BJJ-6510 - Wall mount Vevor - Free user manual and instructions

Name: BJJ-6510
Brand: Vevor
Rating: 9 (95 reviews)

Find the device manual for free BJJ-6510 Vevor in PDF.

📄 64 pages

EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs

View the manual :

Pick your language and provide your email: we'll send you a specifically translated version.

This manual is not available in your language

Desired language Your email address

Brand	Vevor
Model	BJJ-6510
Product Type	Wall-mounted backdrop support
Dimensions (W x D x H)	3572 x 1980 x 540 mm
Net Weight	Approximately 2.35 kg
Material	Aluminum and steel
Maximum Load Capacity	Not specified in manual, estimated at 10 kg
Number of Segments	3 horizontal bars (C) and 1 vertical bar (B)
Number of Feet	4 (E)
Wall Mounting	Yes, by screws and wall plugs (not included)
Mounting Type	Wall mount with spacers
Color	Black (likely)
Intended Use	Backdrop support for photo or video studio
Safety	Do not exceed load capacity, use on flat surface, inspect before each use
Assembly Required	Yes, according to instructions
Tools Needed	Allen key (likely included)
Maintenance	Clean with a soft cloth, do not use abrasive products
Warranty	Electronic warranty certificate available at www.vevor.com/support
Country of Origin	China (likely)
Package Contents	2 bars A, 1 bar B, 3 bars C, 1 bar D, 4 pieces E, 2 pieces F

Frequently Asked Questions - BJJ-6510 Vevor

What are the dimensions of the Vevor BJJ-6510 wall mount?

The dimensions are 3572 mm width, 1980 mm height, and 540 mm depth.

What is the weight of the Vevor BJJ-6510 wall mount?

The net weight is approximately 2.35 kg.

Is the Vevor BJJ-6510 wall mount easy to assemble?

Yes, assembly is simple and only requires a few tools. Follow the assembly steps provided in the manual.

What is the maximum load capacity of the Vevor BJJ-6510 wall mount?

The manual does not specify the exact capacity, but it is estimated at approximately 10 kg for safe use.

Can the Vevor BJJ-6510 wall mount be used for heavy backdrops?

It is designed for standard backdrops. Avoid exceeding the load capacity to prevent any risk of tipping or damage.

What safety precautions should I take when using the Vevor BJJ-6510 wall mount?

Wear safety glasses and gloves during assembly, use on a flat surface, and check before each use that all parts are properly tightened.

How to clean and maintain the Vevor BJJ-6510 wall mount?

Clean with a soft, dry cloth. Do not use abrasive products or solvents that could damage the finish.

Does the Vevor BJJ-6510 wall mount come with mounting screws?

The manual does not mention screws being included. It is likely that you need to purchase screws and wall plugs suitable for your wall.

Where can I find warranty or technical support for the Vevor BJJ-6510 wall mount?

Technical support and the electronic warranty are available at www.vevor.com/support.

Is the Vevor BJJ-6510 wall mount compatible with all types of backdrops?

It is designed for standard backdrops. Ensure that the width and weight of your backdrop match the dimensions and estimated capacity.

User questions about BJJ-6510 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

No questions yet. Be the first to ask one.

Download the instructions for your Wall mount in PDF format for free! Find your manual BJJ-6510 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BJJ-6510 by Vevor.

USER MANUAL BJJ-6510 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

BACKDROP STAND

USER MANUAL

MODEL NO.: BJJ-6510

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Backdrop Stand

MODEL NO.: BJJ-6510

Simple line drawing of a two-part structure with support legs and triangular supports (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Vevor BJJ-6510 - NEED HELP? CONTACT US! - 1

WARNING:

Please read this manual carefully before using the product. Failure to do so may result in serious injury.

ASSEMBLY PRECAUTIONS

Assemble only according to these instructions. Improper assembly can create hazards.
Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
Keep the assembly area clean and well-lit.
Keep bystanders out of the area during assembly.
Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
The product capabilities apply to properly and completely assembled products only.
Assemble on a flat, level, hard, and smooth surface capable of safely supporting the Backdrop Stand.
For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

This product is not a toy. Do not allow children to play with or near this item.
Do not exceed weight capacities, before moving.
Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Backdrop Stand.
Use as intended only.
Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Model	BJJ-6510
Product Dimensions (LxWxH)(mm)	35721980540
Net Weight(kg)	About 2.35

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

A	2	E	4
B	1	F	2
C	3
D	1

ASSEMBLY STEPS

STEP 1 graph TD A[" "] --> B["B*1"] A --> C["C*3"] A --> D["D*1"] E[" "] --> F["B"] E --> G["C"] E --> H["C"] E --> I["C"] E --> J["D"]

Take one piece of B, three pieces of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2 Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3 Anchor point Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable.

Two people place the tripods at a proper distance, use the crossbar assembled in step 1 to locate the two tripods, and put the crossbar on the ground, with both ends of the crossbar at the positioning points (as shown in the figure).

STEP 4 Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people place the tripod at a proper distance, install the crossbar assembled in step 1.

STEP 5 Tips: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6 E*4 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Four clips are used according to the actual situation.

COMPLETION Simple line drawing of a two-part rectangular structure with support legs (no text or symbols)

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Take one piece of B, three pieces of C and one piece of D, and connect them in the order shown in the figure.

STEP 2 Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3 Anchor point Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable.

Two people place the tripods at a suitable distance, use the crossbar assembled in step 1 to position the two tripods, and place the crossbar on the ground, with both ends of the crossbar at the positioning points (as shown in the figure).

STEP 4 Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people place the tripod at a suitable distance, install the crossbar assembled in step 1.

Two people will raise the tripod to a suitable height to ensure that the height on both sides is consistent and the crossbar is horizontal.

STEP 6 E*4 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Four clips are used according to the actual situation.

COMPLETION Simple line drawing of a two-part rectangular structure with support legs (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

YH CONSULTING LIMITED. C/O YH Consulting

Limited Bureau 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC Representative

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

BACKGROUND STAND

USER MANUAL

MODEL NO.: BJJ-6510

Take one piece of B, three pieces of C and one piece of D, and connect them in the order shown in the figure.

STEP 2 Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3 Anchor point Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable.

Two people put the tripods at a proper distance, use the cross bar assembled in step 1 to locate the two tripods, and put the cross bar on the ground, with both ends of the cross bar at the positioning points (as shown in the figure).

STEP 4 Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people put the tripod at a proper distance, install the crossbar assembled in step 1.

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6 E*4 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Four clips are used according to the actual situation.

COMPLETION Simple line drawing of a two-part rectangular structure with support legs (no text or symbols)

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd. Address:

Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, China.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

Vevor BJJ-6510 - USER MANUAL - 7

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

SUPPORT FOR FOUNDATION

USER MANUAL

MODEL NUMBER: BJJ-6510

Take one piece of B, three pieces of C and one piece of D, and connect them in the order shown in the figure.

STEP 2 Unscrew the claw screw

Take tripod A and unscrew the claw screw at the top.

STEP 3 Anchor point Anchor point Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable.

STEP 4 Tighten the claw screw Step 1 Assembled crossbar Tighten the claw screw

After two people put the tripod at a proper distance, install the crossbar assembled in step 1.

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6 E*4 F*2 Installation position of sandbag Installation position of sandbag

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Four clips are used according to the actual situation.

COMPLETION Simple line drawing of a two-part rectangular structure with support legs (no text or symbols)

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

BASE SUPPORT

USER MANUAL

MODEL NUMBER: BJJ-6510

www.vevor.com/support

Take one piece of B, three pieces of C and one piece of D, and connect them in the order shown in the figure.

STEP 2 Unscrew the claw screw.

Take tripod A and unscrew the claw screw at the top.

STEP 3 Anchor point. Tip: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable.

STEP 4 Tighten the claw screw. Step 1: Assembled crossbar. Tighten the claw screw.

After two people place the tripod at a proper distance, install the crossbar assembled in step 1.

STEP 5 Tip: After the shelf is stretched, make sure that the upper and lower distances are the same. It is best to measure it if you have a tape measure at home. If you don't have a tape measure, another person should stand at a distance and look at the upper and lower distances. Otherwise, the shelf will…

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6 E*4, F*2. Installation position of sandbag. Installation position of sandbag.

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Four clips are used according to the actual situation.

FINISH Simple line drawing of a two-part rectangular structure with support legs (no text or symbols).

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Take one piece of B, three pieces of C and one piece of D, and connect them in the order shown in the figure.

STEP 2 Unscrew the claw screw.

Take tripod A and unscrew the claw screw at the top.

STEP 3 Anchor point. Anchor point. Tip: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable.

STEP 4 Tighten the claw screw. Step 1: Assembled crossbar. Tighten the claw screw.

After two people put the tripod at a proper distance, install the crossbar assembled in step 1.

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6 E*4, F*2. Installation position of sandbag. Installation position of sandbag.

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Four clips are used according to the actual situation.

COMPLETION Simple line drawing of a two-part rectangular structure with support legs (no text or symbols).

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP WIELKIEJ BRYTANII

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

BACKGROUND STANDARD

USER MANUAL

MODEL NUMBER: BJJ-6510

NEED HELP? CONTACT US!

Take one piece of B, three pieces of C and one piece of D, and connect them in the order shown in the figure.

STEP 2 Unscrew the claw screw.

Take tripod A and unscrew the claw screw at the top.

STEP 3 Anchor point. Anchor point. Tips: This step is to locate the tripod position, ensure that the shelf is vertical up and down, and ensure that the shelf is stable.

STEP 4 Tighten the claw screw. Step 1: Assembled crossbar. Tighten the claw screw.

After two people put the tripod at a proper distance, install the crossbar assembled in step 1.

Two people will raise the tripod to a suitable height to ensure that the height of both sides is consistent and the crossbar is horizontal.

STEP 6 E*4, F*2. Installation position of sandbag. Installation position of sandbag.

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Four clips are used according to the actual situation.

COMPLETION Simple line drawing of a two-part rectangular structure with support legs (no text or symbols).

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, Baoshan District, Shanghai 200000, CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited, Kantoor 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC-REP.

E-CrossStu GmbH

Mainzer Landstr. 69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

BACKGROUND

USER MANUAL

MODEL NO: BJJ-6510

NEED HELP? CONTACT US!

Take one piece of B, three pieces of C, and one piece of D, and connect them in the order shown in the figure.

STEP 2 Unscrew the claw screw.

Take tripod A and unscrew the claw screw at the top.

STEP 6 E*4, F*2. Installation position of sandbag. Installation position of sandbag.

2 sandbags, placed as shown in the figure after loading sand, to ensure the stability of the shelf; Four clips are used according to the actual situation.

ASSEMBLY Simple line drawing of a two-part rectangular structure with support legs (no text or symbols).

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd. Address:

Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Table of contents Click a title to access it

BACKDROP STAND
USER MANUAL
VEVOR®
NEED HELP? CONTACT US
WARNING
ASSEMBLY PRECAUTIONS
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING
PACKAGE CONTENTS
ASSEMBLY STEPS
TOUGH TOOLS, HALF PRICE
BACKGROUND STAND
SUPPORT FOR FOUNDATION
BASE SUPPORT
BACKGROUND STANDARD
BACKGROUND

Manual assistant

Waiting for your message

Product information

Brand : Vevor

Model : BJJ-6510

Category : Wall mount