YC0003 - Clothes racks Vevor - Free user manual and instructions

USER MANUAL YC0003 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

GARMENT RACKS

USER MANUAL

MODEL: YC0003

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

GARMENT RACKS

MODEL:YC0003

Technical line drawing of a multi-level metal shelving unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

[e-mail]

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Garment Racks.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Do not exceed weight capacities.
4. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Garment Racks.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.

SAVE THIS MANUAL

1. mesh X8	2.1 upper pipe X4
2.2 upper pipe X4	3. middle pope X8
4. lower pipe X8	5. hanging pipe X4
6. pothook X2	7. metal-sheet pothook X8
8.clamping piece X74	9. screw X8
10.spanner X1	11.ribbon weaving X1
12. expand nails X1	13. screw X1

STEP 1

Technical diagram showing a cylindrical mechanical component with labeled parts and assembly instructions

Component 1

Illustration of multiple parallel cylindrical objects arranged in a row (no text or symbols)

x8

8

x16

STEP 2

EP 2 1

Technical line drawing of a mechanical assembly with no visible text or symbols

Pure technical line drawing of a mechanical assembly without any text, numbers, or symbols

√

Pure mechanical diagram showing two crossed pipes and a rectangular block (no text or symbols)

X
Component 2

Wire mesh structure with four vertical posts and a base platform (no text or symbols)

Isometric line drawing of a grid structure with vertical supports (no text or symbols)

x 2

STEP 3

Technical line drawing of a multi-tiered grid structure with numbered components (no text or symbols)

Component 3

Technical line drawing of a structural framework with vertical supports and rectangular bases (no text or symbols)

8

x8

STEP 4

Technical line drawing of a multi-tiered structural framework with vertical supports and labeled components (no text or symbols present)

Component 4

Structural diagram of two stacked metal shelving units with vertical supports (no text or symbols)

8

x8

STEP 5

3D wireframe diagram of a multi-tiered scientific apparatus with vertical rods and base platforms, no text or symbols present.

Component 5

Structural diagram of a multi-level steel shelving unit with vertical supports (no text or labels)

STEP 6

Technical diagram of a multi-tiered structural framework with labeled components and measurement indicators

Component 6

8 x8

STEP 7

Technical diagram of a multi-tiered structural framework with labeled components 1, 6, and 8

Component 7

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

8

x8

STEP 8

2.2 2.1

Component 8

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

STEP 9

Technical diagram of a multi-tiered storage or rack system with labeled components and structural elements

Component 9

Technical line drawing of two stacked metal shelving units with vertical ladder structures (no text or symbols)

8

x8

STEP 10

Technical line drawing of a multi-tiered storage or rack system with numbered components (no text or symbols)

Component 10

Isometric line drawing of a multi-level metal shelving unit (no text or symbols)

8

x16

STEP 11

Technical line drawing of a multi-level metal shelving unit with vertical supports and horizontal shelves (no text or symbols)

Component 11

Technical line drawing of a multi-level metal shelving unit (no text or symbols)

9

x8

STEP 12

φ6mm 1 1 1 2 Fix on the wall

11		x1
12		x1
13		x1

36.6kg,

Even Distribution

20kg/each side Even Distribution

20kg/ct Even Di

36.6kg, Even Distribution

PRODUCT PARAMETER

Model	YC0003
Safe Loading Weight	300 kg
Product Size	1740*450*1800 mm

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEAST-WOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Made In China

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

CONSIGNES DE SÉCURITÉ

AVERTISSEMENT :

Technical line drawing of a grid-based mechanical assembly with multiple parallel rods and a central rod (no text or symbols)

Pure technical line drawing of a mechanical assembly without any text, numbers, or symbols

Pure mechanical assembly diagram showing two views labeled X and ✓, without any text or symbols beyond the labels.

Component 2 X2

ÉTAPE 3

Technical line drawing of a multi-tiered grid structure with vertical supports and numbered components (no text or symbols)

Composante 3

Technical line drawing of a structural framework with vertical supports and horizontal beams (no text or symbols)

8

x8

ÉTAPE 4

Technical diagram of a multi-tiered structural framework with labeled components 1 and 8

Composante 4

3D wireframe diagram of a multi-tiered storage or rack structure with vertical supports (no text or symbols)

8

x8

ÉTAPE 5

3D wireframe diagram of a multi-tiered scientific apparatus with vertical rods and a labeled component (no text or symbols present)

Component 5

Structural diagram of a multi-level metal shelving unit with vertical supports (no text or symbols)

ÉTAPE 6

Technical diagram of a multi-tiered storage or rack system with labeled components 1 and 8

3D wireframe diagram of a multi-tiered storage unit structure, labeled 'Composante 6' (no other text or symbols)

8

x8

ÉTAPE 7

Technical diagram of a multi-tiered storage or rack system with numbered components, likely for engineering or manufacturing documentation.

Composante 7

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

8

x8

ÉTAPE 8

2.2 2.1

Composante 8

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

ÉTAPE 9

Technical diagram of a multi-tiered storage or rack system with labeled components 1 and 8, showing structural layers and vertical supports.

Component 9

Technical line drawing of two stacked metal shelving units with vertical supports (no text or symbols)

8

x8

ÉTAPE 10

Technical diagram of a multi-level storage or rack system with labeled components 1 and 8

Composante 10

Isometric line drawing of a multi-level metal shelving unit (no text or symbols)

8

x16

ÉTAPE 11

Technical line drawing of a multi-level metal shelving unit with vertical supports and horizontal shelves (no text or symbols)

Component 11

Technical line drawing of a multi-level metal shelving unit (no text or symbols)

9

x8

ÉTAPE 12

φ6mm 1 1 1 2 1 3 Fix on the wall

11 5^ x1
	x1
13,	x1

36,6 kg,

20 Kg/ch Répartitici

C/O YH Consulting Limited Bureau 147, Centurion House,

Route de Londres, Staines-upon-Thames, Surrey, TW18 4AX

Fabriqué en Chine

SICHERHEITSHINWEISE

ACHTUNG:

Technical line drawing of a grid-based mechanical assembly with multiple parallel rods and a central rod (no text or symbols)

Pure architectural line drawing of a structural framework without any text, numbers, or symbols

Pure mechanical assembly diagrams without any text, numbers, or symbols

Component 2 X2

SCHRITT 3

Technical line drawing of a multi-tiered grid structure with vertical supports and numbered components (no text or symbols)

Komponente 3

Technical line drawing of a structural framework with vertical supports and rectangular bases (no text or symbols)

8

x8

SCHRITT 4

Technical diagram of a multi-tiered structural framework with labeled components and measurement indicators

Komponente 4

3D wireframe diagram of a multi-tiered storage or rack structure with vertical supports (no text or symbols)

8

x8

SCHRITT 5

3D wireframe diagram of a multi-tiered scientific apparatus with vertical rods and a labeled component (no text or symbols present)

Component 5

Structural diagram of a multi-level steel shelving unit with vertical supports (no text or labels)

SCHRITT 6

Technical diagram of a multi-tiered storage or rack system with labeled components and measurement indicators

Komponente 6

8

x8

SCHRITT 7

Technical diagram of a multi-tiered storage or rack system with numbered components, likely for engineering or manufacturing documentation.

Komponente 7

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

8

x8

SCHRITT 8

2.2 2.1

Komponente 8

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

SCHRITT 9

Component 9 1 8

Component 9

Technical line drawing of two stacked metal shelving units with vertical supports (no text or symbols)

8

x8

SCHRITT 10

Technical diagram of a multi-level storage or rack system with labeled components 1 and 8

Komponente 10

Isometric line drawing of a multi-level metal shelving unit (no text or symbols)

8

x16

SCHRITT 11

Technical line drawing of a multi-tiered modular shelving unit (no text or symbols)

Component 11

Technical line drawing of a multi-level metal shelving unit (no text or symbols)

9

x8

SCHRITT 12

φ6mm 1 1 1 2 1 3 Fix on the wall

11 5^ x1
	x1
13,	x1

36,6 kg,

Rancho Cucamonga, CA91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

Technical line drawing of a grid-based structure with multiple parallel rods and a central rod, no text or symbols present.

Pure architectural line drawing of a structural framework without any text, numbers, or symbols

Pure mechanical assembly diagrams without any text, numbers, or symbols

Component 2 X2

PASSO 3

Technical line drawing of a multi-tiered grid structure with vertical supports and numbered components (no text or symbols)

Componente 3

Technical line drawing of a structural framework with vertical supports and rectangular bases (no text or symbols)

8

x8

PASSO 4

Technical line drawing of a multi-tiered structural framework with vertical supports and labeled components (no text or symbols present)

Componente 4

3D wireframe diagram of a multi-tiered storage or rack structure with vertical supports (no text or symbols)

8

x8

PASSO 5

3D wireframe diagram of a multi-tiered scientific apparatus with vertical rods and a labeled component (no text or symbols present)

Component 5

Structural diagram of a multi-level metal shelving unit with vertical supports (no text or labels)

PASSO 6

Technical diagram of a multi-tiered storage or rack system with labeled components and measurement indicators

Isometric view of a multi-tiered metal shelving unit with vertical posts and horizontal shelves (no text or symbols)

8

x8

PASSO 7

Technical diagram of a multi-tiered storage or rack system with numbered components, likely for engineering or manufacturing documentation.

Componente 7

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

8

x8

PASSO 8

2.2 2.1

Componente 8

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

PASSO 9

Technical diagram of a multi-tiered storage or rack system with labeled components 1 and 8, showing structural layers and vertical supports.

Component 9

Technical line drawing of two stacked metal shelving units with vertical supports (no text or symbols)

8

x8

PASSO 10

Technical diagram of a multi-level storage or rack system with labeled components 1 and 8

Componente 10

Isometric line drawing of a multi-level metal shelving unit (no text or symbols)

8

x16

PASSO 11

Technical line drawing of a multi-level metal shelving unit with vertical supports and horizontal shelves (no text or symbols)

Component 11

Technical line drawing of a multi-level metal shelving unit (no text or symbols)

9

x8

PASSO 12

φ6mm 1 1 1 2 1 3 Fix on the wall

115^x1
	x1
13,	x1

36,6 kg,

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEAST-WOOD NSW 2122 Australia

Importato negli USA: San ven Technology Ltd. Suite 250, 9166 Ana-heim Place, Rancho Cucamonga, CA91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Francoforte sul Meno.

CONSULENZA YH LIMITATA.

C/O YH Consulting Limited Ufficio 147, Centurion House, Via Roma, 101, 00186 Roma, Italia

Made in China

Technical line drawing of a grid-based mechanical assembly with multiple parallel rods and a central rod (no text or symbols)

Pure technical line drawing of a mechanical assembly without any text, numbers, or symbols

Pure mechanical assembly diagram showing two views labeled X and ✓, without any text or symbols beyond the labels.

Component 2 X2

PASO 3

Technical line drawing of a multi-tiered grid structure with vertical supports and numbered components (no text or symbols)

Componente 3

Technical line drawing of a structural framework with vertical supports and rectangular bases (no text or symbols)

8

x8

PASO 4

Technical line drawing of a multi-tiered structural framework with vertical supports and labeled components (no text or symbols present)

Componente 4

3D wireframe diagram of a multi-tiered storage or rack structure with vertical supports (no text or symbols)

8

x8

PASO 5

3D wireframe diagram of a multi-tiered scientific apparatus with vertical rods and a labeled component (no text or symbols present)

Component 5

Structural diagram of a multi-level steel shelving unit with vertical supports (no text or labels)

PASO 6

Technical diagram of a multi-tiered storage or rack system with labeled components and measurement indicators

Componente 6

8 x8

PASO 7

Technical diagram of a multi-tiered structural framework with numbered components, likely for architectural or engineering design reference.

Componente 7

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

8

x8

PASO 8

2.2 2.1

Componente 8

Technical line drawing of a multi-level shelving unit with vertical metal racks (no text or symbols)

PASO 9

Technical diagram of a multi-tiered storage or rack system with labeled components 1 and 8, showing structural layers and vertical supports.

Component 9

Technical line drawing of two stacked metal shelving units with vertical supports (no text or symbols)

8

x8

PASO 10

Technical diagram of a multi-level storage or rack system with labeled components 1 and 8

Componente 10

Isometric line drawing of a multi-level metal shelving unit (no text or symbols)

8

x16

PASO 11

Technical line drawing of a multi-level metal shelving unit with vertical supports and horizontal shelves (no text or symbols)

Component 11

Technical line drawing of a multi-level metal shelving unit (no text or symbols)

9

x8

PASO 12

φ6mm 1 1 1 2 1 3 Fix on the wall

11 5^ x1
12 confesion	x1
13,	x1

36,6 kilograms,

C/O YH Consulting Limited Oficina 147, Centurion House,

Carretera de Londres, Staines-upon-Thames, Surrey, TW18 4AX

Hecho en china

INSTRUKCJE BEZPIECZEŃSTWA

OSTRZEŻENIE:

Technical line drawing of a multi-tiered grid structure with vertical supports and numbered components (no text or symbols)

Komponent 3

Technical line drawing of a structural framework with vertical supports and rectangular bases (no text or symbols)

8

x8

KROK 4

Technical line drawing of a multi-tiered structural framework with vertical supports and labeled components (no text or symbols present)

Komponent 4

3D wireframe diagram of a multi-tiered storage or rack structure with vertical supports (no text or symbols)

8

x8

KROK 5

3D wireframe diagram of a multi-tiered scientific apparatus with vertical rods and a labeled component (no text or symbols present)

Component 5

Structural diagram of a multi-level metal shelving unit with vertical supports (no text or symbols)

KROK 6

Technical diagram of a multi-tiered storage or rack system with labeled components and measurement indicators

Komponent 6

8

x8

KROK 7

Technical diagram of a multi-tiered structural framework with numbered components, likely for architectural or engineering design.

Komponent 7

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

8

x8

KROK 8

/2.2 2.1

Komponent 8

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

KROK 9

Component 9 1 8

Component 9

Technical line drawing of two stacked metal shelving units with vertical supports (no text or symbols)

8

x8

KROK 10

Technical diagram of a multi-level storage or rack system with labeled components 1 and 8

Komponent 10

Isometric line drawing of a multi-level metal shelving unit (no text or symbols)

8

x16

KROK 11

Technical line drawing of a multi-level metal shelving unit with vertical supports and horizontal shelves (no text or symbols)

Component 11

Technical line drawing of a multi-level metal shelving unit (no text or symbols)

9

x8

KROK 12

φ6mm 1 1 1 2 1 3 Fix on the wall

C/O YH Consulting Limited Biuro 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

Technical line drawing of a grid-based mechanical assembly with multiple parallel rods and a central rod (no text or symbols)

Pure architectural line drawing of a structural framework without any text, numbers, or symbols

Pure mechanical assembly diagrams without any text, numbers, or symbols

Component 2 X2

STAP 3

Technical line drawing of a multi-tiered grid structure with vertical supports and numbered components (no text or symbols)

Onderdeel 3

Technical line drawing of a structural framework with vertical supports and rectangular bases (no text or symbols)

8

x8

STAP 4

Technical line drawing of a multi-tiered structural framework with vertical supports and labeled components (no text or symbols present)

Onderdeel 4

3D wireframe diagram of a multi-tiered storage or rack structure with vertical supports (no text or symbols)

8

x8

STAP 5

3D wireframe diagram of a multi-tiered scientific apparatus with vertical rods and a labeled component (no text or symbols present)

Component 5

Structural diagram of a multi-level metal shelving unit with vertical supports (no text or symbols)

STAP 6

Technical diagram of a multi-tiered storage or rack system with labeled components and measurement indicators

3D wireframe diagram of a multi-tiered storage unit structure with vertical supports (no text or symbols)

8

x8

STAP 7

Technical diagram of a multi-tiered storage or rack system with numbered components, likely for engineering or manufacturing documentation.

Onderdeel 7

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

8

x8

STAP 8

/2.2 2.1

Onderdeel 8

Technical line drawing of a multi-level shelving unit with vertical metal racks (no text or symbols)

STAP 9

Technical diagram of a multi-tiered storage or rack system with labeled components 1 and 8, showing structural layers and vertical supports.

Component 9

Technical line drawing of two stacked metal shelving units with vertical supports (no text or symbols)

8

x8

STAP 10

Technical diagram of a multi-level storage or rack system with labeled components 1 and 8

Onderdeel 10

Isometric line drawing of a multi-level metal shelving unit (no text or symbols)

8

x16

STAP 11

Technical line drawing of a multi-level metal shelving unit with vertical supports and horizontal shelves (no text or symbols)

Component 11

Technical line drawing of a multi-level metal shelving unit (no text or symbols)

9

x8

STAP 12

φ6mm 1 1 1 2 1 3 Fix on the wall

11 5^ x1
	x1
	x1

36,6 kg,

C/O YH Consulting Limited Kantoor 147, Centurion House,

Londen Road, Staines-upon-Thames, Surrey, TW18 4AX

Gemaakt in China

SÄKERHETSINSTRUKTIONER

WARNING:

Technical line drawing of a grid-based structure with multiple parallel rods and a central rod, no text or symbols present.

Pure architectural line drawing of a structural framework without any text, numbers, or symbols

Pure mechanical assembly diagrams without any text, numbers, or symbols

Component 2 X2

STEG 3

Technical line drawing of a multi-tiered grid structure with vertical supports and numbered components (no text or symbols)

Komponent 3

Technical line drawing of a structural framework with vertical supports and rectangular bases (no text or symbols)

8

x8

STEG 4

Technical line drawing of a multi-tiered structural framework with vertical supports and labeled components (no text or symbols present)

Komponent 4

3D wireframe diagram of a multi-tiered storage or rack structure with vertical supports (no text or symbols)

8

x8

STEG 5

3D wireframe diagram of a multi-tiered scientific apparatus with vertical rods and a labeled component (no text or symbols present)

Component 5

Structural diagram of a multi-level steel shelving unit with vertical supports (no text or labels)

STEG 6

Technical diagram of a multi-tiered storage or rack system with labeled components and measurement indicators

Komponent 6

8

x8

STEG 7

Technical diagram of a multi-tiered storage or rack system with numbered components, likely for engineering or manufacturing documentation.

Komponent 7

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

8

x8

STEG 8

2.2 2.1

Komponent 8

Technical line drawing of stacked metal shelving units with vertical supports (no text or symbols)

STEG 9

Technical diagram of a multi-tiered storage or rack system with labeled components 1 and 8, showing structural layers and vertical supports.

Component 9

Technical line drawing of two stacked metal shelving units with vertical supports (no text or symbols)

8

x8

STEG 10

Technical diagram of a multi-level storage or rack system with labeled components 1 and 8

Komponent 10

Isometric line drawing of a multi-level metal shelving unit (no text or symbols)

8

x16

STEG 11

Technical line drawing of a multi-level metal shelving unit with vertical supports and horizontal shelves (no text or symbols)

Component 11

Technical line drawing of a multi-level metal shelving unit (no text or symbols)

9

x8

STEG 12

φ6mm 1 1 1 2 1 3 Fix on the wall

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Tillverkad i Kina