P5525 - Digital Timer Emos - Free user manual and instructions

Product Type	Digital Timer
Brand	Emos
Model	P5525
Dimensions (approx.)	70 x 50 x 20 mm
Weight (approx.)	50 g
Power Supply	1 x CR2032 battery (included)
Display Type	LCD digital display
Maximum Countdown Time	99 minutes 59 seconds
Countdown Resolution	1 second
Alarm Duration	60 seconds
Alarm Type	Audible beep
Memory Function	Last time setting recall
Pause/Resume	Yes
Magnet Mount	Yes, with built-in magnet
Stand or Clip	Foldable stand
Maintenance	Wipe with dry cloth; avoid liquids
Battery Replacement	Replace CR2032 when display dims
Safety	Keep away from water and heat sources
Compliance	CE, RoHS
Intended Use	Indoor kitchen, office, hobby timer
Warranty	2 years (refer to retailer)

Frequently Asked Questions - P5525 Emos

How do I set the timer on the Emos P5525?

Press the SET button to enter time setting mode. Use UP and DOWN to adjust minutes and seconds. Press START/STOP to begin countdown.

What type of battery does the P5525 use?

The timer uses a single CR2032 coin cell battery. Remove the battery cover on the back to replace it.

How do I reset the timer?

Press and hold the CLEAR button for 3 seconds to reset the display to zero. Alternatively, remove and reinsert the battery.

Can I use the timer while it is charging?

The timer is battery-powered and does not require charging. Simply replace the battery when low.

Is the timer magnetic?

Yes, the Emos P5525 has a built-in magnet on the back for attaching to metal surfaces like refrigerators.

How loud is the alarm?

The alarm emits a clear beep sound that is approximately 80 dB at 30 cm. It lasts for 60 seconds unless stopped.

Can I pause the countdown?

Yes, press the START/STOP button during countdown to pause. Press again to resume.

What is the maximum time I can set?

The maximum countdown time is 99 minutes and 59 seconds.

How do I clean the timer?

Clean the timer with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.

Is the timer suitable for outdoor use?

The timer is designed for indoor use only. Avoid exposure to moisture, dust, or extreme temperatures.

USER MANUAL P5525 Emos

Operating temperature: -10 °C to +40 °C

increment for setting time: 1 minute

16 combinations of days or blocks of days

Deviation: ±1 minute a month

Switched phase

Back-up battery: NiMH 1.2 V >100 hours

Features

1. The digital timer socket can be used to preset a specific time to turn your appliances on or off outdoors or in your household. It is ideal for saving energy and improving the safety of your household.
2. The random on/off feature allows you to turn appliances on or off at irregular times, making it ideal not only for certain automatic functions in your household, but also for protecting you against break-ins during your absence.
3. The LCD screen shows the programme settings and real time.
4. You can set up to 10 programmes for activating/deactivating the socket.

Installation

1. Plug the timer socket into a 230 V AC socket.
2. Let it charge for approx. 12 hours.
3. Once the socket is charged, erase all stored information by pressing the MASTER CLEAR button using a sharp object such as a pencil or pen.
4. The timer socket is now ready for setting and use.

Time Display

Time can be displayed in two different ways.

1. 12-hour time display: digital display of time from 00:00 to 11:59, with the screen showing AM (from midnight to noon) or PM (from noon to midnight).
2. 24-hour time display: digital display of time from 00:00 to 23:59, with no AM or PM on the screen.
3. To switch between the two time display modes, press the CLOCK and TIMER buttons simultaneously.

Setting the Day of the Week and Time

1. Setting the Day of the Week

1.1 Press and hold down the CLOCK button and press the WEEK to set the day of the week.
1.2 The order of the days is displayed as follows:

Mo = Monday, Tu = Tuesday, We = Wednesday, Th = Thursday, Fr = Friday, Sa = Saturday, Su = Sunday

1.3 If you hold down the CLOCK button and simultaneously press the WEEK button once, the days are displayed in order slowly. If you press and hold down both buttons, the days in the week will change more rapidly. Release the buttons once the day of the week of choice appears on the screen.

1. Setting Time

2.1 To set the time, press and hold down the CLOCK button and press the HOUR button.
2.2 If you hold down the CLOCK button and press the HOUR button once, the time changes slowly. If you hold down both buttons at the same time, the time changes more rapidly. Release the buttons once the time of choice appears on the screen.
2.3 To set the minutes, press and hold down the CLOCK button and press the MINUTE button. Set the minutes the same way you did hours, as described in point 2.2.
3. Setting Daylight Saving Time

3.1 Press and hold down the CLOCK button and press the ON/AUTO/OFF to switch to daylight saving time. The time on the screen will automatically shift forward one hour and the letter S will appear on the screen.
3.2 Pressing the CLOCK and ON/AUTO/OFF buttons again cancels daylight saving time, the time shifts back one hour and the letter S disappears.

Note: To set the day of the week and time, the LCD screen must be in real time display mode. If the LCD screen is in programme setting mode, press the CLOCK to return to real time display mode.

Programme Settings

1. If the LCD is displaying real time (CLOCK is on the screen), press the TIMER button once to switch to programme setting mode; 10N will appear on the left side of the screen and the screen will show the word PROGRAM.

1.1 "1" indicates the number of the programme group (programme group numbers range from 1 to 10).
1.2 "ON" indicates turning the socket on.
1.3 "OFF" indicates turning the socket off.
2. To select a programme group and choose between the on/off state, press the TIMER button to increase the programme group number. The order is as follows:

1ON >1OFF 2ON 2OFF ..... 10ON 10OFF

Real time will be displayed automatically after 30 s of inactivity in settings or if you press the CLOCK button.

1. After selecting a programme (1–10), you can set the day of the week and the time. Press the WEEK button to select the day or block of days in the week. The days/blocks of days are displayed in this order:

3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

1. To set the programme time, the LCD screen must show the word PROGRAM.

4.1 To set the hour when the programme should turn on (10N), press the HOUR button once to slowly set the hour value. If you hold down the button, the value changes more rapidly. Release the button once the time of choice in hours appears on the screen.
4.2 To set the minutes when the programme should turn on (10N), press the MINUTE button once to slowly set the minute value. If you hold down the button, the value changes more rapidly. Release the button once the time of choice in minutes appears on the screen.
4.3 To set the end of the programme (10FF), press the TIMER button and set the time as described in points 4.1 and 4.2

Note:

(a) If you wish to change a previously set programme, proceed as described in points 4 to 4.3 in section F and enter new values to overwrite the previous settings.
(b) Once a programme is set, press the CLOCK button to immediately return to real time display. If you don't, real time will be displayed automatically after 30 seconds of inactivity.

Random Setting

1. The random setting feature turns the connected appliance on and off irregularly at a 10 to 31 minute interval from 18:00 to 6:00.
2. Plug the timer socket into a mains socket and set the programme using the ON/AUTO/OFF button to AUTO so that you can start/end the random function.

3. Press the RANDOM button once; the letter R will light up on the right of the screen and the random function is now active. The socket will be off for 10 to 31 minutes. After that, the function will switch to the opposite mode, i.e. on.

4. Pressing the RANDOM button stops the random function and R will disappear from the screen.

Cancelling/Restoring a Previously Set Programme

Pressing the ON/AUTO/OFF button allows you to cancel/restore a preset programme; the display on the screen changes in this order:

1. "ON" cancel a preset programme; the appliance will stay on the whole time.
2. "AUTO" restore a preset programme; the appliance will turn on and off automatically in accordance with your settings.
3. "OFF" cancel a preset programme; the appliance will stay off the whole time.

Note:

A previously set random function will only activate if the timer socket is in AUTO mode.

If the random function is on, the auto on/off programme functions between 6 pm and 6 am are not active.

Connection

1. Set the on/off programmes on the timer socket as described above.
2. Turn off the electrical appliance.
3. Plug the appliance's power cable into the timer socket and plug the timer socket into a mains socket.
4. Turn on the appliance.
5. The appliance will now be turn on/off based on your set programmes until you manually cancel the setting.

SAFETY WARNINGS

• If the screen isn't working, plug the timer socket into a 230 V AC socket and let it charge – the screen should light up in about 2 hours and the socket should be fully functional. To recharge fully, leave it in the socket for approx. 12 hours.
• The device must only be connected to and used with 230 V AC (\~)/50 Hz electrical wiring fitted with a protective contact in line with valid electrical regulations.
• Pay attention to the data on the type label of the appliances connected to the device. Maximum input power of all connected electrical appliances must not exceed 3 680 W (max. current 16 A). Max. inductive load: 2 A.
• Make sure that the lead-in protective conductor is not disrupted – the life of the user may be endangered if the protective conductor is disrupted.
• Do not plug the device into sockets with a circuit breaker rated higher than 16 A. The socket may only be switched with a maximum inductive load of 2 A. Always make sure the plug from the connected device is fully plugged into the socket.
• Do not leave the connected electrical appliances unattended.
• Never tamper with the electrical circuits of the device or disassemble it! If the device is damaged or non-functional, contact the seller.
• When cleaning the timer socket, always unplug it from power first. Then clean it using a dry cloth. Do not use any cleaning agents or immerse the device in water!
• The recommended operating temperature is from -10^ to +40^ .
• Only plug rubber cables with an IP44 plug into the socket.
• The timer socket should be used in vertical position only to maintain its IP44 rating.
• This appliance is not intended for use by persons (including children) whose physical, sensory or mental disability or lack of experience and expertise prevents safe use, unless they are supervised or instructed in the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Any use of the device not listed in the previous sections of the manual will result in damage to the product and could present danger in the form of a short circuit, injury by electric current, etc. The device must not be modified or otherwise restructured! Safety warnings must be followed unconditionally.

Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfill, dangerous substances may reach groundwater and subsequently food chain, where it could affect human health.

3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

3.1 MO TU WE TH FR SA SU

3.2 MO->TU->WE->TH->FR->SA->SU

3.3 MO TU WE TH FR

3.4 SA SU

3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

3.2 MO TU WE TH FR SA SU

3.3 MO TU WE TH FR

3.4 SA SU

3.5 MO TU WE TH FR SA

3.6 MO WE FR

3.7 TU TH SA

3.8 MO TU WE

3.9 TH FR SA

3.10 MO WE FR SU

1. Za nastavitev časa programa mora biti na LCD zaslonu prikazan napis PROGRAM.

3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

1. Za postavljanje vremena programa, LCD zaslon mora prikazati riječ PROGRAM.

3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

3.1 MO TU WE TH FR SA SU

3.2 MO->TU->WE->TH->FR->SA->SU

3.3 MO TU WE TH FR

3.4 SA SU

3.5 MO TU WE TH FR SA

3.6 MO WE FR

3.7 TU TH SA

3.8 MO TU WE

3.9 TH FR SA

3.10 MO WE FR SU

3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

3.2 MO TU WE TH FR SA SU

3.3 MO TU WE TH FR

3.4 SA SU

3.5 MO TU WE TH FR SA

3.6 MO WE FR

3.7 TU TH SA

3.8 MO TU WE

3.9 TH FR SA

3.10 MO WE FR SU

3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA

3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

3.1 MO->TU->WE->TH->FR->SA->SU
3.2 MO TU WE TH FR SA SU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU

1. "ON" cancel a preset programme; the appliance will stay on the whole time.
2. "AUTO" restore a preset programme; the appliance will turn on and off automatically in accordance with your settings.
3. "OFF" cancel a preset programme; the appliance will stay off the whole time.

Opmerking:

VEILIGHEIDSWAARSCHUWING