MT-020F - Manicure table Vevor - Free user manual and instructions

Product Name	Manicure Table
Brand	Vevor
Model	MT-020F
Category	Manicure Table with LED Lighting and Aspiration
Input Voltage	220-240 V ~ 50/60 Hz
Lamp Type	LED
Number of Lights	1
Suction System	Yes, with removable dust bag
Included Accessories	Armrest cushion, dust bag (x3), LED lamp, storage bag, spare fuse
Material	MDF, metal (legs)
Assembly Required	Yes, by two people, requires a Phillips screwdriver
Usage	Indoor only
Safety	Do not immerse in water, unplug before cleaning, do not use near water
Maintenance	Wipe with a soft dry cloth; do not use abrasive cleaners
Repairability	User-replaceable fuse; for any other issue, contact technical support
Warranty	Electronic warranty on vevor.com/support
Technical Support	www.vevor.com/support
Certification	CE, UKCA
Country of Origin	China (manufacturer: Shanghai)

Frequently Asked Questions - MT-020F Vevor

How to assemble the Vevor MT-020F manicure table?

Assembly requires two people and a Phillips screwdriver. Follow the steps: attach the legs by pressing on the supports, turn the table over, install the armrest cushion and dust bag under the outlet, then attach the LED lamp to the edge. Make sure the table is on a flat surface.

What is the required power supply voltage?

The table operates on a voltage of 220-240 V ~ 50/60 Hz. Check that your outlet matches the voltage indicated on the rating plate before use.

How to clean the manicure table?

Use a soft dry cloth to wipe the surface. Never use abrasive cleaners or harsh pads. Do not clean with water or other liquids to avoid electric shock.

How to replace the fuse?

First unplug the device. Locate the fuse holder (usually near the power plug), open it and replace the blown fuse with a new one of the same rating (provided with the device). Then close the fuse holder.

Can the table be used for pedicures?

This table is designed mainly for manicures. Although it can be used for pedicures with a suitable footrest, be sure to follow safety precautions and do not place liquids on the table.

What is the warranty on this product?

The warranty is electronic and can be registered on the website vevor.com/support. Keep your proof of purchase and contact technical support for any claims.

How to use the suction system?

The dust bag must be attached under the dust extractor outlet. Turn on the suction via the intended switch. Replace the bag when full. Make sure the power cord is not damaged.

Can I leave the LED lamp on for a long time?

Yes, but it is recommended to unplug the device when not in use, especially if you are away. The LED lamp is designed for extended use, but avoid leaving the table unattended.

What to do if the table does not turn on?

First check that the cord is properly plugged in and the outlet works. If nothing happens, the fuse may have blown. Replace it as indicated in the manual. If the problem persists, contact technical support.

Is the table suitable for children?

No. The device is not intended for children. Keep it out of their reach. Persons with reduced abilities should be supervised. Never let children use or play with the table.

USER MANUAL MT-020F Vevor

MANICURE TABLE

MODEL: MT-020F

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands, and do not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

MODEL: MT-020F

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

	Warning-To reduce the risk of injury, user must read instruct manual carefully.
	Compliance is a EC & UK security certification.
	This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection European Union. This applies to the product and all access marked with this symbol. Products marked as such may not discarded with normal domestic waste, but must be taken to collection point for recycling electrical and electronic devices

Safety Warnings and Precautions

Thank you for using this product. In order to ensure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions and safety rules on this page to ensure your safe use. This manual will outline safety warnings and precautions, operating, maintenance, and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we believe that the users will comply with these codes.

Please read ALL the instructions before using your machine.

1. Make sure the voltage in your outlet is the same as the voltage indicated on the appliance's rating label.
2. Do not let children, minors, and pets get close to or touch the machine.
3. Use as intended only. Do not stand or sit on the product, and do not place objects on the product.
4. To prevent electrical shock, do not immerse the cord or plug into water or other liquids.

Do not immerse the appliance in water or any other liquid.

1. Do not immerse the appliance in water or any other liquid.
2. Unplug the machine from the outlet when not in use and before cleaning.
3. Do not operate the device with a damaged cord or plug, malfunction, or mechanical damage. Send it to your nearest authorized service center for examination and repair (ONLY technicians should open up the it).
4. Using any accessories or attachments that are not provided or recommend by the manufacturer may cause injury.
5. If the machine is not to be used for a long period of time, unplug it, cl cover it and store it in a dry and safe place.
6. Do not leave the power cord hanging over the edge of table or counter come into contact with any hot surfaces.
7. Do not place the unit on or near hot air, electric burners or heaters.
8. Always switch off the power to the socket before plugging in or unplugging. Hold the plug instead of pulling on the cord.
9. Do not apply this unit to any other purposes than the indicated usage.
10. Do not place in a damp environment.
11. KEEP IT OUT OF CHILDREN'S REACH.
12. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
13. Never leave it unattended while in use.
14. INDOOR USE ONLY.
15. Ensure that the power outlet, plug and cord being used are in good working condition. Damaged components should be repaired by a certified electrician who is qualified to meet local safety and electrical codes. Even if your power connection is functioning properly, keep it away from water and avoid letting it run over cords or heating devices.
16. Avoid using it in the presence of flammable liquids, gases, dust or other explosive situations.
17. Type Y attachment: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
18. People with respiratory diseases or skin diseases are forbidden to use.
19. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
20. The product should be placed on a flat surface.
21. WARNING: Do not place drinks or other liquids on the product. If liquid is poured, unplug the power cord immediately.
22. Assembly needs to follow these instructions. Incorrect assembly can be a hazard.
23. Wear safety goggles and heavy-duty work gloves during assembly.
24. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
25. Weight and other product properties only apply to correctly and completely assembled products.
26. Keep the assembly area clean and well-lit.
27. Keep bystanders out of the area during assembly.
28. This product is not a toy. Do not allow children and pets to play with or approach this item.
29. Inspect before every use. Do not use it if parts are loose or damaged.

PART LISTS

1. manicure table x1PCS		2. Dust bag X3PCS		3. LED light X1PCS
4. Hand pillow x1PCS		5. Storage bag x1PCS		Fuse x1PCS

Note: the quantity of parts shown in the manual is the actual usage; unused parts are spare parts.

ASSEMBLY STEPS

1. Please dispose of all plastic bags carefully and keep them away from children and pets.
2. Check all components provided according to the list in this manual. Make sure you have all of the parts listed.
3. Although particular attention is paid when manufacturing this product, you should be careful during the assembly process to avoid being scratched by sharp edges.
4. Wear eye-protective goggles and protective gloves during assembly and use.
5. The product should be placed on a flat surface.
6. The product requires two people to assemble.
7. The product requires the use of a Phillips screwdriver (cross screwdriver) to be purchased by oneself.
8. If uneven product gaps are found, they can be disassembled and adjusted.

STEP1: Press down on the drop leaf supports in the direction shown in the figure to secure the table legs.

STEP2: Flip the table 180 degrees so that it is right-side up. Put Part 4 (the armrest pad) on the table. Attach Part 2 (the dust bag) under the dust collector. The position of the dust collector's switch is shown in the figure.

STEP3: Clip the table lamp to the edge of the table. After connecting the power supply, press the power button to turn the lamp on.

CLEANING AND STORAGE

1. Wipe with a soft, dry cloth. Never use an abrasive cleanser or harsh pad. Clean with water or other liquids.
2. Be sure to keep the product dry.
3. Children are not allowed to wipe the product to avoid tipping and falling.
4. Regularly adding industrial grease to the door spindle can reduce noise and extend service life.

TIPS

If the product does not work after being powered on, please check whether the fuse is burned out.

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangcheng Road 803 Nong 11 Hao 1602A-1609 Shi, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Bureau 147,

Maison Centurion, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr. 69,

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

CLEANING AND STORAGE

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr. 69,

CLEANING AND STORAGE

Centurion House, London Road,

Staines upon Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

NEED HELP? CONTACT US!

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPREZENT KE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE