TLD-20 - Fabric room divider Vevor - Free user manual and instructions

Find the device manual for free TLD-20 Vevor in PDF.

Vevor TLD-20 - Fabric room divider
📄 96 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Vevor TLD-20 - page 1
1 / 96
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Textile screen / Fabric partition
Brand Vevor
Model TLD-20
Color Blue
Dimensions (L x W x H) 1710 x 390 x 1860 mm
Frame material Metal (steel)
Panel material Fabric (textile)
Casters 8 pulleys (casters)
Assembly required Yes, by 2 people minimum
Recommended use Indoor, on flat, hard, smooth surface
Load capacity Do not sit or stand on it
Safety Inspect before each use; do not use if parts are loose or damaged
Care and cleaning Wipe with a soft, dry cloth; do not use abrasive products
Spare parts Contact after-sales service via www.vevor.com/support
Warranty Technical support and electronic warranty certificate at www.vevor.com/support
Manufacturer Shanghaimuxinmuyeyouxiangongsi, Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN
Importer (Australia) SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Importer (United States) Sanven Technology Ltd, Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Representative (United Kingdom) 60329 Frankfurt am Main

Frequently Asked Questions - TLD-20 Vevor

How to assemble the Vevor TLD-20 room divider?
Assembly requires at least 2 people. Follow the steps in the manual: install the 8 pulleys, then use two screwdrivers to tighten all screws. Wear gloves and safety glasses.
What are the dimensions of the TLD-20?
Approximate dimensions are 1710 x 390 x 1860 mm (L x W x H), similar to the TLD-18 model.
How to clean the fabric screen?
Wipe the fabric panels with a soft, dry cloth. Avoid abrasive products or excessive water. For stubborn stains, use a slightly damp cloth then dry immediately.
Can I use this screen outdoors?
No, this screen is designed for indoor use only. It must be placed on a flat, hard, smooth surface.
Is the screen stable?
Yes, if assembled correctly on a flat surface. Do not sit or stand on it. Regularly check that all screws are tight.
How to install the casters?
The 8 pulleys (casters) are installed following step 1 of the manual. Make sure the holes are facing inward as shown in the diagram.
Is there a warranty?
Yes, Vevor offers technical support and an electronic warranty certificate available at www.vevor.com/support.
Can I paint the frame?
It is not recommended to paint the metal frame as it may void the warranty. If you want to customize it, contact after-sales service.
Is the screen easy to move?
Yes, thanks to the 8 casters, it can be moved easily on flat surfaces. Be careful not to pull it abruptly.
What if a part is missing?
Contact Vevor after-sales service via www.vevor.com/support to get replacement parts. Keep the proof of purchase.

User questions about TLD-20 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Fabric room divider in PDF format for free! Find your manual TLD-20 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TLD-20 by Vevor.

USER MANUAL TLD-20 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

FABRIC ROOM DIVIDER

USER MANUAL

TLD-18

TLD-19

TLD-20

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

FABRIC ROOM DIVIDER

TLD-18 TLD-19 TLD-20

Line drawing of a four-panel industrial machine frame with wheels and railings (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

  1. Assemble only according to these instructions. Improper assembly can create hazards.
  2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
  3. Keep the assembly area clean and well-lit.
  4. Keep bystanders out of the area during assembly.
  5. Do not assemble if tired or when under the influence of alcohol, or medication.
  6. The product capabilities apply to properly and completely assembled products only.
  7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Fabric Room Divide.
  8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

  1. DO NOT SIT OR STAND ON THIS ITEM.
  2. This product is not a toy. Do not allow children to play with this item.
  3. Do not exceed specified weight capacities.
  4. Use only on a flat, level, hard, and smooth surface that can safely support a fully loaded Fabric Room Divider.
  5. Use as intended only.
  6. Inspect before every use; do not use if parts are loose or damaged.

SAVE THIS MANUAL

Vevor TLD-20 - SAVE THIS MANUAL - 1

ASSEMBLY STEP

WARNING: Please assemble safely.

Please have more than 2 people carry out the assembly to ensure working space and safe operation. When assembling, please wear gloves to prevent injury.

STEP 1: Install 8 pulleys.Diagram illustrating a mechanical assembly process with labeled parts and directional arrows indicating motion.

STEP 2Install 2 sets ① ⑨

STEP 3: Please use two screwdrivers to tighten all the screws.No holes ① ⑤ ⑩ ⑪ ⑪ ⑫ No holes

The hole is facing inward.

STEP 4

Please use two screwdrivers to tighten all the screws.

10 4 11 8 t 10 4 11

STEP 5Technical diagram of a mechanical assembly with numbered components and directional arrow indicating assembly motion

Please use two screwdrivers to tighten all the screws.

STEP 6No holes No holes 3 10 11 10 11 10 11 No holes

Please use two screwdrivers to tighten all the screws.

STEP 7

Please use two screwdrivers to tighten all the screws.

Technical diagram of a mechanical assembly with numbered components and directional arrows indicating motion or assembly.

PRODUCT PARAMETER

ModelColourProduct Size
TLD-18Light Grey1710*390*1860mm
TLD-19Dark Grey
TLD-20Blue

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

STEP 2

Install 2 sets

PRODUCT PARAMETER

YH CONSULTING LIMITED. C/O YH Consulting

Limited Bureau 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC REPRESENTATIVE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

Fabric Room Divider

User Manual

TLD-18

TLD-19

TLD-20

STEP 2

Technical diagram of a mechanical assembly with numbered components and labeled parts, including a central circular component with force vectors.

STEP 5Technical diagram of a mechanical assembly with numbered components and directional arrow indicating motion or assembly.

PRODUCT PARAMETERS

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

Vevor TLD-20 - User Manual - 3

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

FABRIC DIVIDER

USER MANUAL

TLD-18

TLD-19

TLD-20

STEP 2Install 2 sets.

PRODUCT PARAMETER

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Representation of the United Kingdom.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

Vevor TLD-20 - USER MANUAL - 3

VEVOR®

TOUGH TOOLS, HALF PRICE

STEP 2

Technical diagram of a mechanical assembly with numbered components and directional arrows indicating assembly steps.

PRODUCT PARAMETER

Road, Staines-upon-Thames, Surrey, TW18 4AX

CE REPRESENTATIVE

E-CrossStu GmbH

NEED HELP? CONTACT US!

STEP 2

Technical diagram of a mechanical assembly with numbered components and labeled parts, including a central circular component with force F and displacement t.

STEP 5Technical diagram of a mechanical assembly with numbered components and directional arrows indicating assembly steps.

PRODUCT PARAMETER

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

FABRIC ROOM DIVIDER

USER MANUAL

TLD-18

TLD-19

TLD-20

NEED HELP? CONTACT US!

STEP 2

1 9 Install 2 sets

PRODUCT PARAMETER

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC-REP

E-CrossStu GmbH

Mainzer Landstr.69,

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TYG RUMMET AVDELA

USER MANUAL

TLD-18

TLD-19

TLD-20

NEED HELP? CONTACT US!

STEP 2

Install 2 sets ① ⑨

PRODUCT PARAMETERS

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : TLD-20

Category : Fabric room divider