CBGHD-60 - Grill plate Vollrath - Free user manual and instructions

Brand	Vollrath
Model	CBGHD-60
Product Type	Professional Gas Grill Plate
Usage	Heavy duty (commercial food service)
Width	152.4 cm (60 in)
Power Source	Natural gas (convertible to propane)
Heat Type	Radiant or lava stone
Main Material	Stainless steel
Grates	Adjustable angle grates
Drip Tray	Removable tray for grease and oil
Legs	4 adjustable legs, minimum height 10 cm (4 in)
Required Rear Clearance	Minimum 15 cm (6 in)
Max Gas Pressure	½ psi (35.5 cm W.C.)
Ignition	Manual pilot lights
Cleaning	Daily: brush hot grates, empty drip tray; do not use steel wool or soap on cooking surface
Preventive Maintenance	Annual inspection by a qualified technician
Warranty	Vollrath warranty (see official website)
Spare Parts	Available at Vollrath.com

Frequently Asked Questions - CBGHD-60 Vollrath

How to install the CBGHD-60 appliance?

Installation must be carried out by a qualified installer in accordance with local codes. A minimum clearance of 15 cm (6 in) is required at the rear. Legs of 10 cm (4 in) are mandatory for ventilation. Connect the gas with the supplied regulator, respecting the maximum pressure of ½ psi.

How to convert the appliance from natural gas to propane?

Conversion must be performed by a qualified technician. Use the included conversion kit. Follow the kit instructions and refer to the International Fuel Gas Code for the correct orifice diameter.

How to clean the grill plate?

Clean daily: scrub hot grates (300 °F/148 °C) with a grill brush. Do not use steel wool or soap on the cooking surface. Empty and clean the drip tray. Apply a thin film of food-grade oil to prevent corrosion.

What to do in case of gas odor?

Immediately close the gas supply valve, ventilate the area and do not use any electrical switches. Do not attempt to light the burner. Call a qualified maintenance technician.

How to light the pilot light?

Wait 5 minutes after an outage to dissipate gas. Hold a flame source above the desired burner and gently turn the pilot adjustment screw counterclockwise to adjust the flame. Close the panel after lighting.

How to adjust the pilot light intensity?

The pilot must ignite the main burner within 4 seconds. Use a flathead screwdriver to turn the slotted brass screw: clockwise to decrease, counterclockwise to increase.

How often should the drip tray be emptied?

Empty the drip tray periodically to avoid overflow. Check it often and add water if necessary to reduce flare-ups.

How to replace the lava stone?

Turn the stones periodically. Replace them when the surface is no longer porous. Do not use the appliance with a worn griddle plate, this reduces performance and increases the risk of flare-ups.

Can the appliance be used without the legs?

No. Using without the 10 cm (4 in) legs may cause overheating and fire. The legs provide necessary ventilation for safe operation.

Where to find spare parts for model CBGHD-60?

Spare parts are available on the official website Vollrath.com. Contact Vollrath technical service for any repairs; never attempt to repair the appliance yourself.

USER MANUAL CBGHD-60 Vollrath

Medium-DutyandHeavy-DutyGasCharbroilers

ThankyouforpurchasingthisVollrathequipment.Beforeoperatingthe equipment,readandfamiliarizeyourselfwiththefollowingoperating andsafetyinstructions.SAVETHESEINSTRUCTIONSFORFUTURE REFERENCE.Savetheoriginalboxandpackaging.Usethepackagingto shiptheequipmentifrepairsareneeded.

SAFETYPRECAUTIONS

Toensuresafeoperation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Pleaseread carefully.

WARNING

Warningisusedtoindicatethepresenceofahazardthatwillorcan causeseverepersonalinjuryordeath.

CAUTION

Cautionisusedtoindicatethepresenceofahazardthatwillorcan causeminorormajorpersonalinjuryifthecautionisignored.

NOTICE: Notice is used to note information that is important but not hazard-related.

Toreduceriskofinjuryordamagetotheequipment:

• Cleantheequipmentpertheinstructionsinthismanual.
• Donotstoreorusegasolineorotherflammablevaporsorliquidsin thevicinityofthisoranyotherequipment.
• Keeptheequipmentareafreeandclearofcombustibles.
• Donotobstructtheflowofcombustionandventilationair. The back of the equipment must have a minimum of 6" of space.
• Useasoftclothdampenedwithwarm,soapywatertocleanthe controlsandthesidesoftheequipment.

NOTICE: Donotcleanthegriddleplatesurface with soapywater. Soapywater will corrode the griddles surface.

• Allowwhotequipmentcoolbeforecleaningormoving.
• Useequipmentonaflat, levelpositiononly.
  •Donotoperateunattended.

WARNING

Fire, Injury, DeathHazard Correct precautions, procedures, and regulations for usage must be followed. Operation and safety training is necessary for all users of this equipment.

FUNCTIONANDPURPOSE

This equipment is intended to be used for charter broiling food and commercial food service operations only. It is not intended for household, industrial, or laboratory use.

MediumDuty

HeavyDuty

Conforms to ANSI STD Z83.11-2016 Certified to CSA STD 1.8-2016

Conforms to NSF/ANSI STD 4

Item/ModelNumberDescription

CBGMD-12Medium-Duty,Radiant,12"

CBGMD-24Medium-Duty,Radiant,24"

CBGMD-36Medium-Duty,Radiant,36"

CBGMD-48Medium-Duty,Radiant,48"

CBGMD-60Medium-Duty,Radiant,60"

CBGHD-18Heavy-Duty,Radiant,18"

CBGHD-24Heavy-Duty,Radiant,24"

CBGHD-36Heavy-Duty,Radiant,36"

CBGHD-48Heavy-Duty,Radiant,48"

CBGHD-60Heavy-Duty,Radiant,60"

CBGHD-72Heavy-Duty,Radiant,72"

CLEARANCEANDENVIRONMENTREQUIREMENTS

• Mustbeinstalledadjacenttonon-combustiblesurfacesonly, witha minimumspacingof6"onthebackoftheequipment.
• Adequateclearancemustbemaintainedtoallowforproper ventilationandservicing.4"legsmustbeinstalledtoallowairflow.

Register your product at www.Vollrath.com/registration and become eligible to win a free 10" Vollrath Tribute® frypan.

INSTALLATION

WARNING

Improperinstallation, adjustment, alteration, serviceor maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.

WARNING

Fire, Injury, Death Hazard This equipment must be installed by a qualified installer in accordance with all federal, state, and local codes. Failure to install this equipment properly can result in injury or death.

WARNING

FireHazard Donotinstallorusewithout4"legs.Useofthisequipment withoutlegscancausetheappliancetooverheatandcause afire.

CAUTION

Anyloosedirtormetalparticlesthatareallowedtoenterthegas linesonthisappliancewilldamagethevalveandaffectits operation. Wheninstallingthisappliance,allpipeandfittingsmust befreefromanyinternalcontaminates.Itisrecommendedthata sedimenttrapbeinstalledin-linebeforetheregulator.

ApplicableCodesandStandards

UnitedStates

Vollrathrecommendsthatallcommercialcookingequipmentbeprovided withaventilationsystemincompliancewithNFPA96:

• Cookingequipmentthatusesorproducesgrease(e.g.fryer,griddle), mustbeprovidedwithhoodsthataresignedtocapturegreaseand providefireprotection.
• Equipment must be installed in accordance with the requirements and approval of the AHJ "Authority Having Jurisdiction."

NOTICE: Postinstructionstobefollowedintheeventtheusersmells gas. Consultyourlocalgassupplierfortheseinstructionsand posttheminaprominentlocation.

NOTICE: The installation of this equipment must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, International Fuel Gas Code, ANSIZ223.1/NFPA54, or the Natural Gas and Propanel Installation Code, CSAB149.1, as applicable.

InstallandLeveltheLegs

Ensure the equipment is level in all directions. Begin by tightening each leg securely. Then, as needed at each corner, rotate the adjustable foot.

GasPiping

• Gaspiping must be sized to ensure sufficient pressure and flow to meet the full-rated gas input of the equipment.
• Connectiontoanexistingsystemrequiresthattheexistingsystemhave capacityequaltoorgreaterthanthefull-ratedgasinputofthe equipment.
• Jointcompound(pipedope)shouldbeusedsparinglyandonlyonthe malethreadsofthepipejoints.Suchcompoundsmustberesistantto theactionofliquidpropane(LP)gases.

PressureRegulator

NOTICE: All commercial cooking equipment must have a pressure regulator on the incomingserviceline for safe and efficient operation.

NOTICE: Priortoconnectingtheregulator, checktheincomingline pressure. Theregulatorcanonlywithstandamaximum pressure of 1/2 PSI (14 WC). If the line pressure is beyond this limit, astep-downregulatorbeforetheregulatorprovidedwill berequired.

NOTICE: The appliance and its individual shutoff valvemust be disconnected from the gassupply pipingsystem during any pressure testing of that system test pressures in excess of 1/2 psi (3.5 kPa).

NOTICE: The appliance must be isolated from the gassupply piping system by closing its individual manual shutoff valve during any pressure testing of the gassupply piping system at least pressure equal to less than 1/2 psi (3.5 kPa)

• Thearrowforgedintothebottomoftheregulatorbodyshowsthegas flowdirection,andshouldpointdownstreamtotheequipment.
• Theregulatorprovidedwiththisequipmentisconfiguredforusewith naturalgas.FollowingtheinstructionsintheLPConversionKit,itcan bereconfiguredforusewithLPgas.
• The equipment comes fitted with a ^3/4 "N.P.T. male adapter for connection to the pressureregulator.
• Check the pressure of the incoming gas line. Theregulator can withstand maximum pressure of 14 ^o WC (½ PSI). If the line pressure is beyond this limit, a step-down regulator will be required.

RegulatorConnection

ATogassupplywiththeinstallationofB,C,andDinavertical orientationasshowntoprovidefordebriscapture.

BTeeESuppliedRegulator

CNipple(anylength)FVent

DCap

OrificeSizing

NOTICE: Refertothe International Fuel Gas Code for proper orifice sizing.

•Installerisresponsibleforcorrectorificesizing.
•Theorificesizeismarkedontheorifice/spud.
•Equipmentismanufacturedfor1035BTUpercubicfootheatvalueof naturalgas.

GasConversion

• Conversion from natural gas to liquid propane (LP) or vice versa must be performed by a qualified technician or service agent per the International Fuel Gas Code.
• Refertotheconversionkitinstructionsincludedwiththisequipment.

ManualShut-OffValve

Amanualshutoffvalveshouldbeinstalledinanaccessiblelocation within6ft.(1.8m)oftheequipment.

TesttheEquipment

CheckforGasLeaks

NOTICE: Matches, candle flame, or any other potential source of ignitions shall not be used for this purpose.

1. Rotatethegascontrolknobsforthemainburner(s)totheOFF position.
2. Removethegascontrolknob(s).
3. Usea5/16"nutdrivertoremovethe4screwssecuringthefront panel. Removethefrontpaneltoaccessthepilotburnercontrol valve(s).
4. Locatethepilotburnercontrolvalvesforeachpilotlightandturn themOFFbyturningthesmallforward-facingscrewclockwiseuntiltight.
5. Connect the equipment to the gassupply.
6. Applysoapywatertoeachconnection.
7. TurnONthemainsupplyvalve.
8. Lookforbubblesattheconnections.
9. Tightentheconnectionsasneeded.

LightthePilotBurners

1. Wait5 minutestoallowanygastodissipate.
2. Tolightthepilotburners, holdaflamesourceoverthedesiredpilot burnerwhileslowlyturningitscontrolvalvescrew counterclockwise, adjustingtheflametothedesiredintensity. Repeatforallpilotburners.

TesttheMainBurners

Afterlightingallofthepilotburners,ensurethateachmainburner functionscorrectly.

Afterthelightingthepilots, themainburnerscanbeignitedbypushing andturningthecontrolknobfromthe "off" positiontothedesired setting. Visuallycheckthatthepilotlightignitesthemainburner.

Themainburnerscanbeextinguishedbyturningthecontrolknobback tothe"off"position. Thepilotlightscanbeextinguishedbyshuttingoff thegassupplyattheshut-offvalveinstalledonthegasline.

AGrillGrates.Anglecanbeadjusted.

BGasControlKnob. Used to adjust the temperature of the grilling surface.

CDripTray.Collectsgreaseandoil.Thistraycanberemovedfor cleaning.Itisrecommendedtohaveathinlayerofwaterinthe driptraytoreduceflare-upsandsmoking,whilestillallowing plentyofvolumefordrippings.

DPilotLightAccessHole.Allowsaccesstothepilotlight.

EAdjustableFoot. Used to adjust the level of the equipment.

FLeg.Supportstheequipment.

BEFOREFIRSTUSE

SetupForLavaRockorRadiantHeat

ALavaRock. Helpstodeliverevenheatingacrosstheentire surface, and also servetocollectdrippingsandtoprovidesome smokeflavoringtothefood. Should bereplaced when they are nolongerporous.

BWaffleGrate(s).Usedwiththelavarocksetup.

CLavaRockCover(s).Usedwiththelavarocksetup. NOTICE:Usedforheavydutymodelsonlytoreplaceheavy dutyradiants.

NOTICE: Lavarockkitscanbepurchasedseparatelyasan accessory.

DRadiantCover(s). Usedaloneintheradiantsetuptoprotectthe burner(s) and to help distribute the heat from the burner(s). NOTICE: Can be left in place formed medium duty models.

ConverttoRadiantHeatConverttoLavaRock

1. Removethelavarockandsave forfuturereuse.
2. Removethewafflegrate(s) and saveforfuturereuseifstill sufficientlyporous; otherwise, discard.
3. Removethelavarockcover(s) and save for future reuse.

4. Placetheradiantcover(s) over theburnertube(s).

5. Removetheradiantcover(s) and saveforfuturereuse.

6. Placethelavarockcover(s) over theburnertube(s).
7. Setthewafflegrate(s) into place.
8. Setthelavarockontothewaffle grate(s) and spread out evenly.

Burn-IntheEquipment

1. Rotatethegascontrolknob(s)tothemaximumsetting.
2. Allow char broilerto heat and burn-infor approximately 30 minutes.
   NOTICE: You may not notice smoking during this initial burn-in; this is normal.
3. RotatethegascontrolknobstoOFF.

SeasoningGrillGrates

1. Allow the charbroilertocoolorheattoawarming temperature of approximately 200°F.
2. Rubcookingoil, shortening, beefsuet, orthelikeonthecharbroiler grateswithacleancloth.
3. Heatthecharbroilertomediumhighandallowittooperatefor approximately 30 minutes.
4. Adjust the burner dial(s) to the lowest setting and allow the charbroilertocoolandstabilize atalowheat.
5. Remove any excess soil and wipe clean.
   6.Repeatheprocess;oil,heatfor30minutes,cool,andwipeclean.

OPERATION

WARNING

Fire, DeathHazard Ifyousmellgasfollowtheinstructionsprovidedbythegas supplier. Donottouchanyelectricalswitches;donottrytolightthe burner;donotuseatelephoneincloseproximity.

CAUTION

BurnHazard Hotsurfacesandfoodcanburnskin.Allowthehotsurfacesto coolbeforehandling.Donotdroporspillwaterontothe cookingsurfaceasitcansprayorsplatter.

TIP:Setthegrillgratesatanangle.Thiswillenableliquidstorundown thegratesandintothedriptray,whichwillreduceflare-ups.

1. Verifythedriptrayisinplace.Addwatertothedriptray.Water vaporrisingfromthedriptrayandthroughthecombustionchamber willhelptoreduceflare-ups.
2. Lightyoilandwipethegratescleantoremoveanycontaminants that may have accumulatedorhaveseepedfromthegrilland/or perimetersincelastuseandtoensureacleannon-stickcooking surface.
3. Rotatethegascontrolknobstoignitethemainburner(s).Adjustthe knob(s)tothedesiredheatlevel.
   4.Preheatthegrillgratesfor15minutes.
   5.Cookthefood
4. Emptythedriptrayperiodicallytoensureitdoesnotoverflow. Checkthedriptrayfrequentlyandaddwaterasnecessary.
5. Donotallowoilgreasetobuilduponthegrillgrates. Wipedown thegrillgratestopreventcarbonbuild-up, which could affect the performance of the grill.

AdjustingthePilotLight

Fromtimetotimethepilotlightintensitymayneedtobeadjustedto properlyignitethemainburners.

1. With the pilot light ignited, use a flat head screw drivert to turn the exposed slotted brass screw. Turn the screw clock wisetodecrease intensity and counter-clock wisetoincrease intensity.
2. Determinetheproperintensitytoignitetheburnerflames. Burners shouldignitefrompilotinunder4seconds.

CLEANING

CAUTION

BurnHazard

Hotsurfacesandfoodcanburnskin.Allowthehotsurfacesto coolbeforehandling.Donotdroporspillwaterontothe cookingsurfaceasitcansprayorsplatter.

Topreventflare-upsandtomaintaintheappearanceandincreasethe servicelife,cleanyourequirementdaily.

NOTICE: Donotcleantheequipmentwithsteelwool.

NOTICE: Donotusecleaningchemicalsorsoapsasthesecanbe absorbed by the cookingsurface and affect the flavor of the food. If necessary, use only clean water, oil, and/or a food graded greaser for the cleaning process.

NOTICE: Topreventcorrosion, donotallowthegrate(s) to remain unseasonedor without a thin coating of cooking oil.

Daily

1. While the grates are hot (approximately 300° F), use a grill brush or grill brick to scrub them clean.
2. Inspectthegratesanddetermineiftheyneedtobere-seasoned. If theygratesdonotneedseasoning,applyathincoatofcookingoilto thegratestopreventcorrosion.
3. Allow the charbroilertocool.
4. Remove, empty, and cleanthedriptray.
   5.Cleantheexterioroftheunit.

WeeklyOrMoreOftenifNeeded

RadiantBars

1. Removetheradiantbars.
2. Inspectforwear.lfbarsareworn, orderreplacements.

NOTICE: Donotoperatethecharbroiler with worn radiant bars. This will reduce performance of the charbroiler and may cause flare-ups.

1. Washtheradiantbarsinasolutionofwarm,soapywater.

2. Thoroughlydrytheradiantbars.

3. Placetheradiantbarsinthecharbroiler.

LavaRock

1. Flipoverthelavarocks. This will enable any greasethath as accumulated on the top of the rock to burn off.
2. Inspect the waffle grate for wear. If the grate is worn, order a replacement.
   NOTICE: Donotoperatethecharbroilerwithaworngrate. This will reduce the performance of the charbroiler and may cause flare-ups.
3. Inspecttherocksforwear. Vollrath recommends replacing therocks when the surface is no longer porous. Eventually, ash and contaminants will plug the holes and the lavarock will no longer capture the drippings and convert them to smoke. Instead, the drippings will runoff and risk of flare-up.

PREVENTATIVE MAINTENANCE

WARNING

Fire, Injury, Death Hazard

Contactaqualifiedtechnicianorserviceagentforany adjustments, maintenance, or repairs. This appliance is not userserviceable.

Aqualifiedservicecompanyshouldchecktheunitforsafeandefficient operationonanannualbasis.Contactthefactoryrepresentativeorlocal servicecompanytoperformmaintenanceandrepairs.

TROUBLESHOOTING

ProblemMightbeCausedByCourseofAction
Gassmell.Unknowncause.		Turnoffthemainsupplyvalve,ventthearea, callaqualifiedserviceagent.
Burnerdoesnotlight.Pilotburnernotlit.		Wait5minutestoallowgastodissipate,then lightthepilotburner.
Cookingsurfacesmokesexcessively.Cookingsurfacenotcleaned.		Allowthecookingsurfacetocooldownand cleanwhilestillwarm,thenseasonthetop.
Cookingsurfaceistoohot.Insufficientventilation.		Ensureaminimumof6"ofspaceisallowedon thebackoftheequipment.
Unevencookingsurfacetopheating.	Insufficientventilation.	Ensureaminimumof6"ofspaceisallowedon thebackoftheequipment.
	Airshutternotproperlyadjusted.ContactVollrathtechnicalservice.
Burnernotoperatingproperly.	Orificecontaminated.	Contactanauthorizedserviceagenttoservice theburner.
	Airshutternotproperlyadjusted.ContactVollrathtechnicalservice.

Thispageintentionallyleftblank.

SERVICEANDREPAIR

Serviceablepartsareavailableonwww.vollrath.com.

To avoid serious injury or damage, never attempt to repair the unit yourself. Either contact a qualified service agent for the repair or contact Vollrath Technical Services for instructions. The appropriate phonenumber is listed at the bottom of the page.

When contacting Vollrath Technical Services, please be ready with the item number, model number (if applicable), serial number, and proof of purchaseshowingthedatetheunitwaspurchased.

WARRANTYSTATEMENTFORTHEVOLLRATHCO.L.L.C.

This warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company L.L.C. does not offer a written warranty top purchasers for such uses.

The Vollrath Company L.L.C. warrants the products it manufactures or distributes against defects in materials and workmanship as specifically described in our full warranty statement. In all cases, the warranty runs from the date of the end user's original purchase date found on the receipt. Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will not be recovered under warranty.

Forcompletewarrantyinformation,productregistrationandnewproductannouncement,visitwww.vollrath.com.

Outperform every day:

www.vollrath.com

The VollrathCompany, L.L.C.

1236North18thStreet

Sheboygan, WI53081-3201U.S.A.

MainTel:800.624.2051or920.457.4851

MainFax:800.752.5620or920.459.6573

CustomerService:800.628.0830

CanadaCustomerService:800.695.8560

TechnicalServices

[e-mail]

InductionProducts:800.825.6036

CountertopWarmingProducts:800.354.1970

AllOtherProducts:800.628.0832

Service moyen

Service sévère

Conforms to ANSI STD Z83.11-2016 Certified to CSA STD 1.8-2016

Conforms to NSF/ANSI STD 4

Outperform every day:

www.vollrath.com

The Vollrath Company, L.L.C.

1236 North 18th Street

Sheboygan. WI 53081-3201 U.S.A.

Main Tel: [phone] or 920.457.4851

Main Fax: [phone] or 920.459.6573

Customer Service: 800.628.0830

Canada Customer Service: 800.695.8560

Technical Services

[e-mail]

Induction Products: 800.825.6036

Countertop Warming Products: 800.354.1970

All Other Products: 800.628.0832

Servicio mediano

Servicio pesado

Conforms to ANSI STD Z83.11-2016 Certified to CSA STD 1.8-2016

Conforms to NSF/ANSI STD 4

Outperform every day:

www.vollrath.com

The Vollrath Company, L.L.C.

1236 North 18th Street