TUCSAC A1 - Charging station TRONIC - Free user manual and instructions

USER MANUAL TUCSAC A1 TRONIC

5,0 V = 3,0 A, 15,0 W 9,0 V = 2,0 A, 18,0 W 12,0 V = 1,5 A, 18,0 W

4 + 5 ): 4,0 A, 23,0 W max.

(C2+A1+A2+A3)

Warnings and symbols used .... Page 34

Short Manual Page 37

Intendeduse......Page 38

Trademarknotices......Page 39

Scopeofdelivery......Page 39

Safety notices Page 39

Description of parts......Page 46

Technical data Page 47

Before use ...... Page 50

Operation and use......Page 50

Connecting the charger to the

power supply......Page 51

Connecting your devices....Page 51

Disconnectingyourdevice .... Page 52

Disconnect from the power supply......Page 52

Disposal Page 52

Warrenty and service......Page 54

Warranty Page 54

Warranty claim procedure......Page 56

Service......Page 57

Warnings and symbols used

The symbols shown are used in the operating instructions, on the packaging and on the unit.

DANGER! This symbol with the signal word "DANGER" indicates a hazard with a high level of risk which, if not avoided, will result in serious injury or death.

WARNING! This symbol with the signal word "WARNING" indicates a hazard with a medium level of risk which, if not avoided, will result in serious injury or death.

CAUTION! This symbol in combination with “CAUTION” marks a low-risk hazard that if not prevented could result in minor or moderate injury.

ATTENTION! This symbol in combination with the signal word “ATTENTION” indicates a possible property damage.

NOTE: This symbol in combination with “NOTE” provides additional useful information.

Use product only in dry indoor areas.

	Safety class II The product has double insulation and no safety connection with grounding is required.
	Alternating current / voltage
	Direct current / voltage
	Power Delivery (PD), introduced by the USB Implementers Forum, Inc., is a specification for handling higher power and allows quick charging over a USB connection.
	CE mark indicates conformity with relevant EU directives applicable for this product.
	This symbol means that the operating instructions must be observed before using the product.
	Safety instructionsInstruction for use

USB CHARGING HUB

●Short Manual

This document is a shorter printed version of the complete instruction manual. Scanning the QR code takes you straight to the Lidl service website (www.lidl-service.com) where you can view and download the complete instruction manual by entering the article number (IAN) 512391_2501.

The short guide forms an integral part of this product. Prior to using the product, familiarize yourself with all operation and safety notes. Store

the short guide in a safe place, and if you give the product to third parties, all documentation should be passed on to them as well.

Intendeduse

This USB CHARGING HUB (hereinafter called „product“) is an information technology device designed for charging and operating USB devices that are charged or operated from a USB port by default. The used PD (Power delivery) technology reduces the charging time on compatible devices. Compatible connected devices are automatically detected and supplied with the appropriate output voltage and current from the USB charger.

The product is not intended for commercial use. The manufacturer is not liable for any damages caused by any use other than for the intended purpose.

Trademark notices

USB ^® is a registered trademark of USB Implementers Forum, Inc.

The TRONIC trademark and trade name is the property of their respective owners.

Any other names and products are trademarks or registered trademarks of their respective owners.

Scopeofdelivery

1 x USB charging hub
1 x Power cable
1 x Stand
1 x Instructions for use

⚠️Safetynotices

PLEASE READ THE INSTRUCTIONS PRIOR TO USE! PLEASE KEEP THE INSTRUCTIONS IN A SAFE PLACE!

- Check the product for damage before use. Never use a damaged product.

DANGER! RISK OF DEATH AND ACCIDENTS FOR TODDLERS AND CHILDREN!

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product.

■ Cleaning and user maintenance shall not be made by children without supervision.

Packaging materials are not a toy. Never leave children unsupervised with the packaging material. Children frequently underestimate the dangers. Always keep children away from the packaging material.

Suitable for indoor use only. Do not expose the product to direct sunlight or moisture.

DANGER!

■ Danger to life due to electric shock! Keep the product away from moisture, damp areas, dripping and splashing water!

■ Never open the product. There is the risk of electrical shock, if the product is open.

■ Refer all servicing to qualified personnel. Servicing is required when the product has been damaged in any way, such as liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING!

■ Unplug the product during lightning storms or when unused for long periods of time.

Grip the power plug every time directly whenever you want to pull it from the mains socket. Do not pull on the power cable itself.

■ Never touch the power plug with wet hands, as this could result in either a short circuit or electric shock.

- Do not place any furniture or similar items on the power cable and ensure that it cannot become trapped.

■ Never tie knots in the power cable and do not bind it together with other cables.

A damaged power cable or power plug can cause fire or electric shock. Check the power cable and power plug regularly. Do not use a damaged power cable or power plug.

■ The mains socket used must be easily accessible so that the power plug can be quickly disconnected in an emergency.

To completely disconnect the product from the power, you must remove the power plug from the mains socket. The power plug serves as a separator. At standby mode, a minor power is consumed.

If you notice any unusual noise, smoke or similar uncertain situations, immediately disconnect the power plug from the mains socket and disconnect all connected devices. Have the product checked by a qualified person before using it again.

WARNING!

■ Before operating this product, check the input voltage of this product to see if it is identical to the voltage of your local power supply.

■ Never open the housing of the product! It has no internal parts requiring maintenance.

■ Unplug the product from the mains socket before cleaning.

- Do not cover the product during operation. Otherwise the product can be overheated.

ATTENTION! RISK OF PROPERTY DAMAGE

This product does not contain any parts which can be serviced by the user.

- Do not place burning candles or other open fire on or next to the product.

- Check the product and accessories for damage before each use. Never use a damaged product.

- Do not operate the product near heat sources, e.g. radiators or other devices emitting heat!

ATTENTION! Ensure that:

■ the product is not exposed to bright artificial light.

■ any contact with splashed and dripping water and corrosive liquids is avoided and the product are not operated in the vicinity of water. In particular,

the product should never be submerged in liquid; do not place any vessels filled with liquid, for example, vases or drinks, on or near the product.

■ the product is not used in the immediate vicinity of magnetic fields (e.g. speakers).

■ no foreign objects penetrate the product.

■ the product is never subjected to extreme temperature fluctuations as this could result in condensation and electrical short circuits. If the product were subjected to extreme temperature fluctuations, however, wait (approx. 2 hours) until the product has reached ambient temperature before use.

■ the product is never subjected to excessive shocks and vibrations.

■ the connected cables are always laid in such a manner that nobody can step on or trip over them. There is a risk of injury.

■ no objects are placed on a cable and cables are not connected over sharp edges because they could be damaged.

■ the power cable is protected from being walked on and pinched or kinked particularly at plugs, convenience receptacles, and the point where they exit from the product.

● Description of parts

1 USB Port C1/C2, (PD 3.0)
2 USB Port A1/A2/A3, Type A 2.0
3 Power cable socket
4 Stand
5 Power cable connector
6 Power cable
7 Power plug

●Technicaldata

Manufacturer's name or trade mark, commercial registration number and address:

OWIM GmbH & Co. KG

HRA 721742

Input voltage and current:

100 - 240V \~ , 0.65A

Input AC frequency:

50 / 60 Hz

Output USB Type C1/C2 (PD* port

1 or PD* port 2):

5.0V ---, 3.0A, 15.0W

9.0V=2.0A, 18.0W

12.0V=1.5A, 18.0W

Output USB Type A1/A2/A3 (Port

3 or 4 or 5):

5.0V ---, 2.4A, 12.0W

Output USB Type C1+C2 (PD* port 1 or PD* port 2):

4.5A, 25.5W Max. (C1+C2)

Output USB Type

C1+C2+A1+A2+A3 (PD* port

( 1 + 2 )+USB Type A port ( 3 + 4 + 5 )):

5.5A, 30.5W Max.

(C1+C2+A1+A2+A3)

Output USB Type C1+A1+A2+A3

(PD* port 1 or 2 +USB Type A

port 3 + 4 + 5 ):

5.4A, 30.0W Max.

(C1+A1+A2+A3)

Output USB Type A1+A2+A3

(port 3 + 4 + 5):

2.4A, 12.0W Max. (A1+A2+A3)

Output USB Type C2+A1+A2+A3

(PD ^* port 1 or 2 +USB Type A

port 3 + 4 + 5 ): 4.0A, 23.0W

Max. (C2+A1+A2+A3)

Average active efficiency:

81.14%

Efficiency at low load (10 %):

69.68%

No-load power consumption:

0.15W

Protection class:

|| / □

Dimensions:

approx. 88 x 62 x 29 mm

Weight (main device):

approx. 155 g

Operating temperature:

0 - 25°C

Storage temperature:

0 - 45 °C

Humidity (no condensation):

10 - 70 %

Length of power cable:

approx. 1.2 m

*Power Delivery (PD) is a cutting edge technology which enables extremely fast charging for all PD-compatible devices, including Apple

iPhone and Samsung Android mobile devices.

NOTE:

The specification and design may be changed without notification.

●Before use

NOTE:

All parts have to be unpacked and the packaging material has to be removed completely.

Before use, verify the package contents are complete and undamaged!

If you notice any damage or missing parts, please contact the dealer who sold this product.

● Operation and use

ATTENTION! If you use the

product under max. loading condition, the product may get hot. This is normal because in this condition, the product uses more power and therefore generates more heat.

• Connecting the charger to the power supply

☐ Connect the power cable connector 5 to the power cable socket 3.

☐ Insert the power plug into an easily accessible mains socket. The requirements for the voltage can be found in the “Technical data” section.

Connecting your devices

☐ If your device to be charged is equipped with the PD (Power delivery) technology, connect the device's USB plug into USB Port C (PD) 1.

☐ For devices without PD (Power delivery) technology, connect devices USB-A plugs into one of the other USB Ports A1/ A2/ A3 2. The optimum charging voltage / charging current for the connected device is set automatically.

- Disconnecting your device

After charging is complete, simply unplug your device's USB plug from the product.

- Disconnect from the power supply

☐ Grip the power plug and unplug it from the mains socket. Do not pull on the power cable 6.

●Disposal

Packaging:

The packaging is made of environmentally friendly materials, which may be disposed of through your local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7:

plastics / 20-22: paper and fibreboard / 80-98: composite materials.

Product:

Contact your municipality for information on how to dispose of your worn-out product.

The adjacent symbol of a crossed out dustbin on wheels indicates this product is subject to Directive 2012/19/EU. This directive states at the end of the life this product must not be disposed of through regular household refuse but must be returned to special collection sites, recycling depots or waste management companies.

This disposal is free of charge to you.

Protect the environment and dispose of properly.

FR

The product incl. accessories and packaging materials are recyclable and are subject to extended producer responsibility. Dispose them separately, following the illustrated Info-tri (sorting information), for better waste treatment. The Triman logo is valid in France only.

●Warranty and service

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have

legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.

Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.

Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts.

This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Warrantyclaim procedure

To ensure quick processing of your claim, observe the following instructions:

Make sure to have the original sales receipt and the item number (IAN 512391_2501) available as proof of purchase.

You can find the item number on the rating plate, an engraving on the product, on the front page of the instruction manual (bottom left), or as a sticker on the rear or bottom of the product.

If functional or other defects occur, contact the service department listed below either by telephone or by e-mail.

Once the product has been recorded as defective you can return it free of charge to the service address that will be provided to you. Ensure to enclose the proof of purchase (sales receipt) and a short, written description outlining the details of the defect and when it occurred.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

E-Mail: [e-mail]

CE

9,0 V = 2,0 A, 18,0 W

12,0 V = 1,5 A, 18,0 W

Sortie USB type A1/A2/A3 (port

3 ou 4 ou 5):

(1 + 2) + port USB type A (3 +

4 + 5):

5,5 A, 30,5 W Max.

(C1+C2+A1+A2+A3)

Sortie USB type C1+A1+A2+A3

(port PD* 1 ou 2 + port USB

type A 3 + 4 + 5):

5,4 A, 30,0 W Max.

(C1+A1+A2+A3)

Sortie USB type A1+A2+A3

(port 3 + 4 + 5):

2,4 A, 12,0 W Max. (A1+A2+A3)

Sortie USB type C2+A1+A2+A3

(port PD* 1 ou 2 + port USB

(poort 3 of 4 of 5):

5,0 V = 2,4 A, 12,0 W

Uitgang USB-type C1+C2 (PD*-poort 1 + PD*-poort 2): 4,5 A, 25,5 W Max. (C1+C2) 

Uitgang USB-type
C1+C2+A1+A2+A3 (PD*-poort
(1 + 2)+USB Type A-poort (3
+ 4 + 5)):
5,5 A, 30,5 W Max.
(C1+C2+A1+A2+A3) 

Uitgang USB Type C1+A1+A2+A3 (PD*-poort 1 of 2 + USB Type A-poort 3 + 4 + 5): 5,4 A, 30,0 W Max. (C1+A1+A2+A3) 

Uitgang USB-type A1+ A2+ A3
(poort 3 + 4 + 5):
2,4 A, 12,0 W Max. (A1+A2+A3) 

Uitgang USB Type C2+A1+A2+A3 (PD*-poort 1 of 2 + USB Type A-poort 3 + 4 + 5): 4,0 W, 23,0 W Max. (C2+A1+A2+A3) 

9,0 V = 2,0 A, 18,0 W

12,0 V = 1.5 A, 18,0 W

Wyjście USB Type A1/A2/A3 (port

3 lub 4 albo 5):

5,0 V = 2,4 A, 12,0 W

Wyjście USB Type C1 + C2 (PD*

+ A2 + A3 (PD* port (1 + 2) +

port USB Type A (3 + 4 + 5)):

5,5 A, 30,5 W Maks.

(C1+C2+A1+A2+A3)

23,0 W Maks. (C2+A1+A2+A3)

5,0 V --- 3,0 A, 15,0 W

9,0 V = -2,0 A, 18,0 W

12,0 V=1,5 A, 18,0 W

Výstup USB Type A1/A2/A3 (port

3 nebo 4 nebo 5):

(1 + 2) + port USB Type A (3 +

4 + 5):

5,5 A, 30,5 W Max.

(C1+C2+A1+A2+A3)

Výstup USB Type C1+A1+A2+A3

(port PD* 1 nebo 2 +port USB

Type A 3 + 4 + 5):

5,4 A, 30,0 W Max.

(C1+A1+A2+A3)

Výstup USB Type A1+A2+A3 (port

3 + 4 + 5):

2,4 A, 12,0 W Max. (A1+A2+A3)

23,0 W Max. (C2+A1+A2+A3)

5,0 V = 3,0 A, 15,0 W

9,0 V = 2,0 A, 18,0 W

12,0 V = 1,5 A, 18,0 W

pribl. 88 x 62 x 29 mm

USB Tipo C1/C2 de salida
(Puerto PD* 1 o puerto PD* 2):
5,0 V = 3,0 A, 15,0 W
9,0V = 2,0A, 18,0W
12,0V = 1,5A, 18,0W 

USB Tipo A1/A2/A3 de salida (Puerto 3, 4 o 5): 5,0 V = 2,4A, 12,0W 

USB Tipo C1+C2 de salida (Puerto PD* 1 o puerto PD* 2): 4,5 A, 25,5 W máximo (C1+C2) 

USB Tipo C1+C2+A1+A2+A3 de salida
(Puerto PD* [1 + 2]+Puerto USB
Tipo A [3 + 4 + 5]):
5,5 A, 30,5 W máximo
(C1+C2+A1+A2+A3) 

USB Tipo C1+A1+A2+A3 de salida
(Puerto PD* 1 o 2 + Puerto USB
Tipo A 3 + 4 + 5):
5,4 A, 30,0 W máximo
(C1+A1+A2+A3) 

(Puerto PD* 1 o 2 + Puerto USB

5,0 V --- 3,0 A, 15,0 W

9,0 V=2,0 A, 18,0 W

12,0 V=1,5 A, 18,0 W

Udgang USB Type A1/A2/A3 (Port 3 eller 4 eller 5):

5,0 V = 2,4 A, 12,0 W

Udgang USB Type C1+C2 (PD*

port 1 + PD* port 2):

4,5 A, 25,5 W Maks. (C1+C2)

Udgang USB Type

C1+C2+A1+A2+A3 (PD* port

(1 + 2) + USB Type A-port (3

+ 4 + 5 ):

5,5 A, 30,5 W Maks.

(C1+C2+A1+A2+A3)

Udgang USB Type C1+A1+A2+A3

(PD*-port 1 eller 2 + USB Type

A-port 3 + 4 + 5):

5,4 A, 30,0 W Maks.

(C1+A1+A2+A3)

Udgang USB Type A1+A2+A3

(Port 3 + 4 + 5):

2,4 A, 12,0 W Maks. (A1+A2+A3)

Udgang USB Type C2+A1+A2+A3

(PD*-port 1 eller 2 + USB Type

23,0 W Maks. (C2+A1+A2+A3)

5,0 V = 3,0 A, 15,0 W

9,0 V=2,0 A, 18,0 W

12,0 V=1,5 A, 18,0 W

5,0 V = 2,4 A, 12,0 W

Uscita USB tipo C1+C2 (porta PD*

1 + porta PD* 2):

4,5 A, 25,5 W Max. (C1+C2)

23,0 W Max. (C2+A1+A2+A3)

circa 88 x 62 x 29 mm

5,0 V = 3,0 A, 15,0 W 9,0V = 2,0A, 18,0W 12,0V = 1,5A, 18,0W

Kimenet USB Type A1/A2/A3

23,0 W Max. (C2+A1+A2+A3)