BJJ-0710 - Wall mount Vevor - Free user manual and instructions

Find the device manual for free BJJ-0710 Vevor in PDF.

Vevor BJJ-0710 - Wall mount
📄 64 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Vevor BJJ-0710 - page 1
1 / 64
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Background support (stand for backdrop)
Brand Vevor
Model BJJ-0710
Dimensions (L x W x H) 3540 x 540 x 2130 mm
Net weight Approximately 3.05 kg
Material Aluminum and alloy
Intended use Backdrop support for photography, video, events
Package contents Poles, bases, fittings, screws, manual
Assembly required Yes, follow instructions
Usage precautions Use on flat surface, check before use, do not exceed weight capacity
Care and cleaning Clean with a soft cloth, check parts regularly
Safety Wear safety glasses and gloves during assembly; keep children away
Technical support www.vevor.com/support
Warranty Electronic warranty certificate available on Vevor website

Frequently Asked Questions - BJJ-0710 Vevor

How to assemble the Vevor BJJ-0710 stand?
Follow the assembly steps in the manual. Assemble on a flat, hard surface. Wear safety glasses and gloves. Do not assemble if you are tired or under the influence.
What is the maximum weight capacity?
The manual does not specify an exact weight capacity. It is recommended not to overload and check stability before use.
Can this stand be used outdoors?
Yes, but make sure it is placed on a flat, stable surface. Avoid windy conditions that could cause it to tip over.
How to clean the stand?
Use a soft, dry cloth to remove dust. Do not use harsh chemicals. Regularly check that all parts are tight.
Can I use this stand with a green screen or backdrop?
Yes, this stand is designed for backdrops and fabric or paper sets. Ensure the weight of the backdrop does not exceed the recommended capacity.
Is it portable and easy to carry?
With a net weight of approximately 3.05 kg and a dismountable design, it is relatively portable. Store the parts in a suitable carrying bag.
What are the deployed dimensions?
The dimensions are 3540 mm width, 540 mm depth, and 2130 mm height.
Is the stand delivered with a carrying bag?
The manual does not mention a carrying bag. The package contents include the stand parts and the manual.
How to contact Vevor customer service?
Go to www.vevor.com/support for technical support and the electronic warranty certificate.
What is the warranty for this product?
Vevor offers an electronic warranty certificate. Check the website for more details on warranty terms.

User questions about BJJ-0710 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Wall mount in PDF format for free! Find your manual BJJ-0710 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BJJ-0710 by Vevor.

USER MANUAL BJJ-0710 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

BACKDROP STAND

USER MANUAL

MODEL NO.: BJJ-0710

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Backdrop Stand

MODEL NO.: BJJ-0710

Simple line drawing of a rectangular structure with two vertical supports at the bottom (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure to do so may result in serious injury.

ASSEMBLY PRECAUTIONS

  1. Assemble only according to these instructions. Improper assembly can create hazards.
  2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
  3. Keep the assembly area clean and well-lit.
  4. Keep bystanders out of the area during assembly.
  5. Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
  6. The product capabilities apply to properly and completely assembled products only.
  7. Assemble on a flat, level, hard, and smooth surface capable of safely supporting the Backdrop Stand.
  8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

  1. This product is not a toy. Do not allow children to play with or near this item.
  2. Do not exceed weight capacities. Move the product carefully.
  3. Use only on a flat, hard, and smooth surface capable of safely supporting a fully loaded Backdrop Stand.
  4. Use as intended only.
  5. Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

ModelBJJ-0710
Product Dimensions (LxWxH)(mm)3540*540*2130
Net Weight(kg)About 3.05

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

AVevor BJJ-0710 - PACKAGE CONTENTS - 12EVevor BJJ-0710 - PACKAGE CONTENTS - 28
BVevor BJJ-0710 - PACKAGE CONTENTS - 31FVevor BJJ-0710 - PACKAGE CONTENTS - 42
CVevor BJJ-0710 - PACKAGE CONTENTS - 51
DVevor BJJ-0710 - PACKAGE CONTENTS - 61

ASSEMBLY STEPS

STEP 1B*1 C*1 D*1 B C D

Take one piece of B, one piece of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable. Anchor point

Two people place the tripods at a proper distance, use the crossbar assembled in step 1 to locate the two tripods, and put the crossbar on the ground, with both ends of the crossbar at the positioning points (as shown in the figure).

STEP 4Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people place the tripod at a proper distance, install the crossbar assembled in step 1.

STEP 5Tips: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6E*8 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Eight clips are used according to the actual situation.

COMPLETION

Simple line drawing of a rectangular structure with two triangular supports at both ends (no text or symbols)

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangcheng Road 803, Lane 11, Room 1602A-1609, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Take one piece of B, one piece of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable. Anchor point

Two people place the tripods at a suitable distance, use the crossbar assembled in step 1 to position the two tripods, and place the crossbar on the ground with both ends at the positioning points (as shown in the figure).

STEP 4Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people place the tripod at a suitable distance, install the crossbar assembled in step 1.

STEP 5Tips: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people raise the tripod to a suitable height to ensure that both sides are at the same height and the crossbar is horizontal.

STEP 6E*8 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after filling with sand, to ensure the stability of the shelf; eight clips are used according to the actual situation.

COMPLETIONSimple line drawing of a rectangular structure with two triangular supports at both ends (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

YH CONSULTING LIMITED. C/O YH Consulting

Limited Bureau 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC REPRESENTATIVE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

BACKGROUND STAND

USER MANUAL

MODEL NO.: BJJ-0710

Take one piece of B, one piece of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3Anchor point Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable.

Two people put the tripods at a proper distance, use the crossbar assembled in step 1 to locate the two tripods, and put the crossbar on the ground, with both ends of the crossbar at the positioning points (as shown in the figure).

STEP 4Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people put the tripod at a proper distance, install the crossbar assembled in step 1.

STEP 5Tips: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6E*8 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Eight clips are used according to the actual situation.

COMPLETIONSimple line drawing of a rectangular structure with two triangular supports at both ends (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

Vevor BJJ-0710 - MODEL NO.: BJJ-0710 - 7

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

BASE SUPPORT

USER MANUAL

MODEL NO.: BJJ-0710

Take one piece of B, one piece of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable. Anchor point

Two people place the tripods at a proper distance, use the crossbar assembled in step 1 to locate the two tripods, and put the crossbar on the ground, with both ends of the crossbar at the positioning points (as shown in the figure).

STEP 4Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people place the tripod at a proper distance, install the crossbar assembled in step 1.

STEP 5Tips: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6E*8 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Eight clips are used according to the actual situation.

COMPLETION

Simple line drawing of a rectangular structure with two triangular supports at both ends (no text or symbols)

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Representation of the United Kingdom

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

BASE SUPPORT

USER MANUAL

MODEL NUMBER: BJJ-0710

Take one piece of B, one piece of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3Anchor point Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable.

Two people put the tripods at a proper distance, use the cross bar assembled in step 1 to locate the two tripods, and put the cross bar on the ground, with both ends of the cross bar at the positioning points (as shown in the figure).

STEP 4Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people put the tripod at a proper distance, install the crossbar assembled in step 1.

STEP 5Tips: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6E*8 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Eight clips are used according to the actual situation.

FINISH

Simple line drawing of a rectangular structure with two triangular supports at both ends (no text or symbols)

Road, Staines-upon-Thames, Surrey, TW18 4AX

CE Representative

E-CrossStu GmbH

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Take one piece of B, one piece of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable. Anchor point

Two people place the tripods at a proper distance, use the crossbar assembled in step 1 to locate the two tripods, and put the crossbar on the ground, with both ends of the crossbar at the positioning points (as shown in the figure).

STEP 4Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people place the tripod at a proper distance, install the crossbar assembled in step 1.

STEP 5Tips: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6E*8 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Eight clips are used according to the actual situation.

COMPLETIONSimple line drawing of a rectangular structure with two triangular supports at both ends (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP WIEL KIEJ BRYTANII

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

BACKGROUND STAND

USER MANUAL

MODEL NUMBER: BJJ-0710

NEED HELP? CONTACT US!

Take one piece of B, one piece of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3Anchor point. Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable. Anchor point

Two people put the tripods at a proper distance, use the crossbar assembled in step 1 to locate the two tripods, and put the crossbar on the ground, with both ends of the crossbar at the positioning points (as shown in the figure).

STEP 4Tighten the claw screw. Step 1: Assembled crossbar. Tighten the claw screw

After two people put the tripod at a proper distance, install the crossbar assembled in step 1.

STEP 5Tips: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6E*8, F*2. Installation position of sandbag. Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Eight clips are used according to the actual situation.

COMPLETION

Simple line drawing of a rectangular structure with two triangular supports at both ends (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Kantoor 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC-REP

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

BACKGROUND

USER MANUAL

MODEL NO: BJJ-0710

NEED HELP? CONTACT US!

Take one piece of B, one piece of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3Anchor point. Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable. Anchor point

Two people put the tripods at a proper distance, use the cross bar assembled in step 1 to locate the two tripods, and put the cross bar on the ground, with both ends of the cross bar at the positioning points (as shown in the figure).

STEP 4Tighten the claw screw. Step 1: Assembled crossbar. Tighten the claw screw

After two people put the tripod at a proper distance, install the crossbar assembled in step 1.

STEP 5Tips: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6E*8, F*2. Installation position of sandbag. Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Eight clips are used according to the actual situation.

COMPLETIONSimple line drawing of a rectangular structure with two triangular supports at both ends (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : BJJ-0710

Category : Wall mount