BE-380124 - Hair Straightener Huslog - Free user manual and instructions

USER MANUAL BE-380124 Huslog

QR code image with a central circular logo, likely linking to a digital resource or website.

A B C D E F G

Hair straightener with display

Batch No.: 613104

Equipment Delivery Point:

mPTech Sp. z o.o.

street Krakowska 119

50-428 Wrocław

Poland

Designed in Poland

Made In China

Manufacturer:

mPTech Sp. z o.o.

1. Safety of use 9
2. Specification....11

2.1 Technical data.... 11
2.2 Contents 11

1. Structure of the device 11
2. Use of the device.... 12
3. Troubleshooting....13
4. Cleaning and maintenance of the device....14
   7.Explanation of symbols 14
5. Use of the manual....15
6. Warranty and Service .... 15
7. Declaration of conformity with EU directives 15

1. Safety of use

WARNING

The surfaces of the device can become very hot!

Please use caution during use!

—INTENDED USE—

The device is designed to straighten human hair or create

curls. The product is not intended for use on animal hair or objects. The device is intended for indoor use only and may not be used for commercial purposes – any other use will be considered inappropriate and therefore dangerous.

The manufacturer is not responsible for injuries resulting from improper use of the device.

—IMPORTANT SAFETY INSTRUCTIONS—

The device can be operated and cleaned by children over 8 years of age and people with limited mental or physical dispositions only when they are under the supervision of caregivers or after handing over the instructions for use of the device1 in a safe way, understanding the danger posed by the use of the device. The device is not a toy for children. Disconnect the appliance from the power grid before cleaning or maintaining it. Maintenance and cleaning of the product should only be carried out by or under the supervision of adults. If the power cord is damaged, it must be replaced by the manufacturer's service, service centre representative or qualified persons.

—DO NOT RISK—

The device is intended for indoor use. Do not use the device in areas where the use of electrical equipment is prohibited and where it may cause interference or other hazards. Do not switch on or use the appliance near flammable materials. Do not place any flammable objects on the device - this may damage the device or even cause a fire. Do not move a switched-on device. For safety, connect the device to a network with a residual current device with a sensitivity of max. 30mA The electrical connection may only be made by an authorized electrician. The electrical connection should meet the requirements of applicable law.

—SURROUNDINGS—

Make sure that children under 8 years of age and pets are not left unattended in the vicinity of the operating device, because during operation, the internal and external surfaces of the device heat up strongly – there is a risk of burns, and the power cord may cause tripping, tipping over or other injuries.

—WATER AND OTHER LIQUIDS—

Do not expose the appliance to water or other liquids. This may adversely affect the operation and service life of electronic and electrical components. Avoid working in an environment with high humidity – steamed kitchens, bathrooms, as well as water droplets from other sources can cause moisture to appear in the housing of the device, and this can lead to damage to the device, and in extreme cases, electric shock.

When using the appliance in the bathroom, unplug the power cord from the power socket after use. Proximity to water poses a risk even if the appliance has been switched off.

—PROFESSIONAL SERVICE—

This product may only be repaired by a qualified manufacturer's service or an authorized service centre. Repair of the device by an unqualified service or by an unauthorized service point may result in damage to the device and loss of warranty. The manufacturer is not responsible for problems caused by self-modifications made by the user.

2. Specification

2.1 Technical data

Hair straightener with display
Model	BE-380124
Batch number	613104
Power	50W
Power supply	110-240V ~ 50-60 Hz
Additional	LED display

2.2 Contents

☐ Hair straightener with display
User Manual

If any of the above items are missing or damaged, please contact your dealer.

We recommend to keep the packaging in case of any complaint.

It is possible to download the electronic version of the user manual from the following Internet address:

https://huslog.eu/

Or by scanning the QR code:

QR code image containing encoded data, no visible human-readable text

3. Structure of the device

A B C D E F G

A) Top handle with plate
B) Bottom handle with plate
C) Temperature control
D) Power button

E) Display
F) Lock
G) Swivel power cord with hanging clip

4. Use of the device

Before operating the device, ensure that your hands are not wet. The device should remain unplugged from the power source.

Ensure that the cord is routed in such a way that it cannot be damaged, cut, bumped or pulled, which could cause damage to the device or injury to the bystanders.

If you notice that the housing, cord or power plug is damaged, then do not turn on the device.

Be careful that water does not get inside the housing of the device! This is an electrical appliance, and water can cause a short circuit that can damage the

appliance or cause electric shock.

PREPARATION FOR FIRST USE

Remove the appliance from the packaging, remove the protective foil bag and unroll the power cord. Make sure that there are no objects and other materials that are not resistant to high temperature in the vicinity of the intended place of use of the product.

If the appliance housing and the power cord have no visible damage, plug the power plug into the mains socket.

The device has a rotating power cord with a hook, thanks to which it can be hung, for example, on a hook (not included) when not in use. When suspending the device, pay attention to whether there is no risk of accidentally knocking it off or pulling on the power cord. The device should be out of reach of children when not in use

To turn on the device, press and hold the power button for about 3 seconds. Immediately after switching on, set the desired operating temperature by briefly pressing the temperature adjustment buttons. Adjustments can be made in the range of 120-230 °C. Briefly pressing the P button switches between three predefined temperature settings – 120-180-230 °C. The selected temperature will be shown on the display.

To turn on the device, press and hold the power button for about 3 seconds. The straightener switches off automatically 60 minutes after switching on.

After use, disconnect the device from the power source, leave to cool, and then store them in a safe place.

USE OF THE PRODUCT

The device should be used on clean and completely dried natural hair.

Take special care when using the device – its surfaces may get very hot. Avoid contact of straightener plates with exposed skin. Especially around the ears, face and neck.

Wide range of product operating temperature control and instant heating technology ensure versatility of styling for all hair types. If you have thin hair, low temperature will provide the best results. If you have thick, wavy or difficult to straighten hair, set the temperature at a high level. Set the temperature of the straightener to suit your needs.

Temperature	Hair type
110-140°C	Thin, delicate, easy to style hair
150-180°C	Hair of medium thickness or subjected to hairdressing treatments
190-200°C	Thick or wavy hair
210-220°C	Hair difficult to style
230°C	Coarse or difficult to style

For best results, use a light styling product before drying your hair. Divide the hair into easy to arrange strands, clamp the top layers on top of the head so that they do not interfere. Take care of the bottom layer first. Open the straightener and place a strand of hair between two hot plates, close to the scalp. Grab your hair with the straightener plates by firmly squeezing the handles. For convenience, you can use the lock by pressing its button after clamping the handles. While maintaining pressure, slowly drag the device along the hair strand towards its end. At the end, release the pressure on the handle and let the hair slide out. Repeat this on successive parts of the hair until you get the desired hairstyle. Depending on the structure of your hair, this may need to be repeated in certain areas.

In addition, while holding the hair strand between the straightener plate and rotating around its axis (2-3 times depending on the length of the hair), move the straightener slowly downwards. In this way, you get the opportunity to create the effect of curly hair.

Learning to use the product requires some practice. After using the device several times, you will learn the perfect way to straighten and style your hair.

5. Troubleshooting

In case of problems with the device, please refer to the following tips.

This device does not contain any parts that can be repaired by users.

The device does not switch on even when plugged into the power grid	Check that the plug or power cord is not damaged.Check the correct connection of the plug to the mains socket.Check that the electrical outlet is not damaged – select another one.
If the problem has not been resolved, please contact the manufacturer's service.

6. Cleaning and maintenance of the device

WARNING! The appliance cannot be immersed in water or washed under running water!

Before cleaning the appliance, make sure that your hands are dry and the appliance is to cool down and disconnected from the power grid.

The device is maintenance-free.

Clean the appliance with a soft cloth slightly dampened with water, then dry with a dry cloth or paper towel.

Do not use detergents, solvents or abrasives to clean.

7. Explanation of symbols

The packaging of the device can be recycled according to local requirements.

Symbol indicating corrugated board (packaging mat.).

The symbol indicates that the package contains a usermanual which must be read before use.

WARNING! Do not use this appliance near baths, showers, sinks or other tanks filled with water.

For indoor use only

Symbol indicating a device of protection class II with double insulation (for the power supply).

The mark placed on the product means that this product complies with the basic requirements and other provisions of the so-called “New Approach” of the European Union.

The device is marked with the symbol of a crossed-out garbage container, in accordance with the European Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). Products marked with this symbol should not be disposed of or disposed of with other household waste after their time of use. The user is obliged to dispose of waste electrical and electronic equipment by delivering it to the designated point at which such hazardous waste is recycled. The accumulation of this type of waste in indicated places and the proper process of its recovery contribute to the protection of natural resources. Proper recycling of waste electrical and electronic equipment has a beneficial effect on human health and the environment. For information on where and how to dispose of waste electrical and electronic equipment in an environmentally safe manner, the user should contact the relevant local authority, waste collection point or point of sale where he purchased the equipment.

8. Use of the manual

Without the prior written consent of the manufacturer, no part of this manual may be reproduced, distributed, translated or transmitted in any form or by any electronic or mechanical means, including by photocopying, recording or storing in any storage and information-sharing systems.

The illustrations of the device in this user manual may differ from the actual product.

All brands and product names are trademarks or registered trademarks of the respective companies.

9. Warranty and Service

The product has a 2-year warranty, starting from the date of sale of the product. In the event of a defect, the product should be returned to the store where it was purchased, remembering the need to present proof of purchase. The product should be complete and preferably placed in its original packaging.

10. Declaration of conformity with EU directives

Hereby mPTech Sp. z o.o. declares that this product complies with the basic requirements and other provisions of the Directives of the so-called “New Approach” of the European Union.

BEDIENUNGSANLEITUNG

QR code image containing encoded data, no visible human-readable text

A B C D E F G

QR code image with a central circular logo, likely linking to a digital resource or website.

A B C D E F G

QR code image with a central circular logo, likely linking to a digital resource or website.

A B C D E F G

QR code image with a central circular logo, likely linking to a digital resource or website.

A B C D E F G

A) Porta piastra superiore con piastra riscaldante

B) Porta piastra inferiore con piastra riscaldante