CRIVIT Z31952A - Uncategorized

Z31952A - Uncategorized CRIVIT - Free user manual and instructions

Find the device manual for free Z31952A CRIVIT in PDF.

📄 46 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CRIVIT Z31952A - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Fitness Tracker / Activity Monitor
Brand Crivit
Model Z31952A
Dimensions (approx.) 4.5 x 2.0 x 1.2 cm
Weight (approx.) 25 g
Power Source CR2032 coin cell battery (replaceable)
Battery Life Approximately 12 months under normal use
Display LCD screen with time, steps, distance, calories
Key Functions Step counter, distance tracker, calorie counter, 12/24 hour clock
Memory Stores 7 days of data (daily totals)
Water Resistance IPX4 splash proof, not suitable for swimming
Attachment Clip-on or wristband (included)
Care Instructions Wipe clean with a damp cloth; do not use abrasive cleaners or immerse in water.
Safety Notes Keep away from extreme heat; remove battery if not used for extended periods; contains small parts, keep out of reach of children under 3.
Spare Parts / Repairability Battery (CR2032) available at most electronics stores; device not user-serviceable beyond battery replacement. Dispose of according to local regulations.
General Information Compliant with EU directives; CE marked. For personal fitness use only, not a medical device.
Manual Languages Available in multiple languages via manufacturer's website.

Frequently Asked Questions - Z31952A CRIVIT

How do I replace the battery in my Crivit Z31952A?
Open the battery compartment on the back using a coin or small screwdriver. Remove the old CR2032 battery and insert a new one with the positive side facing up. Close the compartment firmly.
Is the Crivit Z31952A waterproof?
The device has an IPX4 water resistance rating, meaning it can withstand splashes of water, but it is not waterproof. Do not submerge it in water or use it while swimming.
How do I set the time on the fitness tracker?
Press and hold the SET button for 3 seconds until the hour flashes. Use the MODE button to adjust, then press SET to confirm. Repeat for minutes. The clock supports 12/24h format.
Why is my step count not accurate?
Ensure the device is worn securely on your wrist or clipped firmly to your belt. The sensor is based on pendulum motion; erratic movements or loose attachment can cause inaccuracies.
How do I reset the daily data?
The device automatically resets at midnight. To manually clear data, press and hold the RESET button (if available) for 5 seconds, or refer to the manual for specific instructions.
What does the calorie counter estimate?
Calories are estimated based on your steps and an average basal metabolic rate. For more accuracy, you may need to input your weight and height if the device allows.
Can I wear the Crivit Z31952A while exercising?
Yes, it is designed for daily fitness activities like walking, running, and light workouts. However, avoid excessive moisture or impact sports as it may damage the device.
How to clean the fitness tracker?
Use a soft, damp cloth to wipe the device. Do not use alcohol, solvents, or abrasive cleaners. Ensure the device is dry before wearing.
Why does the display show 'Err'?
The 'Err' message typically indicates a battery low or sensor malfunction. Try replacing the battery first. If the error persists, contact Crivit support.
Is the Crivit Z31952A a medical device?
No, it is a consumer fitness tracker for recreational use. It is not certified for medical purposes and should not be used for health diagnostics.

User questions about Z31952A CRIVIT

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Z31952A - CRIVIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Z31952A by CRIVIT.

USER MANUAL Z31952A CRIVIT

Operation and Safety Notes

HU

FELFÚJHATÓMATRAC

GB Operation and Safety Notes Page 4

Description of parts....Page 5

Technical data....Page 5

Scope of delivery....Page 5

Safety advice Page 5

Pictograms Page 6

Operation

Letting in air Page 8

Letting air out....Page 8

Cleaning and care

Storage instruction....Page 9

Repairing the inflatable mattress....Page 9

Disposal Page 9

Introduction / Safety advice

Pool Lounger

- Introduction

CRIVIT Z31952A - - Introduction - 1

Before using the product for the first time, take time to familiarise yourself with the product first. Read the following operation instructions and safety instructions carefully. Only use the product as described and for the designated areas of application. Please keep these instructions in a safe place. If you hand this product on to a third party, you must also pass on all documents relating to the product.

DEFIANCE AND VIOLATION OF THIS MANUAL CAN RESULT IN HAZARDS, SUCH AS PERSONAL INJURY AND DEATH, E.G. FROM DROWNING!

- Intended Use

This product is intended for use as a mattress. This product is not suitable for children under 13 years of age. Any use other than previously mentioned or any product modification is prohibited and can lead to injuries and / or product damage. The manufacturer is not liable for any damages caused by any use other than for the intended purpose. The product is not intended for commercial use.

● Description of parts

1 Pool Lounger
2 Air pressure indicator
3 Measuring strip
4 Air valve
5 Straw
6 Repair patch

- Technical data

Dimensions (inflated): Approx. 178 x 65 x 19 cm (L x W x H)

Dimensions (deflated): Approx. 191 x 71 cm (L x W)

Dimensions

(packed away): Approx. 28 x 20 x 5.5 cm (L x W x H)

Weight: Approx. 1.02kg

Max. No. of persons: 1 adult

Max. load: 100 kg

Rated pressure: Body: 0.45 psi (0.031 bar)

Pillow: 0.30 psi (0.021 bar)

Material: Plastic with Hexamoll®

DINCH

- Scope of delivery

1 pool Lounger
1 measuring strip
1 straw
2 repair patches
1 instruction manual

CRIVIT Z31952A - - Scope of delivery - 1

Safety advice

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

WARNING! RISK OF FATAL INJURY AND RISK OF ACCIDENTS FOR INFANTS AND

CHILDREN! Never leave children unattended with the packaging material or the product. There is a risk of suffocation from the packaging materials and a risk of fatal injury by strangulation. Children often underestimate dangers. Always keep children away from the product. The product is not a toy.

WARNING! DANGER TO LIFE! Never let children unsupervised with the product. The product may not be used by children under the age of 13.

WARNING! DANGER TO LIFE THROUGH DROWNING! Never leave children and mattress alone and unsupervised in the water. There is a danger of drowning. Use swimming aids if necessary. Never stay in the water

GB 5

Safety advice

alone. Make sure that at least one competent person is present.

WARNING! DANGER TO LIFE! Never use the product in open water. Danger of being carried away from the bank or shore. Always use the product in enclosed areas of water that are small enough to be monitored or supervised, such as swimming pools (see warnings on the air mattress 1).

WARNING! DANGER TO LIFE! The air mattress 1 is not suitable for use as a floatation aid! A child who slips off the product could drown in a very short time, even though the water may be shallow enough to stand up in. Children who cannot yet swim must therefore never be left to play unsupervised in water.

WARNING! DANGER TO LIFE! Never use this air mattress 1 in deep areas of water. Use it exclusively in shallow areas of water. An area of water can be considered as shallow if the user of the air mattress 1 is able to sit on the bottom of the area of water and hold his or her head clearly above the water's surface (see warnings on the air mattress 1).

CAUTION! RISK OF INJURY! Make sure that all parts are undamaged. Damaged parts could adversely affect safety and function.

CAUTION! RISK OF INJURY! Make sure that you do not pump too much air into the product. Otherwise the product may burst.

CAUTION! RISK OF POISONING AND RISK OF DAMAGE TO PROPERTY! Do not light any fires near the product and keep it away from sources of heat.

- Do not use the product on hard or stony ground. Otherwise this may result in damage to the product.

- Keep the product away from pointed objects. Otherwise damage to the product may result.

CAUTION! The air chambers may be pressed under the water surface when getting onto it. This - as well as uneven loading of the product - could cause it to tip over.

- Keep the repair patches out of the reach of children.

- Pictograms

WARNING! Take note of the information contained in the pictograms applied to the product before you use it. Failure to observe this advice could result in injury and / or damage.

CRIVIT Z31952A - - Pictograms - 1Mandatory action sign
CRIVIT Z31952A - - Pictograms - 2Swimmers only!
CRIVIT Z31952A - - Pictograms - 3Fully inflate all air chambers as indicated order of inflation.
CRIVIT Z31952A - - Pictograms - 4Read instructions first.

Safety advice

CRIVIT Z31952A - Safety advice - 1Always supervise children in water.
CRIVIT Z31952A - Safety advice - 2Max. load capacity
CRIVIT Z31952A - Safety advice - 3Pool use only.
CRIVIT Z31952A - Safety advice - 4Device provides floating stability.
CRIVIT Z31952A - Safety advice - 5Device requires balancing.
CRIVIT Z31952A - Safety advice - 6Numbers of users, adults / children
CRIVIT Z31952A - Safety advice - 7Prohibition sign
CRIVIT Z31952A - Safety advice - 8Apply only to children above 13 years of age.
CRIVIT Z31952A - Safety advice - 9Do not use in offshore wind.
CRIVIT Z31952A - Safety advice - 10Do not use in offshore current.

Safety advice / Operation

CRIVIT Z31952A - Safety advice / Operation - 1Warningaction sign
CRIVIT Z31952A - Safety advice / Operation - 2No protectionagainst drowning.

Operation

Note: Before using the product for the first time, check it carefully for holes, porous places and or seams that are not airtight.

Recommendation: Blow up the product and leave it alone for one day. Air new products in the open air for a few days.

- Letting in air

CAUTION! Inflatable plastic products are sensitive to the cold. That is why you should never use the product when the ambient temperature falls below 15 °C and rises above 45 °C. Otherwise damage to the product may result.

Note: Inflating the mattress 1 should be done by adults only. We do, however, recommend the use of a mechanical pump. Make sure that you do not blow / pump too much air into the product. Stop the process when resistance increases during pumping and the seams start to stretch. Otherwise the material may tear. Only use manual pumps and / or pumps specifically designed for use with inflatable plastic products.

Note: The product has an air pressure 2 indicator on its outside edge. The indicator is marked with the maximum allowable air pressure. Pump air into the product until the maximum marking is reached. Do not over-inflate.

☐ Roll the product out first and then check for holes, tears and other damage (see Fig. A).
□ Open the air valve 4 (see Fig. B I).
☐ Press the air valve 4 together and blow or pump the product up until it is tautly stretched. Note: Blow or pump the pillow chamber first, then the body chamber.
☐ Place the measuring strip 3 on the air pressure indicator 2. If both have exactly the same length the rated pressure is reached (see Fig. D). Stop pumping then.

CAUTION! On no account should you use compressed air. Otherwise the product could burst or the seams could tear.

IMPORTANT! Keep in mind that air temperature and weather conditions can affect the air pressure inside inflatable products. In cold weather the product behaves as if it has less air pressure in it because the air inside contracts. Under these conditions you may have to add air. In hot weather the air inside expands. Under these conditions you may have to remove air in order to avoid overfilling.

☐ Close the air valve 4 (see Fig. B II).
☐ Push the air valve 4 in (see Fig. B III).

- Letting air out

☐ Pull the air valve 4 out and open it (see Fig. B II + I).
☐ Press the sides of the air valve 4 together using your thumb and index finger, then put the straw 5 in for deflation and remove your hand (see Fig. A).
☐ Remove the straw 5 when all the air has escaped.

Note: Do not insert the straw too far into the valve 4. Otherwise the straw 5 could drop into the inflation chamber.

☐ Slowly roll the product up (see Fig. A).

Operation/Cleaning and care/Disposal

Note: Make sure that the product is completely dry before you roll it up.

☐ Press the sides of the air valve 4 again in order to let any remaining air escape.

- Cleaning and care

□ Use a slightly damp, lint-free cloth to clean the product.
☐ On no account should you use corrosive or scouring detergents.
☐ Have a specialist shop carry out any small repairs to the product. A special repair kit is required.

Place the patch 6 on the hole and press it down firmly. If necessary, stand a heavy object on the patch 6.
☐ Wait for 24 hours before you pump up the product again.

- Disposal

CRIVIT Z31952A - - Disposal - 1

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

- Storage instruction

☐ Make sure that the product is completely dry both inside and out when wishing to store it for any length of time. Otherwise mildew and mould may form.
□ Store the product in dark, dry place – out of reach of children.
☐ The ideal storage temperature is 10 - 20 °C.
☐ Ensure that the product does not come into contact with sharp objects during storage.

● Repairing the inflatable mattress

Note: Minor damage can be repaired by the owner using the supplied repair kit. Have any major damage carried out at a specialist repair shop.

☐ First let all the air escape from of the product (see "Letting air out").
☐ Cut the patch 6 to suit the size of the hole. Note: Ensure that the patch 6 is larger than the hole and overlaps the edges of the hole.
☐ Round off the sides of the patch 6 and pull off the protective foil (see Fig. E).

Spis zawartości

Wstep

natural_image Abstract black-and-white icon depicting a human figure with motion arrows and wave patterns (no text or symbols)

Znak zakazu

0-13

natural_image Symbolic illustration of a person rowing a boat with a cross symbol, no text or numbers present
natural_image Symbolic illustration of a cross over a landscape with trees and waves (no text or symbols)

Znak ostrzeżenia

CRIVIT Z31952A - Wstep - 2

natural_image Simple black stick figure bending over water, no text or symbols present

Tiltó jelzés

0-13

natural_image Symbolic illustration of a person rowing a boat with a cross symbol, no text or numbers present
natural_image Symbolic illustration of a cross over a landscape with trees and waves (no text or symbols)
natural_image Simple black icon of a person bending over water, no text or symbols present
natural_image Gray circular warning symbol with an exclamation mark in the center (no text or symbols)

Obvezujoče navodilo

CRIVIT Z31952A - Wstep - 4

natural_image Symbolic icon of a diver swimming with waves, enclosed in a rounded square frame (no text or symbols)

Samo za plavalce!

100% + 1

Znak za prepoved

0-13

natural_image Symbolic illustration of a person rowing a boat with a cross symbol, no text or numbers present
natural_image Symbolic illustration of a cross over a landscape with trees and water (no text or symbols)
natural_image Gray circular warning symbol with an exclamation mark in the center (no text or symbols)

Závazná instrukce

CRIVIT Z31952A - Wstep - 7

natural_image Silhouette of a person swimming with waves, no text or symbols present
natural_image Symbolic illustration of a person swimming with an arrow pointing to water, no text or symbols present
natural_image Simple black stick figure bending over water, no text or symbols present

Značka zákazu

0-13

natural_image Symbolic illustration of a person rowing a boat with a cross symbol, no text or numbers present

Nepoužívajte vtedy, ak fúka vietor smerom od brehu.

CRIVIT Z31952A - Wstep - 9

natural_image Symbolic illustration of a cross over a landscape with trees and water (no text or symbols)
natural_image Abstract black-and-white icon depicting a human figure with motion arrows and wave patterns (no text or symbols)

Prohibition sign with a diagonal line crossed out in the circle, indicating no prohibition or exclusion.

Verbotszeichen

0-13

natural_image Symbolic illustration of a person rowing a boat with a cross symbol, no text or numbers present
natural_image Symbolic illustration of a cross over a landscape with trees and waves (no text or symbols)

Warnzeichen

CRIVIT Z31952A - Wstep - 12

natural_image Simple black stick figure bending over water, no text or symbols present
natural_image Vertical grayscale image with a crosshair overlay, no visible text or symbols

OWIM GmbH & Co. KG

Stiftsbergstraße 1

D-74167 Neckarsulm

Model-No.: Z31952A

Version: 01/2014

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CRIVIT

Model : Z31952A

Category : Uncategorized