GT-101H - Grooming set Vevor - Free user manual and instructions

USER MANUAL GT-101H Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

PET GROOMING TABLE

MODEL:GT-101H

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODEL:GT-101H

Technical line drawing of a mechanical lift or lift device with vertical supports and a central cylindrical component (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so can re serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol drugs or medication.
6. Product capabilities apply to properly and completely assembled product only.
7. Assemble on a flat, level, hard and smooth surface capable of safe supporting a fully loaded feeder.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

Use precautions

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT, STAND OR cLIMB ON THIS ITEM.
2. This product is not a toy nor a toy chest. Do not allow children with this item. Use as intended only and Need to supervise the child understand step &open rules of feeder finally.
3. Empty, close, and lock feeder before moving.
4. Use only on a flat, level, hard and smooth surface capable of sa supporting a fully loaded feeder.

SAVE THESE INSTRUCTIONS

Model	GT-101H
Table Size(inch/mm)	42.5*24/ 1416.7*609.6
Height Adjustment Range(inch/mm)	22.13-39.68 / 562-1008
Dynamic Load (lbs / kg)	220 / 99.8
Static Load (lbs / kg)	400 / 181.4

Product Introduction

M8×40mm-4pcs B M10×60mm-2pcs C M10×35mm-1pcs D M8×30mm-1pcs E M12×200mm-4pcs F G M12×180mm-1pcs I

Technical line drawings of two identical mechanical assembly setups with vertical supports and a central cylindrical component (no text or symbols)

① Frame equilibrium frame ② Support frame ③ Chassis ④ Hydraulic pump ⑤ Hydraulic pump frame ⑥ Hydraulic pump frame 2 ⑦ Down equalizer ⑧ Up equalizer ⑨ Up and Down strut ⑩ Table frame

Product Installation

Step 1

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating rotation or assembly.

Step 2

Step 2 B ②

Step 3

Step 3 ③ C

Do not twist the screw sotight, or it cannot be turned

Step 4

ep 4 4

Please remove the foam wrapped on the hydraulic pump before installation

Step 5 E D 6 5 ① Tight ening the screw after step 5

Step 6

Step 6 ⑦ F

(1) Tightening the screw after step 6

Step 7

8

! Tight ening the screw after step 7

F G

Step 8

step 8 9

Technical line drawing of a mechanical lifting device with labeled component 'F' (no text or symbols beyond label)

Step 9

Step 9 10 I

Step 10

graph TD
    A["Top Track"] --> B["Vertical Rod"]
    B --> C["Horizontal Rod"]
    C --> D["Vertical Rod"]
    D --> E["Horizontal Rod"]
    E --> F["Bottom Platform"]
    style A fill:#f9f,stroke:#333
    style F fill:#bbf,stroke:#333

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with support columns and a central cylindrical component (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Step 3 ③ C

Do not twist the screw sotight, or it cannot be turned

Step 4

ep 4 4

Please remove the foam wrapped on the hydraulic pump before installation

Step 5 E D 6 ⑤ ① Tight ening the screw after step 5

Step 6

Step 6 ⑦ F

① Tightening the screw after step 6

Step 7

8

! Tight ening the screw after step 7

F G

Step 8

step 8 9

Technical line drawing of a mechanical lifting device with labeled component 'F' (no text or symbols beyond label)

Step 9

Step 9 10 I

Step 10

graph TD
    A["Top Track"] --> B["Left Rod"]
    B --> C["Right Rod"]
    C --> D["Left Rod"]
    D --> E["Right Rod"]
    E --> F["Left Rod"]
    F --> G["Right Rod"]
    G --> H["Bottom Panel"]
    style A fill:#f9f,stroke:#333
    style H fill:#bbf,stroke:#333

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australie

A/S YH Consulting Limited Bureau 147, Centurion

Maison, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with support columns and a central cylindrical component (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating rotation or assembly.

Step 2

Step 2 B ②

Step 3

Step 3 ③ C

Do not twist the screw sotight, or it cannot be turned

Step 4

ep 4 ④

Please remove the foam wrapped on the hydraulic pump before installation

Step 5 E D 6 ⑤ ① Tight ening the screw after step 5

Step 6

Step 6 ⑦ F

① Tightening the screw after step 6

Step 7

8

! Tight ening the screw after step 7

F G

Step 8

step 8 9

Technical line drawing of a mechanical lifting device with labeled component 'F' (no text or symbols beyond label)

Step 9

Step 9 10 I

Step 10

graph TD
    A["Top Track"] --> B["Left Rod"]
    B --> C["Right Rod"]
    C --> D["Left Rod"]
    D --> E["Right Rod"]
    E --> F["Left Rod"]
    F --> G["Right Rod"]
    G --> H["Bottom Panel"]
    style A fill:#f9f,stroke:#333
    style H fill:#bbf,stroke:#333

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Nach AUS importiert: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Ort, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited Office 147, Centurion

Haus, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with support columns and a central cylindrical component (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating rotation or assembly.

Step 2

Step 2 B ②

Step 3

Step 3 ③ C

Do not twist the screw sotight, or it cannot be turned

Step 4

ep 4 4

Please remove the foam wrapped on the hydraulic pump before installation

Step 5 E D 6 ⑤ ① Tight ening the screw after step 5

Step 6

Step 6 ⑦ F

① Tightening the screw after step 6

Step 7

8

(1) Tightening the screw after step 7

F G

Step 8

step 8 9

Technical line drawing of a mechanical lifting device with labeled component 'F' (no text or symbols beyond label)

Step 9

Step 9 10 I

Step 10

graph TD
    A["Top Track"] --> B["Left Rod"]
    B --> C["Right Rod"]
    C --> D["Left Rod"]
    D --> E["Right Rod"]
    E --> F["Left Rod"]
    F --> G["Right Rod"]
    G --> H["Bottom Panel"]
    style A fill:#f9f,stroke:#333
    style H fill:#bbf,stroke:#333

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

C/O YH Consulting Limited Ufficio 147, Centurion

Casa, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with a cylindrical component and metal frame structure (no text or symbols)

Step 3 ③ C

Do not twist the screw sotight, or it cannot be turned

Step 4

ep 4 ④

Please remove the foam wrapped on the hydraulic pump before installation

Step 5 E D 6 ⑤ ① Tight ening the screw after step 5

Step 6

Step 6 ⑦ F

① Tightening the screw after step 6

Step 7

8

! Tight ening the screw after step 7

F G

Step 8

step 8 9

Technical line drawing of a mechanical lifting device with labeled component 'F' (no text or symbols beyond label)

Step 9

Step 9 10 I

Step 10

graph TD
    A["Top Track"] --> B["Left Rod"]
    B --> C["Right Rod"]
    C --> D["Left Rod"]
    D --> E["Right Rod"]
    E --> F["Left Rod"]
    F --> G["Right Rod"]
    G --> H["Bottom Panel"]
    style A fill:#f9f,stroke:#333
    style H fill:#bbf,stroke:#333

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importado a Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Casa, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE