Zephir ZCRB1200 - Heating

ZCRB1200 - Heating Zephir - Free user manual and instructions

Find the device manual for free ZCRB1200 Zephir in PDF.

📄 14 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Zephir ZCRB1200 - page 8
View the manual : English EN Italiano IT
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Zephir
Model ZCRB1200
Category Heating
Product Type Portable Electric Heater
Power Supply 220-240V ~ 50Hz
Power Consumption 600 – 1200W
Heating Elements 2 tubes
Heat Output (Nominal) 1.2 kW
Heat Output (Minimum) 0 kW
Heat Output (Maximum Continuous) 1.2 kW
Controls Front panel switches (I, II) and Swing button
Oscillation Automatic oscillation (Swing function)
Safety Features Tip-over switch, overheat protection, thermal cut-out
Assembly Required Yes – base attachment with screws
Cleaning Unplug and cool down; wipe grids with soft cloth; do not use abrasive cleaners
Maintenance Regular cleaning of air inlets and outlets
Recommended Clearance At least 1 meter from combustible materials (front, sides, rear)
Protection Rating Do not use in bathrooms or near water
Contact Westim S.p.A, Via Roberto Bracco 42/E, Rome, Italy

Frequently Asked Questions - ZCRB1200 Zephir

How do I assemble the heater base?
Remove the screws from the bottom of the main unit, insert the cable into the base compartment, place the body onto the base, secure with the two mounting screws, then guide the cable through the clamp.
What are the power settings?
The heater has two power levels: I (low, 600W) and II (high, 1200W). Use the front switches to select.
How does the oscillation work?
Press the Swing button on the front panel to activate or deactivate automatic left-right oscillation.
What safety features does this heater have?
It includes a tip-over switch that stops operation if the unit falls, and an overheat protection that shuts off if internal temperature exceeds safe limits.
Can I use the heater in a bathroom?
No, never use the heater near water, baths, showers, or swimming pools to avoid electric shock.
How should I clean the heater?
Unplug and let cool completely. Wipe the grids with a soft cloth. Do not use abrasive or chemical detergents. Ensure air inlets are not blocked.
What is the minimum clearance from flammable materials?
Keep at least 1 meter (3 feet) away from furniture, curtains, clothing, and other combustibles.
My heater stopped working – what could be wrong?
Check if it tipped over (tip-over switch activated), or if it overheated (wait for it to cool and restart). If problem persists, contact service center.
Can I use an extension cord?
Avoid extension cords as they may overheat. If necessary, use a heavy-duty cord rated for at least 10A and fully unrolled.
What does the 'DO NOT COVER' symbol mean?
It warns that covering the heater can cause overheating and fire. Never place clothes, towels, or any objects on the unit.

User questions about ZCRB1200 Zephir

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual ZCRB1200 - Zephir and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZCRB1200 by Zephir.

USER MANUAL ZCRB1200 Zephir

natural_image Exterior view of a portable electric heater with grid-patterned casing (no text or symbols visible)

MANUALE D'ISTRUZIONI

natural_image Exterior view of a modern office building (no signage)

INSTRUCTION MANUAL

When using electrical appliances, basic safety precautions should be followed:

  1. This product is not suitable for well insulated for well insulated spaces or occasional use.
  2. Please read these instructions carefully before using the appliance.
  3. Children of less than 3 years should be kept away unless continuously supervised.
  4. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
  5. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  6. CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
  7. Check that your mains voltage corresponds to that stated on the rating plate of the appliance.
  8. Keep out of reach of children or incompetent persons.
  9. From time to time check the cord for damages. Never use the appliance shows any signs of damage but have if checked and repaired by a competent qualified service. Should the cord be damaged, it must be replaced by a competent qualified service.
  10. Only use the appliance for domestic purposes and in the way indicated in these instructions.
  11. Never immerse the appliance in water or any other liquid for any reason whatsoever. When cleaning the appliance, refer to the instructions in the paragraph "Cleaning and care" because the water penetration through the openings can be very dangerous for your appliance.
  12. Never use the appliance near hot surfaces.
  13. Before cleaning and when you do not use the appliance, always unplug the appliance from the power supply. Do not attempt to remove the plug from the wall socket with wet hands.
  14. Never use the appliance outside and always place it in a dry environment.
  15. Never use accessories that are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
  16. Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.
  17. Stand the appliance on a stable surface so that it cannot fall.
  18. Do not place the appliance under a power socket. The power socket must not be in the hot airflow of the appliance.
  19. Always position the heater in such a way that inflammable materials (such as curtains) cannot be ignited. Ensure at all times that the unit is placed solidly on its base. Make sure that the air inlet and outlet openings are not blocked. To avoid any risk of fire, do not cover the heater (ex. With clothes).
  20. Warning: Do not operate the heater near baths, showers, washbasins, swimming pools or any other water container. It must be impossible to reach the commands of your appliance when you are in contact with water.
  21. The temperature of the grids may be very high when the appliance is in use. Avoid contact with the skin. Never use the appliance near inflammable or explosive materials.
  22. Do not insert any objects through the grille or into the interior of the appliance.
  23. Do not operate the heater with a damaged cord or plug. been dropped or damaged in any manner.
  24. Before cleaning and maintenance disconnect the appliance from electrical socket
  25. In case of abnormal situation turn off the appliance immediately and contact the dealer or the Service.
  26. It is absolutely forbidden to remove or repair the unit: risk of electrical shock; contact your dealer or Service Center. Do not operate the heater with a damaged cord or plug. been dropped or damaged in any manner.
  27. Before cleaning and maintenance disconnect the appliance from electrical socket
  28. In case of abnormal situation turn off the appliance immediately and contact the dealer or the Service.
  29. It is absolutely forbidden to remove or repair the unit: risk of electrical shock; contact your dealer or Service Center.
  30. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire.
  31. Always maintain your distance from the product while it is in use to avoid serious burns and other personal injury.

  32. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or personal injury.

  33. Keep combustible materials, such as furniture, cushions, paper, clothes, and curtains at least three feet (1 meter) from the front of the heater and keep them away from the sides and rear.
  34. "ATTENZIONE:NON COPRIRE (DO NOT COVER): means that to avoid overheating, never cover the product or obstruct the air inlets.
  35. Make sure the power supply corresponds to one on the rating label.
  36. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
  37. Do not allow children to operate or play with the appliance.
  38. Unplug from outlet when not in use, or before putting on/taking off parts.
  39. Do not use with damaged electrical cord or plug.
  40. If damaged or malfunction occur, refer to an authorized service center only.
  41. Never pull the appliance by power cord.
  42. Do not use the appliance for other than intended household use.
  43. Do not place the warmer under the fixed power outlet.
  44. Never the warmer when the power wire, plug or the body is damaged.
  45. When user need going out or not being used for a long time, the plug should be disconnect from the power outlet.
  46. Do not cover or put anything on the heater and don't use it nearby the bed when going out or sleeping so as to avoid risk of fire.
  47. Put the heater in a place where children can't reach when using or storage.
  48. Never turn the "I" or "II" switch when the fan-motor can't work normally.
  49. Do not operate the warmer including switches, plugs and outlets with wet hands.
  50. Do not use the warmer in the bathroom or swimming pool.
  51. Children should be supervised to ensure that they do not play with the appliance

COMPONENTS

  • Main unit
  • Base
  • Mounting screws
  • Tip – Over Switch
  • Guide power cable
  • Power cord

ASSEMBLY

  • Assemble the body to the base according to the steps described below :
  • Remove the screws from the bottom of the main unit.
  • Insert the cable along the compartment located at the center of the base and assemble the body to the base.
  • Secure the body to the base using the two mounting screws removed earlier.
  • Pass the cable along the guide and secure it with the clamp.

OPERATION

  • Plug the power cord into the outlet.
  • Check that the socket has a capacity of 10A at least.
  • Select the speed according to the switches on the front panel.
  • Press the SWING button to activate or deactivate the automatic oscillation.

SAFETY DEVICE

- This unit is provided with a safety device which stops the delivery of hot air in case the main unit is damaged or fallen to the ground. The device is placed at the base of the unit.

MANTENANCE

  • The unit needs to be cleaned regularly.
  • Before each cleaning cycle, make sure the power cord is unplugged from the electrical outlet and that the unit has cooled down completely
  • Clean the grids from dust with a soft cloth.
  • Do not use abrasive or chemical detergent that can spoil the main unit.

TECHNICAL SPECIFICATIONS

VoltagePowerHeating Elements
220-240V~50Hz600 – 1200W2 tubi

INFORMATION REQUIREMENTS FOR LOCAL SPACE HEATERS

ItemSymbolValueUnitItemUnit
Heat outputType of heat input, for electric storage local space heaters only (select one)
Nominal heat output P_nom 1,2KWmanual heat charge control, with integrated thermostatno
Minimum heat output (indicative) P_min 0KWmanual heat charge control with room and/or outdoor temperature feedbackno
Maximum continuous heat output P_max,c 1,2KWelectronic heat charge control with room and/or outdoor temperature feedbackno
Auxiliary electricity consumptionfan assisted heat outputno
At nominal heat output el_max N/AKWType of heat output/room temperature control (select one)
At minimum heat output el_min N/AKWsingle stage heat output and no room temperature controlno
In standby mode el_SB N/AWTwo or more manual stages, no room temperature controlYes
with mechanic thermostat room temperature controlno
with electronic room temperature controlno
electronic room temperature control plus day timerno
electronic room temperature control plus week timerno
Other control options (multiple selections possible)
room temperature control, with presence detectionno
room temperature control, with open window detectionno
with distance control optionno
with adaptive start controlno
with working time limitationno
with black bulb sensorno
Contact details infoWestim S.p.A Via Roberto Bracco 42/E, Rome-Italy

www.uniorservice.com

WESTIM S.p.A.

Via Roberto Bracco 42/E

00137, Roma

Tel. 06 8720311

Italiano

Zephir ZCRB1200 - Italiano - 1

Disposal of old electrical & electronic equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or in its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Français

Zephir ZCRB1200 - Français - 1

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Zephir

Model : ZCRB1200

Category : Heating