DL-RSB05S - Garden furniture Vevor - Free user manual and instructions
Find the device manual for free DL-RSB05S Vevor in PDF.
User questions about DL-RSB05S Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Garden furniture in PDF format for free! Find your manual DL-RSB05S - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DL-RSB05S by Vevor.
USER MANUAL DL-RSB05S Vevor
Affordable. Reliable. Home Improvement.
OUTDOOR STORAGE BENCHES
MODEL: DL-RSB05 / DL-RSB05S
MODEL:DL-RSB05 / DL-RSB05S
natural_image
Line drawing of a simple rectangular bed with curved legs and a side arm (no text or symbols)This is the original instruction, please read all manual instructions care before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product received. Please forgive us that we won't inform you again if there are technology or software updates on our product.
| PARTS &HARDWARE LIST | |||
| PART | FIGURE | DESCRIPTION | QTY |
| A |  | Front Panel | 1 |
| B |  | Back Panel | 1 |
| C |  | Right Panel | 1 |
| D |  | Left Panel | 1 |
| E |  | Bottom Panel | 1 |
| F |  | Top Panel | 1 |
| G |  | M4*10 | 2 |
| H |  | Cushion | 1 |
| I |  | M6*30 Bolt | 14 |
| J |  | Washer | 14 |
| K |  | Hinge Support | 2 |
| L |  | Bolt for Hinge Support | 4 |
| M |  | Wrench | 1 |
| N |  | Allen Key | 1 |
| EXTRA PARTS | |||
| PART | FIGURE | DESCRIPTION | QTY |
| G |  | M4*10 | 1 |
| I |  | M6*30 Bolt | 2 |
| J |  | Washer | 2 |
ATTENTION:
Keep children away during assembly. This item contains small parts that can be dangerous forchildren.
Children should always be under direct adult supervision while using t product.
Do not discard of any of the packaging until you have checked that have all of the parts and fittings required.
Carefully remove the contents from the package. If any parts are mis do not attempt to use the product until they have been obtained.
Make sure that each bolt needed for all steps matches the correspondence figure ensure proper assembly.
text_image
50% 100%Before the complete installation, do not tighten the screws all the way. You can first tighten the screws to 50%, and then once the entire a is complete, you can fully tighten all the screws
| STEP 1 | Attach Right Panel (C) to Back Panel (B) using Bolt Washers (J).Hand tighten only. |
| I x2 J x2 © |  |
| STEP 2 | Attach Front Panel (A) to Right Panel (C)using (I) and Washers (J).Hand tighten only. |
| I x2 J x2 © |  |
| STEP 3 | Attach Left Panel (D) to Back Panel (B),Front Panel(A) i Bolts (I) and Washers (J).Hand tighten only. |
| I x4 J x4 © |  |
| STEP 4 | Attach Bottom Panel (E) to Panel(A,B,C, D) using Bolts (I) Washers (J).Hand tighten only. |
| I x6 J x6 © |  |
| STEP 5 | Attach the Top Panel (F) to Back Panel (B) using Bo (G).Fully tighten all bolts using Allen Key. |
| G x2 |  |
| STEP 6 | Please fully tighten hinge support using Wrench(M). |
| K x2L x4M x1 |  |
| STEP 7 | Place cushion (H).Now please enjoy your new Wicker Storage Bench. |
H x1  |  |
Cleaning and Maintenance
We recommend the use of furniture covers to protect the Wicker Stor Benchwhen not in use.
Inspect and tighten allbolts on a regular basis to ensure proper performance and safety.
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| UK | REP |
YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>
| EC | REP |
Affordable. Reliable. Home Improvement.
natural_image
Line drawing of a simple rectangular bed with curved legs and a handle (no text or symbols)| PARTS &HARDWARE LIST | |||
| PART | FIGURE | DESCRIPTION | QTY |
| A |  | Front Panel | 1 |
| B |  | Back Panel | 1 |
| C |  | Right Panel | 1 |
| D |  | Left Panel | 1 |
| E |  | Bottom Panel | 1 |
| F |  | Top Panel | 1 |
| G |  | M4*10 | 2 |
| H |  | Cushion | 1 |
| I |  | M6*30 Bolt | 14 |
| J |  | Washer | 14 |
| K |  | Hinge Support | 2 |
| L |  | Bolt for Hinge Support | 4 |
| M |  | Wrench | 1 |
| N |  | Allen Key | 1 |
| EXTRA PARTS | |||
| PART | FIGURE | DESCRIPTION | QTY |
| G |  | M4*10 | 1 |
| I |  | M6*30 Bolt | 2 |
| J |  | Washer | 2 |
UWAGA:
YH CONSULTING LIMITED. C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
| Przedstawiciel UE |
E-CrossStu GmbH
Mainzer Landstr.69,
60329 Frankfurt nad Menem.
VEVOR
Affordable. Reliable. Home Improvement.
PANCHE PORTAOGGETTI PEFESTERNI
MODELLO: DL-RSB05 / DL-RSB05S
MODELLO: DL-RSB05 / DL-RSB05S
natural_image
Line drawing of a simple rectangular bed with curved legs and a handle (no text or symbols)| PARTS &HARDWARE LIST | |||
| PART | FIGURE | DESCRIPTION | QTY |
| A | | Front Panel | 1 |
| B | | Back Panel | 1 |
| C | | Right Panel | 1 |
| D | | Left Panel | 1 |
| E | | Bottom Panel | 1 |
| F | | Top Panel | 1 |
| G |  | M4*10 | 2 |
| H |  | Cushion | 1 |
| I |  | M6*30 Bolt | 14 |
| J |  | Washer | 14 |
| K | | Hinge Support | 2 |
| L |  | Bolt for Hinge Support | 4 |
| M | | Wrench | 1 |
| N | | Allen Key | 1 |
| EXTRA PARTS | |||
| PART | FIGURE | DESCRIPTION | QTY |
| G | | M4*10 | 1 |
| I | | M6*30 Bolt | 2 |
| J | | Washer | 2 |
ATTENZIONE:
Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA91730
text_image
RAPPRESENTANTE DEL REGNOUNITOYH CONSULTING LIMITED. C/O YH Consult Limited Ufficio 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
Affordable. Reliable. Home Improvement.
BANCOS DE ALMACENAMIENTO PARA EXTERIORES
MODELO: DL-RSB05 / DL-RSB05S
MODELO: DL-RSB05 / DLRSB05S
natural_image
Line drawing of a simple rectangular bed with curved legs and a handle (no text or symbols)| PARTS &HARDWARE LIST | |||
| PART | FIGURE | DESCRIPTION | QTY |
| A | | Front Panel | 1 |
| B |  | Back Panel | 1 |
| C | | Right Panel | 1 |
| D | | Left Panel | 1 |
| E | | Bottom Panel | 1 |
| F | | Top Panel | 1 |
| G | | M4*10 | 2 |
| H |  | Cushion | 1 |
| I | | M6*30 Bolt | 14 |
| J | | Washer | 14 |
| K | | Hinge Support | 2 |
| L |  | Bolt for Hinge Support | 4 |
| M | | Wrench | 1 |
| N | | Allen Key | 1 |
| EXTRA PARTS | |||
| PART | FIGURE | DESCRIPTION | QTY |
| G | | M4*10 | 1 |
| I | | M6*30 Bolt | 2 |
| J | | Washer | 2 |
ATENCIÓN:
YH CONSULTING LIMITADA. A/C YH Consulting limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
Affordable. Reliable. Home Improvement.
FÖRVARINGSBÄNKAR FÖRUTOMHUS
MODELL: DL-RSB05 / DL-RSB05S
MODELL: DL-RSB05 / DL-RSB05S
natural_image
Line drawing of a simple rectangular bed with curved legs and a handle (no text or symbols)| PARTS &HARDWARE LIST | |||
| PART | FIGURE | DESCRIPTION | QTY |
| A | | Front Panel | 1 |
| B | | Back Panel | 1 |
| C | | Right Panel | 1 |
| D | | Left Panel | 1 |
| E | | Bottom Panel | 1 |
| F | | Top Panel | 1 |
| G | | M4*10 | 2 |
| H | | Cushion | 1 |
| I | | M6*30 Bolt | 14 |
| J | | Washer | 14 |
| K | | Hinge Support | 2 |
| L | | Bolt for Hinge Support | 4 |
| M | | Wrench | 1 |
| N | | Allen Key | 1 |
| EXTRA PARTS | |||
| PART | FIGURE | DESCRIPTION | QTY |
| G | | M4*10 | 1 |
| I | | M6*30 Bolt | 2 |
| J | | Washer | 2 |
UPPMÄRKSAMHET:
YH CONSULTING LIMITED. C/O YH Consulting Limited Kontor 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX
| EG-representant |
Affordable. Reliable. Home Improvement.
BUITEN OPBERGBANKEN
MODEL: DL-RSB05 / DL-RSB05S
MODEL: DL-RSB05 / DLRSB05S
natural_image
Line drawing of a rectangular bed with curved legs and a handle, no text or symbols present| PARTS &HARDWARE LIST | |||
| PART | FIGURE | DESCRIPTION | QTY |
| A | | Front Panel | 1 |
| B | | Back Panel | 1 |
| C | | Right Panel | 1 |
| D | | Left Panel | 1 |
| E | | Bottom Panel | 1 |
| F | | Top Panel | 1 |
| G | | M4*10 | 2 |
| H | | Cushion | 1 |
| I | | M6*30 Bolt | 14 |
| J | | Washer | 14 |
| K | | Hinge Support | 2 |
| L | | Bolt for Hinge Support | 4 |
| M | | Wrench | 1 |
| N | | Allen Key | 1 |
| EXTRA PARTS | |||
| PART | FIGURE | DESCRIPTION | QTY |
| G | | M4*10 | 1 |
| I | | M6*30 Bolt | 2 |
| J | | Washer | 2 |
AANDACHT:
YH CONSULTING LIMITED. T.a.v. YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX
| EC | REP |
Affordable. Reliable. Home Improvement.
BANCS DE RANGEMENTEXTÉRIEURS
MODÈLE : DL-RSB05 / DL-RSB05S
MODÈLE : DL-RSB05 / DLRSB05S
natural_image
Line drawing of a simple rectangular bed with curved legs and a handle (no text or symbols)| PARTS &HARDWARE LIST | |||
| PART | FIGURE | DESCRIPTION | QTY |
| A | | Front Panel | 1 |
| B | | Back Panel | 1 |
| C | | Right Panel | 1 |
| D | | Left Panel | 1 |
| E | | Bottom Panel | 1 |
| F | | Top Panel | 1 |
| G | | M4*10 | 2 |
| H | | Cushion | 1 |
| I | | M6*30 Bolt | 14 |
| J | | Washer | 14 |
| K | | Hinge Support | 2 |
| L | | Bolt for Hinge Support | 4 |
| M | | Wrench | 1 |
| N | | Allen Key | 1 |
| EXTRA PARTS | |||
| PART | FIGURE | DESCRIPTION | QTY |
| G |  | M4*10 | 1 |
| I | | M6*30 Bolt | 2 |
| J | | Washer | 2 |
ATTENTION:
YH CONSULTING LIMITED. A/S YH Consulting Limited, bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
| REPRÉSENTANT DE LA CE |
E-CrossStu GmbH
Mainzer Landstr.69,
Affordable. Reliable. Home Improvement.
natural_image
Line drawing of a simple rectangular bed with curved legs and a handle (no text or symbols)| PARTS &HARDWARE LIST | |||
| PART | FIGURE | DESCRIPTION | QTY |
| A | | Front Panel | 1 |
| B | | Back Panel | 1 |
| C | | Right Panel | 1 |
| D | | Left Panel | 1 |
| E | | Bottom Panel | 1 |
| F | | Top Panel | 1 |
| G | | M4*10 | 2 |
| H | | Cushion | 1 |
| I | | M6*30 Bolt | 14 |
| J | | Washer | 14 |
| K | | Hinge Support | 2 |
| L | | Bolt for Hinge Support | 4 |
| M | | Wrench | 1 |
| N | | Allen Key | 1 |
| EXTRA PARTS | |||
| PART | FIGURE | DESCRIPTION | QTY |
| G | | M4*10 | 1 |
| I | | M6*30 Bolt | 2 |
| J | | Washer | 2 |
AUFMERKSAMKEIT:
YH CONSULTING LIMITED. C/O YH Consult limited,
Büro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
| EG-Vertreter |
E-CrossStu GmbH
Mainzer Landstr.69,
60329 Frankfurt am Main.
