IAN 277760 - Uncategorized ULTIMATE SPEED - Free user manual and instructions

Product Type	Universal Car Seat Cover
Model	IAN 277760
Brand	Ultimate Speed by Walser Group
Intended Use	Front driver or passenger seat
Compatibility	Universal fit, side airbag compatible (tested on various models)
Airbag Suitability	Tested and approved for side airbags (TUV report B3SG0170)
Material	Textile fabric (not specified)
Care Instructions	Hand wash only
Bleaching	Do not bleach
Drying	Do not tumble dry
Ironing	Do not iron
Dry Cleaning	Do not dry clean
Safety Certification	TUV Rhineland approved (no. 835G0170)
Guarantee	3 years from date of purchase
Country of Origin	Germany (service address)
Service Hotline	00800 00300030 (toll-free)
Disposal	With residual waste

Frequently Asked Questions - IAN 277760 ULTIMATE SPEED

Is this seat cover compatible with side airbags?

Yes, it has been tested and approved for side airbag deployment. TUV report B3SG0170 confirms compatibility with various vehicle models.

Can I use this seat cover on both driver and passenger seats?

Yes, it is designed for both front seats. Ensure correct installation to avoid interfering with airbag function.

How do I clean the seat cover?

Hand wash only, do not bleach, do not tumble dry, do not iron, and do not dry clean.

What is the warranty period?

The product comes with a 3-year guarantee from the date of purchase, covering material and manufacturing defects.

Does the cover require professional installation?

No, it can be fitted by the user. Ensure it is securely fixed and does not slip. If worn out, replace immediately.

What should I do if the cover slips out of position?

Refit the cover properly. If it cannot be secured due to wear, remove and replace it to maintain safety.

Is this cover suitable for all car models?

It is a universal fit, but side airbag compatibility has been tested on specific models. Check the list at www.walsergroup.com/clx.

How do I contact customer service?

Call the toll-free service hotline [phone] or return to Walser Customer Service Germany.

Can I dispose of the cover with regular waste?

Yes, the product can be disposed of with residual waste. Recycle packaging according to local regulations.

Does this cover affect seat heating?

The manual does not specify seat heating compatibility. If your seat has heating, test carefully and ensure no obstruction.

USER MANUAL IAN 277760 ULTIMATE SPEED

Person adjusting a black hooded seat, with an inset showing the same leg detail (no text or symbols visible)

Close-up of hands installing or adjusting a dark mechanical component on a car (no visible text or symbols)

3

Close-up of a car seatbelt with a hand holding a plastic bag (no visible text or symbols)

1. 

Close-up of a hand holding a black fabric with attached wires and arrows, no visible text or symbols

5

Close-up of a person's seatbelt with visible pocket and zipper (no text or symbols)

GB

- Introduction

Congratulations on your purchase. You have chosen a high quality product. The instructions for use are part of this product. Please familiarise yourself with all instructions for use and safety instructions before using the device. Only use the product as described and for the stated areas of use. Hand over all documents when passing on the product to a third party.

• Safety information

Please ensure the seat cover is set up and fixed in place on the respective driving seat correctly when you first fit it. This cover can be used for both the driver's seat as well as the passenger seat. Incorrect fitting can prevent the seat airbag from inflating correctly in the event of a collision. Seat covers which have slipped out of position must be refitted. If this is not possible due to an advanced state of wear and tear, the seat cover must be removed and replaced. This seat cover has been inspected by the official TUV Rhineland inspection body and has been approved with the number 835G0170.

Side airbag suitability tested in different vehicle models. See area of application (list of vehicle models) and technical report no. B3SG0170. Can be found at: www.walsergroup.com/clx

• Manufacturer and Testing

Information

• Care and disposal instructions

Handwash

□

dellor bleuch

not fumble dry

Zhe hot iron

not druclean

This product can be disposed of with the residual waste. Dispose of the packaging according to the local regulations.

• Service

This product has been produced with great care and under continuous quality control. The product comes with a three year guarantee from date of purchase. Please keep your receipt safe. The guarantee applies only to material and manufacturing defects and does not apply to misuse or improper treatment. Your statutory rights, especially the rights of warranty, are not restricted by this guarantee. Extent of validity. Please use the service hotline which has been provided for you or contact the service centre in the European Economic Area. Costs: Repair or replacement free of charge or a refund of the purchase cost. Shipping costs will not be charged.

Advisory notice: Before returning your product, contact our hotline by telephone, so that we can help you with any operating errors.

IAN 277760

Service address:

Walser Customer Service Germany

D-88131 Lindau, Germany

Telephone number of Service-Hotline:

00800 00300030

www.warsergroup.com

HUOZ

- Bevezetés

Walser Customer Service Germany

Langerweg 34 DF80121 Inday, Germany

DE-88131 Unidad, Germany

Spätná adresa:

Walser Customer Service Germany

Walser GmbH

D-BB131 Lindau, Germany

Servisné tel. číslo: 00800 00300030 www.walsergroup.com

O

• Úvod

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

Walser Customer Service Germany

DE-88131 Lindau, Germany

Retourenadresse:

Walser Customer Service Germany

D88131 Lindau, Germany