Flock Excellent Double - Air bed Outwell - Free user manual and instructions
Find the device manual for free Flock Excellent Double Outwell in PDF.
User questions about Flock Excellent Double Outwell
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Air bed in PDF format for free! Find your manual Flock Excellent Double - Outwell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Flock Excellent Double by Outwell.
USER MANUAL Flock Excellent Double Outwell
INFLATING INSTRUCTIONS
natural_image
Two black foam heat exchangers with grid patterns, one upright and one flat (no text or symbols visible)INFLATING INSTRUCTIONUK
IMPORTANT INFORMATION:
- Do not let inflatable products come in contact with sharp, pointed objects.
- Fill with cold air only. Never use a hair dryer to inflate, this could cause melting.
- Do not over inflate. Bursting items can cause serious injury. Inflate the airbed until most of the wrinkles in the material are gone and the bed feels firm to touch.
CAUTION:
Airbeds may experience a decrease in air pressure and softening during the initial use, which is due to the stretching of PVC material, not a leak. After several inflations, the air pressure and firmness will become stable. Air temperature and weather do affect the air pressure in inflatable products. In cold weather your airbed will lose some pressure due to the fact that the air will contract. If this occurs, you may want to add a little air to improve your airbed's performance.
TO OPEN/CLOSE VALVE
To Open: Pull out the base valve from the bed①, open the cover② and take out the stopper to release air③.
To Close: Reverse steps①,②&③ to close the valve and push the base valve into the bed.
INFLATION INSTRUCTION
To inflate using the Outwell® Pump.
To begin inflation open external cap and pull firmly on lanyard to extend out. This will open internal seal.
Attach nozzle to inflation end of pump. Insert nozzle and turn on.
When fully inflated seal valve by pushing in the pump nozzle. This will seal the internal stopper and keep air from escaping while closing cap.
Fully remove pump and close external stopper. Valve should appear depressed into itself,
DEFLATION INSTRUCTION
Pull out the base valve from the bed①, open the cover② and take out the stopper to release air③.
Do not puncture your airbed. Do not force air out of the airbed. Allow air to escape slowly and naturally. Fold carefully and re-insert into the carrier bag.
However, in hot weather, the air will expand. You must let some air out to prevent the airbed from failing due to overpressure. You should avoid exposing your airbed to extreme temperatures (hot or cold).
WARNING:
Read airbed instruction manual and follow the safety instructions to avoid serious injury or death.
Not for use by young children or people with limited disabilities. They may suffocate in a face down position or become trapped and suffocate in the gap between the airbed and adjacent furniture or wall. If the airbed is under inflated or deflates during use, this risk of suffocation may increase.
Do not let young children sleep on this airbed until they are mature enough to sleep in an adult bed. Young children can suffocate on adult beds (Including air-beds), particularly when sleeping next to another person. Ask your paediatrician for specific recommendations for your child.
Adult supervision required for inflation and deflation.
This airbed can melt or burn. Keep away from open flames, heaters, and other hot objects. Do not smoke on or near the airbed.
This airbed is not for use in water. It is not a life saving device, personal flotation device, or water toy.
This airbed is not a toy. Do not stand, walk, jump or play on the airbed. This can result in serious injury or damage to the airbed.
explore the outdoors
