Di4 Jet Pressing Digital - Iron

Jet Pressing Digital - Iron Di4 - Free user manual and instructions

Find the device manual for free Jet Pressing Digital Di4 in PDF.

📄 36 pages English EN Download 💬 AI Question
Notice Di4 Jet Pressing Digital - page 13
View the manual : Français FR Català CA English EN Español ES Português PT
Pick your language and provide your email: we'll send you a specifically translated version.

User questions about Jet Pressing Digital Di4

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Iron in PDF format for free! Find your manual Jet Pressing Digital - Di4 and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Jet Pressing Digital by Di4.

USER MANUAL Jet Pressing Digital Di4

WE WOULD LIKE TO THANK YOU FOR CHOOSING Di4. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

WARNING

PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.

DESCRIPTION

  1. Steam button
  2. Temperature adjustment knob
  3. Power button
  4. Steam Mode selection
  5. Iron lock
  6. Water tank

SAFETY INSTRUCTIONS

If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The appliance must not be left unattended while it is connected to the supply mains. Remove the plug from the socket before filling the appliance with water or before pouring out the remaining water after use. The appliance must be used and rested on a flat, stable surface. When placing the iron on its stand ensure that the surface on which the stand is placed is stable.

The iron is not be used if it has been dropped, if there are visible signs of damage or if it is leaking. With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorized Technical Service Centre. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the appliance and its cord out of reach of children under 8 years of age when it is turned on or cooling down. This appliance is designed only for household use up to 2000m above sea level.

Di4 Jet Pressing Digital - SAFETY INSTRUCTIONS - 1

CAUTION. Hot surface. Surface is liable to get hot during use.

The iron must not be stored until it has cooled. WAR-NING! Plastic bags can be dangerous. To avoid danger, keep plastic bags away from babies and children. Do not allow children to play with packaging materials. Suffocation hazard!

IMPORTANT WARNINGS

Carefully read through the operating instructions for the appliance and safeguard them for future reference. This appliance has been designed exclusively for normal household use in home environment. This appliance must be used only for the purposes for which it was designed, i.e. as an iron. Any other use will be considered improper and consequently dangerous. The manufacturer will not be held responsible for any damage arising from misuse or improper use. This appliance is to be connected and used in accordance with the information stated on its characteristics plate. This appliance must be connected to an earthed socket. If it is absolutely necessary to use an extension cable, make sure that it is suitable for 16A and has a socket with an earth connection. The mains connection cord must not be tangled or wrapped around the product during use. Do not use the device, or connect and disconnect to supply mains with the hands and / or wet feet. Do not pull on the connection cord in order to unplug it or use it as a handle. Do not direct steam at people and animals. The appliance must never be placed directly under the tap to fill the water tank. The electrical plug must not be removed from the socket by pulling the cable. Never immerse the appliance in water or any other liquid. Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.) This appliance reaches high temperatures and produces steam during use, this could cause scalds or burns if not used properly.

Do not allow the power cable to come into contact with the soleplate when it is hot. Unplug the appliance immediately from the mains in the event of any breakdown or damage, and contact and official technical support service. In order to prevent any risk of danger, do not open the appliance. Only qualified technical personnel from the brand's official technical support service may carry out repairs on the product. Proceed according to maintenance and cleaning section of this manual for cleaning.

B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

BEFORE THE FIRST USE

Before using the steam station, please ensure you read the user manual and understand all parts and features of the steam station. Be sure to remove any packaging material and labels before using for the first time.

During its first use the iron may produce certain vapours and odours that will die away after a few minutes. Do not steam for the first time on clothes and there may be traces of dirt on the soleplate.

OPERATING INSTRUCTIONS

According to the design, this product is suitable for tap water. If you live in an area where the water quality is hard, limescale accumulates very quickly. Therefore, it is recommended to use distilled water or softened water to extend the life of the product.

Before using the equipment, find the water filling port, and pour an appropriate amount of water into the water tank, not exceeding the MAX water level. Adjust the temperature adjustment knob to the required gear, connect the device with the power cord, select the required working temperature. The indicator will flash for 90 seconds and then remain steady. Once the light is steady, select the steam supply mode using the MODE button. Pressing the MODE button, you can switch the steam supply mode from maximum to ECO. The corresponding indicator will light up.

Attention! After the device has steamed for a total of 2 hours, the self-cleaning indicator will start flashing, signaling that it is time to perform self-cleaning.

Steam ironing

Type of textile Marking Vapor
Linen-CottonMÁX / ...[DGBA]
Cupro, polyester, silk, triacetate, viscose, wool..Di4 Jet Pressing Digital - OPERATING INSTRUCTIONS - 1
Acetate, elastane, polyamide, polypropylene.Di4 Jet Pressing Digital - OPERATING INSTRUCTIONS - 2

NOTE: The fabrics with this logo are ironable fabrics, such as linen, cotton, polyester fiber, silk, wool, viscose, and rayon.

Fabrics with this logo are non-ironable fabrics. Such fabrics include synthetic fibers, such as spandex or elastic fibers, spandex hybrid fibers, and polyolefins (such as polypropylene). The printed cloth on clothing is also not ironable.

NOTE: The first use of the steam iron will delay the production of steam due to some air in the steam hose, but don't worry about it will be normal after about 30 seconds.

Toggle the iron lock to unlock the iron from the base.

Press and hold the steam button to enter the continuous steaming state and start ironing.

You can use the steam iron vertically to remove the wrinkles from hanging clothes.

Stand the iron up, press the steam switch and touch the clothes with the soleplate, then move the iron up and down.

Note: Do not use the steam at people or animals to avoid burns.

To get the best ironing effect, please iron a few times without steam at the end after using steam ironing.

Each time the steam switch is pressed, the pump is activated. There will be a slight creaking sound, which is normal. When there is no water in the water tank, the pumping sound will be louder. Please add water to the water tank. When ironing is no longer needed, please do not turn off the power immediately. You must wait until the soleplate of the iron no longer releases steam before turning off the power, otherwise the soleplate of the iron will have steam or water droplets sprayed out when the power is turned on next time.

CLEANING & MAINTENANCE

1. Iron lock

The easy carry locker attached to the base unit can be used to transport the steam Station with ease. To do so, lift it in an upward motion until it clicks into position.

2. Cleaning the appliance

Turn off the Steam Station and unplug at the power outlet. Empty the water tank. Regularly clean the ceramic soleplate with a damp, non-metallic washing pad. Wipe the exterior of the Steam Station with a soft cloth.

Do NOT use abrasive cleaners, detergent or other chemicals to clean the Steam Station. Regularly clean your appliance for properly maintenance.

Attention! Burn risk!

To keep the soleplate smooth, you should avoid contact with hard metal objects. Never use a scouring pad, or chemicals to clean the soleplate.

3. Self-cleaning mode

After you have finished ironing, you can perform the self-cleaning procedure. Press the steam mode selection button for 5 seconds.

The self-cleaning indicator will start flashing continuously and the pump will start pumping water to clean the work surface. The entire self-cleaning process takes about 2 minutes. Once the process is complete, the device will automatically turn off.

TROUBLESHOOTING GUIDE

PROBLEM POSSIBLE CAUSE SOLUTION
Unit fails to heat up and steam. Power indicator light does not illuminate.Unit is not plugged in. Plug into electrical outlet.
Water runs out of the holes in the soleplate.Water has condensed in the pipes because you are using for the first time or you have not used it for some time.Press the steam trigger away from your ironing board until the iron produces steam.
The soleplate is not hot enough.Wait until the iron soleplate is hot enough.
Brown streaks come through the holes in the soleplate and stain the linen.You are using chemical des-caling agents or additives in the water for ironing.Never add this type of pro-duct in the water tank or in the steam chamber.
There is no steam or there is little steam.The water tank is empty. Fill the water tank.
The soleplate is not hot enough.Wait until the iron soleplate is hot enough

PRODUCT DISPOSAL

Di4 Jet Pressing Digital - PRODUCT DISPOSAL - 1

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this pro-duct in the bin, instead going to the

electrical and electronic waste collection center closest to your home.

Information related to power consumption in the off and standby modes, as well as in the network standby mode of the appliance pursuant to EU Regulation 2023/826 can be found at the following link: https://di4-home.com/pages/ecodesign-info

FRANÇAIS

NOUS AIMERIONS VOUS REMERCIER D'AVOIR CHOISI Di4. NOUS ESPÉRONS QUE CE PRODUIT RÉPONDRA À VOS BESOINS ET À VOS GOÛTS.

AVERTISSEMENT

VEUILLEZ LIRE ATTENTIVEMENT LES INSTRUCTION AVANT D'UTILISER LE PRODUIT. CONSERVEZ-LES DANS UN ENDROIT SÛR POUR POUVOIR LES CONSULTER ULTÉRIEUREMENT.

DESCRIPTION

MISE AU REBUT DU PRODUIT

Di4 Jet Pressing Digital - MISE AU REBUT DU PRODUIT - 1

B&B TRENDS, SL. guarantees compliance of this product, for the use for which it is, during the period established by the legislation in force in the country of sale. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfil or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorised by B & B TRENDS, SL. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY

Customers must contact a B&B TRENDS, SL., authorised Technical Service for repair of the product. Since any tampering of the same by anyone not authorised by B&B TRENDS, SL., or the careless or improper use of the same shall render this warranty null and void. You must keep the purchase invoice, receipt or delivery docket in order to exercise your warranty rights. For technical service and after-sales care outside the Spanish territory, please submit your query to the point of sale where you purchased the item.

BON DE GARANTIE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Di4

Model : Jet Pressing Digital

Category : Iron