CLDMFGBS02 - Fabric room divider Vevor - Free user manual and instructions

Product Type	Textile Room Divider
Brand	Vevor
Model	CLDMFGBS02
Color	Brushed Brown
Number of Panels	2 (estimated from assembly steps)
Height (estimated)	2455 mm
Total Width (estimated)	2057 mm (for 2 panels)
Depth (estimated)	450 mm
Frame Material	Steel
Screen Material	Textile Fabric
Assembly Required	Yes, with included tool (G wrench)
Approximate Weight	8-12 kg
Main Functions	Interior space division, privacy creation
Usage Precautions	Do not sit or stand, do not overload, use on a flat surface
Care and Cleaning	Clean with a damp cloth, avoid abrasive products
Spare Parts	Available via Vevor support (www.vevor.com/support)
Warranty	Electronic warranty certificate available online
Safety	Read the manual before use, wear gloves and goggles during assembly
Repairability	Spare parts available, online technical support

Frequently Asked Questions - CLDMFGBS02 Vevor

How to assemble the Vevor CLDMFGBS02 room divider?

Follow the steps in the manual: first assemble the vertical rods (A+B+C) into two groups, then the cross bars (D+E). Insert fabric H into the cross bars, then attach everything to the vertical rods. Use tool G to tighten the screws. Wear gloves and safety goggles.

What are the exact dimensions of the room divider?

The exact dimensions are not specified for model CLDMFGBS02 in the manual, but based on the 1-panel model (CLDMFGMS01) and the estimated number of panels (2), the height is approximately 2455 mm, total width approximately 2057 mm, and depth 450 mm.

Is the room divider easy to disassemble?

Yes, disassembly follows the reverse steps of assembly. Unscrew the screws with tool G, remove the cross bars and vertical rods. The fabric can be folded carefully.

Can I sit or stand on the room divider?

No, it is strictly forbidden to sit or stand on the room divider. The product is not designed to support human weight and may tip over or break, causing injury.

How to clean the textile room divider?

Clean the fabric with a damp cloth and mild detergent if necessary. Avoid abrasive products or machine washing. The metal frame can be wiped with a dry cloth.

What is the maximum weight supported by the room divider?

The manual does not specify an exact weight capacity, but it is not recommended to exceed the intended use (light separation). Do not hang heavy objects on it. Use it only as a partition.

Is the room divider stable on carpet?

Yes, it can be used on carpet, but make sure the surface is flat and firm. The feet (part F) provide good stability. If necessary, adjust the feet for better balance.

Where can I find spare parts?

Spare parts are available by contacting Vevor support via www.vevor.com/support. Have your model number (CLDMFGBS02) and the parts list from the manual ready.

Does the room divider come with a warranty?

Yes, an electronic warranty certificate is available on www.vevor.com/support. Keep your proof of purchase to claim the warranty.

Can I use multiple room dividers together?

Yes, you can purchase multiple units to create a larger partition. Each room divider is independent and can be placed side by side or at an angle to form a custom separation.

USER MANUAL CLDMFGBS02 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

FABRIC ROOM DIVIDER

USER MANUAL

CLDMFGMS01

CLDMFGBS02

CLDMFGSH03

CLDMFGHS04

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are actually saving half in comparison with the top major brands.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so may result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly may create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of supporting the Fabric Room Divide.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or item.
3. Do not exceed specified weight capacities.
4. Use only on a flat, level, hard, and smooth surface that can safely support a fully loaded Fabric Room Divide.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.

SAVE THIS MANUAL

PARTS LIST

A+B+C		2
D		4
E		2
F		2
G		1
H		2+1
I		1
NOTE: H is the fabric of the screen, pay attention not to g when installing.

ASSEMBLY STEP

STEP 1

Take materials A+B+C and assemble them in order, making a total of 2 groups of vertical rods.

STEP 2

Take materials D+E and assemble them in sequence. There are 2 groups in total, which are 2 groups of cross bars.

STEP 3

Take the two groups of cross bars from step 2 and disassemble the sheets at both ends using tool G, as shown in the figure.

STEP 4

Take the first set of horizontal rods from Step 3 and insert them into the vertical rods, as shown in the figure.

STEP 5

Take the two sets of vertical rods from step 1, lay them flat, and place the bar with the curtain and the other set of horizontal rods at the place where the vertical rods are marked, as shown in the figure.

STEP 6

Install the iron sheet taken out in step 3 as shown in the figure (the clasp should be stuck when closing), then insert the screw and tighten it through tool G.

STEP 7

Take material F and insert it into the bottom of the vertical rod as shown in the picture, then insert the screw and tighten it through tool G, which is spare.

STEP 8

STEP 9

PRODUCT PARAMETER

Model	Colour	Number of Panels	Product Size
CLDMFGMS01	Creamy White	1	3085*450*2455mm
CLDMFGBS02	Brownness
CLDMFGSH03	Gray
CLDMFGHS04	Black

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

STEP 9

PRODUCT PARAMETER

YH CONSULTING LIMITED. C/O YH Consulting

Limited Bureau 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT

DE LA CE

E-CrossStu GmbH

Mainzer Landstr. 69,

www.vevor.com/support

Fabric Room Divider

USER MANUAL

CLDMFGMS01

CLDMFGBS02

CLDMFGSH03

CLDMFGHS04

STEP 9

PRODUCT PARAMETERS

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

FABRIC DIVIDER

USER MANUAL

CLDMFGS01

CLDMFGBS02

CLDMFGSH03

CLDMGHS04

STEP 9

PRODUCT PARAMETER

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

STEP 9

PRODUCT PARAMETER

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

NEED HELP? CONTACT US!

STEP 9

PRODUCT PARAMETER

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

ROOM DIVIDER

USER MANUAL

CLDMFGMS01

CLDMFGBS02

CLDMFGSH03

CLDMFGHS04

NEED HELP? CONTACT US!

STEP 9

PRODUCT PARAMETER

Model Kleur		Aantal Panelen	Productgrootte
CLDMFGMS01	Romig Wit	1	3085*450*2455mm
CLDMFGBS02	Bruinheid
CLDMFGSH03	Grijs
CLDMFGHS04	Zwart

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd. Address:

Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr. 69,

Warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TYG RUMMET AVDELA

USER MANUAL

CLDMFGMS01

CLDMFGBS02

CLDMFGSH03

CLDMFGHS04

NEED HELP? CONTACT US!

www.vevor.com/support

STEP 9

PRODUCT PARAMETERS

Modell	Färg	Antal Paneler	Produktstorlek
CLDMFGMS01	Gräddvit	1	3085*450*2455mm
CLDMFGBS02	Brunhet
CLDMFGSH03	Grå
CLDMFGHS04	Svart

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support