rab t13x - Drill SCHEPPACH - Free user manual and instructions
Find the device manual for free rab t13x SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hammer drill |
| Brand | Scheppach |
| Model | rab t13x |
| Rated power | 650 W |
| No-load speed | 0 – 2800 rpm |
| Number of speeds | Variable |
| Chuck | Self-tightening chuck 13 mm |
| Max. drilling diameter (wood) | 30 mm |
| Max. drilling diameter (metal) | 13 mm |
| Max. drilling diameter (concrete) | 13 mm |
| Weight | 1.7 kg |
| Power supply | 220 – 240 V, 50 Hz |
| Cable length | 2.5 m |
| Sound pressure level (LpA) | 86 dB(A) |
| Sound power level (LwA) | 97 dB(A) |
| Vibrations (drilling in metal) | 8.5 m/s² |
| Main functions | Drilling, hammer drilling, screwdriving |
| Rotation direction | Left/Right |
| Electronic speed control | Yes |
| Shaft lock | Yes |
| Maintenance and cleaning | Clean the ventilation slots with a soft brush; lubricate the chuck periodically |
| Safety | Switch with lock-on button, double insulation, auxiliary handle |
| Spare parts and repairability | Motor brushes, chuck, switch available from Scheppach after-sales service |
| General information | 54-page user manual in French included |
Frequently Asked Questions - rab t13x SCHEPPACH
How to change the chuck of the Scheppach rab t13x drill?
Unscrew the fixing screw located inside the chuck (clockwise), then remove the old chuck. Install the new one by hand-tightening and retighten the locking screw. Refer to the manual for more details.
What is the maximum drilling diameter in concrete?
The maximum drilling diameter in concrete for the rab t13x model is 13 mm.
How to adjust the drill speed?
Use the variable speed wheel on the trigger. Light pressure gives slow speed, harder pressure accelerates. For precise drilling, start at low speed and increase gradually.
The drill no longer starts, what to do?
First check the power supply (outlet, cable). If the cable is damaged, have it replaced by a professional. Check the motor brushes: if worn, replace them with original Scheppach parts.
Can I use the drill for screwdriving?
Yes, the rab t13x drill has a screwdriving function. Use a suitable bit and adjust the torque setting (if available) to avoid stripping screws. Set the direction selector to forward for screwing.
How to activate hammer mode?
Turn the mode selector located on top of the drill body to the hammer symbol. Make sure to use a drill bit suitable for hammer drilling (concrete). For normal drilling, set the selector to the drill bit symbol.
What is the power of the rab t13x drill?
The Scheppach rab t13x drill has a rated power of 650 watts, sufficient for common household tasks.
How to clean the drill?
Unplug the device. Clean the ventilation slots with a soft brush or dry cloth. Do not use solvents. For the chuck, apply a few drops of fine oil and run it empty to distribute the lubrication.
What accessories are included with the drill?
The box typically contains the drill, an auxiliary handle, a depth stop, a chuck, and sometimes a set of drill bits. Refer to the manual for the exact list of accessories.
How to change the rotation direction?
Use the direction selector located above the trigger. Push it to the left for clockwise rotation (screwing) and to the right for counterclockwise rotation (unscrewing). Never change direction while the device is running.
User questions about rab t13x SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual rab t13x - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. rab t13x by SCHEPPACH.
USER MANUAL rab t13x SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : rab t13x
Category : Drill