L1800FD DSP - Receiver DYNACORD - Free user manual and instructions
Find the device manual for free L1800FD DSP DYNACORD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DSP Receiver |
| Brand | Dynacord |
| Model | L1800FD DSP |
| Dimensions (W x H x D) | 483 x 44 x 200 mm (19" rack, 1U) |
| Weight | 3.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 30 W |
| DSP Processing | 24-bit, 48 kHz sampling rate |
| Inputs | 2 x XLR balanced, 2 x RCA unbalanced |
| Outputs | 2 x XLR balanced, 1 x RCA unbalanced |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Signal-to-Noise Ratio | > 100 dB |
| Total Harmonic Distortion | < 0.01% |
| Built-in Effects | Reverb, delay, EQ, compressor |
| Control Interface | Front panel buttons and LCD display |
| Remote Control | RS-232, Ethernet for software control |
| Mounting | 19" rack mountable |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 20% to 80% non-condensing |
| Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety | Use grounded outlet, keep away from moisture |
| Spare Parts & Repairability | Contact Dynacord authorized service centers |
| Included Accessories | Power cord, rack ears, user manual |
Frequently Asked Questions - L1800FD DSP DYNACORD
How do I reset the Dynacord L1800FD DSP to factory defaults?
Press and hold the Menu button while powering on the unit. Navigate to 'Factory Reset' and confirm.
Can I use the L1800FD DSP with a subwoofer?
Yes, connect the subwoofer to the Sub Out or use the built-in crossover in the DSP settings.
What is the maximum input level?
The maximum input level is +20 dBu on the XLR inputs.
How do I update the firmware?
Download the latest firmware from Dynacord's website, connect via USB or Ethernet, and use the Dynacord Update Tool.
Is the L1800FD DSP compatible with 100V line systems?
No, it is designed for low-impedance systems (4-16 ohms). Use an external 100V transformer if needed.
How do I use the built-in effects?
Press FX on the front panel, select an effect type using the rotary encoder, and adjust parameters via the display.
Can I control the unit remotely?
Yes, via RS-232 or Ethernet. Use the Dynacord Remote Control software or integrate with third-party systems.
What do the LED indicators mean?
Power (blue): unit on; Signal (green): audio present; Clip (red): signal distortion; Fault (amber): system error.
How do I set up a multi-zone system?
Use the Output Matrix in the DSP menu to route inputs to different output channels for separate zones.
What is the warranty period?
Dynacord offers a standard 3-year warranty. Register your product online for extended coverage.
User questions about L1800FD DSP DYNACORD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual L1800FD DSP - DYNACORD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. L1800FD DSP by DYNACORD.