SK12 - Juicer Eldom - Free user manual and instructions
Find the device manual for free SK12 Eldom in PDF.
| Brand | Eldom |
| Model | SK12 |
| Product Type | Juice extractor |
| Power | 400 W |
| Voltage | 230 V ~ 50 Hz |
| Speed Settings | 2 speeds: low (1) and normal (2) |
| Maximum Continuous Operation | 2 minutes |
| Required Break After Operation | 1 minute |
| Safety Features | Safety clamp, lid interlock, anti-drip valve |
| Material | Plastic body, stainless steel filter |
| Dishwasher Safe Parts | All detachable plastic parts (top rack recommended) |
| Pulp Container | Removable |
| Juice Jug | Included |
| Function | Extracts juice from fruits and vegetables |
Frequently Asked Questions - SK12 Eldom
User questions about SK12 Eldom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Juicer in PDF format for free! Find your manual SK12 - Eldom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SK12 by Eldom.
USER MANUAL SK12 Eldom
fot. 1
natural_image
Close-up of a black thermosink with a metallic handle and silver ring (no visible text or symbols)OBSŁUGA
- Pusher
- Feeding tube
- Lid
- Filter
- Juicer collector
- The spout with the valve
- Pulp container
- Control knob
- Safety clamp
- Juice jug
Technical data
- power: 400W
- mains voltage: 230V \~ 50Hz
- maximum time of continuous operation: 2 minutes
- break before continuation of operation: 1 minute

HOW TO USE THE APPLIANCE
The juicer is equipped with the spout with anti-drip valve.
Read these instructions for use carefully before using the appliance - wash all detachable parts, - assemble the appliance
MONTAGE
Place the juice collector into the appliance and place the pulp container into the appliance by tilting it forwards slightly. Insert the top end first and then push home the bottom end Put the filter in the juice collector and hold the lid over the filter and lower it into position

natural_image
Close-up of a black thermosink with a metallic handle and silver frame (no visible text or symbols)Snap the safety clamp onto the lid to lock it into place ('click') and slide the pusher into the feeding tube by aligning the groove in the pusher with the small protrusion on the inside of the feeding tube.
Make sure the safety clamps are locked into the position on either side of the lid.
Place the juice jug under the spout.
Using the appliance
The appliance will only function if all parts have been properly assembled and the lid has been properly locked in place with the clamp.
- always operate the product on a flat, stable surface
- put the plug in the wall socket
- wash the fruit and/or vegetables and cut them into pieces that fit into the feeding tube
- make sure the juice jug has been placed under the spout.
- switch the appliance on by turning the control knob to setting 1 (low speed) or 2 (normal speed). Speed 1 is especially suitable for soft fruits and vegetables such as watermelons, grapes, tomatoes, cucumbers and raspberries. Speed 2 is suitable for all kinds of fruits and vegetables.
- put the pre-cut pieces in the feeding tube and gently press them down towards the rotating filter by means of the pusher.
- After processing part of the products and turning the appliance to an off position with the switcher (8) (position "0") you can raise the spout (6) preventing the outflow of the remaining juice. Before turning on the device next time, make sure that the spout is lowered.
While you are preparing juice, you can empty the pulp container by switching the appliance off and carefully removing the pulp container.
Make sure you observe the maximum time of continuous operation of the appliance. Exceeding the time limit and failing to provide appropriate breaks during the operation of the appliance may cause irreparable damage to the engine.
Do not exert too much pressure on the pusher, as this could affect the quality of the end result and it could even cause the filter to come to a halt.
Never insert your fingers or an object into the feeding tube.
After you have processed all ingredients and the juice flow has stopped, switch the appliance off and wait until the filter has stopped rotating.
TIPS
- Use fresh fruit and vegetables, as they contain more juice, pineapples, beetroots, celery stalks, apples, cucumbers, carrots, spinach, melons, tomatoes, pomegranates, oranges and grapes are particularly suitable for processing in the juice extractor.
- You don't have to remove thin peels or skins. Only thick peels, e.g. those of oranges, pineapples and uncooked beetroots need to be removed.
- When preparing apple juice, remember that the thickness of the apple juice depends on the kind of apple you are using. The juicer the apple, the thinner the juice. Choose a kind of apple that produces the type of juice you prefer.
- Apple juice turns brown very quickly. You can slow down this process by adding a few drops of lemon juice.
- Fruits that contain starch, such as bananas, papayas, avocados, figs and mangoes are not suitable for processing in the juice extractor. Use a food processor, blender or bar blender to process these fruits.
- Drink the juice immediately after yo have extracted it. If it is exposed to air for some time, the juice will lose its taste and nutritional value.
- To extract the maximum amount of juice, always press the pusher down slowly.
CLEANING
The appliance is easier to clean if you do so immediately after use.
Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance. All detachable parts are dishwasher-safe.
Place the detachable plastic parts on the top tray of the dishwasher. Make sure they are placed well away from the heating element.
-
Switch the appliance off, remove the plug from the wall socket and wait until the filter has stopped roating.
-
Remove the dirty parts from the motor unit. Dissassemble the appliance in the following order:
- Remove the pulp container
- Remove the pusher
- Open the clamp
- Remove the lid
-
Remove the juice collector together with the filter
-
Clean these parts with a cleaning brush in warm water with some washing-up liquid and rinse them under the tap.
-
Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rinse it under the tap.
TROUBLESHOOTING
This chapter summarises the most common problems you could encounter with your juice extractor. Please read the different sections for more details. If you are unable to solve the problem, please contact your customer care centre in your country.
| PROBLEM SOLUTION | |
| The appliance does not work | The appliance is equipped with a safety system. It won't work if the parts have not been mount properly. Check whether the parts have been assembled in the right way, but switch off the appliance before you do so. |
| The motor unit gives off an unpleasant smell the first few times the appliance is used. | This is not unusual. If the appliance continues to give off this smell after a few times, check the quantities you are processing and the processing time. |
| The appliance makes a lot of noise, gives off an unpleasant smell, is too hot to touch, gives of smoke etc. | Switch the appliance off and unplug it. Turn to the nearest service centre or your dealer for assistance. |
| The filter is blocked. | Switch the appliance off, clean the feeding tube and the filter and process a smaller quantity. |
| The filter touches the feeding tube or vibrates strongly during processing. | Switch the appliance off and unplug it. Check if the filter has been properly placed in the juice collector. The ribs in the bottom of the filter should fit properly onto the driving shaft. Check if the filter is damaged. Cracks, crazes, a loose grating disc or any other irregularity may cause malfunction. |
SAFETY INSTRUCTIONS
- please acquaint precisely with whole of this instruction before using the blender for the first time,
- the power cable must be plugged in the socket with parameters the same as those given in that instruction manual,
- do not immerse the cable or the appliance in water,
- only intended for household use,
- do not use the iron outdoors,
- do not leave children unattended in the vicinity of the appliance,
- before switching the appliance on, make sure that all of its elements are appropriately assembled,
- always unplug the appliance after operation,
- always operate the product with the cover in place
- the lid lock can be released only when the appliance is switched off and the filter is not rotating,
- do not remove the pulp container (7) when the appliance is in operation,
- the device is not intended for use by people (including children) with limited physical, sensorial or mental capabilities unless they are supervised by person responsible for their safety,
- be careful with the knives as they are very sharp. Act with due caution when installing and removing the knives,
- do not touch the appliance with wet hands,
- always pull the plug of the socket before cleaning,
- do not use the juicer when the rotating strainer is damaged,
- do not exceed the maximum time of continuous operation of the appliance,
- Never reach into the feeding tube with your fingers or an object while the appliance is running. Only the pusher is to be used for this purpose.
- do not operate the juicer for more than 40 seconds at a time when juicing heavy loads and let it cool down sufficiently afterwards.
- never use the if the supply cord is damaged. If found damaged in any way, consult the producer's authorized service centre. The list of service centres is to be found in the appendix and on www.eldom.eu,
- refer servicing to an authorized service centre. Modifying the appliance or using spare parts or elements other than the original ones is forbidden and can expose the user to hazard
- the appliance can be used only with the originally included accessories
ENVIRONMENT PROTECTION
- the device is made of materials that can be reused or recycled
- it should be handed to the special collection point,
that deals with collection and recycling of electronic and electric devices,
WARRANTY
- only intended for household use,
- it cannot be used for commercial purposes
- the warranty loses validity in case of inappropriate use,
obrázek 1
Používání zařízení
natural_image
Close-up of a black thermosink with a metallic handle and label 'obrázek 2' (no other text or symbols visible)Bild 1
GERÄTEGEBRAUCH
natural_image
Close-up of a black and silver thermosink bottle with a metal rack, labeled 'Bild 2' in the corner (no other text or symbols visible)MONTAGE
фот. 1