XMS-3 - Vehicle Accessories Vevor - Free user manual and instructions

Product Type	Wheel Chock and Tie-Down Kit
Brand	Vevor
Model	XMS-3
Maximum Load Capacity	2500 daN
Net Weight	7.6 kg
Gross Weight	8.1 kg
Main Material	Steel and Polyester
Main Functions	Wheel chocking and tie-down with ratchet strap
Strap Type	Adjustable Ratchet Strap
Recommended Use	Vehicles, trailers, RVs
Safety	Do not overload, engine off, brake set
Maintenance	Clean with a damp cloth, check for wear
Storage	In a dry and clean place
Spare Parts	Strap, ratchet, wheel chock
Repairability	Strap replacement possible
Warranty	Electronic warranty certificate available online
Provided Documents	User manual (64 pages)
Importer	Sanven Technology Ltd. (United States), YH Consulting Ltd. (United Kingdom)

Frequently Asked Questions - XMS-3 Vevor

How to properly use the XMS-3 wheel chock?

Place the chock against the tire, make sure the engine is off and the parking brake is engaged. Use the ratchet strap to secure the wheel. Follow the manual steps: thread the strap into the spool, remove slack, then ratchet until tight.

What is the maximum load capacity of this model?

The maximum load capacity is 2500 daN, approximately 2500 kg, as indicated in the specifications table.

Can I use the XMS-3 to secure cargo?

Yes, the kit is designed for wheel chocking and tie-down. Respect the maximum capacity and properly fasten the strap. For other uses, check compatibility.

How to maintain the ratchet strap?

After use, clean the strap with a damp cloth to remove dirt. Regularly check the strap for wear and the ratchet mechanism for proper function. Replace if damaged.

Is the product suitable for all tire types?

Yes, it fits car, trailer, and RV tires. Ensure proper tire pressure for good chocking performance.

How to unlock the ratchet strap?

Pull and hold the release tab to disengage the ratchet function. Open the ratchet flat, remove the strap by pulling gently, then close.

Where can I get technical support or warranty?

Visit www.vevor.com/support for technical support and the electronic warranty certificate.

Can I replace worn parts?

Yes, straps and ratchets are replaceable. Refer to the manual for spare parts and contact Vevor support if needed.

What safety precautions should I take?

Do not overload the strap, turn off the engine, set the parking brake. Wear appropriate clothing, avoid jewelry and loose hair. Keep the work area clean.

How to store the tie-down kit when not in use?

Store the kit in a dry and clean place, away from moisture and UV rays to extend its lifespan.

USER MANUAL XMS-3 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

WHEEL CHOCK TIE DOWN KIT

MODEL: XMS-1/ XMS-2/ XMS-3/ XMS-5

We continue to be committed to provide you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us, where we are actually saving half in comparison with the top major brands.

VEVOR®

Wheel Chock Tie Down Kit User Manual

MODEL: XMS-1/ XMS-2/ XMS-3/ XMS-5

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any hardware or software updates on our product.

Safety & Warning

• Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury, or damage to valuable property.
• Do not overload the chock tie. Never exceed the maximum weight capacity of the parameter table.
• Make sure the vehicle's engine is OFF, with parking brake set, before touching tires or other car parts.
• The performance of the Wheel Stabilizer is dependent on proper trailer tire pressures. Check tire pressures frequently for safety, good tire wear and good chock performance.
• Adhere to all Department of Transportation (D.O.T.) requirements when using this product.
• Use common sense when working. Stay alert and concentrate when setting up and using this product. Never work while under the influence of alcohol, drugs or medications.
• While assembling and using this product keep work area clean and well lighted. Keep spectators and children out of the work area.
• Dress appropriately. Never wear loose fitting clothing or jewelry when working. Contain long hair, and keep hair, clothing and gloves away from moving parts.

Specifications

Model Series	XMS-1	XMS-2	XMS-3	XMS-5
Maximum Load Capacity (daN)	2500	2500	2500	1000
Net Weight (kg)	9.1	8.4	7.6	4.2
Gross Weight (kg)	9.6	8.9	8.1	4.4

Drawing of the Product

XMS-1	XMS-2	XMS-3	XMS-5

Ratchet belt instruction

A. Ratchet instructions

STEP 1	From bottom, thread webbing though slot in center spool of closed ratchet.
STEP 2	Pull webbing through, removing the slack.
STEP 3	Start ratcheting--raising and lowering handle
STEP 4	Finish ratcheting with lowered handle.

B. Release instructions

	Pull&hold release tab(to override ratcheting function).
STEP 2	Open ratchet until it is completely open and flat.
STEP 3	Remove webbing from ratchet by gently pulling out.
STEP 4	Pull and hold release tab to clos ratchet.

Usage scenario

ATV Transport

Road Rescue

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

www.vevor.com/support

	XMS-2 XMS-3XMS-1		XMS-5

B. Publication instructions

ATV transport

Road rescue

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN.

Imported to Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Bureau 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

	XMS-2 XMS-3	XMS-1	XMS-5

ATV Transport

Road Rescue

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

XMS-1 XMS-3XMS-2			XMS-5

ATV Transport

Roadside Assistance

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

XMS-1 XMS-3XMS-2			XMS-5

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

NEED HELP? CONTACT US!

www.vevor.com/support

	XMS-2 XMS-3XMS-1		XMS-5

Quad transport

Road rescue

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshan District, Shanghai 200000 CN.

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, California 91730

REP WIEL KIEJ BRYTANII

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

	XMS-2 XMS-3XMS-1		XMS-5

ATV transport

Road rescue

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

www.vevor.com/support

	XMS-2 XMS-3XMS-1		XMS-5

ATV Transport

Road Rescue

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE