CXFC06J-4 - Jack Vevor - Free user manual and instructions

Brand	Vevor
Model	CXFC06J-4
Product Type	RV Leveling Jack Support
Pad Quantity	4 pieces
Support Height	35 mm (1.38 inch)
Maximum Load per Pad	2268 kg (5000 lb)
Material	Heavy-duty Steel
Main Functions	Leveling and stabilization of recreational vehicles (RV)
Usage	Use with camper trailer jack
Included Parts	4 pads, 8 M10x75 hex bolts, 8 M8x75 hex bolts, 8 M10 nylon nuts, 8 M8 nylon nuts, 16 step pads, 1 manual
Maintenance and Cleaning	Keep clean, dry, and stored away from moisture; do not use abrasive products
Safety	Read the instructions carefully before use; wear PPE (gloves, goggles); do not use near flames; check stability before each use
Repairability	Spare parts available (bolts, nuts, step pads); technical support via www.vevor.com/support
General Information	Designed for strength and quality; competitive price compared to major brands
Warranty	Electronic warranty certificate available online

Frequently Asked Questions - CXFC06J-4 Vevor

What is the maximum weight supported by this jack support?

Each pad can support up to 5000 lb (2268 kg). For the 4 pads, the total recommended load should not exceed this capacity per support point.

Are these supports compatible with all RVs?

They are designed for camper trailer jacks. Check that the height (35 mm) and attachment system match your vehicle.

How to install the leveling pads?

Use the M10 and M8 hex bolts provided with the nylon nuts. Ensure the pad is securely fixed and stable before lifting the RV.

Can I use these supports on soft or uneven ground?

It is recommended to place the pads on a flat, dry, and hard surface. Avoid loose or sloping ground to ensure stability.

How to maintain the jack supports?

Clean them with a dry cloth after each use. Store them in a dry place away from moisture to prevent corrosion. Regularly check the condition of bolts and nuts.

Are these supports delivered with assembly instructions?

Yes, the user manual is included. It details the parts list, safety instructions, and installation steps.

What protective equipment should I wear during installation?

Wear safety goggles and gloves to avoid injuries. Ensure the workspace is clean, dry, and well-ventilated.

What if a bolt or nut is lost?

You can order spare parts by contacting technical support via www.vevor.com/support. Bolts are M10 and M8 standard.

Are these supports suitable for stabilizing a mobile home?

Yes, they are specifically designed for leveling and stabilization of recreational vehicles. Respect the maximum load capacity per pad.

Where to find the warranty certificate?

The electronic warranty certificate is available online at www.vevor.com/support. Keep your proof of purchase.

USER MANUAL CXFC06J-4 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RV LEVELING JACK PAD

MODEL: CXFC06J-4

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL: CXFC06J-4

Technical line drawing of a hexagonal mechanical bracket with two mounting flanges and four bolts (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

WARNING

• Please read this manual carefully before using the product.
• Keep away from sharp points, blades and other items, so as not to scratch the product.
  ● Use the product only after receiving professional training.
• Wear necessary personal protective equipment such as safety goggles, and protective gloves during use.
• Ensure that the workspace remains clean, dry, and well-ventilated during operation.
• Keep away from open flame. This product will ignite and burn if brought into contact with an open flame. Do not use the jack pad in flammable, explosive, or damp environments.
• Ensure that the jack pad is securely installed and stable to prevent movement or tipping during use.
• Follow safe operating procedures when using the jack pad, avoiding excessive force or incorrect techniques.
  ● Fix it first when using it. so as not to be injured.
• This product is not a toy, keep away from children and cannot be used as toys for children to play with

Suitable for camping trailer jacks, each pad bearing up to 5,000 pounds. Designed specifically for the strength and quality.

PRODUCT CONFIGURATION

Model	CXFC06J-4
Quantity (pcs)	4
Support Height (inch / mm)	1.38 / 35
Single Max. Load (lbs / kg)	5000 / 2268

PARTS LIST

ITEM	Name	Picture	Q'TY
1	JACK PAD		4PCS
2	M10x75 Hexagon bolt		8PCS
3	M8x75 Hexagon bolt		8PCS
4	M10 nylon nut		8PCS
5	M8 nylon nut		8PCS
6	Equipped with step pad		16PCS
7	manual		1PCS

PRODUCT INTRODUCTION

USE INDICATION

Technical line drawing of a mechanical clamp or bracket assembly with bolts and a bolt head (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Close-up of a black aircraft landing gear with attached yellow warning label, mounted on a concrete ground surface (no text or symbols visible)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a hexagonal mechanical bracket with two mounting holes and four bolts (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

CONFIGURATION DU PRODUIT

Technical line drawing of a mechanical clamp or bracket assembly with bolts and a base plate (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Close-up of a black aircraft landing gear with attached yellow warning label, mounted on a concrete ground surface (no text or symbols visible)

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australie

A/S YH Consulting Limited Bureau 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

Technical line drawing of a hexagonal mechanical bracket with two mounting holes and four bolts (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly with bolts and a base plate (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Close-up of a black aircraft landing gear with attached yellow warning label, mounted on a concrete ground surface (no text or symbols visible)

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Nach AUS importiert: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a hexagonal mechanical bracket with two mounting holes and four bolts (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly with bolts and a central rod (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Close-up of a black aircraft landing gear with attached yellow warning label, mounted on a concrete ground surface (no text or symbols visible)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

CONSULENZA YH LIMITATA.

C/O YH Consulting Limited Ufficio 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a hexagonal mechanical bracket with two mounting flanges and four bolts (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly with bolts and a central rod (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Close-up of a black aircraft landing gear with attached yellow warning label, mounted on a concrete ground surface (no text or symbols visible)

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

Technical line drawing of a hexagonal mechanical bracket with two mounting holes and four bolts (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Technical line drawing of a mechanical clamp or bracket assembly with bolts and a central rod (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Close-up of a black aircraft landing gear with attached yellow warning label, mounted on a concrete ground surface (no text or symbols visible)

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Szanghaj 200000 CN.

Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Biuro 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a hexagonal mechanical bracket with two mounting holes and four bolts (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Technical line drawing of a mechanical clamp or bracket assembly with bolts and a central rod (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Close-up of a black aircraft landing gear with attached yellow warning label, mounted on a concrete ground surface (no text or symbols visible)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

RV-NIVELLATIEKRIKPAD

MODEL: CXFC06J-4

Technical line drawing of a hexagonal mechanical bracket with two mounting holes and four bolts (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Technical line drawing of a mechanical clamp or bracket assembly with bolts and a base plate (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Close-up of a black aircraft landing gear with attached yellow warning label, mounted on a concrete ground surface (no text or symbols visible)

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Sanghai 200.000 CN.

C/O YH Consulting Limited Kantoor 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support