10011117 - Headphones Auna - Free user manual and instructions

Product Type	Bluetooth Stereo Headset
Model	10011117 (Auna Air)
Bluetooth Version	Bluetooth V2.1+EDR
Bluetooth Profiles	HSP, HFP, A2DP, AVRCP
Effective Range	Up to 10 meters (Class 2)
Dimensions (W×H×D)	162 × 153.5 × 32 mm
Weight	Approx. 103 g
Input Power	DC 5V / 180mA
Charging Time	Approx. 2.5 hours
Working Time (Music)	Up to 10 hours
Working Time (Talk)	Up to 11 hours
Standby Time	Up to 250 hours
Battery Type	Rechargeable lithium-ion (built-in)
Microphone	Built-in
Controls	Multifunction button, Volume +/-, Next/Previous track
Call Functions	Answer, end, reject, redial, mute, switch call
Music Control	Play/pause, next/previous track, volume
Multi-pairing	Up to 2 devices simultaneously (HFP + A2DP)
Automatic Connection	Reconnects to last paired device on power on
LED Indicators	Red (charging, low battery), Blue (pairing, connected)
Wearing Style	Over-ear with adjustable headband (left/right marked)
Compliance	FCC Part 15
Cleaning and Maintenance	Wipe with dry cloth; avoid liquids and abrasives
Safety Warning	Excessive volume may cause hearing loss

Frequently Asked Questions - 10011117 Auna

Why does the red light blink twice every 20 seconds?

The battery is low and needs to be recharged. Please charge the headset using the included USB cable or a travel charger.

What should I do if the red light does not turn on when charging?

Ensure the charger is properly connected to the headset. If the battery has been deeply discharged, charge for at least 30 minutes until the red light appears.

What is the effective range between the headset and my phone?

The maximum effective range is 10 meters (33 feet) under ideal conditions. Obstacles like walls may reduce the range.

Why can’t my phone find the headset during Bluetooth search?

Make sure the headset is in pairing mode (red and blue LEDs flashing). Check that both devices are within 1 meter of each other and that Bluetooth is enabled on your phone.

Why is there no sound from the headset?

Verify the headset is powered on, the volume is not muted or too low, and it is correctly connected to your device. Also check that the distance is within range.

How can I improve unclear voice during calls?

Make sure your phone has a strong signal and that the headset is within the 10-meter range. Avoid sources of interference such as other electronic devices.

Why can’t I control music playback (pause, skip) from the headset?

This function requires your Bluetooth device to support the AVRCP profile. Check your device’s specifications. If supported, ensure the headset is connected correctly.

How do I reset the headset to factory defaults?

With the headset off, press and hold the MFB and Volume + buttons simultaneously for about 3 seconds. Release when you hear two tones and see a red LED. All pairing information will be deleted.

Can I connect the headset to two devices at the same time?

Yes, the headset supports multi-pairing: one device for HFP (phone calls) and another for A2DP (music). To set up, first pair with the A2DP device, then pair with the HFP device.

What does the LED indicator behavior mean?

Red LED on: charging; off: charged. Alternating red/blue: pairing mode. Blue blink once every 2 seconds: not connected. Blue blink twice every 4 seconds: HFP or A2DP connected. Blue blink thrice every 2 seconds: both HFP and A2DP connected. Blue solid then off: conversation. Red blink twice every 20 seconds: low battery.

USER MANUAL 10011117 Auna

Abstract white geometric logo on black background (no text or symbols)

auna

multimedia

Bluetooth Kopfhörer

Black hardcover headband with white earband and black plastic case (no text or symbols visible)

10011115

10011116

10011117

10011118

Black hardcover headband with earbuds and buttons (no text or symbols visible)

Close-up of a black hardcover with attached buttons and a magnified inset showing the internal mechanism (no text or symbols visible)

Anruf-Funktionen

Simple line drawing of a trash bin with an X mark symbol (no text or labels)

Auna Air is a stereo Bluetooth headset. It supports the following Bluetooth profiles: HSP, HFP, A2DP & AVRCP

You can enjoy music wirelessly by using the Auna Air. Steps as following:

1. Pairing with the Bluetooth mobile phone and PDA which support HFP.
2. Answer, end and reject call from the headset
   • Redial last number
3. Adjust the volume
4. Switch the conversation between the headset and the mobile phone

5. Microphone mute

6. Pairing with Bluetooth music devices and Bluetooth transmitter which support A2DP

- Enjoy music wirelessly

- Adjust the volume

- Remote control the function of pause/play

- Remote control last/next song

1. Easy to switch between conversation and music, you will not miss the incoming call during listening to music.

2. Automatic connecting with the last paired device when turn on the headset.

Note:

Even though the paired device and headset support the same Bluetooth profiles, the functions may be different due to the specification difference of the paired devices.

Before using

Overview

1. Retractable string
2. < key :last song

3. key : next song

4. LED Indicator
5. Multifunction button (MFB):
   Switch on/off the headset, answer, end and reject call, microphone mute, redial last number, pause and play
6. • key: volume up
7. • key: volume down
8. Charging port
9. Built-in microphone

Black hardcover headband with white buttons at the bottom (no visible text or symbols)

First time charging

Before you use this Bluetooth headset, please charge the battery of Auna Air fully.

Next time

When you hear three warning tones of "DONG" every 20 seconds, at the same time, the red light blinks two times. It means the battery is low power and need to be charged. There are two types of charging as below:

A. Charging the battery with travel charger

Step1: Plug the travel charger into standard USB power outlet.

Step2: Connect the travel charger with the charging port of the headset. When the red light is on, the headset is charging.

When the red light is off, the headset is charged fully. It takes about 2.5 hours to charge the headset fully.

B. Charging the battery with USB cable

Step1: Insert USB charging cable into USB port of PC.

Step2: Connect charging cable with the charging port of headset. When the red light is on, the headset is charging.

When the red light is off, the headset is charged fully. It takes about 2.5 hours to charge the headset fully.

Note:

Choosing travel charger or USB cable depends on different countries or areas and actual demands.

How to use

Switching on/off

Function Operation LED indicator Indication tone
Switch on	Press the MFB button for 3-5 seconds, and release it till the blue LED is on	Blue LED is on for 1 second	A long “DI” tone
Switch off	Press the MFB button for 3-5 seconds, and release it till the red LED is on	Red LED is on for 1 second	A long “DI” tone

Note:

In order to save power, the headset will automatically switch off if no devices can be connected within 5 minutes after switching on.

Pairing the headset with Bluetooth devices

How to enter pairing mode

Function Operation LED indicator Indication tone
Enter pairing mode	Make sure the headset is off. Press and hold MFB button for 7-9 seconds, and release it till the red and blue LEDs blink alternately	Red and blue LEDs blink alternately.	Two “DU” tones

Note:

The pairing mode will last 2 minutes, If the headset still can't pair with any Bluetooth devices after 2 minutes, it will switch into standby mode automatically.

Pairing the headset with Bluetooth mobile phone

Please make sure your mobile phone has Bluetooth function that can be used. Specific pairing procedures may vary with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows:

1. Please keep the headset and mobile phone in the range of 1 meter when pairing.
2. Make the headset enter into pairing mode (Please refer to "how to enter into pairing mode").
3. Start the Bluetooth function of mobile phone and search the Bluetooth devices. After searched, select "Auna Air" in the Bluetooth device list.
4. According to indication, enter password or PIN No: "0000", and press the key of "Yes" or "confirmed".
5. After successful pairing, select "Auna Air" in the Bluetooth device list, and press "connect".
6. After successful connecting, the blue LED of the headset quickly blinks twice or three times every 4 seconds.

Notes:

• If the pairing is not successful, please switch off headset firstly, and then re-pair according to the step 1\~6 mentioned above.
• After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when use next time. The headset can remember 8 paired devices, when paired devices exceed 8 paired devices, the first one will be replaced.
• If you want to pair the headset with other devices, please pair it with the new device according to steps 1\~6 mentioned above.

Pairing the headset with Bluetooth transmitter

You can enjoy music wirelessly through connecting headset with stereo Bluetooth transmitter. Here take BTT001 (single sale) iPod general Bluetooth transmitter for example. Pairing steps as follows:

1. Keep the Bluetooth transmitter and headset in the range of 1 meter when pairing.
2. Make the headset enter into pairing mode (refer to "How to enter into pairing mode).
3. Turn on the Bluetooth transmitter. It will search Bluetooth device automatically and start pairing.
4. When the headset requests PIN No, the Bluetooth transmitter need to respond "0000" automatically.
5. After successful pairing and connecting, the blue LED of headset quickly blinks twice every 4 seconds.

Notes:

1. The pairing password of Auna Air is "0000", so, the headset can't pair with the Bluetooth transmitter which pairing password is not "0000".
2. If the pairing is still not successful after trying several times, please refer to your Bluetooth transmitter manual carefully.

Multi-pair

The headset can connect with two devices at most. One is the mobile phone with HFP profile, another is the devices with A2DP profiles. If you want to finish the pairing of several Bluetooth devices, please refer to the following steps:

1. Firstly, pair the headset with Bluetooth transmitter (refer to "pairing headset with Bluetooth transmitter).
2. Switch off the Bluetooth transmitter.
3. Pair and connect the headset with the Bluetooth mobile phone (refer to "pairing headset with Bluetooth mobile phone").
4. Restart Bluetooth transmitter, it will connect with headset automatically.

Notes:

• After successful pairing with several Bluetooth devices, the paired devices will remember each other. Unless pairing information is deleted because of new pairing, otherwise make mobile phone and headset set up hands free connection next time, and re-start the Bluetooth transmitter, then the connection of several devices can be performed.
• For the mobile phone which supports the HSP and A2DP at the same time. It may set up connection with HSP and A2DP simultaneously. At this time, start Bluetooth transmitter may not connect with the headset again.

Re-connecting to a Bluetooth device

1. Automatic connecting

Every time the headset is switched on. It will connect to last connected device automatically.

2. Manual connecting to last connected HFP device

When the headset is in standby mode and doesn't connect to any HFP devices, short press MFB button twice, it will connect to last connected HFP device automatically.

3. Manual connecting to last connected A2DP device

When the headset is in standby mode and doesn't connect to any A2DP devices, short press > (next song) button, it will connect to last connected A2DP device automatically.

Notes:

• Before connecting to a Bluetooth device, please turn on the Bluetooth device's Bluetooth function.
• On some Bluetooth devices, take some Nokia mobile phones for example, you have to allow automatic connecting in the mobile phone's settings. Please refer to your mobile phone's manual for further information.

Wearing the headset

The string of this headset is retractable, please adjust according to the actual use. Logo "L" of headset represents left ear, Logo "R" of headset represents right ear. Please wear the headset according to the indication of the Logo.

Close-up of a black hardcover with attached buttons and a magnified inset showing the internal components (no text or symbols visible)

Making calls with the headset

Function Status of headset Operation
Redial last number Stand	by mode Short press	MFB twice quickly
Volume up Conversation	mode Short press or long press + key
Volume down Conversation	mode Short press or long press - key
Answer calling Ringing Short press MFB
Reject calling Ringing		Press and hold MFB for 2s, and release it till hearing indication sound
End calling Conversation	mode Short press MFB
Microphone mute Conversation mode Quickly press the MFB twice
Cancel mute	Conversation mode (mute)	Quickly press the MFB twice

Warning:

Excessive pressure from headphones can cause hearing loss.

Notes:

• Not all the mobile phones support all the functions listed above. Please refer to the instruction of your mobile phone.
  • Some functions and indication tones may vary with different mobile phones.
• When the volume is adjusted to max or min, you will hear a indication tone.
• For some mobile phones, when you press the key of accepting on the phone, the conversation will be sent to the mobile phone. At this time, you can switch the call to headset by using the conversation switch button or through operating on the mobile phone. Please refer to the instruction of your mobile phone for further information.

Playing music

When the headset connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music through headset wirelessly.

Function Status of headset	Operation
Volume up Playing music	Short or long press + key
Volume down Playing music	Short or long press - key
Pause	Playing music	Short press MFB
Play	Pausing	Short press MFB
Last song	Playing music	Short press < key
Next song	Playing music	Short press> key

Notes:

• For some of mobile phones, when they are playing music, the music will transmit to the speaker of mobile phone, you have to choose "transmit the sound through Bluetooth" in the "setting" of music play interface, and then choose "Auna Air" in the device list, the music will be transmitted to the headset. Please refer to the instruction of your mobile phone for further information.
• When the volume of headset is adjusted to max. or min. you will hear an indication tone.
• Remote control the function of last song/next song/pause/revert, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter for further information.

Restoring to factory defaults and resetting

Make sure the headset is off, press and hold MFB and + buttons simultaneously for about 3 seconds, release them when you hear two "DU" tones and see red LED is on, now the headset restores to factory defaults, and the pairing information will be deleted.

Charge the headset to make it reset.

LED indicator

Charging

LED indicator Status of the headset
Red LED is on Charging
Red LED is off Finish charging

Pairing with the Bluetooth devices

LED Indicator Status of the headset
Red and blue LEDs blink alternately Pairing mode
Blue LED quickly blinks once every 2 seconds.	Not connected to a device
Blue LED quickly blinks twice every 4 seconds	Set up HFP or A2DP connection
Blue LED quickly blinks three times every 2 seconds	Set up HFP and A2DP connection
Blue LED gradually turns on and off Conversation mode
Red LED blinks twice every 20 seconds	Low power

Indication tone

Indication tone	Status of headset
Two tones every 3 seconds	Conversation mode and microphone mute
Three “DU” tones every 20 seconds Low power

FAQs

1. Why does red light blink twice every 20 seconds?

Battery is low, need to be recharged.

2. Why is not the red light bright when charging?

a) Please make sure the charging device connects with headset well.

b) You didn't use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red light will be bright.

3. How far is the effective range between the headset and mobile phone?

According to the Bluetooth standard: the max. controllable range of Class2 headset is 10 meters. It varies under different environment.

4. Why cannot my cell phone search and find the headset?

The mobile phone will not find the headset if headset and mobile phone are not under the pairing mode, Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected.

5. Why cannot hear the voice?

a) Make sure the headset has been switched on.
b) Make sure the volume is not too low or muted.
c) Make sure the headset connects with the mobile phone correctly.
d) Make sure the distance between the headset and the cell phone is in the normal working scope.

6. Why is the voice not clear in conversation?

a) Make sure the mobile phone is in the strong signal area.
b) Make sure the headset is in the function range of this product.

7. Why can't control the function of pause, play, last song and next song when playing music?

This function needs your Bluetooth device supports AVRCP (Audio/Video Remote Control profile).

Specifications

Bluetooth version	Bluetooth V2.1+EDR
Bluetooth profiles	Headset, Hands free, A2DP, AVRCP
Effective range	10 meters
Working time	Music: Up to 10 hours, Talk: Up to 11hours
Standby time	Up to 250 hours
Input	DC: 5V/180mA
Charging time	Approx. 2.5 hours
Dimensions	162×153.5×32 mm
Weight	Approx. 103 g

Notes:

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin, Germany