing the Unit non-Japanese cars Removing the hard rubber frame Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. + Make sure that the unit is installed securely in place. the unit is unstable, it may malfunction (for example, the sound may skip) Japanese cars 1 Refer to the section <Removing the hard rubber frame> and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T, @\

N° CE À T: Toyota cars N: Nissan cars Accessory®. for Nissan car Accessory®. for Toyota car À CAUTION Install this unit in the console of your vehicle. Do not touch the metal part of this unit during and shortly after the use ofthe unit. Metal part such as the heat sink and enclosure become hot. Engage the catch pins on the removal tool and remove the two locks on the upper level Upper the frame and pull it forward as shown in the figure. Accessory® Removal tool 2 When the upper level is removed, remove the lower two locations. + The frame can be removed from the bottom side in the same manner. Removing the Unit À Refer to the section <Removing the hard rubber frame> and then remove the hard rubber frame 2 Detach the faceplate. 3 Insert the two removal tools deeply into the slots on each side, as shown. 4 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside. Accessary@ + Be careful to avoid injury from the catch pins on the removal tool. 5 Pull the unit all the way out with your hands, being careful not to drop it English | 71

Installation/Removing the Unit Accessory of KDC-X994/ KDC-BTO45U Installation the Microphone Unit 1 Check the installation position of the microphone (accessory ( 2 Remove oil and other dirt from the installation surface. 3 Install the microphone. 4 Wire the cable up to the unit with it secured at several positions using tape or the like. Accessony © Fix a cable with a commercial item of tape. Peel the release coated paper of double-fa fix on the place shown above. adhesive tape to Adjust the direction ofthe microphone ta the driver. + Install the microphone as far as possible from the cell phone.

72 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. EX : cannot set up the subwoofer. + No output from the subwoofer. + Cannot set up the subwoofer pos position setting. D - The Dual zone function is enabled. # <Dual Zone System> (page 40) «In the speaker select option, None is selected for the subwoofer. <Speaker Setting> (page 42) El: cannot set up the equalizer. + Cannot set up the Bass Boost. + Cannot set up the Highway sound. + Cannot set up the Supreme. + Cannot set up the Position control D The Dual zone function is enabled. # <Dual Zone System> (page 40) + The DSP function is disabled. er "DSP Set” of <Audio Control> (page 38) : In the speaker select option, None is selected far the rear speakers. er <Speaker Setting> (page 42) El: cannot select the output destination of the subsource in the Dual zone. + Cannot adjust the volume of the rear speakers. D The Dual zone function is disabled. sx <Dual Zone System> (page 40) El cannot set up Display. D <Demonstration mode Setting> (page 35) is not urned off El cannot switch to USB/iPod source. D The Dual zone function is set to USBAPod. er <Dual Zone System> (page 40) EX the number of songs contained in SONGS” category of this unit is different from that contained in “SONGS” category of iPod. D Podcast files are not counted in this unit as this unit does not support the playback of podcast files What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General HE the operation check sound (beep sound) does not sound. W The preout jack is being used. ur The Touch Sensor Tone cannot be output from the preout jack E he illumination flashes when the knob or button is operated. W This is the key illumination effect 2 You set this effect in'ILLUMI Effect" of <Display Setting> (page 28). HE he key illumination effect brought about in conjunction with the sound volume is small. W The key illumination effect may be insufficient depend he sound volume and sound quality. Tuner source E radio reception is poor. W_ The car antenna is not extended. 2 Pull the antenna out all the way. Disc source A the speci plays instead. W The specified CD is quite dirty. «x Clean the CD, referring to the CD cleaning of the ction on <Handlin jpage 5) "7" The disc is loaded in à different slot from that specified “ Eject the disc magazine and check the number for the specified disc. “9 The disc is severely scratched. lay, but another one Audio HE the sound skips when an Audio file is being played. W The media is scratched or dirty. ur Clean the media referring to the CD cleaning of the section on <Handling CDs> (page 5) Fe recording condition is bad 2 Record the media again or use anot er media. English | 73

Troubleshooting Guide Hands-free H rhe hands-free talk volume is low. # The hands-free talk volume is set at a low level. & The hands-free talk volume can be adjusted independentiy. Adjust it during hands-free talk. “Mic Gain” and *NR Level” <Bluetooth Setting> (page 48) H no sound is he: d from the rear speakers. W_ You are talking in the hand-free talk mode. # No sound is heard from the rear speakers in the hands-free talk mode. E no beep is heard at reception of an incoming call. # No beep is heard depending on the type of your cell-phone. sx The"Call Beep'of <Bluetooth Setting> (page 48) is H voice is not recognized. # The vehicle window is open. sx lfthe surrounding noise is large, voice cannot be recognized properly. Close the vehicle windows .toreduee noise, # Small voice. sx If voice is too small, it cannot be recognized properly. Speak into the microphone à little more ….loudiy and naturally. "The person uttering the voice tag is not the one who registered the it. sx Only the voice of the person who registered the voice tag can be recognized. Bluetooth audio source H The Bluetooth audio player cannot be registered (pairing). #7 The PIN code is fixed. # When a PIN code is specified in the Instruction Manual for Bluetooth Audio Player, register it with reference to <Registering PIN Code> (page

50) ta register the Bluetooth audio player. no PIN

code is specified in the Instruction Manual, try “0000 H ïhe sound from the Bluetooth au discontinuous. # The distance between this unit and audio player is too far. «x. Move the audio player nearer ta this unit. "Another Bluetooth device is affecting the Bluetooth communication &x "Turn off another Bluetooth device. #_ Move another Bluetooth device away from this player is unit. "Another Bluetooth device or profile is used for communication & The downloading of the Phone book or the SMS disconnects the sound The messages shown below display your systems condition. TOC Error: - No disc has been loaded in the disc magazine. + The CD is quite dirty. The CD is upside- down. The CD is scratched à lot. ERROR 05: The disc is unreadable. ERROR 77/Mecha Error The unit is malfunctioning for some reason = Press the reset button on the unit. the “ERROR 77°/Mecha Error” code does not disappear, consult your nearest service center. ERROR 9: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason + Check the disc magazine. And then press the reset button on the unit. IFthe “ERROR 99" code does not disappear consult your nearest service center CDAN (link: The CD player section is not operating proper. “ Reinsert the CD. IFthe CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center. Protect (Blink The speaker wire has a short-circuit or touches the chassis ofthe vehicle, and then the protection function is activated + Wire or insulate the speaker cable properly and press the reset button. Ifthe “Protect” code does not disappear, consult your nearest service center Unsupported File: An Audio file is played with a format that this unit can't support. Copy Protection: À copy-protected file is played. Read Error. The file system of the connected USB device is broken. + Copy the files and folders for the USB device again. Ifthe error message is still displayed, initialize the USB device or use other USB devices The USB device is selected as a source although no USB device is connected < Change the source to any source other than USB. Connect an USB device, and change the source to USB again. No Device:

74 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745Ù

N/A Device: + An unsupported USB device is connected - Connection ta the iPod has failed. < Check that the connected iPod is an iPod that is supported, See <Abut Audio file> page 62) for information on supported iPads. No Music Data/Error 15: USB ERROR. iPod Error. + The connected USB device contains no playable audio fil. + Media was played that does not have data recorded that the unit can play. Some trouble may have occurred to the connected USB device. + Remove the USB device, then cycle the power switch to ON. K the same display is repeated, use another USB device. Connection ta the iPod has failed.

• Remove the USB device and then recannect it. < Confirm that the software for the iPod is he latest version. USB REMOVE (Blink} No Number No Data: No Entry: HF Disconnect: HF Error 07: HF Error 68: Un Known: Device Full PIN Code NG: Connect NG: Pairing Failed The Remove mode has been selected for the USB device/iPod. You can remove the USB device/Pod safely. The calling party does not notify a caller ID. There is no phone number data. - There is no outgoing call list. There is no incoming call list There is no missed call list There is no phone book list The cell-phone has not been registered (pairing) The unit cannot communicate with the cell- phone. The memory cannot be accessed + Turn off the power and on again. Ifthis message still appears, press the reset button on the control unit The unit cannot communicate with the cell. phone. < Turn off the power and on again. Ifthis message still appears, press the reset button on the control unit The Bluetooth device cannot be detected 5 Bluetooth device have already been registered. No more Bluetooth device cannot be registered The PIN code is wrong The unit cannot be connected to the device: Pairing error. Err No Matching Too Soft Too Loudr 00 Long The voice tag is wrong. Voice cannot be recognized because of an unregistered voice tag, etc. Voice is too small and cannot be recognized. Voice is too large to be recagnized. The word or utterance is too long to be recognized. No Phonebook: Data is not contained in the phone book. No Message: No Record Memory Full No short message in In Box The voice tag is not registered in the phone book. The number of voice tags reaches the maximum number ta be registered in the phone book Favorite: No Memory: No Access: No Voice: The procedure is not registered to Favorite Preset Memory The procedure preset with Favorite Control cannot be available. The preset content may. not be recalled depending on the selected source or mode: No call English | 75

Specifications FM tuner section USB Interface Frequency range (200 kHz space)

Output Power +4dBm (MAX), GdBm (AVE) Power Class 2 Maximum Communication range Line of sight approx.10m (328 ft) Profiles HFP (Hands Free Profile) HSP (Headset Profile) SPP (Serial Port Profile) PBAP (Phone Book Access Profile) OPP (Object Push Profile) SYNC (Synchronization Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) USB Standard USB1.1/ 2.0 (Full speed) Maximum Supply current 500 mA File System FAT16/ 32 MP3 decode Compliant with MPEG-1/2 Audio Layer-3 WMA decode Compliant with Windows Media Audio AAC decode AAC-LC "mda' files CD player section Laser diode GaAlAs Digital filter (D/A) 8 Times Over Sampling D/A Converter 24 Bit Spindle speed 500 — 200 rpm (CLV) Wow & Flutter Below Measurable Limit Frequency response (+1 dB) 10 Hz 20 kHz Total harmonic distortion (1 kHz)

[2 This symbol mark indicates that Kenwood manufactured this product eco s0as to decrease harmful influence on the environment. KENWOOD