LX-P9357A - Storage organizer Vevor - Free user manual and instructions

USER MANUAL LX-P9357A Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

PLACE TYPE PULL-OUT ORGANIZERS

DOUBLE LAYER BASKET

Model: LX-P9357; LX-P9357A

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PLACE TYPE PULL-OUT ORGANIZER

DOUBLE LAYER BASKET

Thanks for purchasing one of our products, please read carefully the assembly instructions before the installation.

Model: LX-P9357 Model:LX-P9357A

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

PRODUCT PARAMETERS

Model	Product Size (mm) W*D*H	Loading Capacity	Installation size(mm) W*D*H	Quantity
LX-P9357	Top basket: 136 x335 x 58 Bottom basket: 253 x 360x48	Top basket: (6.5 lbs) Bottom basket (11 lbs)	300x 390x 370	1 Set/box
LX-P9357A	Top basket: 136 x335 x 58 Bottom basket: 253 x 360x48	Top basket: (6.5 lbs) Bottom basket (11 lbs)	300x 390x 370	2 Set/box

ASSEMBLY PRECAUTIONS

1. Assemble needs to follow these instructions. Incorrect assembly can a hazard.
2. Wear safety goggles and heavy-duty work gloves during assembly.
3. Do not assemble when tired or when under the influence of alcohol drugs or medication.
4. Weight capacity and other product capabilities apply to a properly completely assembled product only.
5. Keep the assembly area clean and well-lit.

6. Keep bystanders out of the area during assembly.

7. Check the installation size of the model of the pull basket, and scabinet consistent with or close to the installation size for installation

USE PRECAUTIONS

WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM

TIPPING:

1. This product is not a toy. Do not allow children to play with or in this item.
2. Use as intended only. Do not sit or stand on the product.
3. Inspect before every use. Do not use it if parts are loose or dan
4. Use on Kitchen cabinet only and Do not use it alone on the gro the desktop.
5. Do not exceed the listed weight capacity. Tighten all knobs secure before applying load. Be aware of dynamic loading! The sudden load movement may briefly create an excess load, causing product failure.

PARTS LIST

Note: The Model LX-P9357A is two sets/box, and the number of accessories is twice the number in the list.

ASSEMBLY STEPS

STEP2

Install the limit screws

As shown in the figure, screw positions need to be adjusted in advance for installation on the left and right

Left side mounting

Right side mounting

STEP3

Mounting side frame “D”

STEP4

Install the Big gasket "E" and attach the Bottom ba "A" to the frame.

STEP5

Load capacity

The load-bearing capacity of the product is as follows: top basket 6.5lbs(Max), bottom basket 11lbs(Max)

Cleaning

-For cleaning, wipe the surface with a damp (not wet) cloth or wipe a clean lint free cotton cloth.

-Window cleaning liquid or a similar cleaning liquid can be used to c the surface.

Manufacturer: Shanghaiuxinmuyeyouxianggsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technique Assistance et certificat de garantie electronique www.vevor.com/support

ORGANISATEURS COULISSANTS TYPE PLACE (PANIER À DOUBLE COUCHE)

Install the limit screws

As shown in the figure, screw positions need to be adjusted in advance for installation on the left and right

Left side mounting

Right side mounting

ÉTAPE 3

Mounting side frame "D"

ÉTAPE 4

Install the Big gasket "E" and attach the Bottom bar "A" to the frame.

ÉTAPE 5

Install the Small gasket "F" and attach the Top basket "B" to the frame.

Capacité de charge

Lieu, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Install the limit screws

As shown in the figure, screw positions need to be adjusted in advance for installation on the left and right

Left side mounting

Right side mounting

SCHRITT3

Mounting side frame “D”

SCHRITT4

Install the Big gasket "E" and attach the Bottom bar "A" to the frame.

SCHRITT 5

Install the Small gasket "F" and attach the Top basket "B" to the frame.

Tragfähigkeit

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

Install the limit screws

As shown in the figure, screw positions need to be adjusted in advance for installation on the left and right

Left side mounting

Right side mounting

PASSO 3

Mounting side frame "D"

PASSO4

Install the Big gasket "E" and attach the Bottom bar "A" to the frame.

PASSO 5

Install the Small gasket "F" and attach the Top basket "B" to the frame.

Capacità di carico

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Install the limit screws

As shown in the figure, screw positions need to be adjusted in advance for installation on the left and right

Left side mounting

Right side mounting

PASO 3

Mounting side frame “D”

PASO 4

Install the Big gasket "E" and attach the Bottom ba "A" to the frame.

PASO 5

Install the Small gasket "F" and attach the Top basket "B" to the frame.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

Install the limit screws

As shown in the figure, screw positions need to be adjusted in advance for installation on the left and right

Left side mounting

Right side mounting

KROK 3

Mounting side frame “D”

KROK 4

Install the Big gasket "E" and attach the Bottom bar "A" to the frame.

KROK 5

Install the Small gasket "F" and attach the Top basket "B" to the frame.

Nośnosć

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en E-garantiecertificaat www.vevor.com/support

PLAATSTYPE UITTREKBARE

ORGANIZERS (DUBBELE LAAG MAND)

Model: LX-P9357; LX-P9357A

HULP NODIG? NEEM CONTACT MET ONS OP!

www.vevor.com/support

Install the limit screws

As shown in the figure, screw positions need to be adjusted in advance for installation on the left and right

Left side mounting

Right side mounting

STAP 3

Mounting side frame "D"

STAP 4

Install the Big gasket "E" and attach the Bottom ba "A" to the frame.

STAP 5

Laadvermogen

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Install the limit screws

As shown in the figure, screw positions need to be adjusted in advance for installation on the left and right

Left side mounting

Right side mounting

STEG 3

Mounting side frame "D"

STEG 4

Install the Big gasket "E" and attach the Bottom ba "A" to the frame.

STEG5

Lastkapacitet

Produktens bärfömagä ar som foljer: övre korg 6,5 lbs (max), botten 11 lbs (max)

Rengöring

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE