Luminoso - Air purifier FAKIR - Free user manual and instructions

Product Type	Ionic Air Cleaner
Model	Luminoso
Brand	Fakir
Voltage	220-240V / 50-60 Hz
Power Consumption	50W
Protection Class	Class II
Dimensions (W x D x H)	340 x 290 x 540 mm
Weight	7.8 kg
CADR Value (Clean Air Delivery Rate)	300 m³/h
Ion Output	3x10⁶ /cm³
Active Oxygen Output	≤0.05 ppm
UV Spectrum	380 nm ±5, UVA
Dust Collection Rate	99.97%
Air Volume	5.6 m³/min
Recommended Room Size	20-50 m²
Fan Modes	Auto, Silent, Low, Medium, High, Turbo
Noise Levels	Silent: 30 dB, Low: 38 dB, Medium: 45 dB, High: 52 dB, Turbo: 61 dB
Filter Types	Pre-Filter, Dust Collection Unit, HEPA Filter, Active Carbon - TiO₂ Filter
Filter Replacement Interval	Every 6 months (recommended)
Sensor Cleaning Interval	Every 1-2 months (recommended)
Child Lock	Yes (via button combination or remote control)
Timer	1-9 hours
Sleep Mode	Yes (lowest brightness and quiet mode)
Air Quality Indicator	Green (clean), Yellow (low), Orange (medium), Red (high pollution)
Remote Control	Included
Box Contents	Device, Remote Control, Cleaning Brush, User Manual, Service List

Frequently Asked Questions - Luminoso FAKIR

How do I turn on the air purifier?

Press the On/Off button on the control panel or remote control. The device will start in Auto mode.

How to change fan speed?

Press the Mode button repeatedly to cycle through: Auto → Silent → Low → Medium → High → Turbo. The current mode is displayed on the screen.

What does the air quality indicator color mean?

Green – clean air; Yellow – low pollution; Orange – medium pollution; Red – high pollution.

How to activate sleep mode?

Press the Sleep button. The display brightness lowers and the device runs in Silent mode. Press again to cancel. Other buttons are disabled in sleep mode.

How do I set the timer?

Press the Timer button repeatedly to set 1-9 hours. The appliance will count down and turn off automatically when time is up.

How to enable child lock?

Press and hold the Sleep and On/Off buttons simultaneously for 3 seconds. LOCK appears on the screen. Repeat to unlock.

How to clean the pre-filter?

Remove the front panel, then lift the pre-filter. Wash it with lukewarm or cold water (max 40°C) and let it dry completely before reinserting.

How to replace the HEPA filter?

When REPLACE FILTER appears, pull out the old filters using the side tabs. Install the new HEPA filter with the white side facing you, then the Active Carbon-TiO₂ filter. Press Sleep and Mode together for 3 seconds to reset the indicator.

What should I do if the device makes abnormal noise?

Check if the pre-filter is blocked or if the new filter still has its plastic packaging. Also ensure air inlets/outlets are clear. If noise persists, turn off and contact authorized service.

How to reset the cleaning indicator?

After cleaning the dust collection unit, press and hold the Sleep and Timer buttons for 3 seconds until CLEAN CELL disappears.

USER MANUAL Luminoso FAKIR

LUMINOSO

EN Ionic Air Cleaner

Illustration of a hand opening a refrigerator with an open storage cabinet (no text or symbols visible)

Illustration of a hand cleaning a cylindrical container with a brush (no text or symbols)

DE

Diagram showing a faucet spraying water onto a solar panel (no text or symbols present)

HINWEIS!

Line drawing of a kitchen sink with a water dispenser and a rack-mounted device (no text or symbols)

HINWEIS!

Technical line drawings of two different air purifiers with ventilation grilles and control knobs (no text or symbols)

Simple line drawing of a roof structure with a central component and two corner connectors (no text or symbols)

Line drawing of a hand inserting a small component into an open electrical box (no text or symbols)

Line drawing of a hand cleaning a circular fan component inside a device casing (no text or symbols)

Aufbewahrung

We hope you'll enjoy your product and we thank you for choosing Fakir Hausgeräte, who has its signature on innovative technologies.

We hope you to get the best out of Fakir LUMINOSO Ionic Air Cleaner, produced with high quality and technology. Therefore, before using the product, we kindly ask you to read this User Guide carefully and keep it for future reference.

Information about the operating instructions

You may be used to use similar products, but please take time to

read the user guide. This guide has been prepared for you to get the best performance out of the products

you have purchased.

Liability

In case of any damage that may occur as a result of use not in compliance

with the instructions in this user manual, use of the device outside its intended use, unauthorized

repairs by any persons other Fakir Authorized Services,

Fakir Elektrikli Ev Aletleri Dış Tic. A.Ş. shall not assume any responsibility.

WARNING!

This sign describes the hazards which may result in injury or death.

ATTENTION!

Indicates notices of risks that can result in damage to the appliance.

NOTE!:

Emphasizes tips and other useful information in the operating manual.

CE Conformity declaration

Complies with CE Declaration of Conformity 2014/30/EU “Electromagnetic Compatibility Directive” and 2014/35/EU ‘Low Voltage Directive.’

The CE mark is present on the appliance type label. Area of Use Product model is designed for household use.

It is not suitable for business or industrial use.

In case of any failure arising from otherwise use, our authorized services will provide out of warranty service.

Intended Use

This device has been designed for light domestic use only. Using the appliance for other purposes will cause damage.

Appliance is used for cleaning of hard floors, carpets, upholstered furnitures, beds, furnitures, heating radiators and curtains.

Please use it only with Fakir original accessories. The appliance must not be used for any purpose other than these.

Unauthorized Use

WARNING!

• Children should not play with this appliance
- Cleaning and maintenance shall not be carried out by children without supervision.
- Keep the packing materials away from the children. Choking risk!
- Children younger than 3 years shall be kept away from the appliance if they are not supervised constantly.
- This appliance may be used by persons (including children) with limited physical, sensory or mental capabilities, or with limited experience and/or knowledge, only under the supervision of a person responsible for their safety, or in accordance with the instructions of that person.
- Children shall be supervised to ensure that they do not play with the appliance.
- This appliance shall not be used for play.
- Children older than 3 years and younger than 8 years may switch the appliance on and off only if they are under supervision or are informed of the safe use of the appliance and if they understand the hazards that may be caused by the appliance. In this respect, it is a prerequisite for the appliance to be in normal usage position or that it is installed properly.
- Children older than 3 years and younger than 8 years shall not plug the appliance to the electrical outlet, adjust the appliance, and do not perform any cleaning or maintenance operations.
- The appliance shall not be used without supervision.
- Electrical current

Safety matters

Read the user manual before using the appliance for

your and others' safety. Keep this manual in a safe place for future use.

If you pass the appliance on, pass on the manual too. Remove all the packages; however, keep them until you are sure that the device is working.

- Remove the plastic bag of the filter while replacing the filter. Otherwise, the device shall

EN

operate with noise.

• Do not operate the device without a filter, otherwise its efficiency shall be reduced and life cycle of the active carbon filter shall be shortened.
• A plastic smell may occur during the initial operation. We recommend you to ventilate the room for 2 or 3 hours. The smell shall be removed after one day of operation.
• Close the doors and windows while the device is operated.
• This device is not intended to be used as an external hood or fan during ventilation, vacuum cleaning or cooking.
• Ensure that you have plugged the device to an outlet with proper connections.
• Always keep and use the device on dry, fixed, flat and level surface.
• Allow clearance of 30 cm minimum at both sides and the rear of the device. Prevent damage to the device (on the air inlet or outlets in particular) with hard objects.
  • Always lift or carry the device by the holding points on both sides.
• Do not insert your finger or any object to the air inlet or outlet.
• Do not operate the device when a spray type insecticide is used in an environment you are present or where there are waste oil, lit fumes or chemical vapours.
  • Always unplug the device after any operation and before cleaning.
• Do not operate the device in a room where temperatures vary at a great extent as this may cause condensation inside the device.
• Do not use the device in rooms smaller or bigger than the recommended rooms.
• To avoid electromagnetic interference, keep the device at least 2 meters away from electrical appliances that use radio waves on the air such as TVs, radios or radio clocks.
• If the ambient air quality is poor (e.g. cigarette smoke, cooking smell), we recommend you to open the windows to improve air circulation while the device is operated. Device is suitable for household use only under normal operating conditions.
• Do not operate the device at wet surfaces or areas with high ambient temperature such as bathrooms, water closets or kitchens.
• This device does remove carbon monoxide (CO).
• Accuracy of the device may be reduced if the device is not operated for a long period of time. The device shall return to normal condition after being operated for one or two days. This device complies with all standards relevant with electromagnetic fields (EMF). The use of this device is safe under our scientific knowledge we have today when it is operated as intended and as per the instructions specified in this manual.

Unpacking

Unpack the appliance and before starting to use it check for damages and malfunctions. If there is any malfunction or damage to the equipment, do not use the appliance and get in contact with Fakir Authorized Service.

Repair works shall only be undertaken by Fakir authorized service.

Repairs that are inadequate or carried out by unauthorized personnel may pose harm to the user.

WARNING!

Never use a defective appliance.

NOTE!:

Keep the packaging for storage and future transports.

NOTE!:

Keep this user manual for future use.

Security Warnings

When utilizing an electrical appliance, the precautions below shall always be taken in order to prevent fire, shock or personal injuries

- Using electrical appliances may be dangerous, so please read the user's manual before using the appliance.

- Before plugging the appliance, into the power outlet ensure that the voltage matches the rated value specified in the type label.

- In an event where the appliance or the cord is damaged, do not use the appliance and contact a Fakir authorized service.

- If the appliance cord is damaged, it shall be replaced only by a Fakir authorized service centre.

• Before cleaning the appliance, unplug it.

- Make sure to unplug the appliance when it is not in use, or moving the appliance, or installing or removing parts, and while cleaning.

- Use the appliance only with its authentic accessories.

- Do not pull from the cord, use the plug to unplug the appliance.

- Never touch the plug/socket with wet hands.

- The children are not aware of the threats posed by the electrical appliance. Do not ever let children to play with electrical appliances. Special care must be exercised where children and vulnerable people are present.

- Do not try to place a metal or any other item inside the appliance.

• Installation shall be completed in align with the regulations and manufacturer instructions.

- Do not cover the appliance, otherwise it may cause the appliance to suffer significant damage or start fire!

- Do not spray pesticides or flammable aerosols on the appliance. It may damage the appliance.

- Do not place items at appliance air inlet or outlets. Otherwise it may damage the appliance and may cause electric shock risk.

- Do not place the air outlet right across little children. May cause sickness and affect the

EN

children's health.

• Before operating the appliance ensure the power cord is clean and plugged.
• If there is an unpleasant odour or an abnormal noise, immediately unplug the appliance.
• Do not fold the power cord or place heavy items on it. It may cause short circuiting.
• Do not wash the appliance with water. It may cause short circuiting and damage the appliance.
• Do not use the appliance near bathtubs, shower or near pools.
• Keep the unit away from walls, curtains and other flammable materials to protect against fire.
• Do not try to pry your fingers in through the operating appliance mesh.
• If the appliance will not be operated for extended periods of time or the user will keep it away, turn it off and unplug.
• To avoid electromagnetic interference keep the appliance away from appliances such as TV or radio at least 1 meter away.
• Do not expose appliance to direct sunlight.

WARNING!

Never use defective appliances. There is a risk of electrocution.

ATTENTION!

Keep heat sources and direct sunlight. High temperature may damage the appliance.

Box contents

Device 1 pc.

Device remote control 1 pc.

Cleaning brush 1 pc.

User manual 1 pc.

Service list 1 pc.

Device Descriptions

Technical Specifications

Voltage : 220-240V / 50-60 Hz

Power : 50W

Class: II

Ion output: 3x106 / cm3

Active oxygen output: ≤0.05ppm

UV Spectrum: 380nm±5, UVA

Dust collection rate: 99.97%

Air volume: 5.6M3/min

Intended use: 20-50M2

CADR Value: 300m3/h

Product Weight: 7.8 kg

Device dimensions: 340 * 290 * 540 mm

Noise level:

Quiet mode: 30dB

Low mode: 38dB

Medium mode: 45dB

High mode: 52dB

Turbo mode: 61dB

Control Panel

graph TD
    M[" Clean Cell"] --> UV["UV"]
    F[" Clean Cell"] --> L["88 Sleep"]
    L --> SLEEP["Sleep"]
    J[" Replace Filter"] --> LOCK["LOCK"]
    G[" Replace Filter"] --> I["GAS"]
    H[" Replace Filter"] --> DUST["DUST"]
    I --> AUTO["AUTO"]
    K[" Replace Filter"] --> Turbo["TURBO"]
    D --> Clock["Clock"]
    C --> Light["Light"]
    A --> Power["Power"]
    B --> Wind["Fire"]
    E --> Hourglass["Hourglass"]
    N[" Air Condition Indicator"] --> D
    N --> C
    N --> A
    N --> B
    N --> E

A : On / off button
B : Mode setting button
C: UV light on/off button
D: Timer button
E : Sleep mode
F: Cleaning indicator
G: Filter replacement indicator

H: Child lock

I : Mod and sensor indicator

J: Timer indicator

K: Level indicator

L: Sleep indicator

M: UV indicator

N: Remote control sensor

Remote Control

Air Indicator Light Colours

Green: Clean

Yellow: Low pollution

Orange: Medium pollution

Red: High pollution

Operation

Plug the device.

When the device is connected to the power source for the first time, all LED lights shall flash for 2 seconds.

1. TURNING ON/OFF

Press the On/Off button. You shall hear a beeping sound. The device starts to operate at automatic mode (AUTO).

Then it can be switched to the desired mode.

NOTE!:

Last contents set shall be cleared when the appliance is unplugged.

2. Mode

Press the mode button.

This device has 6 different fan modes.

Fan mode is switched as follows for each press on the button.

graph LR
    A["AUTO"] --> B["Silent"]
    B --> C["Low"]
    C --> D["Medium"]
    D --> E["High"]
    E --> F["Turbo"]

Automatic mode:

In this mode, the device automatically switches to other fan modes as per the pollution level sensed in the air by the sensor. Device switches to quiet mode when the air is cleaned.

Sleep mode:

When the sleep mode button is pressed, display switches to the lowest brightness level.

Device switches to the lowest operation mode and continues to run on quiet mode.

Press this button again to cancel this mode.

NOTE!:

Other buttons are not active in this mode. Cancel by pressing the sleep mode button first.

Turbo mode:

Activate the turbo mode to operate the appliance at maximum speed. You may switch to the maximum level, turbo mode indicator shall be displayed on the screen.

3. Child Lock:

Press the sleep mode button and on/off button for 3 seconds simultaneously to activate the child lock. LOCK sign shall be displayed on the screen.

You may also activate this mode by pressing the child lock key on the remote control.

Repeat the same procedure to cancel child lock.

NOTE!:

You may not use other buttons when the child lock is active. Cancel the child lock first to activate it.

4. Timer

The appliance is operated without the timer active.

By pressing the timer button, you may set the desired time (1-9 hours). Time set on the indicator panel shall be displayed on the screen. 88 sign indicates that the timer is not active.

When the timer is set, the appliance operates in countdown mode and when the time ends, it is turned off.

5.UV

When the button is pressed, UV shall be displayed on the screen and the UV mode shall be activated. When this button is pressed again, UV text shall disappear and the function shall be deactivated.

6. Cleaning Indicator CLEAN CELL REPLACE FIL

We recommend you to clean the device when CLEAN CELL message is displayed on the screen. Clean the dust collection unit, and then place it again on its seat. Turn on the appliance.

Keep the sleep mode and timer mode buttons pressed for 3 seconds. The CLEAN CELL message on the screen shall disappear.

graph TD
    A["+ Clock"] --> B["Reset"]
    C["Clean Cell"] --> D["88"]
    D --> E["GAS"]
    D --> F["DUST"]
    D --> G["AUTO"]
    D --> H["TURBO"]
    I["Clock Icon"] --> J["Lightbulb Icon"] --> K["Power Light Icon"] --> L["Star Icon"] --> M["Clock Icon"] --> N["Hand Icon"]
    style A fill:#f9f,stroke:#333
    style C fill:#f9f,stroke:#333
    style I fill:#ccf,stroke:#333
    style M fill:#ccf,stroke:#333

EN

7. Filter Replacement Indicator REPLACE FILTER

We recommend you to replace the filters when REPLACE FILTER message is displayed on the screen. After replacing the filters, insert them in their place.

Keep the sleep and mode buttons pressed for 3 seconds. The REPLACE FILTER message on the screen shall disappear.

8. Mod and Sensor Indicator

GAS or DUST warning is displayed on the screen when the sensors detect gas or dust passes through the appliance.

For the mode indicator, mode set (TURBO or AUTO) is displayed on the screen.

Cleaning and Maintenance

Maintenance of the Front Panel

Removal and Installation the Front Panel

Remove the device by pulling the cover towards you as shown in the figure and install it in the same way.

Illustration of a hand opening a refrigerator with a grid-out rack inside (no text or symbols)

Cleaning of the Front Panel

Wipe the front panel with a damp cloth. Clean air inlets with a brush.

Illustration of a hand cleaning a cylindrical container with a brush (no text or symbols)

Maintenance of the Pre-Filter

Removal and Installation the Pre-Filter

Raise the pre-filter by holding it from its holding lugs (Figure 2/C). Remove it from the tabs on the sides in the specified order.

After cleaning it, secure the filter first by installing the tabs (Figure 2) shown in their connection positions.

Technical diagram of a solar panel structure with labeled components (no text or symbols present)

Cleaning of the Pre-Filter

Clean the filter without damaging it under lukewarm or cold water. Attach them once you are sure they are dried.

Diagram showing a faucet spraying water onto a solar panel with a curved stroke (no text or symbols)

NOTE!:

Water temperature shall not exceed 40^ C.

Maintenance of the Dust Collection Unit

Removal and Installation of the Dust Collection Unit

Push the unit towards the housing (B) first. (Figure 1)

Pull the unit towards yourself. (Figure 2)

Apply the reverse procedure to install the components again after cleaning.

Cleaning of the Dust Collection Unit

Wash the unit with lukewarm water and detergent. Clean with a tooth brush or a soft brush.

Reinstall it once you are sure that it is dried.

Line drawing of a kitchen sink with a rack and spray bottle (no text or symbols)

NOTE!:

Water temperature shall not exceed 40^ C.

WARNING!

Do not damage the wires while cleaning the unit. Call Fakir Authorized Service if any wire is broken. Otherwise, this may cause a short circuit risk.

ATTENTION!

Appliance shall not operate if the unit is not installed properly. Make sure that it is installed properly.

Maintenance of the HEPA Filter/Active Carbon- TIO2 Filter

Removal and Installation of the HEPA Filter/Active Carbon- TIO2 Filters

Pull the filters towards you using the threads on the sides.

Install the filters by holding from the sides to replace them.

NOTE!:

Make sure that you have placed the filters correctly. Do not install reversely. Install so that the white side of the HEPA filter faces you.

Technical line drawings of two different air purifiers with ventilation grilles and cooling fins (no text or symbols)

Cleaning and Replacement of the HEPA Filter/Active Carbon- TIO2 Filters

EN

We recommend you to replace the filters when the colour of the filters becomes gray or when REPLACE FILTER warning is displayed on the screen.

You may clean the TIO2 filter with a vacuum cleaner.

NOTE!:

Recommended cleaning and replacement interval for HEPA Filter /Active Carbon -TIO2 Filters is 6 months.

Cleaning the Sensors

We recommend you to clean them using a piece of cloth or a brush. Otherwise, its sensing level is reduced.

NOTE!:

Recommended cleaning interval is 1 to 2 months.

Technical line drawing of a roof structure with a small component and directional arrows (no text or symbols)

Line drawing of a hand holding a small object inside an open electrical box (no text or symbols visible)

Cleaning the Main Body of the Appliance

We recommend you to clean carefully with a dry and soft cloth.

Be very careful not wet UV LEDs.

Line drawing of a hand cleaning a circular component inside a device casing (no text or symbols)

Storage

• If the appliance will not be used for an extended period of time, pack the appliance.
  • After packing, place it at a dry and well ventilated place.

Troubleshooting

Before you call Customer Service, check whether you can correct the problem/ fault yourself. For this purpose,

see the “TROUBLESHOOTING” section. If you cannot resolve the problem/failure, Please call the customer service. Before calling please make ready the model name, and product serial number. You can find this information on the TYPE LABEL of your product. Help Line:

([phone].

Problem Remedy
Selected function/time mode does not operate	Appliance may be in stand-by mode or off.
Appliance doesn't operate.	There may be a connection problem. Check if the appliance is plugged in to the outlet correctly.
	Appliance may not be turned on. Press the on/off button.
	Filters or front panel may not be installed correctly.Install the filters or the front panel again.
	Appliance may be faulty if it does not operate after you have performed all the inspections specified above.Unplug the appliance and take it to a Fakir dealership or a Fakir authorized service center.
Cleaned air does not come out from the air outlet easily	The pre-filter may be blocked. Clean the pre-filter (see ‘Cleaning and maintenance’ section).
	Clean the filters (see ‘Cleaning and maintenance’ section). If this does not work, unplug the appliance and take it to a Fakir dealership or a Fakir authorized service center.
Odours are not removed properly	You may be using the appliance in an environment with a poor air quality. In such a case, reinforce air circulation by opening the windows.
	You may be using the appliance in a room larger than the proper sized room. Place the appliance on a smaller room. Recommended room sizes are 20m2 to 50m2.
Even if the appliance is plugged and on, fans do not operate	Appliance may be faulty. Turn off and unplug the appliance. Take the appliance to a Fakir dealership or a Fakir authorized service center.
Appliance causes abnormal noise (swishing or cracking sounds)	The pre-filter may be blocked. Clean the pre-filter (see ‘Cleaning and maintenance’ section).
	You may have forget to remove the plastic packaging of the new filter.Remove the plastic packaging before switching on the appliance again.
	Air inlet or outlet may be blocked by an external object. Remove the object blocking the air inlet or outlet.
	Appliance may be faulty. Turn off and unplug the appliance. Take the appliance to a Fakir dealership or a Fakir authorized service center.
A smell of burnt rubber occurs	Appliance may be faulty. Turn off and unplug the appliance. Take the appliance to a Fakir dealership or a Fakir authorized service center.

Recycling

Ensure that the dead batteries are disposed of in accordance with local laws and regulations. The symbol on the battery and packaging indicates that the battery delivered with the product should not be considered as household waste. By ensuring that the batteries are disposed correctly, you can contribute to the prevention of potential damage to the environment and human health due to improper disposal of the batteries.

Dispose of the appliance according to the environmental regulations determined for electronic appliances in your country. Electrical waste must not be disposed of together with household waste. Dispose of the appliance in the designated garbage cans for electrical waste.

The packaging of the appliance consists of recycling-capable materials. Throw out them in suitable recycling bins. For recycling advices, contact your municipal officers or your authorized dealer.

You can put used dust bags and filters in general trash cans.

This appliance is compatible with 2012/19/EU AEEE directive.

Dispatch

Carry the appliance in the original package or a similar, well-padded package to prevent damage to the appliance.

NOT / NOTES

Illustration of a hand opening a refrigerator with a grid-patterned interior (no text or symbols)

Illustration of a hand cleaning a large cylindrical container with a brush (no text or symbols)

Ön Filtrenin Bakımı

TR

Diagram showing a faucet pouring liquid into a solar panel with a flame symbol (no text or labels)

NOT!

Line drawing of a kitchen sink with a water dispenser and a rack-mounted device (no text or symbols)

NOT!

Technical line drawings of two different air purifiers with ventilation grilles and control knobs (no text or symbols)

Simple line drawing of a roof structure with a central component and two corner connectors (no text or symbols)

Line drawing of a hand inserting a small component into an open device (no text or symbols)

Line drawing of a hand cleaning a circular fan component inside a device (no text or symbols)

Saklama

Rights to make changes are reserved.