LCT 50 PSX - Microphone Lewitt - Free user manual and instructions

USER MANUAL LCT 50 PSX Lewitt

Recording Microphones

Enfuhrung

Nephrosis important:

Soisespanning:

• Strausaufnahme:

-Stocksinger

+ Abmssuugnccn

• Nettogewicht:

0dB.10dB,20dB schaithar

12dB/Okaye bei 40Hz

Regulatory information

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Manufacturer Details LEWITT GmbH Burgasse 79 1070 Vienna, Austria

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of conformity can be requested at [e-mail].

LCT 140

Introduction

Thank you that you have opted for a LEWITT product. In this operating manual you will learn more about your LEWITT microphone, its handling and its proper usage.

We've put: our knowledge and all our passion for audio technology into building microphones for people whose standards for their own audio work and performances are just as high as our own. With the LCT Authentica series, LEWITT introduces a new generation of highly versatile wired condenser microphones that all aim for one thing and one thing only: to set new benchmarks of technology, sound quality and user-friendliness in both professional studio recording and onstage use. The mics of the Authentica series - especially the LEWITT LCT 640 - employ innovative technologies and a multitude of possible settings to offer a crystal clear, authentic and characteristic sound for every imaginable application.

Day after day, be it for live acts, in home studios or in professional studio productions.

LEWITT wishes you a lot of fun and success with this product!

LCT140

The product

The LCT 140 is an extremely versatile, easy-to-use, compact 2/3-inch back-electric condenser microphone, perfectly suited for quality-conscious casual users. Its lawmass diaphragm delivers an exceptionally clear and natural sound, making it the perfect fit for a wide range of live and studio applications including drums and percussion, acoustic instruments or even vocal ensembles.

Thanks to its high-quality cardiolip pickup pattern that effectively suppresses off-axis sound, a wide dynamic range of 124 dB and its very low self-noise level, the LCT 140 adds transparency and distortion-free detail to every sound recording. The model's transformerless output design, which makes it immune to electromagnetic interference, and LED displays that can optionally be switched on and off, make the LCT 140 an extremely comfortable all around nic.

12

LCT 140

features / Top applications

Features

Cardioid pickup pattem for effective isolation of the intended sound source and minimal background noise
- Dynamic range of 124 dB and very low self-nose level - Reduced side switch for attenuation and RF selection
- recessive side switch for attenuation and H^+ selection - Immune to electromagnetic interference thanks to transformless output stage
LED displays (can be optionally switched off) for quick indication of current settings
Cold-plated 3-pin XL R output connector
Hexagonal steel-mesh grille with matte black finish

• Comes in a cardboard box with foam layers; includes DTP 40 Mts shock mount, LC1 40 Ws windshield and DTP 40 Lb leather bag

Top applications

Home recording, studio recording
Theatre, onstaging

13

LCT140

User-interface

⑤ Illuminated attenuation indications
Recessed alternation slide switch
③ Illuminated high-pass filter indications ④ Damping High-pass filter included
4. Recessed high-pass filter slide SAI5. Percent image distortion purity butts

Attenuation indications

• The currently active attenuation setting is illuminated.

Setting an attenuation level

Attenuation levels can be set by adjusting

recessed slide switch. Settings are: aff, -10 dB and -20 dB. Attraction is used in extremely high SPL environments in order to prevent clipping of the microphone, mixer and other audio equipment.

Using the mac

High-pass filter indications

The currently active high-pass setting is illuminated.

Setting a high-pass filter

• High-pass filters can be set by adjusting the recessed slide switch. Settings are: Dif. 12 dB; octave at 40 Hz and 6 dB; octave at 300 Hz. High-pass filters eliminate unwanted low frequency noise such as structure noise.

Illumination push button

• Sybriefly pressing the recessed illumination push button the illuminated indications can be turned on or off.

front side

LCT 140

Techdata
Tech graph Dimension

15

LCT140

Techdata

Tech data

Acoustical operating principle:
Transducer:
- Directional pattern
Frequency range:
Sensitivity:
Signal noise ratio:
Edualie hoeie level
Dynamic range of the. 10mL pipette

pressure gradient transducer,
permanently polarized
17mm
0.67inc
cardiol
30…20,000Hz
8mV/Pa-42dBV
75dB-8
19 dB-A cardidic (EC 61672-1)
12408-9
143.0dB prefatmation
153.0010d8wralquluo
163dB,20dB prettualation

• Preattenuation pad:
• Bass cut filter slope:

Rated impedance:
Rated load impedance:
Supply voltage:
Current consumption:
·Contact:
·Dimension

Net weight:

10dB,20dB switchable
12 dB/ octave at 40 Hz
6 dB /actwe at 300 Hz
<150ohms

1,000chrs
48V+/-4V(IEC61938)
5.3mA（IEC61938）
gold plored 3-pin XL8
24 dia.x160mm
0.94 dia.x6.3 inch
195g
6.880g

LCT 140

Accessories

Accessories

LCT 40 Ws

DTP 40 Mts

DTP 40 Lb

Cautions

• The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress
  To ensure high sensitivity and best sound reproduction of the microphane, avoid exposing it to moisture, dust or extreme temperatures.
• Keep this product out of the reach of children.
• Do not use force on the switch or cable of the microphone.
• When disconnecting the microphone cable, grasp the connector and do not pull the cable.
• Do not attempt to modify or fix it. Contact qualified service personnel in case any service is needed. Please do not disassemble or modify the microphone for any reasons as this will void users warranty.
  The case of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning. If necessary the
  Joan with stopper can be washed with soap water. Please wait till it is dry before using it again.. Also - please refer to the owner's manual of the component to be connected to the microphone.

Warranty

All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt.

LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at LEWITT's discretion either by repair or by exchanging individual parts or the entire appliance. Any defective parts removed from a product during the course of a warranty claim shall become the property of LEWITT GmbH.

While under warranty period, defective products may be returned to the authorized LEWITT dealer together with original proof of purchase. To avoid any damages in transit, please use the original packaging if available. Please do not send your product to LEWITT GmbH directly as it will not be packaged. Freight charges have to be covered by the cargo of the product.

Certain products manufactured by LEWITT GmbH feature a limited five-year warranty. For this five-year warranty the same conditions as listed for the two-year warranty are applicable.

For further information please visit www.ewitt-audio.com or check your warranty card.

Regulatory information

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Manufacturer Details LEWITT GmbH Burgasse 79 1070 Vienna, Austria

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of conformity can be requested at [e-mail].

LCT 140

Intruduzione

Home recording, studio recording

• 1

Percussioni

• Platto

LCT140

Luo del microfome

Interfaccia utente

10dB,20dB (selectionable)

Regulatory information

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Manufacturer Details LEWITT GmbH Burgasse 79 1070 Vienna, Austria

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of conformity can be requested at [e-mail].

LCT 140

Introduction

Characteristics/ Applications

Characteristics Techniques

Regulatory information

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Manufacturer Details LEWITT GmbH Burgasse 79 1070 Vienna, Austria

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of conformity can be requested at [e-mail].

LCT 140

Intruduccin

• Diagram directional:

0dB,10dB,20dB carmutable

12dB/ocetayasa40Hz

6 dB / octas a 300 Hz

<150.0bnm

1,000Ohmips

48V+/-4V（EC61938）

5.3rA（EC6193B）

X1Bdm3nines htp

24 dia. x 160 mm

0.94 dia×6.3 muller

0.4G 185

638

LCT 140

Accesorios

LCT 40 Ws

DTP 40 Mts

Accesses

DTP 40 Lb

Regulatory information

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Manufacturer Details LEWITT GmbH Burgasse 79 1070 Vienna, Austria

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of conformity can be requested at [e-mail].