YS-05-1 - Roofing accessory Vevor - Free user manual and instructions

Product Type	Roof pipe boot (roofing accessory)
Brand	Vevor
Model	YS-05-1
Adaptable pipe diameter range	10 to 18 inches (approx. 25.4 to 45.7 cm)
Material	NE-5160 (industrial grade rubber or silicone)
Color	Red
Main Functions	Sealing around roof pipes; protection against water infiltration
Installation Steps	1. Cut the flashing to the appropriate size (about 20% smaller than the pipe diameter). 2. Slide the flashing over the pipe and secure the aluminum base to the roof. 3. Seal the base with silicone by pressing the sealant. 4. Secure the flashing with roofing screws.
Maintenance and Cleaning	Clean with a damp cloth and mild detergent; periodically check the condition of the gasket and silicone
Safety	Proper installation essential to avoid leaks; use quality silicone suitable for roofing
Spare Parts and Repairability	No spare parts available; the unit is not repairable, must be replaced if worn
General Information	Manufacturer: Shanghaimuxinmuyeyouxiangongsi, Shanghai, China. Technical support: www.vevor.com/support

Frequently Asked Questions - YS-05-1 Vevor

What is the compatible pipe diameter for the YS-05-1 boot?

The YS-05-1 boot is designed for pipes with a diameter between 10 and 18 inches (approx. 25 to 46 cm).

What material is the roof boot made of?

The material used is NE-5160, an industrial grade rubber or silicone offering good weather and UV resistance.

How to install the YS-05-1 boot?

1) Cut the flashing to about 20% smaller than the pipe diameter.
2) Slide it over the pipe and fix the aluminum base to the roof.
3) Seal with silicone by pressing the sealant.
4) Secure with roofing screws.

Is the boot compatible with all roof types?

It fits most sloped roofs, but it is recommended to verify compatibility of the aluminum base with your roof surface and use suitable silicone.

What is the color of the YS-05-1 boot?

The YS-05-1 model is red.

Does the boot require special maintenance?

It is advised to clean the boot with a damp cloth and mild detergent, and regularly check the condition of the gasket and silicone to ensure sealing.

Can I repair the boot if it tears?

The boot is not designed to be repaired. In case of wear or damage, it must be completely replaced.

Where can I find the full manual for the YS-05-1?

The manual is available for free download in PDF format on notice-facile.com or on the manufacturer's website www.vevor.com/support.

What is the warranty for the Vevor YS-05-1 boot?

Vevor offers a standard warranty on its products. For details, see the electronic warranty certificate at www.vevor.com/support.

Is the boot UV resistant?

The NE-5160 material offers good UV resistance and weather resistance, making it suitable for extended outdoor use.

USER MANUAL YS-05-1 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

Roof Pipe Boot

MODEL: YS-05-1

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

MODEL: YS-05-1

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you and there are any technology or software updates on our product.

Model	YS-05-1
Adaptive pipe diameter range (incl)	10-18
Material	NE-5160
Color	Red

Step 1:Cut your pipe flashing openings to fit.(The cutting size should be about 20% smaller tr the pipe diameter.)	Step 2:Slide the flashing into tube and install the aluminum base to the roof surface.
Step 3:Seal the base with silicon squeezing in the sealant and pressing the base.	Step 4:Fix pipe flashing with screws.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

A/S YH Consulting Limited Bureau 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD

New South Wales 2122 Australia

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

Dakpijplaars

MODEL: YS-05-1

NEED HELP? CONTACT US!

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Boot puller

MODEL: YS-05-1

NEED HELP? CONTACT US!

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support