HH-SPN006 - Cooking pan Vevor - Free user manual and instructions

Find the device manual for free HH-SPN006 Vevor in PDF.

Vevor HH-SPN006 - Cooking pan
📄 64 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor HH-SPN006 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Grill Plate / Cooking Pan
Brand Vevor
Model HH-SPN006
Use Household
Maximum Temperature 260 °C (500 °F)
Main Material Cast Iron
Coating Non-stick
Number of Plates 1
Functions Cooking, grilling
Included Accessories Handles (2), screws (4), nuts (4)
Care Hand wash with warm water and mild detergent
Cleaning Do not put in dishwasher
Safety Wear protective gloves, hot surface, do not leave unattended
Storage Store dry after complete cooling
Warranty Electronic warranty certificate at www.vevor.com/support
Manufacturer Shanghaimuxinmuyeyouxiangongsi, Shanghai, China
Importer (Australia) SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122
Importer (United States) Sanven Technology Ltd, Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Frequently Asked Questions - HH-SPN006 Vevor

How to clean the Vevor HH-SPN006 grill plate?
After complete cooling, clean it with a cloth, warm water, and mild detergent. Avoid abrasive cleaners, steel wool, and brushes that could scratch the surface.
Can the plate be put in the dishwasher?
No, never put the plate in the dishwasher. Cleaning must be done by hand to preserve the coating.
What is the maximum temperature supported by the plate?
The maximum temperature is 260 °C (500 °F). Do not exceed this limit to avoid damaging the product.
Should the plate be preheated before use?
It is recommended to preheat the plate over medium heat for a few minutes before placing food on it. The first use may emit a slight smoke or odor, which is normal.
Can I use metal utensils on the plate?
Avoid using spatulas or sharp tools that could scratch the surface. Prefer utensils made of wood, silicone, or heat-resistant plastic.
How to install the included handles?
Attach the handles using the provided screws and nuts. The screws go inside the product and the nuts on the outside. Make sure they are tightened before each use.
Why does my plate emit smoke during first use?
It is normal. During first heating, manufacturing residues may burn. Let it heat empty for a few minutes in a well-ventilated area, then clean it.
Can I cook frozen foods directly on the plate?
It is advisable to thaw frozen foods before cooking to avoid oil splatters and ensure even cooking. Dry the food with paper towels before placing on the plate.
How to avoid oil splatters during cooking?
Dry the food with a clean towel or paper towels to remove excess moisture. Use a moderate temperature and do not overload the plate.
Where to find technical support and warranty for this product?
Technical support and the electronic warranty certificate are available on www.vevor.com/support. You can also contact customer service for any questions.

User questions about HH-SPN006 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Cooking pan in PDF format for free! Find your manual HH-SPN006 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HH-SPN006 by Vevor.

USER MANUAL HH-SPN006 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

GRILL GRIDDLE PAN

MODEL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two handles (no text or symbols)

MODEL: HH-SP002 / HH-SP004 / HH-SP005 MODEL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side connectors (no text or symbols)

Line drawing of a rectangular tray with two handles (no text or symbols)

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray with handles and a handle (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Vevor HH-SPN006 - NEED HELP? CONTACT US! - 1Warning-To reduce the risk of injury, user must read instructions manual carefully.
Vevor HH-SPN006 - NEED HELP? CONTACT US! - 2Wear protective gloves
WARNING!Maximum temperature resistance: Max500° F (260° C), The product cannot cool down rapidly!
WARNING!The product is prohibited from dry burning!

IMPORTANT SAFEGUARDS

Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions and safe rules in this page to ensure your safe use. This manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we believe that the users will comply with these codes.

Please read ALL the instructions before using your machine.

  1. DO NOT let children, minors, or pets get close to or touch the machine.
  2. DO NOT touch the hot surface directly with your hands. Must use anti-slip gloves.
  3. Using any accessories or attachments that are not provided or recommended by the manufacturer may cause injury.
  4. Do not use it in poorly ventilated places or for commercial purposes.
  5. Do not attempt to modify the machine in any way.
  6. If the machine is not to be used for a long period of time, clean and store it in a dry and safe place.
  7. KEEP IT OUT OF CHILDREN'S REACH.
  8. Never leave it unattended while in use.
  9. Avoid using it in the presence of flammable liquids, gases, dust or other explosive situations.
  10. Extreme caution must be taken when moving an appliance containing hot oil or other hot liquids.
  11. Children shall not play with the machine alone. Children shall only make cleaning and user maintenance with supervision.
  12. The machine must never be left unattended during operation or cleaning.
  13. Make sure that the product is always placed on a firm, level combustion support.
  14. The machine should be located in an open area with good ventilation, away from trees and fences.
  15. While every effort has been made in the manufacture of your machine to remove any sharp edge, you should handle all components with care in order to avoid accidental injury.
  16. Keep a fire extinguisher within a safe and accessible distance and make sure those operating the machine are trained to use it.
  17. Keep away from flammable materials and fluids such as petroleum, alcohol, diesel fuel, kerosene, and charcoal lighter fluid, or vehicles while in use.
  18. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
  19. Do NOT store the machine until surfaces are cold.
  20. DO NOT wear loose clothing, and ensure that long hair is tied back when around the machine when it is hot or in use.
  21. DO NOT use this product as a furnace.
  22. Ensure the product has a minimum of 2 meters overhead clearance and a minimum of 2 meters clearance from other surrounding items.
  23. This machine is intended for domestic cooking only. It is not designed for commercial or industrial purposes.
  24. Never use plastic or aluminum foil dishes on the machine.
  25. Perishable food, plastic items, and aerosols may be affected by heat and should not be stored above or below the machine unit.
  26. Do not place clothes above the machine and avoid using it as a clothes

WARNING! This product will become very hot, keep it from moving during operation.

WARNING! Remove all packaging materials and keep them for future use. Packaging materials are not a toy.

WARNING! Don't let children play with the packaging materials. If they swallow the packaging materials, they will suffocate!

WARNING! Keep children and pets away. Children must not operate or plan near this machine.

WARNING! Failure to follow instructions could result in death, serious injury, and property loss.

ATTENTION! Burning materials can cause oxidation and discoloration of the product surface, which is normal and does not affect its use.

ATTENTION! An uneven ignition source can cause slight deformation of the product surface, which is a normal phenomenon and does not affect the use of the product.

ATTENTION! The product cannot be placed in the dishwasher for cleaning.

SAFETY OF FOOD

The safety of food is a key part for enjoying outdoor cooking. To keep from harmful bacteria, read these three basic steps:

  1. Clean: Use HOT SOAPY water to wash hands, utensils, and surfaces before and after contacting raw meat and poultry.
  2. Separate: To avoid cross contamination, separate raw meats and poultry from ready-to-eat foods. Use a clean platter and utensils when removing cooked foods.
  3. Cook: Make sure meat and poultry are cooked thoroughly to kill bacteria. You can use a thermometer to test proper internal food temperatures.

PRODUCT USE

Before using the appliance for the first time, peel off any promotional material and packaging materials, and check that the cooking plates are clean and free of debris. If necessary, wipe them over with a damp cloth. Spread over with an absorbent kitchen towel and wipe off any excess oil. When your product is heated for the first time, it may emit slight smoke or odor, which is normal for many products and does not affect the safety of your product.

  1. Wear protective gloves when cooking.
  2. Using clips or other tools to move and flip food

ATTENTION! Before each use, check the handle for looseness and keep the handle and screws tight.

ATTENTION! While every care is taken in the manufacture of this product, care must be taken during assembly in case sharp edges are present.

Technical line drawing of a rectangular frame with mounting brackets and support structures (no text or symbols)

Handle x 2 PCS, Screw x 4 PCS, Nut x 4 PCS

Note: The screws are on the inside of the product, and the nuts are on the outside of the product.

CLEANING AND STORAGE

  1. Ensure the product cools down before cleaning.
  2. The product can be cleaned using a dishcloth, warm water, and a mild detergent. Avoid using abrasive cleaners, wire wool, and brushes as these may scratch the surface.
  3. Before storage, always make sure the product is cool and dry.
  4. Store the appliance in a dry and clean area.

ATTENTION! The product cannot be placed in the dishwasher for cleaning!

TIPS

  1. Food should be dried with a clean towel or oil-absorbent paper to prevent oil splashing.
  2. Pay attention to the food status and flip the noodles in a timely manner.
  3. After each cooking, clean and maintain the product promptly after it cools down.
  4. It is not advisable to cook at excessively high temperatures to avoid burning the ingredients. Overheating the oven can cause the frying pan to deform or be damaged due to excessive heating.
  5. Do not use a shovel or other sharp tools to scrape the frying pan, as this may scratch it.

CAUTION: Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite.

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

HH-SPN009 / HH-SPN006 / HH-SPN007

HH-SP010 / HH-SPN012

MODEL: HH-SP002 / HH-SP004 / HH-SP005 MODEL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or container with two side handles (no text or symbols)

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

NEED HELP? CONTACT US!

C/O YH Consulting Limited Bureau 147,

Staines-upon-Thames, Surrey, TW18 4AX

EU REPRESENTATIVE

E-CrossStu GmbH

Mainzer Landstr.69,

MODEL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODEL: HH-SP002 / HH-SP004 / HH-SP005 MODEL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or container with two side handles (no text or symbols)

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Vevor HH-SPN006 - NEED HELP? CONTACT US! - 6

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Model HH-SP010 / HH-SPN012

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODEL: HH-SP002 / HH-SP004 / HH-SP005 MODEL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or tray with two side handles (no text or symbols)

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

Screw x 4 pcs. Handle x 2 pcs. Pad x 4 pcs.

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD

New South Wales 2122 Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim

Place, Rancho Cucamonga, CA 91730

Representation of the United Kingdom

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Vevor HH-SPN006 - TOUGH TOOLS, HALF PRICE - 6

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODEL: HH-SP002 / HH-SP004 / HH-SP005 MODEL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or container with two side handles (no text or symbols)

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

CE Representative

E-CrossStu GmbH

Mainzer Landstr.69, 60329

Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Technical line drawing of a rectangular tray or tray with two side handles (no text or symbols)

Model: HH-SP002 / HH-SP004 / HH-SP005 Model: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray with two side handles (no text or symbols).

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols).

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Vevor HH-SPN006 - VEVOR® - 5

MODEL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols).

MODEL: HH-SP002 / HH-SP004 / HH-SP005 MODEL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols).

Line drawing of a rectangular tray with two side handles (no text or symbols).

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols).

NEED HELP? CONTACT US!

Handle x 2 pieces Nut x 4 pieces Screw x 4 pieces

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC-REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols).

MODEL: HH-SP002 / HH-SP004 / HH-SP005 MODEL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols).

Line drawing of a rectangular tray with two side handles (no text or symbols).

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols).

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : HH-SPN006

Category : Cooking pan