X-P B3 MX - Uncategorized HILTI - Free user manual and instructions

Product Type	Cordless Impact Driver
Brand	Hilti
Model	X-P B3 MX
Voltage	18 V
Battery Type	Lithium-Ion (Li-Ion)
Max Torque	180 Nm
Speed (No Load)	0 - 2800 RPM
Impact Rate	0 - 3200 BPM
Chuck Type	1/4" Hex
Weight (incl. battery)	1.5 kg
Dimensions (L x W x H)	200 x 70 x 200 mm
Variable Speed Trigger	Yes
Forward/Reverse Switch	Yes
LED Light	Built-in LED for illumination
Belt Hook	Integrated
Charging Time	Approx. 45 minutes (with B3 charger)
Operating Temperature Range	-10°C to 50°C
Maintenance	Clean with dry cloth; store in dry, dust-free area
Safety Features	Safety lock-off trigger, over-discharge protection
Spare Parts Availability	Batteries, chargers, and brush sets available from Hilti
Warranty	2 years (subject to Hilti terms)

Frequently Asked Questions - X-P B3 MX HILTI

How long does the battery last on a full charge?

Battery life depends on usage, but typically a 2.0 Ah battery provides about 50-60 minutes of continuous driving at medium torque. For longer runtime, use a higher capacity battery like Hilti B 22/5.2.

What charger is compatible with the X-P B3 MX?

The X-P B3 MX uses Hilti B3 series chargers (e.g., B3-18). Always use a genuine Hilti charger for optimal performance and safety.

Can I use other brands' batteries with this tool?

No, only Hilti B3 series Li-Ion batteries are compatible. Using non-Hilti batteries may damage the tool and void warranty.

What is the maximum torque setting?

The X-P B3 MX delivers up to 180 Nm of torque, suitable for heavy-duty fastening applications like screwing into wood or metal.

Does the tool have a variable speed trigger?

Yes, the variable speed trigger allows precise control of the driving speed from 0 to 2800 RPM. The harder you press, the faster it runs.

How do I change the direction of rotation?

Use the forward/reverse switch located above the trigger. Slide it to the left for forward (screwing in) and right for reverse (screwing out). Ensure the tool is at a complete stop before switching.

Is the X-P B3 MX suitable for driving screws into concrete?

This impact driver is designed for wood and metal screws. For concrete, use a rotary hammer or an SDS drill. The impact mechanism may not be effective on masonry.

How do I clean and maintain the tool?

After use, wipe the exterior with a dry cloth. Keep air vents free of dust. Do not use water or solvents. Store in a dry, indoor location.

What safety equipment should I use?

Always wear safety glasses to protect against flying debris. Use hearing protection in noisy environments. Keep hands away from rotating chuck.

The tool stops suddenly during use – what could be wrong?

This could be due to battery over-discharge protection or overheat. Remove the battery, let the tool cool for 15 minutes, and recharge the battery. If persists, contact Hilti service.

USER MANUAL X-P B3 MX HILTI

2345932-09.2021