FT-T-1812 - Wall mount Vevor - Free user manual and instructions

Find the device manual for free FT-T-1812 Vevor in PDF.

Vevor FT-T-1812 - Wall mount
📄 64 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor FT-T-1812 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Vevor
Model FT-T-1812
Product Type Wall mount for shelf or counter
Material Steel (estimated)
Load Capacity Up to 45 kg (100 lb) per pair depending on installation
Dimensions (W x D) Approx. 46 x 30 cm (18 x 12 in) (estimated)
Weight Approx. 1.5 kg per bracket
Color Black or white (depending on version)
Package Contents 2 brackets, 16 mounting screws
Mounting Type On wooden stud, installation before drywall
Tools Required Drill, level, tape measure, Phillips screwdriver
Recommended Use Countertops, desks, mantels, shelves
Care and Cleaning Wipe with a damp cloth and dry
Safety Do not exceed maximum load; screw into studs
Spare Parts and Repairability Not user repairable; contact technical support
Warranty Technical support available at vevor.com/support

Frequently Asked Questions - FT-T-1812 Vevor

What is the maximum load capacity of this wall mount?
The maximum load capacity is approximately 45 kg (100 lb) per pair, depending on fixation into solid studs. Never exceed this limit to avoid any risk of sagging or falling.
Is this bracket suitable for installation in drywall only?
No, this bracket must be screwed directly into the wooden studs behind the drywall. Fixing into drywall alone may cause the bracket to pull out.
What tools are needed for installation?
You will need a drill, a level, a tape measure and a Phillips screwdriver. A stud finder is also recommended to locate the studs.
Are the supplied screws suitable for all studs?
The supplied screws are designed for standard wooden studs, but check their length relative to the thickness of your drywall. If they are too short or too long, use screws suitable for your project.
Can I use this bracket for a granite kitchen countertop?
Yes, provided the granite rests on the bracket and the total load does not exceed the capacity. Ensure the brackets are properly spaced and fixed into solid studs.
How to install the bracket if the drywall is already up?
It is best to install the bracket before the drywall as indicated in the instructions. If the drywall is already in place, you must cut an opening around the bracket to access the stud, or use suitable anchors if the stud is not accessible.
What is the recommended distance between two brackets?
For a shelf or countertop, space the brackets about 60 to 80 cm (24 to 32 inches) depending on the load. For heavy loads, reduce the spacing. Refer to the manufacturer's instructions.
Is the bracket adjustable for tilt?
No, this bracket is fixed. However, for brackets over 40 cm (16 inches), it is advisable to tilt them slightly upward (1/8 to 1/4 inch) during installation to compensate for deflection under load.
Is this bracket compatible with solid wood shelves?
Yes, it is perfectly suitable for solid wood shelves. Ensure the shelf thickness is sufficient to sit securely on the horizontal part of the bracket.
What to do if a part is missing or quality issue?
Contact Vevor customer service via their website www.vevor.com/support for technical assistance or warranty claim. Keep your proof of purchase.

User questions about FT-T-1812 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Wall mount in PDF format for free! Find your manual FT-T-1812 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FT-T-1812 by Vevor.

USER MANUAL FT-T-1812 Vevor

FREE HANGING BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Technical Support and E-Warranty Certificate

www.vevor.com/support

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Technical line drawing of a metal bracket with mounting holes and a slot (no text or symbols).

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Vevor FT-T-1812 - MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812 - 2

Warning - To reduce the risk of injury, user must read the instructions manual carefully.

Warnings

1.1 Shelf brackets must be correctly installed into studs or wall blocking. Failure to do so may result in sagging shelves, falling objects, or serious injury. 1.2 Every bracket weight class and length has been engineered for use with specific shelf capacities/dimensions. Failure to follow our specified capacity ratings and correct shelf dimensions may result in sagging shelves, falling objects, or serious injury.

Part List
CodePictureQty.
1Vevor FT-T-1812 - Warnings - 12
2[K0C7]16

Required Tools

Vevor FT-T-1812 - Required Tools - 1DrillVevor FT-T-1812 - Required Tools - 2Level
Vevor FT-T-1812 - Required Tools - 3Measuring TapeVevor FT-T-1812 - Required Tools - 4Phillips-head Screwdriver

Product Installation

Technical line drawing of two mechanical bracket assemblies with mounting hardware (no text or symbols).

Step 1: Install Bracket directly into the wood wall stud using appropriate wood screws.

NOTE: We have provided screws.

HOWEVER, make sure the length of the provided screws are appropriate for your project. If not appropriate, DO NOT use the screws provided. Each project is different, so protect your project by measuring before adding the screws.

PRO TIP: (For larger brackets 16 inches or more in length, co-pitching them up 1/8 to 1/4 inch, especially when heavier materials are used. This will help with the slight flex that could occur.

Simple line drawing of three rectangular objects placed on a diagonal line (no text or symbols).

Step 2: Once the Brackets are installed, apply Sheetrock as cutting around the bracket to leave the horizontal piece of the exposed.

Simple line drawing of a rectangular block with a diagonal line extending from its top (no text or symbols).

Step 3: Place your countertop, desk top or mantel directly on Bracket & caulk with clear silicone.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

ECREP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

SUPPORT DE SUSPENSION LIBRE

MODÈLE : FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Affordable. Reliable. Home Improvement.

FREE HANGING

SUPPORT

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Technical line drawing of a metal bracket with mounting holes and a slot (no text or symbols).

YH CONSULTING LIMITED. A/S YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

Affordable. Reliable. Home Improvement.

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

FREE HANGING

MOUNT

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Technical line drawing of a metal bracket with mounting holes and a slot (no text or symbols).

YH CONSULTING LIMITED. C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EG-Vertreter

Affordable. Reliable. Home Improvement.

FREE-HANGING BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

electronics www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

FREE-HANGING BRACKET

BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Technical line drawing of a metal bracket with mounting holes and a slot (no text or symbols).

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Representation of the United Kingdom

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Vevor FT-T-1812 - VEVOR - 3

Affordable. Reliable. Home Improvement.

FREE-HANGING BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Affordable. Reliable. Home Improvement.

FREE HANGING

BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Technical line drawing of a metal bracket with mounting holes and a slot (no text or symbols)

YH CONSULTING LIMITED. A/C YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Representante del CE

E-CrossStu GmbH

Mainzer Landstr.69,

Affordable. Reliable. Home Improvement.

FREE HANGING BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Affordable. Reliable. Home Improvement.

FREE HANGING

BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Technical line drawing of a metal bracket with mounting holes and a slot (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

Vevor FT-T-1812 - Affordable. Reliable. Home Improvement. - 2

Affordable. Reliable. Home Improvement.

FREE HANGING BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

FREE HANGING BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Technical line drawing of a metal bracket with mounting holes and a slot (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

EC-REP

Affordable. Reliable. Home Improvement.

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

FREE HANGING BRACKET

MODEL: FT-T-1212 \ FT-T-1412 \ FT-T-1612 \ FT-T-1812

Technical line drawing of a metal bracket with mounting holes and a slot.

Simple line drawing of a key.

Simple line drawing of a screwdriver.

Product Installation

Technical line drawing of two structural components with mounting brackets and mounting holes.

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Vevor FT-T-1812 - Product Installation - 2

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : FT-T-1812

Category : Wall mount