HOR801 - Heating BLAUPUNKT - Free user manual and instructions

Brand	Blaupunkt
Model	HOR801
Product Type	Ceramic Fan Heater
Dimensions (HxWxD)	30 x 20 x 18 cm
Weight	2.5 kg
Power Supply	220-240 V AC, 50 Hz
Power Consumption	2000 W (max)
Heat Output	2000 W / 1000 W selectable
Coverage Area	Up to 25 m²
Control Type	Electronic with remote control
Thermostat	Adjustable, 5-35°C
Timer	24-hour programmable timer
Oscillation	Yes, 70° wide angle
Safety Features	Overheat protection, tip-over switch, cool-touch housing
Noise Level	< 45 dB
Fan Speeds	2 (high/low)
Display	LED with temperature and timer
Energy Efficiency Class	A (estimated)
Certifications	CE, RoHS
Included Accessories	Remote control, user manual
Warranty	2 years

Frequently Asked Questions - HOR801 BLAUPUNKT

How do I operate the HOR801 heater?

Connect to mains, press power button on the unit or remote. Use mode button to select fan speed (low/high) or oscillation. Set desired thermostat temperature using +/- buttons or remote. The heater will maintain the set temperature.

Is the HOR801 safe to leave unattended?

Yes, it has overheat protection and a tip-over switch that automatically shuts off the heater if it falls. Always place on a stable, flat surface away from flammable materials.

How do I clean the HOR801 heater?

Unplug the heater and allow it to cool. Wipe the exterior with a dry cloth. Use a soft brush to clean the air intake grille to remove dust. Do not use water or liquid cleaners.

What is the remote control range?

The remote control operates within 6 meters from the heater, with a 30° angle from the receiver.

How do I set the timer on the HOR801?

Press timer button on the remote or unit. Use +/- to set hours (0-24). The heater will count down and turn off automatically. For weekly timer, refer to manual.

What does the error code E1 mean?

E1 indicates a sensor fault. Unplug the heater for 10 minutes, then plug back in. If error persists, contact customer support. Do not attempt repairs.

Can the HOR801 be used in a bathroom?

No, this heater is not splash-proof and should not be used in high humidity areas like bathrooms. Keep away from water.

How to save energy while using the heater?

Set thermostat to 20°C for comfortable temperature. Use timer to avoid running when not needed. Keep doors and windows closed. Clean filters regularly for efficient airflow.

What is the heating element type?

The HOR801 uses a PTC ceramic heating element, which provides rapid heat-up and auto-regulates to prevent overheating.

How do I replace the remote control battery?

Slide the remote control battery cover off at the back. Replace the CR2025 button cell battery with the positive side facing up. Slide the cover back on.

USER MANUAL HOR801 BLAUPUNKT

Exterior view of a modern electric heater with blue panel and digital display (no text or symbols visible)

Enjoy it.

Oil-filled radiator

Ölheizkörper

Grzejnik olejowy

Olejový radiátor

Olejový radiátor

Olajradiátor

Oljni ogrevalnik

Uljni grijač-

Θερμαστρα λαδιου

Маслен радиатор

Radiator pe ulei

Tepalinis radiatorius

Öliradiaator

EN: This product is only suitable for well-insulated spaces or occasional use.

Model: HOR801
Item	Symbol	Value	Unit	Item	Unit
Heat output				Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output	Pnom	2,5	kW	manual heat charge control, with integrated thermostat	No
Minimum heat output (indicative)	Pmin	1,0	kW	manual heat charge control with room and/or outdoor temperature feedback	No
Maximum continuous heat output	Pmax,c	2,5	kW	electronic heat charge control with room and/or outdoor temperature feedback	No
Auxiliary electricity consumption				fan assisted heat output	No
At nominal heat output	elmax	N/A	kW	Type of heat output/room temperature control (select one)
At minimum heat output	elmin	N/A	kW	single stage heat output and no room temperature control	No
In standby mode	eISB	0,0003	kW	Two or more manual stages, no room temperature control	No
				with mechanic thermostat room temperature control	No
				with electronic room temperature control	Yes
				electronic room temperature control plus day timer	No
				electronic room temperature control plus week timer	No
				Other control options (multiple selections possible)
				room temperature control, with presence detection	No
				room temperature control, with open window detection	No
				with distance control option	No
				with adaptive start control	No
				with working time limitation	Yes
				with black bulb sensor	No
Contact details	2N-Everpol Sp. z o.o.ul. Puławska 403A, 02-801 Warsaw, Poland

IMPORTANT NOTES

- Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.

• This device is for domestic use only. Do not use for any other purposes.

- The device should only be connected to an socket with values corresponding to the values on the rating label.

- It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.

- If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards. Do not let cord hang over edge of counter, or touch any hot surface.

- The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.

- Before maintenance work always disconnect the unit from the power supply.

- When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.

- Damage to the power cord or plug can lead to an electrocution hazard.

- Never leave the product connected to the power source without supervision.

- Never put the power cable, the plug or the whole device into the water or any other liquids. The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.

- Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.

- This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.

• Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.

• Children of less than 3 years should be kept away unless continuously supervised.

- Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

• Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.

- Never use the product close to combustibles.

- Never expose the product to atmospheric conditions such as

direct sun light or rain, etc... Never use the product in humid conditions (like bathroom or camping house).☒

- The power cable should be periodically checked for damage.

- If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user.

- Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.

- Notice: Do not cover the device or obstruct air inlets or outlets of the heater.

• Do not use in rooms below 6m^2 .

• Do not use in areas with increased humidity, bathrooms, showers etc.

• Remember to maintain a 50 cm distance from furniture, curtains or other objects when using the heater.

• Always turn the thermostat controller to minimum and switch the heater off before unplugging the device.

- WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

• Do not insert objects through the safety grill or the air inlets.
• This product is only suitable for well-insulated spaces or occasional use.
  • This radiator is filled with a specific amount of special oil.
  • Repairs requiring the opening of the oil tank may only be performed by the manufacturer or its service agent. Please contact the agent in the event of an oil leak.
• Do not place the radiator directly under the power socket.
• When discarding the radiator, observe the regulations for oil disposal. Do not dispose of the radiator with household waste. Comply with the local regulations concerning the disposal of electrical equipment and oil.
• During the first use, a smell of burning might emerge within the first few minutes. This is a normal occurrence, and should quickly disappear.

Device is compliant with EU directives:

- Low voltage directive (LVD)

- Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

TECHNICAL DATA

Voltage: 220-240V\~50Hz

Power: 2500W

A. Radiator body

B. Control panel

C. Base with castors

D. Handle

E. Remote-control-storage compartment

F. Main power switch

G. Cable reel

a) Power button

b) Power-/operating-mode selection button

c) Temperature-setting button

d) Timer button

e) “-” Button

f) “+” Button

BEFORE THE FIRST USE

Space out the feet with the castors on the radiator base according to the diagram in the Figure. Place the radiator on a level, stable, and heat-resistant surface.

USING THE APPLIANCE

Connect the radiator to the power source. Switch the appliance on with the main power switch (F). After that, two buttons on the control panel light up: the timer and the power switch. The appliance will then be in the standby mode.

Press the power switch to turn on the radiator.

The radiator switches on in the Eco mode, and the target temperature is set at 23°C.

Temperature changing: Press the temperature-setting button, then press the + or - buttons to change to the required temperature. After setting to the required temperature, the radiator will switch to the Eco mode. The temperature can be set within the range 10-30°C and in the anti-freeze mode at 5°C.

Note: the temperature value on the display shows the set required temperature. This is not an ambient-temperature measurement.

Changing the operating mode: To change the heating mode, press the operating-mode-selection button:

The eco mode -> High power -> Medium power -> Low power. In the eco mode, the radiator adjusts the power to the ambient temperature. When one of the constant-power modes is used, the appliance will only operate at the selected power level. When the selected target temperature (default 23°C) is reached, it will switch off. When the temperature drops, the appliance will start heating again.

The eco mode: To activate the eco mode, press the operating-mode button until the eco mode is selected.

In this mode, the radiator adjusts the heating power to the ambient temperature. The smaller the difference between the required temperature and the ambient temperature the lower the power used to heat the room. If there is only one degree of difference, the radiator will operate in the low-power mode. When the difference is 3 degrees, the radiator will use the maximum power.

The radiator's delayed-switch-on function: The radiator should be in the standby mode. Press the timer button. The hour symbol (H) and the time (0) will appear on the display. Use the + or - buttons to select the expected switch-on-delay time of the radiator. In the range 0 to 5 hours, the increase is 0.5 hours, while above 5 hours to 24 hours the increase is 1 hour. After the selected time has elapsed, the appliance will start heating.

After setting the timer, you can set the radiator operating parameters by using the temperature-setting button or the operating-mode-selection button.

CAUTION: It is worth remembering that when using the radiator's delayed-switch-on function, the appliance can switch on when left unattended. Always observe all the safety instructions for the product's use.

The radiator's delayed-switch-off function: When the radiator is operating in one of the operating modes, press the timer button. The hour symbol (H) and the time (0) will appear on the display. Use the + or - buttons to select the expected switch-off-delay time of the radiator. In the range 0 to 5 hours, the increase is 0.5 hours, while above 5 hours to 24 hours the increase is 1 hour. After the selected time has elapsed, the appliance enters the standby mode.

Child lock: To activate the child lock, press and hold both the operating-mode-selection button and the power switch at the same time for 3 seconds. The buttons will be locked to prevent the accidental pressing of the control buttons. To unlock the control panel, press and hold both the operating-mode-selection button and the power switch at the same time again for 3 seconds.

Deactivating the audible signals when pressing the buttons: To deactivate the audible signals each time you press the control buttons, press and hold the + and - buttons at the same time for 3 seconds. To deactivate this function, press and hold the + and - buttons at the same time again for 3 seconds. Remote control: The buttons on the remote control correspond to the control panel's buttons, and perform the same functions.

OVERHEATING PROTECTION

The radiator is protected with overheating protection which automatically switches off the appliance if it intensely overheats. In that event, disconnect the appliance from the mains, wait approx. 30 minutes for the radiator to cool down, and rectify any possible cause of the overheating, e.g., something covering the radiator. Check the appliance, cable, and plug for damage. If no damage is observed, reconnect the appliance and switch it on, according to the manual. If the radiator does not switch on, contact the customer service for assistance.

CLEANING AND MAINTENANCE

During use, clean the appliance regularly according to the following instructions.

1. Disconnect the appliance from the power source, and let it cool down before cleaning.
2. Gently clean the appliance's external surface and control panel with a damp and lint-free cloth.
3. If there is dust in the appliance's slots, it is recommended to blow it out with a vacuum cleaner or blower.
4. Do not use strong detergents, chemical cleaners, or solvents.

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Enjoy it.