HH-SPN009 - Cooking pan Vevor - Free user manual and instructions

USER MANUAL HH-SPN009 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

GRILL GRIDDLE PAN

MODEL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODEL: HH-SP002 / HH-SP004 / HH-SP005 MODEL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or tray with two handles (no text or symbols)

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or tray with handles and a handle (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

	Warning-To reduce the risk of injury, user must read instructions manual carefully.
	Wear protective gloves
WARNING!	Maximum temperature resistance: Max500° F (260° C), The product cannot cool down rapidly!
WARNING!	The product is prohibited from dry burning!

IMPORTANT SAFEGUARDS

Thank you for using this product. In order to make sure that you can opera machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions and safe rules in this page to ensure your safe use. This manual will outline safety wall and precautions, operating, maintenance and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we believe that the uses will comply with these codes.

Please read ALL the instructions before using your machine.

1. DO NOT let children, minors, or pets get close to or touch the machine.
2. DO NOT touch the hot surface directly with your hands. Must use anti so gloves.
3. Using any accessories or attachments that are not provided or recommend by the manufacturer may cause injury.
4. Do not use it with poor ventilation places or for commercial purposes.
5. Do not attempt to modify the machine in any way.
6. If the machine is not to be used for a long period of time, clean and store it in a dry and safe place.

7. KEEP IT OUT OF CHILDREN'S REACH.

8. Never leave it unattended while in use.

9. Avoid using it in the presence of flammable liquids, gases, dust or other explosive situations.
10. Extreme caution must be taken when moving an appliance containing hot other hot liquids.
11. Children shall not play with the machine alone. Children shall only make cleaning and user maintenance with supervision.
12. The machine must never be left unattended during operation or cleaning.
13. Make sure that the product is always placed on a firm, level combustion support.
14. The machine should be located in an open area with good ventilation, a from trees and fences.
15. While every effort has been made in the manufacture of your machine to remove any sharp edge, you should handle all components with care in order to avoid accidental injury.
16. Keep fire extinguisher within a safe and accessible distance and make such those operating the machine are trained to use it.
17. Keep away from flammable material and fluids such as petroleum, alcohol diesel fuel, kerosene and charcoal lighter fluid or vehicles while in use.
18. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
19. Do NOT store the machine until surfaces are cold.
20. DO NOT wear loose clothing, and ensure that long hair is tied back when around the machine when it is hot or in use.
21. DO NOT use this product as a furnace.
22. Ensure the product has a minimum of 2 meters overhead clearance and minimum of 2 m clearance from other surrounding items.
23. This machine is intended for domestic cooking only. It is not designed for commercial or industrial purposes.

24. Never use plastic or aluminum foil dishes on the machine.

25. Perishable food, plastic items and aerosols may be affected by heat and should not be stored above or below the machine unit.

26. Do not place clothes above the machine and avoid using it as a clothes

WARNING! This product will become very hot, keep it from moving during operation.

WARNING! Remove all packaging materials and keep them for future use. Packaging materials are not a toy.

WARNING! Don't let children play with the packaging materials. If they swallow the packaging materials, they will suffocate!

WARNING! Keep children and pets away.Children must not operate or plan near this machine.

WARNING! Failure to follow instructions could result in death, serious bad injury, and property loss.

ATTENTION! Burning materials can cause oxidation and discoloration of t product surface, which is normal and does not affect its use.

ATTENTION! An uneven ignition source can cause slight deformation of the product surface, which is a normal phenomenon and does not affect the use of the product.

ATTENTION! The product cannot be placed in the dishwasher for cleaning

SAFETY OF FOOD

The safety of food is a key part for enjoying the outdoor cooking. To keep from harmful bacteria, read these three basic steps:

1. Clean: Use HOT SOAPY water to wash hands, utensils, and surfaces before and after contacting raw meat and poultry.
2. Separate: To avoid cross contamination, separate raw meats and poultry for ready-to eat foods to. Use a clean platter and utensils when removing coke foods.
3. Cook: Make sure meat and poultry are cooked thoroughly to kill bacteria. can use a thermometer to test proper internal food temperatures.

PRODUCT USE

Before using the appliance for the first time, peel off any promotional material packaging materials, and check that the cooking plates are clean and free of. If necessary, wipe them over with a damp cloth. Spread over with an absorb kitchen towel and wipe off any excess oil. When your product is heated for time, it may emit slight smoke or odor, which is normal for many products, a not affect the safety of your product.

1. Wear protective gloves when cooking.
2. Using clips or other tools to move and flip food

ATTENTION! Before each use, the handle must be checked for looseness an handle and screws must be kept tight.

ATTENTION! Whilst every care is taken in the manufacture of this product, it must be taken during assembly in case sharp edges are present.

Technical line drawing of a rectangular frame with mounting brackets and support structures (no text or symbols)

Handle x 2 PCS Screw x 4 PCS Nut x 4 PCS

Note: The screws are on the inside of the product, and the nuts the outside of the product.

CLEANING AND STORAGE

1. Ensure product cooling before cleaning.
2. Product can be cleaned using a dishcloth, warm water and a cor detergent. Avoid using abrasive cleaners, and wire wool and brushes these may scratch the surface.
3. Before storage, always make sure the product is cool and dry.
4. Store the appliance in a dry and clean area.

ATTENTION! The product cannot be placed in the dishwasher for cleaning!

TIPS

1. Food should be dried with a clean towel or oil absorbent paper to oil splashing.
2. Pay attention to the food status and flip the noodles in a timely
3. After each cooking, clean and maintain the product promptly after cools down.
4. It is not advisable to cook at excessively high temperatures to avoid burning the ingredients. Overheating the oven can cause the frying pan deform or be damaged due to excessive heating.
5. Do not use a shovel or other sharp tools to scrape the frying pan scratching.

CAUTION: Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

HH-SPN009 / HH-SPN006 / HH-SPN007

HH-SP010 / HH-SPN012

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODÈLE : HH-SP002 / HH-SP004 / HH-SP005 MODÈLE : HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or container with two side handles (no text or symbols)

MODÈLE : HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Technical line drawing of a rectangular frame with mounting brackets and support structures (no text or symbols)

C/O YH Consulting Limited Bureau 147,

Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

MODELL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODELL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODELL: HH-SP002 / HH-SP004 / HH-SP005 MODELL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or container with two side handles (no text or symbols)

MODELL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

Technical line drawing of a rectangular frame with mounting brackets and support structures (no text or symbols)

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Modello HH-SP010 / HH-SPN012

MODELLO: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODELLO: HH-SP002 / HH-SP004 / HH-SP005 MODELLO: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or tray with two side handles (no text or symbols)

MODELLO: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

Technical line drawing of a rectangular frame with mounting brackets and support structures (no text or symbols)

Vite x 4 pz.Maniglia x 2 Pado x 4 pz.

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim

Luogo, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

CONSULENZA YH LIMITATA.

C/O YH Consulting Limited Ufficio 147,

Casa del centurione, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELO: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODELO: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODELO: HH-SP002 / HH-SP004 / HH-SP005 MODELO: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or container with two side handles (no text or symbols)

MODELO: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

Technical line drawing of a rectangular frame with mounting brackets and support structures (no text or symbols)

Casa Centurión, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

Mainzer Landstr.69, 60329

Fráncfort del Meno.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Technical line drawing of a rectangular tray or tray with two side handles (no text or symbols)

Modele: HH-SP002 / HH-SP004 / HH-SP005 Modele: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or tray with two side handles (no text or symbols)

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Technical line drawing of a rectangular frame with mounting brackets and support structures (no text or symbols)

C/O YH Consulting Limited Biuro 147,

Dom Centuriona, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

MODEL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODEL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODEL: HH-SP002 / HH-SP004 / HH-SP005 MODEL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or tray with two side handles (no text or symbols)

MODEL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Technical line drawing of a rectangular frame with mounting brackets and support structures (no text or symbols)

Handvat x 2 stuks Moer x 4 STUK\$Schroef x 4 stuks

C/O YH Consulting Limited Kantoor 147,

Centurionhuis, Londenweg,

Staines-upon-Thames, Surrey, TW18 4AX

EC-REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL: HH-SP002 / HH-SP003 / HH-SP004 / HH-SP005 HH-SPN009 / HH-SPN006 / HH-SPN007 HH-SP010 / HH-SPN012

MODELL: HH-SP003 / HH-SPN006 / HH-SPN007

Line drawing of a rectangular metal tray with two side handles (no text or symbols)

MODELL: HH-SP002 / HH-SP004 / HH-SP005 MODELL: HH-SPN009

Line drawing of a rectangular tray or container with a handle and side supports (no text or symbols)

Line drawing of a rectangular tray or tray with two side handles (no text or symbols)

MODELL: HH-SP010 / HH-SPN012

Line drawing of a rectangular tray or container with a handle and side slots (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Technical line drawing of a rectangular frame with mounting brackets and support structures (no text or symbols)

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support