KH-Q02 - Cutting machine Vevor - Free user manual and instructions

Product Type	Soap cutting machine (soap cutter)
Brand	Vevor
Model	KH-Q02
Cutting mode	Manual knife cutting
Cutting spacing	1 inch (25.4 mm)
Mold capacity	Up to 44 oz (1301 ml) of melted soap
Materials	Bamboo frame, stainless steel blades, silicone mold, PP/PE accessories
Included components	Cutting frame, silicone mold placement box, silicone mold, wavy cutter, straight edge cutter, 105 sealing stickers, 100 plastic bags, user manual
Types of blades provided	Interchangeable straight blade and wavy blade
Intended use	Only for cutting handmade soap
Safety	Sharp blades: handle with care, keep out of reach of children
Maintenance	Wash with clean water after each use, dry thoroughly; do not put in dishwasher
Operation	Pour melted soap into the mold, let solidify for 1-2 hours, unmold, place in the frame and cut with the chosen cutter
Support and warranty	Electronic warranty and technical support via www.vevor.com/support
Power supply	None (manual tool)
Weight	Approx 1.5 kg (estimate)
Dimensions	Approx 35 x 15 x 15 cm (estimate)

Frequently Asked Questions - KH-Q02 Vevor

How to use the KH-Q02 soap cutting machine?

Pour melted soap (max 44 oz) into the silicone mold placed in the box. Let it solidify for 1 to 2 hours. Carefully unmold, place the soap in the cutting frame, then use the straight or wavy cutter by aligning the blade in the slot to cut.

What types of blades are provided?

The set includes two interchangeable blades: a wavy cutter and a straight edge cutter. You can choose according to the desired effect.

Can I use this machine to cut food?

No, this device is designed only for cutting soap. Do not use it for food processing, as it could pose health risks and damage the tool.

How to clean the machine after use?

Wash all parts with clean water after each use and dry them thoroughly. Never put the components in the dishwasher and avoid any abrasive products.

Where to find technical support or warranty?

Visit the website www.vevor.com/support to get technical assistance and the electronic warranty certificate. You can also contact customer service through this portal.

Is the silicone mold reusable?

Yes, the silicone mold is designed to be reused many times. After each use, clean it with water and dry it before storing.

What to do if the blade is dull?

The stainless steel blades can become dull over time. You can sharpen them with a honing rod or replace them. Vevor offers spare parts; contact support via the official website.

What is the maximum capacity of the mold?

The mold can hold up to 44 oz (1301 ml) of melted soap. Do not exceed this limit to avoid overflow.

Can I buy spare parts?

Yes, spare parts such as blades, molds, or stickers are available. Visit www.vevor.com/support to order or get information.

How to unmold the soap without breaking it?

After solidification, gently turn the silicone mold over by pressing on the edges. If necessary, push the bottom of the mold. The soap should come off easily.

USER MANUAL KH-Q02 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SOAP CUTTER

MODEL: KH-Q02

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. You are kindly reminded to verify carefully when you are placing an order with us whether you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

SOAP CUTTER

MODEL: KH-Q02

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING: Always follow basic safety precautions when using these devices.

These include:

1. The device should not be used with children. There are blades or steel wires on the device. Children may encounter injury accidents. Therefore, this product should be placed in a position not touched by children.
2. For optimal operation and service life of the device, please follow the instructions.
3. Always clean this equipment immediately after every use. To maintain the appearance and increase the service life, clean it daily.
4. Care should be taken not to touch the banging blades or steels directly or operate with gloves during operation.
5. Do not put these devices in a dishwasher or other automatic cleaning device cleaning.
6. The use of accessories or modifications not provided by the manufacturer m cause hazards.
7. Only use this equipment for cutting soap! This product is not suitable for processing foods.
8. Before using this equipment for the first time, please remove all packaging fixing materials according to the illustration and use them after installation.
9. To the replace blade or steel sets, please ensure that the specification and models of blade plate are consistent.

WARNING: Blades or steels can cause cuts. To avoid injury from blades or handle with care and watch your fingers.

SAVE THESE INSTRUCTIONS

MODEL AND PARAMETERS

Model	KH-Q02
Cutting Mode	Knife Cutting
Cutting Spacing	1inch
Capacity	48oz
Material	Bamboo & Stainless Steel & Silica Gel & PP/PE

COMPONENTS

No.	Name	Qty
1	lid	1
2	Soap cutting frame	1
3	Silicone mold placement box	1
4	Silicone mold	1
5	Wavy cutter	1
6	Straight edge cutter	1
7	Sealing sticker	105
8	Plastic bag	100
9	User Manual	1

OPERATION

1. Place the silicone mold(4) into the silicone mold placement box(3).

1. Pour the melted soap (less than 44 oz) into the silicone mold.

NOTE: To make personalized soap, you need to learn more manufacturing methods and recipes for modulation.

1. Put the lid on and let it sit in a horizontal position for 1 to 2 hours while the soap takes shape.

1. When completely solidified, carefully remove the silicone mold from the mold box.

1. Carefully remove the soap from the mold to get the molded soap. (Flip the silicone perimeter if necessary.)

1. Place the soap into the soap cutting frame carefully, choose your favorite shape knife and align it with the knife slot to make a cut.

MAINTENANCE

1. Wash and dry with water after each use.
2. Keep out of reach of children.

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Imported into AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD

New South Wales 2122 Australia

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Imported into AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

1. Pour the melted soap (less than 1.3 liters) into the silicone mold.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE