SCA MH01 - Uncategorized SENCOR - Free user manual and instructions

Product Type	Handheld Vacuum Cleaner
Brand	Sencor
Model	SCA MH01
Dimensions (L x W x H)	25 x 15 x 10 cm
Net Weight	1.2 kg
Power Supply	Rechargeable Li-ion battery, 7.4 V, 2000 mAh
Charging Time	Approx. 4-5 hours
Runtime	Up to 20 minutes
Suction Power	5000 Pa (estimated)
Dust Cup Capacity	0.5 L
Filtration System	Washable HEPA filter
Included Accessories	Crevice tool, brush nozzle, wall mount, charging cable
Main Functions	Dry vacuuming of hard floors, carpets, upholstery, and crevices
Maintenance	Empty dust cup after each use; wash filter monthly; clean nozzle as needed
Safety Features	Overcharge protection, thermal cut-off, automatic shut-off when battery low
Spare Parts Available	Replacement filter, battery pack, charger
Repairability	Modular design allows easy replacement of battery and filter
General Information	LED battery indicator; lightweight for portable use; wall-mountable for storage

Frequently Asked Questions - SCA MH01 SENCOR

How do I charge the Sencor SCA MH01 vacuum?

Connect the included charging cable to the vacuum and a USB power source (e.g., adapter or computer). The LED indicator will show red during charging and turn blue when fully charged. Charging time is approximately 4-5 hours.

How do I empty the dust cup?

Press the release button on the dust cup and pull it away from the vacuum. Empty the contents into a trash bin. For thorough cleaning, you can wash the cup with water and let it dry completely before reattaching.

How often should I clean the filter?

Clean the filter at least once a month or when you notice reduced suction. Tap off loose dust or rinse with water. Allow the filter to dry completely for 24 hours before reinstalling. Never operate the vacuum without the filter.

What is the battery runtime?

The runtime is up to 20 minutes on a full charge. Actual runtime may vary depending on the suction setting and surface type.

Can I use the vacuum on wet surfaces?

No, this vacuum is designed for dry use only. Do not vacuum liquids, as this may damage the motor and void the warranty.

How do I attach the crevice tool or brush?

Push the desired accessory directly onto the suction opening until it clicks into place. To remove, press the release button (if present) or pull firmly.

What does the LED indicator mean?

A solid blue light indicates the battery is fully charged or the vacuum is running normally. A red light means the battery is low or the vacuum is charging. Flashing red may indicate an error.

Why is the suction weak?

Weak suction is often caused by a full dust cup or a clogged filter. Empty the cup and clean the filter. Also check the nozzle and brush for blockages.

Can I replace the battery myself?

Yes, the battery is removable and replaceable. Purchase a compatible replacement battery and follow the instructions in the manual to install it safely.

How should I clean the vacuum body?

Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the vacuum in water. Ensure the charging port remains dry.

USER MANUAL SCA MH01 SENCOR

Top-down view of a T8-Clayset smartphone with attached-mounted sensors (no visible text or symbols on the device body)

Illustration of a smartphone with battery and sensor device, showing front and side views (no text or symbols)