VEGA X LITE - Action Camera Niceboy - Free user manual and instructions

Product Type	Action Camera
Brand	Niceboy
Model	VEGA X LITE
Dimensions (WxHxD)	58 x 41 x 29 mm
Weight (including battery)	47 g
Battery Type	Li-Ion, interchangeable, 750 mAh
Battery Life	Up to 60 minutes (display and Wi-Fi off, ~22°C)
Charging	Micro USB, 5V min. 1A, faster when powered off
Video Resolution	Full HD 1920x1080i 30fps, HD 1280x720p 30fps
Video Format	AVI, H.264
Photo Resolution	Up to 16 MP
Photo Format	JPG
Lens Angle	120°
Display	LCD 2"
Waterproof (with case)	Up to 30 meters
Connectivity	Wi-Fi (2.4 GHz), Micro USB
Microphone	Built-in
Memory Card Support	micro SD UHS-I U1 (class 10), up to 32 GB, FAT32 format
Key Features	Wi-Fi control via GoPlus CAM app, motion detection, loop recording, WDR, car mode, screen flip, date stamp
Package Contents	Camera, waterproof case, handlebar mount, tripod mount, adhesive mount, safety straps, battery, USB cable, manual
Safety Notes	Camera is not waterproof without case; ensure case gaskets are clean and closed properly; charge under supervision
Maintenance	Format memory card regularly in PC to avoid errors; clean case with fresh water after saltwater use; let dry naturally
Spare Parts / Repairability	Interchangeable battery; use only original waterproof case for watertightness

Frequently Asked Questions - VEGA X LITE Niceboy

How do I set the language on the camera?

Turn on the camera by pressing and holding the power button (6). Press button (6) three times to enter the settings menu. Use the browsing button (4) to navigate to the 'Language' option, press OK (1). Then use button (4) to select your language and confirm with OK.

What type of memory card should I use?

Use a micro SD card of up to 32 GB, type UHS-I U1 (class 10), formatted in FAT32. Format the card in a PC before first use and regular formatting is recommended to avoid video errors.

How do I charge the camera?

Connect a USB cable to the micro USB port (9) on the left side. Use a 5V adapter with at least 1A current. You can also charge via PC or power bank. For faster charging, turn the camera off. The red charging diode turns off when fully charged.

How do I turn on Wi-Fi and connect to the app?

Press the Wi-Fi button (3) on the right side of the camera to turn on Wi-Fi. In your phone's Wi-Fi settings, connect to the network named 'Niceboy' with password '12345678'. Then launch the GoPlus CAM app. Ensure mobile data is off and all app permissions are enabled.

Is the camera waterproof without the case?

No, the camera is not waterproof without its case. Use only the original waterproof case, which is watertight up to 30 meters. Always ensure the rear door is closed correctly and the gaskets are clean before submerging.

How do I switch between video, photo, and playback modes?

With the camera on, briefly press the power button (6) on the front to cycle through modes: Video, Photo, Playback, and Settings. In each mode, use the OK button (1) to start recording or capture, and the browsing buttons to navigate.

Can I use the camera as a webcam?

Yes, when connected to a PC via USB, you can select 'PC camera' mode. The camera will be recognized as a webcam by compatible software.

How do I reset the camera to factory settings?

Go to Settings mode, navigate to 'Factory settings' using the browsing button, and confirm with OK. This will reset all settings to default.

What is the maximum video length per file?

You can set video loop times in the settings (e.g., 1 min, 3 min, 5 min). The camera will record in segments of that length. If loop is off, recording continues until the card is full or you stop.

How do I clean the waterproof case after use in salt water?

Rinse the case with fresh water after saltwater use. Do not use cloths or external heat sources like fans or microwaves. Let the case dry naturally to avoid damage.

USER MANUAL VEGA X LITE Niceboy

Pure diagram of a rectangular device with labeled ports and internal components, no text or symbols present.

1. Shutter release/OK button – press to record or take a photo. Use while in the menu to select a chosen folder/item.
2. Wi-Fi diode - displays when the camera's Wi-Fi is powered on.
3. Browsing button/Wi-Fi - use to move up while in the menu. Press to power on/off Wi-Fi.

4. Browsing button - use to move down while in the menu.

5. Speaker - emits various audio signals.

6. Power button/Mode switch - press and hold to power on/off the camera. Once the camera is on, press to switch modes between recording video, capturing photos, viewing previously captured videos/photos and entering the camera's settings menu.
7. Camera lens
8. Microphone - records sounds within the vicinity of the camera.
9. Micro USB – designated for charging and connecting to a PC.
10. Micro SD slot - designated for inserting a memory card.
11. Charging diode – the diode will shine red once connected to a charger. The diode will stop shining once the battery is fully charged.
12. Operational diode - the diode will shine blue when the camera is turned on, the diode will flash when a video is being recorded.
13. Camera display

SETTING THE CAMERA'S LANGUAGE MENU

Power on the camera by pressing and holding the power button (6). Then press button (6) 3x to enter the camera's setting menu. Press the browsing button (4) to switch to the "Language" option and confirm by pressing the OK button (1). Use the browsing button (4) to switch to the desired language for the camera menu and confirm your choice by pressing the OK button (1).

MICRO SD CARD

Select a brand name micro SD card with a capacity of 32GB, type UHS-I U1 (class 10). The memory card must be formatted in a PC to the FAT32 file system before its first use.

Only use programs designated for formatting SD cards. Insert the memory card into slot (10) with the PINs facing the camera lens (front part of the camera). Insert the memory card into the camera until it clicks. Eject the memory card by pressing it until it clicks out of the slot.

Notice: regularly format your memory card in a PC in order to avoid errors with recorded videos. The manufacturer of the SD card you selected may supply you with more information about using or formatting your memory card.

BATTERY/CHARGING

To insert or remove the battery, open the cover on the underside of the camera. Connect a USB cable to the USB port (9) located on the left side of the camera for charging the camera. Connect the other end of the cable to a charging adapter, ex. a mobile phone charging adapter (5V voltage and electrical current minimum of 1A). The camera may also be charged by connecting the USB cable to the camera and then to a PC or powerbank.

Notice: fully charge the battery before the camera's first use. Don't expose the battery to large temperature differences. Supervise the camera while the battery is charging. The time it takes to charge the battery depends on the electrical current type of your charging adapter. The camera charges faster when powered off.

POWER THE CAMERA ON/OFF

Power on/off the camera by pressing and holding the power button (6), located on the front side of the camera.

SWITCHING BETWEEN CAMERA MODES

Switch between the camera's individual modes by pressing button (6), located on the front of the camera, near the power button. The camera comes equipped with the following modes:

1. Video mode

Start and stop filming by pressing the OK button (1), located on the top of the camera. While filming you can lock a video from being deleted. Press button (6) on the front of the camera to do so.

2. Photo mode

Take a photo by pressing the OK button (1), located on the top of the camera.

3. Video playback and photo browsing mode

You can browse through your captured videos and photos with the button on the right side of the camera. Press the OK button (1) on the top of the camera to play back a video, and press the same button to pause the video. You can adjust the volume of a video being played with the help of the button on the right side of the camera.

4. Settings mode

Move through the settings mode with the help of the button on the right side of the camera and confirm your choice by pressing the OK button on the top of the camera. Settings mode consists of the following items:

Video resolution: definition settings for video recording.

Exposure: compensation exposure settings. The higher the positive value, the lighter the video and the lower the negative value, the darker the video.

Movement detection: when turn on this function will power on the camera in the event something moves in front of the camera.

Video loops: video cycle, or time segment, settings in which your videos will be recorded.

Timer: time interval settings for the camera's self-timer.

WDR: turns on/off the function to improve the dynamic scale when recording scenes high in contrast.

Microphone: powers on/off the camera's microphone.

Date and time: turns on/off the option to insert the date and time into captured photos.

Photo resolution: resolution settings for capturing photos.

Quality: quality settings for capturing photos.

Imaging mode: timer settings for capturing photos.

Sharpness: sharpness settings for capturing photos.

ISO: ISO value settings

White balance: white balance settings for various methods of lighting a scene.

Frequency: frequency settings (50Hz for Europe, 60Hz for USA)

OSD: powers on/off the function of displaying information on the camera screen.

Screen saver: sets the time at which the display will power off. The display can then be activated again by pressing any button on the camera.

Screen flip: powers on/off the function to flip an image 180°.

Automatic power off: settings for the camera's automatic power-off function when the camera is not in use.

Language: language settings for the in-camera menu.

Acoustic signals: powers on/off button sounds.

Date and time: date and time settings.

Car mode: powers on/off the camera's function in which it automatically begins filming after being plugged in to charge.

Wi-Fi name: settings for the camera's Wi-Fi name.

Wi-Fi password: settings for the camera's Wi-Fi password.

Delete: delete captured photos and videos.

Format: erases all data stored on the memory card.

Factory settings: reset the camera to its factory settings.

Version: information regarding the camera's firmware.

CONNECTING THE CAMERA TO YOUR TELEPHONE VIA WI-FI

Install the app GoPlus CAM (free) to your phone (located in the Appstore for iOS and on Google Play for Android). Do not open the app after it has downloaded, instead follow these steps:

1. Turn on the camera's Wi-Fi by pressing button (3) on the right side of the camera.

2. Open the Wi-Fi settings on your mobile device and connect to the camera's network (name: Niceboy, password: 12345678).

3. Once your mobile device is connected to the camera's network, then launch the app from where you will be able to control the camera via your mobile device.

4. Press the Wi-Fi button (3) on the right side of the camera to turn of the Wi-Fi.

Notice: enable all app permissions in your phone settings, turn off your phone's "data connection", and leave Wi-Fi on before using the app. The app is compatible with mobile phones with iOS 9.0 and newer and mobile phones with Android 8.0 and newer.

CONNECTING THE CAMERA TO A PC

Connect the camera to a PC using the USB data cable plugged into the camera's USB port (9). You can then choose between the following modes:

1. Storage – files saved on your memory card inside the camera may be managed while connected to a PC (the camera acts as external storage connected to a PC).

2. PC camera: the camera may be used as a PC camera when used by programs that allow the connection of external cameras.

WATERTIGHTNESS

The camera is watertight only when paired with its watertight case, and may only be submerged in water under the following conditions:

The case is watertight to the depth of 30 meters. Before using the camera in its case, ensure that the case's rear door has been closed correctly with the help of the mechanism located on the upper side of the case. The small door and gaskets much be completely rid of any foreign materials such as dust, sand and the like. If the case has been used in salt water, wash the case off with fresh water. Do not use any textile materials or external heat sources to dry the camera (fans, microwave ovens, etc.), always let the case slowly dry out on its own.

Warning: the camera is not watertight without its case! Use only the original case to ensure the watertightness of the camera.

PACKAGE CONTENTS

Niceboy VEGA X LITE camera

Watertight case (may be connected to other accessories)

Handlebar attachment

Open camera mount

Tripod camera mount

Stick-on camera mount (ex. for helmets) + backup sticky band

Hitch meant for connection the case to other accessories

Safety straps

Battery

USB charging cable

Manual

SPECIFICATIONS

Lens: 120^

Video quality: Full HD (1920 x 1080i) 30fps, HD (1280×720p) 30fps

Video format: AVI, H.264

Max. photo definition: 16MPx

Photo format: JPG

Display: LCD 2"

Battery: 750 mAh, Li-Ion, interchangeable

Battery life: up to 60 minutes (powered off display and Wi-Fi, temperature around 22°C)

Watertightness: 30 metres when in its watertight case

Connectivity: Wi-Fi (2,4GHz), micro USB

Microphone: yes

Memory card: micro SD card, type USH-I U1 (class 10), max. 32GB, supported FAT32 format (memory card not included)

Camera dimensions: 58 x 41 x 29 mm

Weight including battery: 47 g

The manual may be installed in its electronic form at www.niceboy.eu under the support section. This product meets all basic EU regulation requirements placed upon it.

DE

Pure diagram of a rectangular device with internal components and labeled pins (no text or symbols beyond numbers)

Pure diagram of a rectangular device with labeled ports and internal components, no text or symbols present.

Simple line drawing of a device with two circular components and numbered labels (6 and 7), no text or symbols present.

Pure diagram of a rectangular device with internal components and labeled pins (no text or symbols beyond numbers)

1. Tipka Okidač / OK – koristi se za pokretanje snimanja ili fotografiranja. U izborniku potvrđuje odabranu stavku.
2. Dioda Wi-Fi – prikazuje uključen Wi-Fi na kameri.

3. Tipka za pomicanje/Wi-Fi – koristi se za kretanje u izborniku prema gore. Kratkim pritiskanjem uključujete/isključujete Wi-Fi.

4. Tipka za pomicanje - Koristi se za kretanje po izborniku prema dole.

5. Zvučnik - koristi se za zvučne signale, pokretanje i slično.
6. Tipka za uključivanje / Izmjena načina – dugim pritiskanjem uključuje/isključuje kameru. Kada je kamera uključena, kratkim pritiskanjem mijenjate način snimanja video, slikanja fotografija, reproduciranje snimljenih snimaka i ulazite u izbornik postavki kamere.
7. Objektiv kamere
8. Mikrofon - koristi se za snimanje zvukova oko kamere.
9. MicroUSB – koristi se za punjenje ili priključak za računalo.
10. MicroSD utor – koristi se za namještanje memorijske kartice.
11. Dioda punjenja – nakon priključenja na punjenje, LED svijetli crvenom bojom. Nakon punjenja dioda se gasi.
12. Dioda za rad - plava dioda označava da je kamera uključena, a dok treperi pokazuje da je snimanje videa u tijeku.
13. Zaslon kamere

IZBORNIK ZA POSTAVLJANJE JEZIKA KAMERE

Uključite kameru dugim pritiskanjem na tipku za uključivanje (6). Zatim kratko pritisnite tipku (6) tri puta kako biste ušli u izbornik postavki kamere. Tipkom za pomicanje (4) pređite na poziciju „Language“ i potvrdite je tipkom OK (1). Tipkom (4) pređite do željenog jezika izbornika kamere i potvrdite izbor tipkom OK (1).

KARTICA MICRO SD

Odaberite kvalitetnu microSD karticu veličine 32 GB, tipa UHS-I U1 (class 10). Prije uporabe u kameri, kartica mora biti formatirana u računalu i u datotečnom sustavu FAT32.

Za formatiranje koristite programe koji su za to namijenjeni. Umetnite SD karticu u utor /10) s PIN-ovima okrenutim prema objektivu kamere (prednja strana kamere). Memorijsku karticu umetnite u ili izvadite iz utora na kameri „škljocanjem“.

Upozorenje: memorijsku karticu redovito formatirajte u računalu kako biste spriječili poteškoće prilikom pohrane videa na karticu. Za više informacija o korištenju i formatiranju memorijske kartice obratite se proizvođaču vaše kartice.

BATERIJA/PUNJENJE

Kako biste mogli izvaditi bateriju, otvorite poklopac na donjoj strani kamere. Za punjenje kame-re koristite USB kabel za punjenje, priključen u USB priključak (9) na lijevoj strani i priključite ga na adapter za punjenje, npr. na mobilnom telefonu (napon 5V i najmanje 1A struje). Kameru možete, također, puniti i putem USB-a u računalu ili u banci za napajanje.

Upozorenje: prije prve uporabe napunite bateriju do kraja (punog kapaciteta). Ne izlažite bateriju variranju temperature. U toku punjenja držite bateriju pod nadzorom. Vrijeme punjenja ovisi o izlaznoj struji adaptera za punjenje. Za brže punjenje isključite kameru.

UKLJUČIVANJE/ISKLJUČIVANJE KAMERE

Kameru uključite/isključite dugim pritiskanjem tipke za uključivanje (6) na prednjoj strani kamere.

PREBACIVANJE NAČINA U KAMERI

Za prebacivanje između pojedinih načina rada kratko pritisnite prednju tipku (6) s uključenom kamerom. Kamera ima sljedeće načine:

1. Način snimanja

Pure diagram of a rectangular device with labeled ports and internal components, no text or symbols present.

VSEBINA PRODAJNEGA SETA

Kamera Niceboy VEGA X LITE

Pure diagram of a rectangular device with labeled ports and internal components, no text or symbols present.

Pure diagram of a rectangular device with labeled ports and internal components, no text or symbols present.

Importer to EU: RTB media s.r.o., Pretlucka 16, Prague 10, 100 00, Czech Republic, ID: 294 16 876 Made in China.

RoHS CE 📧 ✉️