YC0002 - Clothes racks Vevor - Free user manual and instructions

USER MANUAL YC0002 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

GARMENT RACKS

USER MANUAL

MODEL:YC0002

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

GARMENT RACKS

MODEL:YC0002

Line drawing of a three-tiered shelving unit with vertical metal racks and wheels (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

[e-mail]

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Garment Racks.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Do not exceed weight capacities.
4. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Garment Racks.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.

SAVE THIS MANUAL

PARTS LIST

Isometric line drawing of a rectangular metal shelving unit (no text or symbols)

1. Mesh x3

Simple line drawing of a diagonal segmented pattern with no text or symbols

1. Upper Pipe x4

Diagram of a cylindrical mechanical component with threaded end and side view, no text or symbols present

1. Lower Pipe x4

Simple line drawing of a cylindrical pipe with a circular end, labeled 'Pipe x2' below (no other text or symbols)

4.Hanging Pipe x2

Simple line drawing of a six-pin rack with two handles (no text or symbols)

1. Pothook x2

1. Metal-Sheet Pothook x4

1. Clamping Piece x34

1. Screw x4

9-1. Brake Wheel x2

9-2. Wheel x2

1. Wrench x1

2. Spanner x1

ASSEMBLY STEP

graph TD
    A["STEP 1"] --> B["Component 1"]
    B --> C["STEP 2"]
    C --> D["Component 2"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

STEP 4

Technical diagram showing a multi-tiered rack-mounted device with labeled parts and directional arrows indicating measurement or positioning.

Line drawing of a metal shelving unit with three vertical supports and wheels (no text or symbols)

Component 4

STEP 5

Technical line drawing of a multi-tiered shelving unit with wheels and metal railings (no text or symbols)

Illustration of two stacked metal shelving units with wheels, no text or symbols present

Component 5

7

x8

STEP 6

5 5 ent 6

Line drawing of a multi-tiered shelving unit with wheels and hanging racks (no text or symbols)

Component 6

7

x8

STEP 7

Technical line drawing of a multi-tiered shelving unit with wheels and hanging hooks (no text or symbols)

Line drawing of a three-tiered shelving unit with wheels and hanging racks (no text or symbols)

Component 7

7

x8

STEP 8

Component 8

Line drawing of a three-tiered shelving unit with wheels and hanging hooks (no text or symbols)

8

x4

COMPLETION

50k 50k

50kg, Even Distribution

Hanging Pipe: 30kg/Each Side, Even Distribution

50kg, Even Distribution

PRODUCT PARAMETER

Model	YC0002
Safe Loading Weight	160 kg
Product Size	1162*450*2040 mm

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEAST-WOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Made In China

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

CONSIGNES DE SÉCURITÉ

AVERTISSEMENT :

Technical diagram showing a multi-tiered rack-mounted device with labeled parts and directional arrows indicating assembly or positioning.

Component 4

Line drawing of a metal shelving unit with three vertical supports and wheels (no text or symbols)

ÉTAPE 5

Technical line drawing of a multi-level metal shelving unit with wheels and a top shelf, no text or symbols present

Two stacked metal shelving units with wheels, no text or symbols visible

Component 5

7

x8

STEP 6

5 5 ent 6

Illustration of a multi-tiered shelving unit with wheels and hanging racks (no text or symbols)

Component 6

7

x8

STEP 7

Technical line drawing of a multi-tiered shelving unit with wheels and hanging hooks (no text or symbols)

Illustration of a three-tiered metal shelving unit with wheels and hanging racks (no text or symbols)

Component 7

7

x8

8

x4

ACHÈVEMENT

50kg, Even Distribution Hanging Pipe: 30kg/Each Side, Even Distribution 50kg, Even Distribution

PARAMÈTRE DU PRODUIT

C/O YH Consulting Limited Bureau 147, Centurion House,

Route de Londres, Staines-upon-Thames, Surrey, TW18 4AX

Fabriqué en Chine

SICHERHEITSHINWEISE

ACHTUNG:

Technical diagram showing a multi-tiered rack-mounted device with labeled parts and directional arrows indicating assembly or positioning.

Component 4

Line drawing of a metal shelving unit with three vertical supports and wheels (no text or symbols)

SCHRITT 5

Technical line drawing of a multi-level metal shelving unit with wheels and a top shelf, no text or symbols present.

Two stacked metal shelving units with wheels, no text or symbols visible

Component 5

7

x8

STEP 6

5 5 ent 6

Illustration of a multi-tiered shelving unit with wheels and hanging racks (no text or symbols)

Component 6

7

x8

STEP 7

Technical line drawing of a multi-tiered shelving unit with wheels and hanging hooks (no text or symbols)

Illustration of a three-tiered metal shelving unit with wheels and hanging racks (no text or symbols)

Component 7

7

x8

8

x4

FERTIGSTELLUNG

50kg, Even Distribution Hanging Pipe: 30kg/Each Side, Even Distribution 50kg, Even Distribution

PRODUKTPARAMETER

Rancho Cucamonga, CA91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

Technical diagram showing a multi-tiered rack-mounted device with labeled parts and directional arrows indicating assembly or positioning.

Component 4

Line drawing of a metal shelving unit with three vertical supports and wheels (no text or symbols)

PASSO 5

Technical line drawing of a multi-level metal shelving unit with wheels and a top shelf, no text or symbols present.

Two stacked metal shelving units with wheels, no text or symbols visible

Component 5

7

x8

STEP 6

5 5 ent 6

Illustration of a multi-tiered shelving unit with wheels and hanging racks (no text or symbols)

Component 6

7

x8

STEP 7

Technical line drawing of a multi-tiered shelving unit with wheels and hanging hooks (no text or symbols)

Illustration of a three-tiered metal shelving unit with wheels and hanging racks (no text or symbols)

Component 7

7

x8

8

x4

COMPLETAMENTO

50kg, Even Distribution Hanging Pipe: 30kg/Each Side, Even Distribution 50kg, Even Distribution

PARAMETRO PRODOTTO

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEAST-WOOD NSW2122

Australia

Importato negli USA: San ven Technology Ltd. Suite 250, 9166 Ana-heim Place, Rancho Cucamonga, CA91730

E-CrossStu GmbH

C/O YH Consulting Limited Ufficio 147, Centurion House,

Via Roma, 101, 00186 Roma, Italia

Made in China

Technical diagram showing a multi-tiered rack-mounted device with labeled parts and directional arrows indicating assembly or positioning.

Component 4

Line drawing of a metal shelving unit with three vertical supports and wheels (no text or symbols)

PASO 5

Technical line drawing of a multi-level metal shelving unit with wheels and a top shelf, no text or symbols present.

Two stacked metal shelving units with wheels, no text or symbols visible

Component 5

7

x8

STEP 6

5 5 ent 6

Illustration of a multi-tiered shelving unit with wheels and hanging racks (no text or symbols)

Component 6

7

x8

STEP 7

Technical line drawing of a multi-tiered shelving unit with wheels and hanging hooks (no text or symbols)

Illustration of a three-tiered metal shelving unit with wheels and hanging racks (no text or symbols)

Component 7

7

x8

8

x4

TERMINACIÓN

50kg, Even Distribution Hanging Pipe: 30kg/Each Side, Even Distribution 50kg, Even Distribution

PARÁMETRO DEL PRODUCTO

C/O YH Consulting Limited Oficina 147, Centurion House,

Carretera de Londres, Staines-upon-Thames, Surrey, TW18 4AX

Hecho en china

INSTRUKCJE BEZPIECZEŃSTWA

OSTRZEŻENIE:

Technical diagram showing a multi-tiered rack-mounted device with labeled parts and directional arrows indicating assembly or positioning.

Component 4

Line drawing of a metal shelving unit with three vertical supports and wheels (no text or symbols)

KROK 5

Technical line drawing of a multi-level metal shelving unit with wheels and a top shelf, no text or symbols present.

Two stacked metal shelving units with wheels, no text or symbols visible

Component 5

7

x8

STEP 6

5 5 ent 6

Illustration of a multi-tiered shelving unit with wheels and hanging racks (no text or symbols)

Component 6

7

x8

STEP 7

Technical line drawing of a multi-tiered shelving unit with wheels and hanging hooks (no text or symbols)

Illustration of a three-tiered metal shelving unit with wheels and hanging racks (no text or symbols)

Component 7

7

x8

8

x4

UKOŃCZENIE

50kg, Even Distribution Hanging Pipe: 30kg/Each Side, Even Distribution 50kg, Even Distribution

PARAMETR PRODUKTU

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Isometric line drawing of a metal shelving unit labeled 'Mesh x3' (no other text or symbols)

1. Mesh x3

Simple line drawing of a diagonal segmented pattern with no text or symbols

1. Boven Pipe x4

Diagram of a cylindrical mechanical component with threaded end and cross-sections, labeled 'per Pine x4' (no text or symbols on the diagram itself)

1. Lower Pipe x4

Simple line drawing of a cylindrical pipe with a flat end, labeled 'Pipe x2' below (no other text or symbols)

4.Hanging Pipe x2

Simple line drawing of a six-crank hanging chain with two cylindrical ends (no text or symbols)

1. Pothook x2

1. Metal-Sheet Pothook x4

1. Clamping Piece x34

1. Schroef x4

9-1. Remwiel x2

9-2. Wheel x2

1. Wrench x1

1. Sleutel x1

graph TD
    A["ASSEMBLY STEP"] --> B["STEP 1"]
    B --> C["Component 1"]
    C --> D["STEP 2"]
    D --> E["Component 2"]
    E --> F["7 x8"]

STAP 3 1 ComPonenf 3 -5 -

STEP 4

Technical diagram showing a multi-tiered rack-mounted device with labeled parts and directional arrows indicating assembly or positioning.

Component 4

Line drawing of a metal shelving unit with three vertical supports and wheels (no text or symbols)

STAP 5

Technical line drawing of a multi-tiered shelving unit with wheels and a top shelf, no text or symbols present

Two stacked metal shelving units with wheels, no text or symbols visible

Component 5

7

x8

STEP 6

5 5 ent 6

Illustration of a multi-tiered shelving unit with wheels and hanging racks (no text or symbols)

Component 6

7

x8

STEP 7

Technical line drawing of a multi-tiered shelving unit with wheels and hanging hooks (no text or symbols)

Illustration of a three-tiered metal shelving unit with wheels and hanging racks (no text or symbols)

Component 7

7

x8

8

x4

VOLTOOING

50kg, Even Distribution Hanging Pipe: 30kg/Each Side, Even Distribution 50kg, Even Distribution

PRODUCTPARAMETER

Model	YC0002
Veilig laadgewicht	160kg
Productgrootte	1162*450*2040mm

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11 hao1602A-1609shi,

baoshanqu, sjanghai 200000 CN.

Rancho Cucamonga, CA91730

E-CrossStu GmbH

zer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Kantoor 147, Centurion House,

Londen Road, Staines-upon-Thames, Surrey, TW18 4AX

Gemaakt in China

SÄKERHETSINSTRUKTIONER

WARNING:

Technical diagram showing a multi-tiered rack-mounted device with labeled parts and directional arrows indicating assembly or positioning.

Component 4

Line drawing of a metal shelving unit with three vertical supports and wheels (no text or symbols)

STEG 5

Technical line drawing of a multi-level metal shelving unit with wheels and a top shelf, no text or symbols present.

Two stacked metal shelving units with wheels, no text or symbols visible

Component 5

7

x8

STEP 6

5 5 ent 6

Illustration of a multi-tiered shelving unit with wheels and hanging racks (no text or symbols)

Component 6

7

x8

STEP 7

Technical line drawing of a multi-tiered shelving unit with wheels and hanging hooks (no text or symbols)

Illustration of a three-tiered metal shelving unit with wheels and hanging racks (no text or symbols)

Component 7

7

x8

8

x4

KOMPLETTERING

50kg, Even Distribution Hanging Pipe: 30kg/Each Side, Even Distribution 50kg, Even Distribution

PRODUKTPARAMETER

Modell	YC0002
Säker lastvikt	160 kg
Produktstorlek	1162*450*2040 mm

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11 hao1602A-1609shi,

baoshanqu, shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEAST-WOOD NSW2122

Australien

Importerad till USA: San ven Technology Ltd. Suite 250, 9166 Ana-heim Place, Rancho Cucamonga, CA91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

Tillverkad i Kina