9526 - Workshop vise Vevor - Free user manual and instructions

USER MANUAL 9526 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS. HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

We continue to be committed to provide you tools with

competitive price.

"Save Half", "Half Price" or any other similar expressions used

by us only represents an estimate of savings you might benefit

from buying certain tools with us compared to the major top

ands and does not necessarily mean to cover all categories

of tools offered by us. You are kindly reminded to verify

carefully when you are placing an order with us if you are

actually saving half in comparison with the top major brands.

Bench Vice

Operating Instruction

6inch Mechanic Bench Vise

Model: 9526

VEVOR

Bench Vice

Model: 9526

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

01 02 03 04

SPECIFICATIONS
Model:	9526
Designation:	6inch Mechanic Bench Vise
Material:	Ductile Iron
Overallsize:	365*151*189mm
Baking width:	151mm
Maximum opening:	150mm
Maximum clamping force:	20KN
Color:	Grey+Orange
Weight:	About 12.55kg

DESCRIPTION

Solid Ductile iron

Rotation table 360° rotation

Suitable for installation on the table.

PACKAGE

1 x Bench Vise Table Top Clamp Press

1 x User Manual

4×Nuts

4 x Screws

1 x Base mount paperboard

1 x Mat nylon clamp mouth pad

APPLICATION

Bench vice is used to clamp workpieces. It is installed on the work stations to clamp the workpieces. It is an necessary tool in the schlosserei. Rotating disc type clamp body can revolve so that make the workpiece rotate to the suitable place. Most work of fitter are finished on the bench vice. For example, the saw, the file, the chisel and components in stalling and dismantling.

INSTALLATION

Install the pliers on the clamp table

1. Operating Instruction

The height of operator working will be suitable because the bench vice is installed on the work bench. Usually the jaw height is flushed with elbow just right. This is ok. Put the elbow on the bench vice peak and half clenched fists that the fist just support the mandible. Length and width of work bench will be decided by the work.

1. Cautions

(1) Appropriate degree of tightness when clamp the workpiece. Just tight the hand shank by the hand only. Do not add strength with the help of other tools. No clamp-holding force shall be exceeded.

(2) When work strongly, you need try your best to make strength facing to clamp body.

(3) Do not knocking on the clamp body and smooth surface. (4) Clean and lubricate the surface of lead screw and nut so that it will not rust.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi,baoshanqu,shanghai 200000 CN.

Imported to AUS: SIHAD PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC REP

E-CrossStu GmbH

Mainzer Landstr.69

60329 Frankfurt am Main.

YH CONSULTING LIMITED

UK REP

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Madre created by

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS. HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

Have product questions? Need technical support?

Nheeler pass a virus collector

Technical Support and E-Warranty Certificate

www.vevor.com/support

Table current to 300

jaw height is flushed with elbow just right. This is ok

Put the elbow on the bench vice peak, and half clenched fists that the fist just support the possible length and width of

that the list just support the Manitoba, Longor and Wharf of Work

When work strongly, you need try your best to make

3 Do not knocking on the clamp body and smooth surface.

4 Clean and lubricate the surface of lead screw and

Importe on Australia: SHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW

2122 Australia

AIS YH Consulting Limited Bureau 147.

Cemberton House, London Road, Stalnes-

upon-Thomas, Surrey, TW15 40X

co

14

Madre created by

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS. HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

Have product questions? Need technical support?

Technical Support and E-Warranty Certificate

www.vevor.com/support

stations to clamp the workpieces. It is an necessary tool in the

the workpiece rotate to the suitable place. Most work of fitter are fini-

shed on the bench vice. For example, the saw, the file, the chisel

jaw height is flushed with elbow just right. This is ok

Put the elbow on the bench vice peak, and half clenched fists that the fist just support the possible length and width of

When work strongly, you need try your best to make

Do not knocking on the clamp body and smooth surface.

(4) Clean and lubricate the surface of lead screw and

CIO YH Consulting Limited Office 147 Centuror

Haus, Lechee, Paul, Simon-ozvo

James, 5.000. WIS 4AX

03

04

Madre created by

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS. HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

Have product questions? Need technical support?

Technical Support and E-Warranty Certificate

www.vevor.com/support

jaw height is flushed with elbow just right. This is ok

Put the elbow on the bench vice peak and half clenched fists

that the list just support the mandible. Length and width of work

1. P# of the data should be available.

2: When work strongly, you need try your best to make

sebleza tárls, ##o i ##o de mevalo

[3] Do not knocking on the clamp body and smooth surface.

(4) Clean and lubricate the surface of lead screw and

data in mode the non arrangements.

Freduzere: Shanghai, Shenzhen, Guangdong

Inizio: Shuangchonglu 900nong11hao16024 1609en, poeshanju, changhai

20000 CN

Impulse in AUS: SHAD PTY LTD. 1 POKEVA STREETEASTWOOD NSW

2122 Australia

I=porise negi USA: Server Technology Ltd. Sale 250, 8166 Araneim Place,

Rancha Cucamonga, CA 91730

E-QuasiSt. GmbH

Measures (and/or 80)

GO VII Consulting Limited, Office 147.

Conlunion House, London Road,

Staines Upon Thems, Surrey. TW18 4AX

C8

14

Madre created by

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

Machay, coindled by Vang:

VEVOR

Tomillo de banco

Model: 9526

Have product questions? Need technical support?

B) due [1] (2015) on (2012) (or 3) solve

Technical Support and E-Warranty Certificate

www.vevor.com/support

E. limit the number of other one square for place of jujks. So that is on a place of jujks, stations to clamp the workpieces. It is an necessary tool in the

Accruedes de dos plazos. Il corte da la ablation for dos grows plazo que se ramos que the workpiece rotate to the suitable place. Most work of fitter are finished on the bench vice. For example, the saw, the file, the chisel

jaw height is flushed with elbow just right. This is ok

Put the elbow on the bench vice peak, and half clenched fists

that the list just support the mandible. Length and width of work

When work strongly, you need try your best to make

(3) Do not knocking on the clamp body and smooth surface.

(4) Clean and lubricate the surface of lead screw and

Fabricante. Shanghai, 2014, you are going

Direclic Shuangchenglu 839-301-502A-1606Shuboshangu, shangxi 20000 CN.

Importado a AUS: SIRAO PTY LTD 1 ROKEVA STREETEASTWOOD MSN 2122 A. M. M.

Imported a = UU Sanown Technology Ltd. Suite 250, R186 Anheim Plaza, Rancho Cucamonga, CA 91730

EC REP E-CloseStar GmbH Manufacturer: Lerner 20, 01028 Largest tel. News

UK REP YH CONSULTING UNITADA, CIO YH Consulting Limited Oficina 147, Cenurion House, London Road, Stinhscaper- Thames, Surrey, TAVIS 40X

12

[14]

Madre created by

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS. HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

Have product questions? Need technical support?

Technical Support and E-Warranty Certificate

www.vevor.com/support

The workpiece is a key for the workpiece, but it is necessary to decrease the workpiece stations to clamp the workpieces. It is an necessary tool in the piecesore. Obrotowy karpus zdraku tyu tawczewoc mote st; obrotary, dred czemu the workpiece rotate to the suitable place. Most work of fitter are finished on the bench vice. For example, the saw, the file, the chisel i podzecbelow pockas postoj i demonate.

INSTALACJA

Jaw Height is hushed with elbow just right. This is ok. Put the elbow on the bench vice neck and half clenched fists.

that the list just support the mandible. Length and width of work

that the not just supports the manufacturers. Longen and Moth of Weir liver samples used no substrate way:

1. Погревица

When work strongly, you need try your best to make

(3) Do not knocking on the clamp body and smooth surface.

(4) Clean and lubricate the surface of lead screw and

Importance on AUS: SIHAO PTY LTD. 1 ROKFVA STREETFASTWOOD NSW 2122 Australia

Importance in USA Screen Technology Ltd. Scale 250, 0165 Anaheim Place Rando Cutserongs, CA 01730

L-CrossStu GmbH

EC REP Mainer Landsat 6)

9.523

UK PDR

UK REP D.C. TH LANKING TIME: SANS 10, CHINEEN

10.02. (min.) 0.41. (min.)

frames, 50rey, 10718 4ex

C3

M

Madre created by

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS. HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

HELP BOOK? NEEM CONTACT MET ONS OP!

Have product questions? Need technical support?

Technical Support and E-Warranty Certificate

www.vevor.com/support

Bancachwal word keyboard on workers tool to kitchen. It is not up the works, therefore stations to clamp the workpieces. It is an necessary tool in the

slotted. Preference script type key between key dimensions social motion the workpiece rotate to the suitable place. Most work of fitter are finished on the bench vice. For example, the saw, the file, the chisel on component by stating on demontage.

INSTALLATION

jaw height is flushed with elbow just right. This is ok

Put the elbow on the bench vice peak, and half-clenched fists.

that the list just support the Manitoba, Long'an and Wharf of Work.

2018.07.1

overexchiven:Work strongly, you need try your best to make

[3] Do not knocking on the clamp body and smooth surface.

[4] Clean and lubricate the surface of lead screw and

C&D YH Consulting Limited Kencor 147.

Centurion House, London Floor,

Slams upon-Thems, Survey, TW10 4AX

ca

M

Madre created by

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS. HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

Machay, coindled by Vang:

VEVOR

Bänk Vice

Modell: 9526

BEHÖVER HJÄLP? KONTAKTA OSSI

Have product questions? Need technical support? Korakia, oss. nama:

Technical Support and E-Warranty Certificate

www.vevor.com/support

Barnakmazipice samples for all Marmas hot water electrolytes. Can be installed on various stations to clamp the workpieces. It is an necessary tool in the

schlosserei. Hluzerande svutyp klernkupp kan roters sa. all gives the workpiece rotate to the suitable place. Most work of fitter are finished on the bench vice. For example, the saw, the file, the chisel and korponenbe vid stafning and demnöberg.

INSTALLATION

jaw height is flushed with elbow just right. This is ok

Put the elbow on the bench vice peak, and half-clenched fists.

that the list just support the Manitoba, Longton and Wharf of Work

1. Vambear

When work strongly, you need try your best to make

Ray Do not knocking on the clamp body and smooth surface.

§49 Clean and lubricate the surface of lead screw and

malle si all der rés rode

Tilbarken: Shanghaiminxayou.xiangangai

Address: Shuangchenglu 806nong11hsol602A 1509shi.baoshanqu, shangxi 200000 CN.

Imported till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122. Australia

Imported it USA. Sarwan Technology Ltd. Suite 250, 9166 Anaheim Plaza, Rancho Cucamongo, CA 91730

E-038850 18-6H

Mainzar Landstr 65.

YH CONSULTING LIMITED

C/O YH Consulting Limited Office 147

Centurlan House, London Road,

Stairs-upor-Thomas, Survey, TW:84X

ce

04