M3Y - Tripod Vevor - Free user manual and instructions

Product Type	Aluminum Tripod for Contractor
Brand	Vevor
Model	M3Y
Main Material	Aluminum
Working Height	42 to 166.5 cm (16.53 to 65.55 inches)
Maximum Load	9 kg (20 lb)
Mounting Screw	5/8"-11 (standard thread)
Foot Type	Feet with metal spikes and plastic pads
Adjustment Mechanism	Quick-release clips and metal pedal
Included Accessories	Carrying strap and leg strap
Usage	Indoor and outdoor
Safety Precautions	Use on stable surface, do not overload, keep out of reach of children
Maintenance	Clean with a damp cloth, avoid shocks, regularly check stability
Repairability	Spare parts available from the manufacturer (contact support)

Frequently Asked Questions - M3Y Vevor

How to adjust the height of the M3Y tripod?

Open the quick-release clips on each leg, then extend the telescopic sections to the desired height. Close the clips to lock. You can also use the metal pedal to facilitate extension.

What is the maximum load supported by this tripod?

The maximum load is 20 lb (9 kg). Never exceed this limit to avoid any risk of tipping or damage.

Is this tripod compatible with all measuring instruments?

The mounting screw is standard 5/8"-11, making it compatible with most construction instruments (laser levels, theodolites, etc.). Check the thread compatibility of your device.

How to ensure tripod stability on uneven ground?

Use the metal spikes for soft outdoor ground (dirt, grass) and the plastic pads for hard indoor floors. Adjust the height of each leg independently to level the device.

Is the Vevor M3Y tripod difficult to transport?

No, it is lightweight aluminum and features a carrying strap and a leg strap to keep it folded, making storage and transport easy.

What are the important safety instructions?

Always set up the tripod on a stable and level surface. Never allow children to play with or near it. Regularly check stability and immediately stop use if damaged or if there is any suspicion of a problem.

How to clean and maintain the tripod?

Clean with a soft, damp cloth. Dry completely after use. Avoid harsh chemicals. Store the tripod in a dry place to prevent corrosion.

Can I get spare parts for this model?

Yes, contact Vevor technical support via www.vevor.com/support to order spare parts (feet, clips, etc.).

What type of mounting screw is provided?

The screw is a 5/8"-11 flat head, suitable for most instruments. It features a large knob for easy hand tightening.

Is this tripod suitable for daily professional use?

Yes, its robust aluminum construction and 20 lb load capacity make it suitable for heavy use on job sites. However, regularly check the tightness and general condition.

USER MANUAL M3Y Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

CONTRACTOR ALUMINUM TRIPOD

MODEL: M3Y

We continue to be committed to provide you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us whether you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

CONTRACTOR ALUMINUM TRIPOD

MODEL: M3Y

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

SAFETY INSTRUCTIONS

1. The Contractor Aluminum Tripod should be mounted on a stable surface. Do not overload.
2. The installation should be done by an adult, and children should not use it without supervision.
3. Regularly check the stability and safety of the hanger, and stop using it immediately if there is any damage or suspected problem.
4. Please read and understand this manual carefully before using the Contractor Aluminum Tripod.

Tip Over Hazard

• A child or adult can tip the Contractor Aluminum Tripod and be killed or seriously injured.
• Serious injury may occur to children and adults if not secured before installation.
• Children should not play with or around the Contractor Aluminum Tripod at any time.

PARAMETER LIST

Model	M3Y
Roof plate height range (inch)	16.53-65.55
Install thread	5/8"-11 screws
Maximum load bearing(lbs)	20

INSTRUCTIONS

Thank you very much for choosing this Contractor Aluminum Tripod. Please read all of the instructions before using it.

If there is any difference between the color of this product and the one in the instruction manual, please refer to the physical object.

1. Working height range: 16.53-65.55 inch

16.53-65.55 inch

2. Flat head 5/8"-11 screws can fit into more types of instruments. (Fig.1)

Flat head 5/8"-11 screws

Fig.1

3. Large knobs are more conducive to screwing into the instrument. (Fig.2)

Fig.2

4. Open the quick release clip, and the tripod legs can be extended. (Fig.3)

Fig.3

1. Foot on the metal pedal, more conducive to the user to operate tripod, such as the extension of the tripod leg (Fig.4)

(Fig.4)

1. Metal needles with plastic ball pad are suitable for more use sites. (Fig.5)

Fig.5 Fig.6

Metal needles are suitable for outdoor use

Plastic ball mat is suitable for indoor use

1. The tripod is equipped with carrying strap and leg strap, which convenient for users to store and carry. (Fig.7)

leg strap carrying strap Fig.7

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Flat head

Screw 5/8"-11

Fig. 1

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT CE

E-CrossStu GmbH

Mainzer Landstr.69,

Flat head

5/8"-11 screw

Fig. 1

(Fig. 4)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Flat head

5/8"-11 screws

Fig. 1

(Fig. 4)

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122

Australia

Rancho Cucamonga, CA 91730

REP. DEL

REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

flat head

5/8"-11 screws

Figure 1

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

ALUMINUM STAND FOR CONTRACTORS

MODEL: M3Y

ALUMINUM STAND EXECUTOR

MODEL: M3Y

NEED HELP? CONTACT US!

Flat head

Screws 5/8"-11

Fig.1

LIABILITY. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW1

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

CONTRACTOR ALUMINUM TRIPOD

MODEL: M3Y

NEED HELP? CONTACT US!

Flat head

5/8"-11 screws

Figure 1

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

NEED HELP? CONTACT US!

Flat head

5/8"-11 screws

Figure 1

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

www.vevor.com/support