Insane² - Scooter Fun Pro - Free user manual and instructions
Find the device manual for free Insane² Fun Pro in PDF.
User questions about Insane² Fun Pro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Scooter in PDF format for free! Find your manual Insane² - Fun Pro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Insane² by Fun Pro.
USER MANUAL Insane² Fun Pro
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom
SICHERHEITSHINWEISE
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

CONTENTS
Safety Instructions 8
Correct Driving and Braking Technique 8
Assembling 9
First Road Tests 10
Maintenance and Care 10
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom
SAFETY INSTRUCTIONS
In our experience, a few safety precautions are recommended in order to have fun with a fun pro scooter for as long and healthy a time as possible:
- This scooter is approved for a maximum total load of 100 KG.
- Wear personal protective equipment! (At least hand / wrist protection, knee protection, head protection and elbow protection)
Please note:
- That the user or legal guardian has to check the restriction of the area of use by the road traffic regulations.
- The recommendation or description of suitable surfaces for use (smooth, clean, dry and as free as possible from other road users).
- That at least the following protective equipment shall be used: Hand/wrist protection, knee protection, head protection and elbow protection.
- That the steering is correctly adjusted and that all connecting parts are tightened and not defective.
- The description of the correct driving and braking technique.
- How to operate the Kick-Scooter in such a way as to avoid falling or getting caught.
- That shoes should always be worn.
- That the scooter is not to be driven in the dark.
- That the braking device becomes hot during continuous use and cannot be touched after braking.
CORRECT DRIVING AND BRAKING TECHNIQUE
- Drive only so fast that you can always brake safely.
- Only use the scooter for driving on level surfaces.
- Keep both hands on the handlebars in the designated places.
- Place the foot on the board and use the other foot to give momentum.
- Use the foot with which you give momentum to use the brake.
- To brake, press the brake down onto the rear wheel with the flywheel. The harder you press, the more you brake.
ASSEMBLY
The Insane2 by fun pro has a HIC compression system. First of all, make yourself familiar with the components.

Test that all components are correctly connected. To do this, take the scooter by the handle ends and by the deck and shake each one. Nothing should move on the handlebars.
After assembly, start with slow and careful test rides and retighten the screws of (d) slightly after a few minutes.
FIRST ROAD TESTS
- Practice on a closed area where you do not endanger anyone and you are not endangered yourself.
- For a child: First driving attempts only when accompanied by an adult.
- Accompany the test rides until you are sure that the child can handle the scooter safely.
Artistics
A scooter is often also used for artistic purposes. We try to prepare our scooters for this use in the best possible way. However, we have to point out, that artistic activities like jumps or riding a half pipe leave the area of the usual product warranty and take place at your own risk.
MAINTENANCE AND CARE
- Only use the scooter in dry weather.
- Do not leave the scooter in the open after use.
- Check the tightness of all screw connections regularly.
Estimado cliente,
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom
Chere cliente, cher client,
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom
INSTRUCTIONS DE SECURITE
PRODUTTORE IMPORTATORE (UK)
Produxtore:
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germania.
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom